Related
Here We have the Root And CWM for Nexus 10 On Android 4.2.2!
Step 1 - Download Android SDK from the Android Developers website and install with USB drivers. See: How to Set Up Android SDK (Fastboot / ADB) on Windows.
Step 2 - Enable USB Debugging mode in your Nexus 10 tablet.
Step 3 - Download Fastboot and extract it in android-sdk-windowsplatform-tools directory. Create directory if not already there.
NOTE: Skip Steps 1, 2, 3 if you already have them.
Step 4 - Download SuperSU v1.04 (UPDATE-SuperSU-v1.04.zip) and copy it to your sdcard on your Nexus 10 tablet.
Step 5 - Make sure you have backup your data as it will be removed. Then switch OFF your Nexus 10.
Step 6 - Download recovery-clockwork-touch-6.0.2.3-manta.img and copy/paste it in the android-sdk-windowsplatform-tools directory.
Step 7 - Now go into Fastboot Mode on Nexus 10. How? Press Volume Down + UP + Power key for a few seconds till you see some text on the screen.
Step 8 - Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click > Open Command Prompt).
Step 9 - Type in the following command and press Enter.
fastboot flash recovery recovery-clockwork-touch-6.0.2.3-manta.img
Click to expand...
Click to collapse
Step 10 - Once completed, choose RECOVERY MODE from the Fastboot menu and enter Recovery Mode.
Step 11 - Then scroll down to “flash zip from SD card” and press the Power button to select it.
Step 12 - Press the Power button again and select “choose zip from sdcard”.
Step 13 - Now using your volume keys, navigate to the UPDATE-SuperSU-v1.04.zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 14 - After the installation completes, go to “+++++Go Back” and reboot the phone by selecting “reboot system now” from the recovery menu. Then Choose yes flash recovery back (this will make CWM your permanent recovery mode)
That’s it. Your Nexus 10 is now rooted on Android 4.2.2 JDQ39 software version of Jelly Bean and even has a custom CWM recovery installed. Check for the SuperSU app in your apps list to verify.
Root and CWM for Nexus 7
Root and CWM for Nexus 4
Reserved...
Thanks udi, but could you also post how to do it on stock rom with stock recovery? Much appreciated! I keep wathing your youtube videos lol :good:
lKBZl said:
Thanks udi, but could you also post how to do it on stock rom with stock recovery? Much appreciated! I keep wathing your youtube videos lol :good:
Click to expand...
Click to collapse
what do u want root or recovery??
AW: [How-to]Root Android 4.2.2 And Install CWM
lKBZl said:
Thanks udi, but could you also post how to do it on stock rom with stock recovery? Much appreciated! I keep wathing your youtube videos lol :good:
Click to expand...
Click to collapse
I think you have to unlock your device first. Then you can easily install your custom recovery
how do I install TWRP now?
never mind was trying to flash a .TAR file this wayyy... figured it out. need a .img
Use the nexus 10 toolkit
Side Load via adb,
then re run the everything script in toolkit.
Worked like a charm for me, however, I did have to reflash back to my first backup, to be on stock 4.2.1 with stock kernel
mrdunlop said:
Use the nexus 10 toolkit
Side Load via adb,
then re run the everything script in toolkit.
Worked like a charm for me, however, I did have to reflash back to my first backup, to be on stock 4.2.1 with stock kernel
Click to expand...
Click to collapse
did it work for 4.2.2 ? i was rooted with 4.2.1 but the OTA screw it up.. i have to recover to factory .. then OTA ｔｏ ４．２．２
ｃｏｕｌｄ ｙｏｕ ｐｌｅａｓｅ ｂｅ ｍｏｒｅ ｓｐｅｃｉｆｉｃ ？
followed this method last night and got my tablet rooted with TWRP's recovery!
epunk said:
followed this method last night and got my tablet rooted with TWRP's recovery!
Click to expand...
Click to collapse
Glad that It's working!
Download Fastboot?
I cant download Download Fastboot... I have been denied access??? little help over here please I wanna root my device on 4.2.2... Thanks in advance!
just did the same thing with my n7, worked out easily on my mac !
#1 thanks a lot dude
Mr_Jay_jay said:
I cant download Download Fastboot... I have been denied access??? little help over here please I wanna root my device on 4.2.2... Thanks in advance!
Click to expand...
