Happy new year 2013 to all my moderrators and developers and memebrs of xdadevelopers
i want to start this topic by discussing if there is a stock recovery for jelly bean ruu RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1 204.168.32_release_299688_signed.exe.
because after i releocked my phone and flashed Ruu in windows. i was given back stock rom with stock recovery. but i didnt follow the process of doing temp recovery as as a result cause i didnt see the option while unlocking the bootloader. so now what i did was . installed TWRP international Recovery and perm rooted the phone again
Now what chance is there i can continue with stock ota updates in future or
Do you My fellow members know where the link to get stock reovery image for 1.17.401.1 update for the htc one x+. fyi my carrier is wataniya , kuwait.
thanks
[Q] Updating rom or firmware/radio from 1.13.651.1 to 3.15.651.13? Rooted & S-OFF
Hi XDA,
I just obtained LazyPanda S-OFF (after being rooted and HTCDev Unlocked/S-ON since I got my phone)
I'm still on my original rom and firmware my phone got shipped with, never took an OTA (thank god)
I have Titanium Backup PRO, and TWRP v2.4.1.0 (the latest version)
(I read that someone had to downgrade TWRP to v2.3.3.0 to install the newest JB rom - took him 3 hours of trying with TWRP v2.4.1.0 until he tried v2.3.3.0 and it worked) - Link: http://forum.xda-developers.com/showthread.php?t=2045929&page=62
Has anyone successfully flashed the new JB rom with the latest TWRP?
AND
If I flash the odexed rom (from -viperboy-) will that include the firmware & radio? If not, should I flash the firmware that won't update/include the newest HBoot? (or do I need the new HBoot?) I'm on LazyPanda's 1.12 (v1.12.xxx - the modded version) Or because I'm S-OFF it doesn't matter if HBoot gets updated/overwritten because I'll still retain root & S-OFF?
I just want to know what files to install, and how to install them properly (please include links and good directions) I already watched wwjoshdew's videos on YouTube.
Thanks in advance, zmag
Roms do not include firmware/radios.
The firmware updates are found here READ thru the last 10-20 pages before you flash any firmware...better to be safe then sorry.
When you are ready to flash use the Full Firmware
There is no need to update your hboot.
I have all my firmware updated including the touch panel drivers and I can use twrp 2.4.1.0 but if you update the touch panel drivers you can ONLY use roms based on 3.16. In order to flash a 3.15 JB rom you would have to flash the older touch panel drivers and use an older version of twrp AFAIK
Re: [Q] Updating rom or firmware/radio from 1.13.651.1 to 3.15.651.13? Rooted & S-OF
You can update firmware from my thread by flashing the latest (3.16) firmware.
As far as ROMs go, with TWRP 2.4.1.0 you won't be able to flash 3.16-based ones with an outdated update binary. If you want a 3.16-based ROM, you can flash MeanBean, or my stock rooted.
If you want to flash a 3.15 base ROM, that should be no problem.
Thank you for the heads up guys!
So I'm going to update just the firmware/radio for now: (with this file) PJ75IMG_Jewel_3.16.651.3_firmware_extended.zip - correct? (Sorry just making sure)
Re: [Q] Updating rom or firmware/radio from 1.13.651.1 to 3.15.651.13? Rooted & S-OF
zmag said:
Thank you for the heads up guys!
So I'm going to update just the firmware/radio for now: (with this file) PJ75IMG_Jewel_3.16.651.3_firmware_extended.zip - correct? (Sorry just making sure)
Click to expand...
Click to collapse
Yes, that is correct.
Thank you for guiding me through this captain throwback, I _finally_ did my first firmware update and everything works great.
I'm still on the original rom, until I decide if I want to update to JB (the touchscreen drivers are what's making me nervous to be honest)
All in all, thank you! I'll read through your thread and direct any further questions there if necessary!
So if I want to install MeanBean, and update the Firmare to 3.16, I can flash MeanBean first, then update the Firmware, correct?
I am on the stock firmware, running the stock OS, and have not taken any OTA's. Is there an issue with flashing the most current firmware, or do I have to "step up" by flashing older firmware updates in sequence until I get to the most current?
Thanks
Re: [Q] Updating rom or firmware/radio from 1.13.651.1 to 3.15.651.13? Rooted & S-OF
mr0roboto said:
So if I want to install MeanBean, and update the Firmare to 3.16, I can flash MeanBean first, then update the Firmware, correct?
