[Q] Can't install any ROM besides Hatka - HTC Droid DNA

Ok so I've been struggling with this for MONTHS. I flashed Hatka 2.x (Android 4.2) a while back, and ever since then I have not been able to install any other rom besides Hatka 2.x.:crying:
Android: 4.2
Rom: Hatka 2.x
Kernel: 3.4.10-g4d47dce [email protected] #1 SMP PREEMPT
HTC Sense: 4+
I have tried flashing several roms from just about anything 4.2.2 - 4.3 and now 4.4.x. I'm not sure If maybe I need a new kernel, boot image or what but I feel like I have tried everything. When I flash a rom I wipe data/cache/dalvik cache (of course), Flash the rom, flash gApps, flash cache/dalvik and more times than not my phone will never get past the HTC logo. Sometimes more lately with 4.4 roms my phone will boot loop only showing the HTC logo for a minute or two then restart. I root and flash several different types of phones for my friends all the time, and never have any of these issues that I've faced with my own phone.
I recently thought about trying to un-root, re-lock, and flash back to stock, then re-root and un-lock again but I'm not sure if that will even help.
Things I've tried:
Several roms
Moded kernel
Stock kernel
Multiple CWM versions
Multiple TWRP versions
Fastboot flash
Adb flash
Adb Sideload
Roms I am currently trying to flash:
AOKP unofficial (4.4.2)
BeanStalk (4.4.2)
CM-11 Nightly (4.4.2)
OSE Official (4.4.2)
My secondary HDD with all of the kernels, roms, and anything else I have tried recently failed so I don't have the specific version numbers for any of the attempts listed above.
If someone could give me any advice on this I would be eternally greatful. The Android/xda community has always been so helpful with many others in times of need, so now after spending months of research and trial & error I am reaching out to anyone here at xda that may be able to give me some advice/assistance.
Links to other threads/tools are greatly appreciated also! :good:
Thank you in advance.
-EDIT-
SOLVED
I took thay10's advice and flashed RUU. Since I got an error flashing RUU 3.04 I found RUU 1.15 here and flashed that successfully.
After that I verified my cid using this method.
When that turned out ok I continued to the HTCDev page to unlock my bootloader.
Once the bootloader was unlocked I used Facepalm S-Off method to achieve S-Off. (Using only the modified boot.img and DNA-rescue.img [links in thread]).
After all that was finished and I now had my bootloader unlocked and S-Off, I chose the recovery of my choice and flashed it using fastboot.
FINALLY, I was able to load the recovery and wipe everything (system,data,cache,sdcard) and flash a 4.4.2 rom of my choice!
Everything works perfectly now, I'm so relieved! Thank you again thay10 for your help. Hopefully this can help someone else out as well.

anyone?

Okay first thing. Looks like your doing a dirty flash and going from rom to rom may cause problems and clutter.
What I would advise is you to do a clean flash which involves you wiping. cache,data,system,sdcard.
But ONLY do this after you backup files you need, and make sure you have fastboot and adb installed and is working properly on your computer.
Edit: Are you still soff and bootloader unlocked?

thayl0 said:
Okay first thing. Looks like your doing a dirty flash and going from rom to rom may cause problems and clutter.
What I would advise is you to do a clean flash which involves you wiping. cache,data,system,sdcard.
But ONLY do this after you backup files you need, and make sure you have fastboot and adb installed and is working properly on your computer.
Edit: Are you still soff and bootloader unlocked?
Click to expand...
Click to collapse
Thank you for the advice. Yes I am S-off and my bootloader is unlocked. I noticed that the version of cwm I had installed was not wiping the system folder so I flashed 'Philz Touch 6' cwm and used that to do a full wipe including system,data,cache,sdcard and then used adb sideload to flash a couple roms. Each rom I flashed after a full wipe still won't boot. I continue to loop through the htc logo.
ADB and fastboot are both working properly, and htc drivers are fully up to date.
Roms I am currently trying to flash are:
AOKP unofficial (4.4.2)
BeanStalk (4.4.2)
CM-11 Nightly (4.4.2)
OSE Official (4.4.2)