Click to collapse
http://www.mediafire.com/?lt8ghch95u5abgo fastboot files!
hope this one works :fingers-crossed:
I followed your method and got:
1.- Clockworkmod E:can't mount /sdcard/
2.- System stuck at Nexus X logo
What do I do now?
[update]
1.- Got factory image: https://developers.google.com/android/nexus/images#mantaray
2.- Ran "flash-all.bat" from the tgz
3.- Flashed recovery-twrp-2.4.2.0-manta.img
4.- TWRP asked if I wanted to install SU, I said yes
5.- Happy days.
Sorry if this has already been asked and I'm not understanding it.
I bought my mom a Nexus10 and it's missing some Indian fonts on it. I saw I need to flash on a fontpack to add them.
The tablet is totally stock, on 4.2.2..
Do I need to unlock the bootloader first (which wipes all the data) and then do the steps from the 1st post?
This whole process is not working for me. I am in windows 8 and it just doesnt let me install sdk nor even ask me to install drivers. Can you suggest what is the possible way out? I am unable to move ahead due to these issues :/
Root failed.
I followed all instructions (I have successfully rooted a number of smartphones and the Nexus 7 before this). The end result is that the Nexus 10 is unlocked, but hangs on bootup with just the X showing. I can't go into Recovery mode (I just get the Android lying on his back with an exclamation point showing and eventually it tries a normal boot - as far as the X).
I can't try Restart Bootloader as this, too, leads to just the X and hangs. I have reset the tab (power + down volume) and also have tried to reconnect the tab to the PC, which now does not recognize it, putting fastboot.exe and adb.exe out of reach. I think something might have gone wrong installing CWM, though it did boot up a couple of times after that with a couple of errors that passed by too fast to copy - before it started to hang. I never got a chance to put superuser on it as Recovery mode is out of reach. I tried a master reset the last time I got to Recovery Mode, but got several minor errors and now seem not to have ANY bootloader working. Short of sending the tab back to Google to have them restore a 'cherry' Android 4.2.2 (for a sum), I'm lost as to where to go next.
Any ideas?
s
paano po mag rooted ng myphone Rio fun
My recovery is lost when I did this!!!
I did this with adb....almost same step......now when try to go to recovery mode.....just logo......! I have to take battery out! so that I could boot into android.......when I accidently type -w which was for wipe,,,,,,,wiped thw whole phone..... now its just white screen when i boot into android......cant install new rom because recovery is lost.......what should I do now? help me please!
how to root s3mini 8200
I would be grateful of some help. I have successfully unlocked the Bootloader, flashed a custom kernel and rooted my Xperia Z Ultra on 4.4.2.
The problem I have is when trying to flash CM11 nightly using TWRP and CWM Recovery. I carry out the wipes in TWRP, then proceed to select the CM11 latest nightly to flash. On swiping the bar to begin the flash, the process fails and the following message displays:
"E: Unknown File System: 'datamedia'
Updating partition details...
Running book script...
Finished running boot script.
Installing '/external_sd/Xperia Root/CM11/cm-11
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
This package is for "C6802, C6806, C6833, C6843 to
E: Error executing updater binary in zip '/exter
Error flashing zip /external_sd/Xperia Root/CM
Updating partition details...
FAILED
(I think some of the text to the right of the window has been cut off)
When I Power Off my device in TWRP a message displays saying I don't have root, do I wish to install supersu. I went with this message and assume supersu installed when I powered off. However, on powering back on and re-entering TWRP and trying again, I am still unable to flash my CM11 zip.
I have also re-downloaded the CM11 zip, all to no avail.
To confirm, I can access TWRP and CWM, but can't install my CM11 nightly zip. I have tried installing from the internal SD to no avail.
pretty pixel said:
I would be grateful of some help. ...
Click to expand...
Click to collapse
Flash the boot.img from the ROM zip using flashtool and put the phone into fastboot mode. Hold the vol up key when connecting the ZU to the PC (phone powered off of cause) and select fastboot mode in flashtool flashing dialog. you will have to change to .img from .sin in the file open box
Thank you so much for the reply and support. I'm new to the ZU coming from a Samsung Galaxy Note 2, so please forgive my inexperience.
When you say "Flash the boot.img from the ROM zip", do you mean the CM11 nightly ROM? I only have the ZIP file downloaded from CM website.
Could you please explain the process in simpler terms please?
