Hello, i'm new here and barely understand about phone rooting. So here is my problem. I try to root my GS+ in recovery mode, but when chose "apply update from sd card" and after that selecting ROM zip file recovery mode says: Install /sdcard; Installation aborted and it happens with all ROMS. By the way im using default recovery mode (not ROM manager of something). So do you have any ideas how can i fix this problem? My firmware version is 2.3.6. :crying:
Are you want to root or flash a new ROM ? Try this way for rooting : Easyroot :good:
Greetings,
dear all,
in the process of updating to jelly been from the ginger bread os i installed the cwm 5.x.x version and rooted after that i took complete backup then i have installed the jellybeen with doomnex rom or somthing once it is installed after restarting the deivce it started recovery loop and was getting the error e:drive/cache can't mount so then i tried to restore then also same message i tried and found latest cwm ver 6.x.x untouch installed over it thats it it is completely in unworakble condition options ar showing but no option can be selected just moving ther cursor up and down i cant enter any option neither booting
so kindly help me how can i fix this problem to restore to working state
waiting for your kind favour
thanks
If you are in Recovery - Loop, I think you have to flash a new Bootloader. Instructions and Files
Hi Users,
I installed the custom rom ******JELLY BLAST successfully on my Samsung Galaxy Ace GT-S5830i but after few days I noticed some performance issues. For this, I tried re-installing another custom rom on my phone but as I used the recovery manager during boot to load the custom rom from SD card, none of the custom roms are getting installed.
Now my phone is *only* booting in the recovery mode but it is not installing any rom which I select through SD card. (Looks like some permission issues to the /system folder in android.
If someone can please suggest me any recovery steps, it would be great. I dont want my phone to be sitting with the service center folks for no reason but I want to recover it on my own.
Is there any way I can use any custom rom or a *.exe which I can use to install it from SD card which will overcome the permission issue and then install the custom rom without any issue. Note: The phone is only booting to the default Andoid Recovery mode but not to the ClockWorkMOD recovery.
Thanks in advance!
Taz~
are you able to flash cwm through default recovery in order to get to apply new rom through cwm?
Sent from my GT-S5830i using xda app-developers app
Hello,
I have a problem with my Lenovo. After updating my Lenovo K910 died - it wont boot. Shows Lenovo Logo and hang.
Reseting to factory default doesn't take effect.
I want to install new firmware, but it dont have SD slot, fastboot doesn't see device.
Any ideas for help?
Thanks a lot!
Regards,
Dice.
dice_man said:
Hello,
I have a problem with my Lenovo. After updating my Lenovo K910 died - it wont boot. Shows Lenovo Logo and hang.
Reseting to factory default doesn't take effect.
I want to install new firmware, but it dont have SD slot, fastboot doesn't see device.
Any ideas for help?
Thanks a lot!
Regards,
Dice.
Click to expand...
Click to collapse
Did you find any solution my friend? I have the same problem. I tried to install the latest 4.4.2 ROM and now i'm stuck in Lenovo logo...
Hello,
After many attempts Lenovo start fastboot mode...
You must hold power and volume down and get blue screen with restore options - then I succes fastboot.
Hold thums for you.
TomTomarin said:
Did you find any solution my friend? I have the same problem. I tried to install the latest 4.4.2 ROM and now i'm stuck in Lenovo logo...
Click to expand...
Click to collapse
Did you download it correctly? If you have finished download it open the file to check the file corrupted or not. Then you can flash it.
Sent from my Lenovo K910 using xda app-developers app
Problem with ROM 1423
Hi all,
I downloaded Vibe UI 1.5 1423, specifically the new chinese ROM called "CSROM--V1.7". Followed the qsb downgrade method and it worked like a charm but I realized that it had root but not google apps.
A while later, I decided to flash it again with gapps, in particular pa_gapps-modular-mini-4.4.2-20140421-signed ones. And surprisingly, when my K910 booted the SettingsWizard apk was continuosly FC'ing (I meant force closing, but you know it is very annoying...).
I want somebody who has any idea of frameworks and developing to comment if there is a solution for that ROM to be installed.
I am not able to post in the development zone, as I havent yet got privileges. Hope somebody could help... that ROM is the best I've ever seen for this device.
Anyone?
Enviado desde mi Lenovo K910 mediante Tapatalk
Problems to flash 4.4.2 ROM
Hi there!!!