stevenschemers said:
Thank you for the advice. Yes I am S-off and my bootloader is unlocked. I noticed that the version of cwm I had installed was not wiping the system folder so I flashed 'Philz Touch 6' cwm and used that to do a full wipe including system,data,cache,sdcard and then used adb sideload to flash a couple roms. Each rom I flashed after a full wipe still won't boot. I continue to loop through the htc logo.
ADB and fastboot are both working properly, and htc drivers are fully up to date.
Click to expand...
Click to collapse
I've never used CWM so I'll half to pass it on to someone else to help you.
Maybe you can try and flash a 3.04 RUU and or try flash TWRP which I know works because I use it everyday,

thayl0 said:
I've never used CWM so I'll half to pass it on to someone else to help you.
Maybe you can try and flash a 3.04 RUU and or try flash TWRP which I know works because I use it everyday,
Click to expand...
Click to collapse
No problem. I was using TWRP for the longest time but I read a few different places that people were having issues flashing cm-11 on some versions of TWRP and to explorer versions of CWM that worked.
I have RUU downloaded but I have not ran it yet. What exactly will RUU do?
-EDIT- Also when would I run RUU? Would I have to restore my nandroid backup first or can it read my phone while in recovery through adb?
-EDIT- I went ahead and flashed RUU 3.04 while in the bootloader. It says it's sending to my phone right now so I will update shortly with a result.

thayl0 said:
I've never used CWM so I'll half to pass it on to someone else to help you.
Maybe you can try and flash a 3.04 RUU and or try flash TWRP which I know works because I use it everyday,
Click to expand...
Click to collapse
I flashed the latest TWRP and when I sideload the rom I get the error saying "Error executing updater binary in zip '/data/'
This is the issue I was reading about when people were saying they couldn't flash cm-11 with TWRP. I've even tried installing cm-10.2 roms and had the same issue.

thayl0 said:
I've never used CWM so I'll half to pass it on to someone else to help you.
Maybe you can try and flash a 3.04 RUU and or try flash TWRP which I know works because I use it everyday,
Click to expand...
Click to collapse
The RUU 3.04 flash finished and I got "ERROR 158; Image error. The rom update utility cannot update your android phone. Please get the correct rom update utility and try again."
Any idea what would cause that?
RUU was downloaded from HERE.

stevenschemers said:
No problem. I was using TWRP for the longest time but I read a few different places that people were having issues flashing cm-11 on some versions of TWRP and to explorer versions of CWM that worked.
I have RUU downloaded but I have not ran it yet. What exactly will RUU do?
-EDIT- Also when would I run RUU? Would I have to restore my nandroid backup first or can it read my phone while in recovery through adb?
-EDIT- I went ahead and flashed RUU 3.04 while in the bootloader. It says it's sending to my phone right now so I will update shortly with a result.
Click to expand...
Click to collapse
TWRP last time I checked didn't support CM thats why people switched to CWM
What are you trying to do to your phone? Most people only run RUU to get to stock.
---------- Post added at 02:42 AM ---------- Previous post was at 02:40 AM ----------
stevenschemers said:
The RUU 3.04 flash finished and I got "ERROR 158; Image error. The rom update utility cannot update your android phone. Please get the correct rom update utility and try again."
Any idea what would cause that?
RUU was downloaded from HERE.
Click to expand...
Click to collapse
I'm guessing you ran the exe. I was refering to the one thats a zip file and you flash it