Thank you again
pretty pixel said:
Thank you so much for the reply and support. I'm new to the ZU coming from a Samsung Galaxy Note 2, so please forgive my inexperience.
When you say "Flash the boot.img from the ROM zip", do you mean the CM11 nightly ROM? I only have the ZIP file downloaded from CM website.
Could you please explain the process in simpler terms please?
Thank you again
Click to expand...
Click to collapse
Quick explanation of what the issue is:
Some kernels/recoveries are ported from the Z1 so tell the ROM installer script that it is running on the wrong type of phone. As you have a ZU (I hope) we can get around this by flashing a new kernel and recovery to the phone, this is the boot.img that you can extract from the ROM zip that you are trying to flash.
This assumes that the phone has an unlocked bootloader, if not you cant run a custom ROM
Save the ROM to the internal storage of the phone (I always use /sdcard/0/Downloads)
Open the CM ROM zip in 7zip/winzip/etc and just extract the boot.img to somewhere (desktop will do)
Open flashtool (https://unrestrict.li/flashtool)
Select the thunder bolt
Select fastboot mode
Select 'Select kernel to flash'
Open the folder where you saved the boot.img file, and change the file type at the bottom from *.sin to *.img and open boot.img
With the phone powered off connect to the PC while holding the vol up key
Wait for about 1-2 seconds (you will see OK in the main flashtool window)
Reboot into the new recovery and flash the ROM like normal
Thank you so much for your support. I will follow your instructions this afternoon, when I have some free time and report back
I've just followed your instructions and they worked perfectly! Thank you so much
After, I flashed the boot.img with Flashtool I was able to install the CM11 rom without issue And I now have a new recovery - CWM which is fine.
Am I correct in thinking that future CM11 zips should now install OK, without having to flash the boot.img each time?
Many thanks again.
pretty pixel said:
I've just followed your instructions and they worked perfectly! Thank you so much
After, I flashed the boot.img with Flashtool I was able to install the CM11 rom without issue And I now have a new recovery - CWM which is fine.
Am I correct in thinking that future CM11 zips should now install OK, without having to flash the boot.img each time?
Many thanks again.
Click to expand...
Click to collapse
Yep that is correct, and any other ROM should install just fine as well.
That's great, Thank you again
Through rooting and flashing CM11 on the Z Ultra, it's made it so much nicer to use and taught me lots too.
Install CM11 Z ULTRA
Ola amigo, se possivel faça um tutorial ensinando a flashear a cm 11 no Z ultra brasileiro.
Hi, Guys today I m going to show you how to root/ unlock bootloader/ Install CMW recovery / Install cm 10/11/AOKP/ Packman roms on your Lg l9 p765 , This tutorial is for complete noob, nothing to worry about, just follow the process, you will find it very easy, so lets get start
Before going to start remember
Lg P760= Lg p765- Nfc chip ( So dont get confuse in nos)
Lg L9 kit
https://drive.google.com/file/d/0B62BCAo0zJcASk1xWkhCTnFhUUk/edit?usp=sharing
Above zip file contains all necessary files
1) Vroot application
2) Root files
3) CMW 6.0.4.5
4) Fastboot driver
5) Lg L9 Drivers
So Download it & Extract on Drive
Before going to do anything, You must install driver first, So just double click on Lg Driver.exe in extracted folder, Follow the process n ur done
Now lets root our Device
1) Now go to extracted, Double click on v root.exe, Install it,
2) Open Vroot Application
3) Now enable USB Debugging on your Handset, Go to developers options Enable debugging
4) Now connect your phone via Usb cable
5) V root will automatically detect your phone
6) Now hit on green root button,
7) Application will show you root succesfull n your phone will reboot ( or may be not)
8) After reboot you will find couple of chinese application installed, just ignore that, install super su from google play & unistall
those applications,
9 )Done, Now you have rooted phone
Next step is unlocking Bootloader
1) Now go to extracted folder, Find root files folder, copy folder & paste it in your system drive ( In my Case c Drive)
2) Now connect you phone with usb debugging on
3) Now double click on open commant prompt
4) Now u have to enter following command ( type or paste ur call)
adb reboot oem-unlock
hit enter, ur phone will reboot into botloader mode,
now press volume up to unlock boot loader, after pressing vol + u will enter in fastboot mode
means ur bootloader is unlocked, done
at this time ur pc will detect ur phone as androide device, it will install driver automatically, if dont, then go to device manager, select androde
device, right click, update driver first select search automatically, if this process failed then u have to select brows my computer option, then
navigate to fasboot folder in extracted folder, this will install fasboot driver on ur device, now ur ready to install recovery
Now its time to Install CMW recovery
1) when ur in fastboot mode dont power off
2) Now u have to enter following command to install CMW recovery
fastboot flash recovery recovery-clockwork-touch-6.0.3.1-p760.img
hit enter & Done, congrats now u succesfully Install cmw on ur phone
3) now enter fastboot reboot to restart ur phone
4) at this stage ur phone will be factory reset, so let the process complete
5) Now u can install CM 10 varients on ur device with this recovery
6) To install cm 11 varients u need to update recovery, for dat install super su & Goomanager on ur device
7) then copy cmw 6.0.4.5 zip on ur ext sd
8) then open Goomanger press reboot recovery, u r phone will be reboot into CMW recovery
9) now go to install zip/ install zip from ext sd/ find zip file/ & install its (use vol + & Vol - to navigate, power button to select )
10) reboot ur phone & Done, Now u have CMW 6.0.4.5 touch installed on ur device, u can check by rebooting ur device in recovery by
Goomanager
For latest recovery
http://forum.xda-developers.com/show....php?t=2733471
Now lets Flash Custom Roms on ur Device
Rom links:
http://forum.xda-developers.com/showthread.php?t=2712249
1) Download both files rom and gapps
2) Copy to ext sd
3) reboot into recovery ( goomanager method)
4) then select
wipe data/ factory reset then select yes wipe all user data, then go back
5) then select wipe cache partition, then select yes wipe, then go back
6) then select advance, select wipe dalvik cache, then yes wipe dalvik cache, go back
7) then select install zip choose zip from ext sd, select ur rom zip,then select yes install,
8) done, let the process complete, it will take some time, after installation complete, reboot ur phone,
9) after intial setup, reboot to recovery, this time dont wipe or factory reset anything, just install gapps zip, then reboot
10) Finally done donnna done done, u have custom rom on ur device, do whatever u want
Enjoy.....!!!!!!
Disclaimer: All material provided in this tutorial belongs to their origional owners, all credit goes them, like artas, dhiru, mateo1111,pedja, nx...etc, i m just explaining the process as per my experience,
Does P765 India V20C work with the method to unlock bootloader???
yupp, it works, i m also on same baseband
Sent from my LG-P760 using XDA Free mobile app
What sw you had before unlocking?
Droideking said:
yupp, it works, i m also on same baseband
Sent from my LG-P760 using XDA Free mobile app
Click to expand...
Click to collapse
Hi what sw version you had installed before trying to unlock bootloader? I have the same problem and I have V20i. Thanks
dr.David said:
Hi what sw version you had installed before trying to unlock bootloader? I have the same problem and I have V20i. Thanks
Click to expand...
Click to collapse
Sorry for late reply, I didnt install any new build, i was on stock jb build with V20c baseband, thats it,
n u need to be on latest stock jb build for unlocking bootloader,
above method works on almost any baseband
there are lots of different methods for unlocking bl for l9,
simple one is, (on device)
if u r rooted,
then install teminal emulater
open that
type "sudo"
hit enter
then type " adb reboot oem-unlock "
device will boot into bootloader mode,
press volume up, done
then follow rest of process, as above.......
I got this message
Droideking said:
Sorry for late reply, I didnt install any new build, i was on stock jb build with V20c baseband, thats it,
n u need to be on latest stock jb build for unlocking bootloader,
above method works on almost any baseband
there is lots of different methods for unlocing bl for l9,
simple one is, (on device)
if u r rooted,
then install teminal emulater
open that
type "sudo"
hit enter
then type " adb reboot oem-unlock "
device will boot into bootloader mode,
press volume up, done
then follow rest of process, as above.......
Click to expand...
Click to collapse
This is the message I got:
:/ $ sudo
/system/bin/sh: sudo: not found
127|[email protected]:/ $ su
[email protected]:/ # adb reboot oem-unlock
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
and nothing happens !!!
dr.David said:
This is the message I got:
:/ $ sudo
/system/bin/sh: sudo: not found
127|[email protected]:/ $ su
[email protected]:/ # adb reboot oem-unlock
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
and nothing happens !!!
Click to expand...