I am on the stock firmware, running the stock OS, and have not taken any OTA's. Is there an issue with flashing the most current firmware, or do I have to "step up" by flashing older firmware updates in sequence until I get to the most current?
Thanks
Click to expand...
Click to collapse
As long as you use the firmware zips from my thread, you can flash the latest firmware with no problems. The order of flashing ROM versus firmware shouldn't matter.
Can someone please explain me how I can flash the new vodafone firmware that was released recently.
and if i flash the original firmware will my hboot and radio update automaticaly?
and how can i flash the boot.img?
Right know I am on ARHD with the latest elitekernel
I have a firmware question that I can't seem to find the answer to by searching. I am running arhd 11 on an att HTC one. Should I upgrade the firmware on my phone? Will there be any benefits to this since I am on att and not international? Also how do I go about updating the firmware and does it wipe the device? If I should upgrade, what it's the version I should download? Longtime Samsung user so please excuse the noobness.
If alls running well, then plz avoid ... however, in ARHD thread many AT&T users have updated the firmware without any side-effects
Best to post Q in that thread itself
asjshenry said:
I have a firmware question that I can't seem to find the answer to by searching. I am running arhd 11 on an att HTC one. Should I upgrade the firmware on my phone? Will there be any benefits to this since I am on att and not international? Also how do I go about updating the firmware and does it wipe the device? If I should upgrade, what it's the version I should download? Longtime Samsung user so please excuse the noobness.
Click to expand...
Click to collapse
It is currently not mandatory to flash the new firmware for ARHD, but it does provide a noticeable increase performance depending on the current firmware version you are running, I was running 1.26 on my AT&T m7 and the screen and touch buttons have been much more responsive now that I am running the new 2.24. Flashing the new firmware will also update the baseband, providing you with the latest radio (but performance of this will vary from region to region.
If you go to this link, it will give you some great instructions on the update process.
http://forum.xda-developers.com/showpost.php?p=42556698&postcount=24958
BTW, you will need to be s-off and change your cid to 11111111. As long as you take your time and follow the directions completely you will be fine. If you do update make sure you flash the firmware TWICE when it says to, and make sure you re-flash your custom recovery because it will get replaced during the updating process. This process will not delete your sd card and you will be able to run your current ARHD, but it is recommended to do a clean install after. And you might as well since 12.0 is out.
hope this helps
I'm getting a failed not allowed error when trying to 'fastboot flash zip'
I successfully have s-off and changed CID but can't get firmware to flash
Edit: not sure what happened but I was able to push the zip successfully. Maybe from adding the path of the file instead of just the zip file? Anyway, it worked.
Sent from my HTC One using xda premium
IF the rom is tweaked right theres no real reason to update the firmware to euro build,Id wait till att variant or the dev variant gets the update and then worry about it.
Why its so hard to find OTA file for 4.3 Update for At&t on internet, only RRU is present? I read its a 567mb file.
I have searched everywhere for OTA dump, but its not there even on htc1guru.com, other regional variants 4.3 OTA files are present.
Also surprisingly the next OTA (4.4 Sense 5.5 and sense6 ) are there for At&t but not (3.17.502.3) .
I don't wanna do a RUU flash as i will loose all my data and currently i am on Stock 4.1 with S-on.
Please let me know if anybody can find a OTA file for the above so that i can update via recovery mode in device only.
Thanks.
anirudhgargi said:
Why its so hard to find OTA file for 4.3 Update for At&t on internet, only RRU is present? I read its a 567mb file.
I have searched everywhere for OTA dump, but its not there even on htc1guru.com, other regional variants 4.3 OTA files are present.
Also surprisingly the next OTA (4.4 Sense 5.5 and sense6 ) are there for At&t but not (3.17.502.3) .
I don't wanna do a RUU flash as i will loose all my data and currently i am on Stock 4.1 with S-on.
Please let me know if anybody can find a OTA file for the above so that i can update via recovery mode in device only.
Thanks.
Click to expand...
Click to collapse
Their was actually a 3.10.502.2 Leak / RUU before the 3.17.502.3
I have nearly every RUU / Reset / OTA for the AT&T One but none for those 2 OTA releases. Sorry
no ota but there is an decrypted ruu