Related

adb device not found and no rom to load

So heres the deal, i tried to flash miui and it doesnt work at all, i am the dummy who didnt do a nandroid back up, and now im stuck, evo 3d hboot 1.5, twrp 2.0,try to push adb, but its says device not found. i can boot into hboot and twrp but i cant get a rom to load so.. someone please help
hmm
ok so i figured out if i load into twrp and then do adb commands they work. installed new rom but it gets stuck at boot animation, any help would be great.
baloocifer said:
ok so i figured out if i load into twrp and then do adb commands they work. installed new rom but it gets stuck at boot animation, any help would be great.
Click to expand...
Click to collapse
Did you wiped everything before the flash ?
Sent From My RED 3Dimension
yeah i did wipe everything, and i did get roms to load, but everyrom that i try now gets to the actual rom and keeps giving me errors, like htc.bg process force close
did you follow the instructions on how to flash miui to a phone with hboot 1.5 or did you just do it blindly thinking it will work? if you didnt follow the instructions your kernel did not flash
plus you can always mount your sd-card in recovery to transfer a different ROM, zip, ect.......
I have tried a lot of different things. i have loaded into twrp pushed roms then fastboot load recovery then installing with twrp and i seem to get the same results with every different rom.
baloocifer said:
I have tried a lot of different things. i have loaded into twrp pushed roms then fastboot load recovery then installing with twrp and i seem to get the same results with every different rom.
Click to expand...
Click to collapse
What radios are you on software? You should stick with a rom that is built off the latest updates. I have been waiting on a rom to drop built off the latest software update. Are you on the latest software? If you try running old roms built off 2.3.3 and your kernel and radios are the latest you will have issues no matter what you do.
i think i may have been trying flash it all wrong i dont really know what i did right this time but i got it loaded so making a nandroid back up right now thanks for all your guys help

Stuck, need help

I rooted my rezound and flashed a rom with no problems. Today I tried flashing a different rom and I have been unable to start my phone since. I can get into recovery, wipe, flash etc.. but nothing I've tried has gotten my phone to boot. I've tried Awesome Recovery Tool-> Touchscreen based PH98IMG Creator for MainVer which isn't helping and I don't know what else to do. The last message I saw in hboot was something about the main version is older. Can someone please help me get my phone to boot please
This worked well for me:
http://forum.xda-developers.com/showthread.php?t=1467099
k9tim said:
This worked well for me:
http://forum.xda-developers.com/showthread.php?t=1467099
Click to expand...
Click to collapse
Thanks but that wouldn't work via recovery but I did manage to get my problem fixed!! I managed to "fastboot flash boot boot.img" then boot into recovery and flash the rom and thank god it worked!!
sungal said:
I rooted my rezound and flashed a rom with no problems. Today I tried flashing a different rom and I have been unable to start my phone since. I can get into recovery, wipe, flash etc.. but nothing I've tried has gotten my phone to boot. I've tried Awesome Recovery Tool-> Touchscreen based PH98IMG Creator for MainVer which isn't helping and I don't know what else to do. The last message I saw in hboot was something about the main version is older. Can someone please help me get my phone to boot please
Click to expand...
Click to collapse
the problem u were having has to do with kernels.
when u first tried flashing a different rom, were u going to ics from gb or gb from ics?
gb roms and ics roms have different kernel.
"fastboot flash boot boot.img" then boot into recovery
and flash the rom was the right call.
just wanted to let u know this.