Click to collapse
sure u have rooted phone & super su & busybox installed
if yes then
again open terminal
type "su"
hit enter
accept su permission
then type
adb reboot oem-unlock
thats it
hope this time it will work.....
sorry for above post, sudo command can not use in this method
still no succes
dr.David said:
This is the message I got:
:/ $ sudo
/system/bin/sh: sudo: not found
127|[email protected]:/ $ su
[email protected]:/ # adb reboot oem-unlock
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
and nothing happens !!!
Click to expand...
Click to collapse
It doesn't work !
Maybe my bootloader it's encrypted. Donno...If you have any other ideas...I am open to sugestions. Thank you !
dr.David said:
It doesn't work !
Maybe my bootloader it's encrypted. Donno...If you have any other ideas...I am open to sugestions. Thank you !
Click to expand...
Click to collapse
ok,
try last time
this time dont use adb
just
reboot oem-unlock
try this, if dont work, will try another method
which l9 varient u have?
variant
Droideking said:
ok,
try last time
this time dont use adb
just
reboot oem-unlock
try this, if dont work, will try another method
which l9 varient u have?
Click to expand...
Click to collapse
LG L9 P760 aug/2013
sw: V20i-eur-xx
hidden menu boot-loader state: lock
I tried your last suggestion, the phone turned of and nothing happened
Thanks for your help so far
Updated P765 -v20C(Indian Version) to CM11 -Kang by Dhiru
Hi All,
First of all Thank you Droideking for the detailed guide for a noob like me. :good::good:
I have updated my L9 p765 Indian version with baseband version 20c (latest JB Update India) to CM11. I have used the ROM - UnOfficial CyanogenMod 11 [KANG] 11 by dhiru1602. The experience is awesome. The GUI is liquid smooth no lags unlike the stock ROM.:victory:
About the guide I would like to confirm that it worked absolutely fine for my Indian Version p765 with v20c baseband. There were no restarts encountered in fastboot mode. Only thing which happened was that when i was running adb command in the command prompt i got the error on command prompt saying adb is outdated please update. The error was gone when i ran the command prompt with run as admin option in windows. Also i used RomManager instead of GooManager as it was not available on playstore.
One more observation - Droideking, in the guide you have mentioned that install gapps after installing ROM and restarting the phone after completing setup. I followed the same but then i realised that RomManager was done as i did a reset and wiped the cache and done a reset. So had to download the RomManager apk on the sdcard and install to boot into recovery to install the Gapps. So i guess its better to install the Gapps soon after you have installed the rom in the recovery before restart.
Here are some of the screenshots of my p765..
Error during installation
When I choose install update from ext sd card and after that there is a error occur
The error is shown in picture...
Please help...
and when i use my stock rom unfortunately the process com.android.phone has stopped. is occurred.
Niket Saini said:
When I choose install update from ext sd card and after that there is a error occur
The error is shown in picture...
Please help...
and when i use my stock rom unfortunately the process com.android.phone has stopped. is occurred.
Click to expand...
Click to collapse
God saves you buddy, this problem occurs due to wrong recovery, recovery stops itself from installing rom, n saves you from bricking device,
install latest recovery, 6.0.4.8 or twrp latest release, below is the link
recommend twrp
http://forum.xda-developers.com/showthread.php?t=2733471
dont install 2nd int
by the way if u r flashing artas cm 11 build its not going to work, go for nameless by dhiru or mokee open by nx
cheers
shirodkar8 said:
Hi All,
First of all Thank you Droideking for the detailed guide for a noob like me. :good::good:
I have updated my L9 p765 Indian version with baseband version 20c (latest JB Update India) to CM11. I have used the ROM - UnOfficial CyanogenMod 11 [KANG] 11 by dhiru1602. The experience is awesome. The GUI is liquid smooth no lags unlike the stock ROM.:victory:
About the guide I would like to confirm that it worked absolutely fine for my Indian Version p765 with v20c baseband. There were no restarts encountered in fastboot mode. Only thing which happened was that when i was running adb command in the command prompt i got the error on command prompt saying adb is outdated please update. The error was gone when i ran the command prompt with run as admin option in windows. Also i used RomManager instead of GooManager as it was not available on playstore.
One more observation - Droideking, in the guide you have mentioned that install gapps after installing ROM and restarting the phone after completing setup. I followed the same but then i realised that RomManager was done as i did a reset and wiped the cache and done a reset. So had to download the RomManager apk on the sdcard and install to boot into recovery to install the Gapps. So i guess its better to install the
Gapps soon after you have installed the rom in the recovery before restart.