Could anyone help me to flash the ROM 4.4.2 on my lenovo vibe Z please (dual sim, no LTE, no external sd card enabled, current ROM : VIBEROM_V1.0_1407_2_ST_K910; android version 4.2.2)
I have tried many times the following two flashing methods, obtaining every time the same errors.
1- When I tried to flash the ROM 4.4.2 from the website needrom.com (LENOVO K910 VibeUI - 1421) through CWM recovery method (placing the rom on the root of the internal sd card of the phone) selecting installing from .zip in the recovery menu, the installation starts but it fails seconds after; then the screen shows:
Installing update
This package is for "kiton" devices: this is K910
E: Error in /temp/update.zip
(status 7)
Installation aborted
Its worth it to tell you that I tried to flash the rom by means of the sideloader there were no problems loading the rom.zip to the phone, when it started to install it, the process was aborted , presenting the same error presented above.
2- I also tried to perform a SD update to flash a former rom version... I do not really remember which one (it has a 226 on its name... a file with extension qsb) the error I got is as follows
SD Update
Dev: Internal Sdcard
Error: File size error
I would be very grateful if someone could help me to flash the rom ... give me some explanations on how to do it ... what other options I have got to do the flashing... etc
Thanks in advance
R
k910 wont boot
I think I may have bricked my phone. After trying to install 4.4.2 my phone won't boot. It just shows the Lenovo logo. Holding volume down and power button doesn't work either. When I connect my phone to a computer via USB I can use fastboot commands. When I try to boot into recovery using "fastboot boot recovery.img" it says FAILED (remote: Locked). Anyone have any idea what I could do?
ricschulz said:
Hi there!!!
Could anyone help me to flash the ROM 4.4.2 on my lenovo vibe Z please (dual sim, no LTE, no external sd card enabled, current ROM : VIBEROM_V1.0_1407_2_ST_K910; android version 4.2.2)
I have tried many times the following two flashing methods, obtaining every time the same errors.
1- When I tried to flash the ROM 4.4.2 from the website needrom.com (LENOVO K910 VibeUI - 1421) through CWM recovery method (placing the rom on the root of the internal sd card of the phone) selecting installing from .zip in the recovery menu, the installation starts but it fails seconds after; then the screen shows:
Installing update
This package is for "kiton" devices: this is K910
E: Error in /temp/update.zip
(status 7)
Installation aborted
Its worth it to tell you that I tried to flash the rom by means of the sideloader there were no problems loading the rom.zip to the phone, when it started to install it, the process was aborted , presenting the same error presented above.
2- I also tried to perform a SD update to flash a former rom version... I do not really remember which one (it has a 226 on its name... a file with extension qsb) the error I got is as follows
SD Update
Dev: Internal Sdcard
Error: File size error
I would be very grateful if someone could help me to flash the rom ... give me some explanations on how to do it ... what other options I have got to do the flashing... etc
Thanks in advance
R
Click to expand...
Click to collapse
did you find solution for that
"This package is for "kiton" devices"
i coudlnt update to kitkat also, with this error.
ricschulz said:
Could anyone help me to flash the ROM 4.4.2 on my lenovo vibe Z please
Click to expand...
Click to collapse
You probably have to flash the original 4.2.2. first, then follow the instructions on baralajbi's page.
Android 4.4.2
$275.99
wuna.ru
Keyboard
I just installed 4.4.2 (1503) and now there is no swipe function on the keyboard? Do anyone know what happened to it? Can't seem to find it in the settings either
Ugglaimossen said:
I just installed 4.4.2 (1503) and now there is no swipe function on the keyboard? Do anyone know what happened to it? Can't seem to find it in the settings either
Click to expand...
Click to collapse
ok I found it. Had to install Google keyboard and local keyboard layout. Now it works! *happy man* ☺
Sent from my Lenovo K910 using Tapatalk
Hi guys
Last night i tried to upgrade my ATT Lg Opt. G from 4.0 ICS to CM12( lollipop)
got the nightly CM rom from their official page but trying to install the recovery option from rom manager app got the phone stuck at LG logo with a error ( secure booting error) and got it solved by changing the teenybin as stablished on this guide http://forum.xda-developers.com/showthread.php?t=2230106
now im able to access recovery mode but when i try to install the .zip
it says error unable to open .zip
i tried wipe cache/data and all that stuff
PS: im trying to install rom from ext. SD card and also tried from internal phone sd card
any help :crying::crying::crying::crying::crying: