Can anyone help me? Pleaaaaase
I'am desperate to fix my tab :crying:
First time here, im a newbie :laugh:
I have a samsung tab 2 7" (p3100), 3g wifi, its os is if im not mistaken, 4.0.4
I have been searching online about how to root my tab and I bumped upon a certain thread.
I followed their instructions and flashed CWM to my tab via odin, and when my tab rebooted, it was on a bootloop.The Samsung Tab 2 7.0 will appear then the sound will play then it reboots again and again and again.....
I tried to access recovery mode by waiting for the right timing during the boot loop, the cwm was successfully installed, and when I tried to flash the zip, it was finished, then I rebooted the system but Im still having boot loops, please help me,
Should I go to some technicians in malls?
Im searching the net for almost 8 days for the solution :crying: :crying: thank you in advanced for the answers.. I somehow also cant find a 4.0.4 stock rom, people from other forums said that i just need to revert to the stock rom?
this android tab is a clone one which it says it is a samsung, but unfortunately, no pre-installed recovery and no odin are installed... and this is stuck in boot loop. pls help me with this one... i need to install a CWM Recovery using SD card flashing or if u know anything else that will work, pls tell me. i think this tab is not rooted due to the owner, which is a girl... girls, most of them, just use the tab without knowing these informations like rooting so its very hard for me. pls help me. ty in advance.
Hi, all,
I used the ODIN Root for my T-Mobile Galaxy S6 Edge (model 925). I did everything, downloaded the proper zips and exe's and all, and began to root. Everything was going fine, my ODIN exe told me everything was fine, and my phone boots up...
...and stays stuck on the "Samsung Galaxy S6 Edge: Powered by Android" splash screen.
I CAN'T EVEN TURN IT OFF!
Any help would be greatly appreciated
HOW TO SOLVE:
Even though the phone is on, Volume Down + Home + Power will still boot into Download Mode. So do that.
Use the Samsung Galaxy S6 (NOT edge! Yes, the 920 file) zip instead of the Edge zip. And don't use the included .exe - use the official, latest ODIN EXE.
I have the same issue !
So i need to flash the 920's root file ? It won't really brick my phone ?? Or It will boot my phone ?
Thanks !
tusing said:
Hi, all,
I used the ODIN Root for my T-Mobile Galaxy S6 Edge (model 925). I did everything, downloaded the proper zips and exe's and all, and began to root. Everything was going fine, my ODIN exe told me everything was fine, and my phone boots up...
...and stays stuck on the "Samsung Galaxy S6 Edge: Powered by Android" splash screen.
I CAN'T EVEN TURN IT OFF!
Any help would be greatly appreciated
HOW TO SOLVE:
Even though the phone is on, Volume Down + Home + Power will still boot into Download Mode. So do that.
Use the Samsung Galaxy S6 (NOT edge! Yes, the 920 file) zip instead of the Edge zip. And don't use the included .exe - use the official, latest ODIN EXE.
Click to expand...
Click to collapse
Hi,
I'm still getting it hanging on the Galaxy S6 screen no matter what i do?!
Seriously need help!
perryd84 said:
Hi,
I'm still getting it hanging on the Galaxy S6 screen no matter what i do?!
Seriously need help!
Click to expand...
Click to collapse
Even though the phone is on, Volume Down + Home + Power will still boot into Download Mode, do not release any button until you see the download mode.
moises1204 said:
Even though the phone is on, Volume Down + Home + Power will still boot into Download Mode, do not release any button until you see the download mode.
Click to expand...
Click to collapse
this did not work for me, all that does is flash the bootscreen and i am still stuck on the bootscreen with the galaxy s6 powered by android there .
Galaxy S6 Demo Unit Bricked sm-g920x
hi i need help unbricking my demo unit galaxy s6
help
Galaxy s6 925x bricked Need help
hey i have galaxy s6 925x bricked need help unbricking it
unbricked
onetechdontknoweverything said:
hey i have galaxy s6 925x bricked need help unbricking it
Click to expand...
Click to collapse
hello
look here : forum.xda-developers.com/galaxy-s6-edge/help/help-required-bricked-s6-edge-t3095329/page5
i explain how i unbricked mine
lnuy said:
this did not work for me, all that does is flash the bootscreen and i am still stuck on the bootscreen with the galaxy s6 powered by android there .
Click to expand...
Click to collapse
try before with power button and volume down. Than press the sequence to go into download mode in the while the dislay turn off before rebooing.
liam04 said:
hello
look here : forum.xda-developers.com/galaxy-s6-edge/help/help-required-bricked-s6-edge-t3095329/page5
i explain how i unbricked mine
Click to expand...
Click to collapse
Hi mate
Have you done this with live demo unit?!?
Whenever I try this on Smart Switch I face force close from my PC!!!
First I enter model G925X then S/N but after that force close...
Hateftotti said:
Hi mate
Have you done this with live demo unit?!?
Whenever I try this on Smart Switch I face force close from my PC!!!
First I enter model G925X then S/N but after that force close...
Click to expand...