Here are some of the screenshots of my p765..
Click to expand...
Click to collapse
Glad to hear that dis tut help u to get in custom rom world, the major reason behind it was just rooting n unlocking bootloader safely, rest procedures can varies person to person as per experience
Droideking said:
God saves you buddy, this problem occurs due to wrong recovery, recovery stops itself from installing rom, n saves you from bricking device,
install latest recovery, 6.0.4.8 or twrp latest release, below is the link
recommend twrp
http://forum.xda-developers.com/showthread.php?t=2733471
dont install 2nd int
by the way if u r flashing artas cm 11 build its not going to work, go for nameless by dhiru or mokee open by nx
cheers
Click to expand...
Click to collapse
Thank you for your reply.
And i solve it that day it is due to cwm recovery and atras rom need twrp recovery.
now i am using [AOSP]ParanoidAndroid4.42-FINAL.
Is nameless and mokee is better than paranoidandroid rom?
please give me suggestion
Niket Saini said:
Thank you for your reply.
And i solve it that day it is due to cwm recovery and atras rom need twrp recovery.
now i am using [AOSP]ParanoidAndroid4.42-FINAL.
Is nameless and mokee is better than paranoidandroid rom?
please give me suggestion
Click to expand...
Click to collapse
nameless, much stable, n support, i almost tried every rom on this forum and end up at this, grt rom...
Hotspot
Droideking said:
nameless, much stable, n support, i almost tried every rom on this forum and end up at this, grt rom...
Click to expand...
Click to collapse
Hey i want to know in nameless rom's hotspot is working properly and is there any problem regarding wifi Bluetooth or other fuctions...
please give me suggestion..
because in panandroid rom hotspot is not working
yupp, it works flawlessly
Sent from my LG-P765 using XDA Premium 4 mobile app
Hiw to move an app to sd
Droideking said:
yupp, it works flawlessly
Sent from my LG-P765 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey, sorry to disturb u but i have an issue in nameless rom i know ur not a developer or senior member but i think u hv the solution of my problem.
My problem is I'm not able to move my apps from phone memory to sd card in nameless rom i used other apps to move but when i open the app and click on move it goes to apps info and there is no button to move to sd...
please help....
Hey guys,
Can you help me please? Can't find a way to unlock the bl for my frickin L9.
Device is already rooted.
P760 v20i-eur-xx
Thanks
Sent from my LG-P760 using XDA Free mobile app
This is what I did:
1. Unlocked the bootloader (requested permission and used Mi Unlock app)
2. Installed the latest TWRP (twrp-3.1.1-0-mido.img), via:
adb reboot bootloaderfastboot flash recovery3. Booted into TWRP (Vol+ and power)
4. Flashed SuperSU v2.78
5. Wiped Cache/Delvik/System/Internal
Then wanted to copy RR.....mido...zip and gaps...zip to the phone's Internal Memory - but couldn't as after pressing CTRL-V it would just sit there. So I tried using a different windows machine and a linux box, but the problem was still the same.
I then thought I'll try a micro-SD card which I inserted, but when I wanted to mount it, TWRP wouldn't let me - the check box remained unchecked.
At that point I ran out of options and rebooted it. But now it's stuck at Mi, mi.com. Pressing Vol- & Power gets me to Fastboot - but I don't know what to do next.
Could someone please tell me what I can do next. And also what I did wrong - so others can learn from my mistake.
Many thanks
Tomasz.
tjk123 said:
This is what I did:
1. Unlocked the bootloader (requested permission and used Mi Unlock app)
2. Installed the latest TWRP (twrp-3.1.1-0-mido.img), via:
adb reboot bootloaderfastboot flash recovery3. Booted into TWRP (Vol+ and power)
4. Flashed SuperSU v2.78
5. Wiped Cache/Delvik/System/Internal
Then wanted to copy RR.....mido...zip and gaps...zip to the phone's Internal Memory - but couldn't as after pressing CTRL-V it would just sit there. So I tried using a different windows machine and a linux box, but the problem was still the same.
I then thought I'll try a micro-SD card which I inserted, but when I wanted to mount it, TWRP wouldn't let me - the check box remained unchecked.
At that point I ran out of options and rebooted it. But now it's stuck at Mi, mi.com. Pressing Vol- & Power gets me to Fastboot - but I don't know what to do next.
Could someone please tell me what I can do next. And also what I did wrong - so others can learn from my mistake.
Many thanks
Tomasz.
Click to expand...
Click to collapse
Go to fastboot mode and Reflash twrp, next boot to twrp.
Once you're in twrp, wipe everything except internal storage /SD card then flash cm14.1 firmware, flash Rom & Gapps and reboot!
Links :-
*.cm14.1 firmware.zip
*.RR Rom
*.Gapps
And also, DL all those files and put em' all to your SD card, insert SD card then move on! Goodluck
Thanks
sachin n said:
Go to fastboot mode and Reflash twrp, next boot to twrp.
Once you're in twrp, wipe everything except internal storage /SD card then flash cm14.1 firmware, flash Rom & Gapps and reboot!
Click to expand...
Click to collapse
That did it. Now I do have a nice working phone.
Thanks for your help
tomasz.
tjk123 said:
That did it. Now I do have a nice working phone.
Thanks for your help
tomasz.
Click to expand...
Click to collapse
Np, always here to help xD
how to move towards fastboot by ADB?
I can move to twrp recovery by the command adb reboot recovery
worked for me also
This might help you after realizing that you want to install custom ROM again after upgrading to android 11 MIUI but you cannot install android 10 or 11 based ROM and stuck with either boot loop or android rescue party.
WARNING: This might wipe every writable partition. Charge your phone at least 20% or more to prevent from destroying these partitions.
Instructions:
1. Download firmware from here
2. Download full ROM (either recovery or fastboot) from here
3. Save the firmware zip file it in either internal storage or sdcard. Reboot to TWRP afterwards
4. Tap install and find the zip file in your storage and install. Wait for a couple of seconds to get done.
To install full ROM
Recovery
1. After installing firmware from recovery mode, don't reboot. If you reboot the system it will fail to boot. Boot to fastboot if you fail this step and flash a recovery image. Proceed with next step.
2. Install full ROM flashable zip from sdcard or internal storage.
3. Format /data. Reboot.
Using fastboot
1. Boot from fastboot mode
2. Extract full ROM fastboot zip file.
3. Open miflash and locate the fastboot folder.
4. Choose flash_all. Click start.
5. The phone reboots itself. Boot to recovery mode and wipe data.
All done. The phone is now downgraded from android 11 back to android 10.
Note: I got 2 anti triggered when attempting to downgrade the phone using recovery and fastboot without installing firmware zip file first. RIP me I guess I voided my warranty anyways so doesnt matter as I already applied some insurance for my device.
TL;DR: Installed Recovery will get erased as I mentioned in WARNING. Please don't skip every step.
Edit: since it made confusion, I split steps for recovery and fastboot mode.
Has anyone tried this procedure?
Im on 12.0.6.0(EU). Bootloader locked (wait 3days) so no TWRP. Want downgrade to 12.0.8.0(EU) and flash Pixelexperience ROM.
It will work?
I'm a bit confusing... Links inserted in first 2 points seem to be the same link. So what I've to download exactly?
I'm on 12.0.7.0 Android 10 but I'm curious to try 12.0.6.0 Android 11 stable beta released some days ago...
PYCON said:
I'm a bit confusing... Links inserted in first 2 points seem to be the same link. So what I've to download exactly?
I'm on 12.0.7.0 Android 10 but I'm curious to try 12.0.6.0 Android 11 stable beta released some days ago...
Click to expand...
Click to collapse
Its not the same. First one is cca. 80MB of size while full rom is 2.4GB for recovery and 4.4GB for fastboot.
I did this method yesterday and its working. No problems whatsoever.
The only thing i would add is you need both versions of rom - recovery and fastboot. Recovery when you flash for the first time in recovery and fastboot when you flash with Mi flash.
And my advice is, android 11 miui is really bad. Its not finished, it stutters a lot, u can't use third party launchers with gesture navigation (at least in my case, Nova lanucher), performance is bad.
Not worth any time.
Steelrock said:
Its not the same. First one is cca. 80MB of size while full rom is 2.4GB for recovery and 4.4GB for fastboot.
I did this method yesterday and its working. No problems whatsoever.
The only thing i would add is you need both versions of rom - recovery and fastboot. Recovery when you flash for the first time in recovery and fastboot when you flash with Mi flash.