Click to collapse
it's a pb with your computer, for me no fc on my pc, did you try to uninstall samrt switch, erase all samsung folder, reboot, disable anti virus, re install the app on your pc ( downloaded from samsung here : http://www.samsung.com/ca/support/smartswitch/ )
i'm using windows 7 64bit
hope it will help you
Unbricked & root success.
http://forum.xda-developers.com/gal...it-model-sm-g920x-t3096172/page3#post61471520
Tried 920I!!!!!
Guyz can anyone please help me out...... I have a samsung galaxy s6 edge : SM-G925I.....
I did root with the odin 3.10.6, also used the 920I zip but i cannot get it right
Shows the "GALAXY S6 EDGE" and doesnt go any further
Please help!!!!!!!!!!!!!!!!!!!
---------- Post added at 07:51 AM ---------- Previous post was at 07:47 AM ----------
tusing said:
Hi, all,
I used the ODIN Root for my T-Mobile Galaxy S6 Edge (model 925). I did everything, downloaded the proper zips and exe's and all, and began to root. Everything was going fine, my ODIN exe told me everything was fine, and my phone boots up...
...and stays stuck on the "Samsung Galaxy S6 Edge: Powered by Android" splash screen.
I CAN'T EVEN TURN IT OFF!
Any help would be greatly appreciated
HOW TO SOLVE:
Even though the phone is on, Volume Down + Home + Power will still boot into Download Mode. So do that.
Use the Samsung Galaxy S6 (NOT edge! Yes, the 920 file) zip instead of the Edge zip. And don't use the included .exe - use the official, latest ODIN EXE.
Click to expand...
Click to collapse
still doesnt work on my edge 925I.................... what should i do
tusing said:
Hi, all,
I used the ODIN Root for my international Galaxy S6 Edge (modelsm-g 925i). I did everything, downloaded the proper zips and exe's and all, and began to root. Everything was going fine, my ODIN exe told me everything was fine, and my phone boots up...
...and stays stuck on the "Samsung Galaxy S6 Edge: Powered by Android" splash screen.
Click to expand...
Click to collapse
yaboib said:
tusing said:
Hi, all,
I used the ODIN Root for my international Galaxy S6 Edge (modelsm-g 925i). I did everything, downloaded the proper zips and exe's and all, and began to root. Everything was going fine, my ODIN exe told me everything was fine, and my phone boots up...
...and stays stuck on the "Samsung Galaxy S6 Edge: Powered by Android" splash screen.
Click to expand...
Click to collapse
Refer to this thread for a solution mate.
http://forum.xda-developers.com/gal...nual-update-stuck-g925f-t3173112#post62207108
Click to expand...
Click to collapse
How to solve
Use another root file,Use diffirent model for example:SM-G920F instead of SM-G920I or other model <-- these are international versions
Please help tmobile s6 edge soft brick
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.
Hello ,
if phone stuck on logo it means you played with EFS .
If phone Stuck on Logo After Flash Stock it Means Phone has Bad Root Key it know as DRK (DEV Root Key)
It Takes very long to find me perfect solution.
You will need to root phone. ( to turn on )
You will need an UART Interface and Uart Cable.
Than You need to Authenticate MSL
After that Write the Cert With DRK Data.
Now Phone is Good .
Flash with Stock Rom.
Enjoy Your Phone Working Fine.
tusing said:
HOW TO SOLVE:
Even though the phone is on, Volume Down + Home + Power will still boot into Download Mode. So do that.
Use the Samsung Galaxy S6 (NOT edge! Yes, the 920 file) zip instead of the Edge zip. And don't use the included .exe - use the official, latest ODIN EXE.
Click to expand...
Click to collapse
Hi, can someone please elaborate on this?
I have the exact same issue with the T-Mobile Galaxy S6 Edge SM-G925T
I've tried flashing G920FXXU2BOFJ with Odin but it just fails
I also flashed G925TUVS3DOJC perfectly with Odin but it's still stuck at the GS6 Splash Screen
Samsung Smart Switch does not work.
Can someone please send me the exact link to the file they used to fix this. Thank you
parter28 said:
Hi, can someone please elaborate on this?
I have the exact same issue with the T-Mobile Galaxy S6 Edge SM-G925T
I've tried flashing G920FXXU2BOFJ with Odin but it just fails
I also flashed G925TUVS3DOJC perfectly with Odin but it's still stuck at the GS6 Splash Screen
Samsung Smart Switch does not work.
Can someone please send me the exact link to the file they used to fix this. Thank you
Click to expand...
Click to collapse
boot into the recovery mode and wipe data/factory reset and cache and reboot system. it will boot properly.
hi guys. need ur help. i accidentally format the os in my galaxy note 3 . now it is not booting up. i tried to get into recovery mode also but it did not work . i dont know what to do now. really need ur help here. it only show the galaxy note 3 on startup and then the screen goes blank. kindly help me
Singhnote3 said:
hi guys. need ur help. i accidentally format the os in my galaxy note 3 . now it is not booting up. i tried to get into recovery mode also but it did not work . i dont know what to do now. really need ur help here. it only show the galaxy note 3 on startup and then the screen goes blank. kindly help me
Click to expand...
Click to collapse
flash stock rom