And my advice is, android 11 miui is really bad. Its not finished, it stutters a lot, u can't use third party launchers with gesture navigation (at least in my case, Nova lanucher), performance is bad.
Not worth any time.
Click to expand...
Click to collapse
Ok, ok, good to know. I'm just curious... I'll remain with A10 till when A11 will be good enough to be used as a daily driver
Hi. Does this method requires unlocked bootloader? Thanks
hi. this method not working for me !
*phone is unlocked !
ar-rabbiar said:
hi. this method not working for me !
*phone is unlocked !
Click to expand...
Click to collapse
This error is normal because ur phone is unlocked....but the phone should reboot normal in the new ROM. It did not happen this way?
Alin45 said:
This error is normal because ur phone is unlocked....but the phone should reboot normal in the new ROM. It did not happen this way?
Click to expand...
Click to collapse
reboot with bootloop and again. and just miui 12 a11 or rom with selinux permissive working for flash.
The same in here. Bootloop, bootloop....
But if flash the a11 rom it works.
ar-rabbiar said:
hi. this method not working for me !
*phone is unlocked !
Click to expand...
Click to collapse
did you try to flash firmware file from twrp recovery first? also that error means that a checkpoint failed which you need to disable or remove in configuration settings.
tourofeio said:
The same in here. Bootloop, bootloop....
But if flash the a11 rom it works.
Click to expand...
Click to collapse
did you tried recovery or fastboot flashing? and did you installed firmware first before installing full rom?
endva3 said:
Has anyone tried this procedure?
Im on 12.0.6.0(EU). Bootloader locked (wait 3days) so no TWRP. Want downgrade to 12.0.8.0(EU) and flash Pixelexperience ROM.
It will work?
Click to expand...
Click to collapse
i only tried recovery method and it works fine after days of trying. 12.0.6 android 11 is still buggy and miui needs to fix it a lot. most of apps are not well optimized for this flavor.
Today unlocked bootloader. Flashing 12.0.8.0 (i have 12.0.6.0 A11).
Everything work perfect. No bootloop, bootloader relock and works fine
People are probaly skipping some steps.
1. Download Firmware small size files
2. Download full Firmware, both - fastboot and recovery (put it on SD card, small and recovery)
3. Install Twrp or Orangefox recovery (download it from somewhere)
4. Enter into recovery and install small firmware FIRST, dont reboot, install big firmware (recovery version) SECOND
5. do not reboot
6. format data
7. Now reboot into fastboot
8. Extract fastboot firmware zip into new folder on desktop
9. Start Mi flash, select that folder where u extracted files and tick "clean only" on the bottom of the Mi flash if u want to leave bootloader unlocked and from drop down menu near that pick "flash_all.bat".
Thats how i did it.
Steelrock said:
People are probaly skipping some steps.
1. Download Firmware small size files
2. Download full Firmware, both - fastboot and recovery (put it on SD card, small and recovery)
3. Install Twrp or Orangefox recovery (download it from somewhere)
4. Enter into recovery and install small firmware FIRST, dont reboot, install big firmware (recovery version) SECOND
5. do not reboot
6. format data
7. Now reboot into fastboot
8. Extract fastboot firmware zip into new folder on desktop
9. Start Mi flash, select that folder where u extracted files and tick "clean only" on the bottom of the Mi flash if u want to leave bootloader unlocked and from drop down menu near that pick "flash_all.bat".
Thats how i did it.
Click to expand...
Click to collapse
i did the same, but looking to partitions of system, product and vendor, i understand that flashing the files via recovery and fastboot they dont write in that partitions.
looks like the partitions are read only. thanks
I try to flash a custom rom like arrows os via recovery , the rom shows the boot logo of arrows rom, and then bootloop.
tourofeio said:
I try to flash a custom rom like arrows os via recovery , the rom shows the boot logo of arrows rom, and then bootloop.
Click to expand...
Click to collapse
Most probable, u forgot to do a Format data (yes) before reboot to system.
endva3 said:
Today unlocked bootloader. Flashing 12.0.8.0 (i have 12.0.6.0 A11).
Everything work perfect. No bootloop, bootloader relock and works fine
Click to expand...
Click to collapse
Did you flash it from the built-in recovery or with MiFlash? (My 167 hour waiting period ends tomorrow)
Solved people. change the version of the Mi Flash.