MAJOR ISSUE evo 4g lte will not boot even though was restored from backup

im having major issues here with my device it all started with me trying to flash it to cynogenmod 10 which apparantly my device has the s-on so i was stuck in the cmod boot logo, luckily i backed up my device prior to that with the stock rom and everything so i restored successfully back to my stock rom. then i was reading along some forums to see what the problem was and i came accrosss this forum "http://androidforums.com/evo-4g-lte-all-things-root/606748-how-install-kernels-s-h-boot-1-15-a.html" which gave me a few options on how to flash kernels with the right one that will work with cynogen mod, i chose option 1 because it said it is recommended which the steps were to take the rom "boot.img" file and copy it over to the android sdk platform tools folder and open up a cmd and i flashed the rom "boot.img" which according to the forum that contains the kernel that belongs with that rom i did what it ask went to fastboot mode and typed in fastboot boot boot.img, which succeeded, when i rebooted the device it boots up acting like it is trying to open up recovery mode which is twrp recovery, after that it does nothing it blacks out and a little white bar flashes on top of the screen from time to time then it turns off and reboots and do same cyckle, i attempted to go back to twrp and restore my stock rom which said it succeeded but when i rebooted it did the same thing acted like it was tryning to boot up to recovery being inforemd with those red letter about developmental purposes only stuff, so i factory rested my device wiped dalvik cache and cache and even wiped the system rom and restored my back up with stock rom and nothing works still, please help i am stuck please!!
You probably need to pull the boot.img from a stock ROM and send it via fastboot since your trying to go back to your stock backup.
thanks, but now i got the cynogen mod 10 to boot up now for some reason the touch screen does not respond to the touch neither does the capacative touch buttons work either do you have any idea what it could be?
If you have the 3.16 OTA update then you're touchscreen firmware is incompatible. If this is the case your stuck with 3.16 based roms. Cm will not work for you.
Sent from my EVO using Tapatalk 2
well the 3.16 ota update is that the latest one?
Yes. If you have the 3.16 update the only way your going to get cm to work is to s-off and downgrade you're tp firmware.
Sent from my EVO using Tapatalk 2
do you know were i can find these recourses on how to do this? i know that it has something to do with dirtyracun or something like that but i didnt really didnt understand their website on how to s-off and how to i downgrade my tp firmware
droidman89 said:
do you know were i can find these recourses on how to do this? i know that it has something to do with dirtyracun or something like that but i didnt really didnt understand their website on how to s-off and how to i downgrade my tp firmware
Click to expand...
Click to collapse
I'll try..
First and foremost you need to go here http://themikmik.com/showthread.php?13192-RADIOS-RECOVERY-FLASHABLE-Jewel-Radio-Collection&p=220556&viewfull=1#post220556 and download the boot.img only for whatever version of the stock rom your backup is.
Put it in your sdk tools and open a command prompt and fastboot flash boot boot.img
Go to twrp recovery and WIPE cache, dalvik, factory reset, and system.
Restore your stock backup.
Reboot.
If you can get back to your stock rom, then you should read up on dirty racun or possibly facepalm to gain s-off if you want to run cm.

[Q] HTC Desire X - need Support

Hello ,
since two days i am trying to install a custom rom on my htc desire x. I repeated every single step several times to make sure everything still is fine.
(unlook, flash boot, flash recovery / tried twmp and cwm, etc..)
The only rom which works for me ist the cM10-2-20138004-unofficial. But with restrictions. WLAN doesn't work, media manager isn't starting. Cant hear the partner when calls are incoming.
I tried mySense, Half_Sense, myOnedx, but after finishing installation the device hangs on startup. I waited hours and minutes but nothing happened.
I tried several RUU´s but can't find the right ones for me, or i got the 155 error message.
There is no OS installed on the device. How can i get the device up an running? I would be really happy if somebody can give me a hint whats going wrong.
Thx in advance
Dont worry all ****s can be fixed.Wha is ur hboot ? Or simply before to try to install custom rom U was with ICS rom or JB ?.You have to use the right recovery.Look what rom you want to flash, if you on ics hboot u cant just flash jb room (Some roms already have this funcion)
Ps:
After flasing the rom go in boothloader and flash boot.img And away do full wipe
What you need to make sure when installing a ROM: Install a suitable kernel. When installing a Sense ROM, install a Sense custom kernel or the stock kernel. Installing CM isn't advisable, because it's not ready for daily use yet. Also, make sure you use the right recovery for right hboot.
Good Morning,
thx for reply. I want to install the myOnedx_RC4.0 FX. I extracted the boot.img from zip. Installed the rom, wiped, reboot and installed the boot.img.
But that failed. Again, the cyanogen start up occurs for hours and hours. The device doesnt start.
Also tried the same wir the mySENSEdx5_RC4
I evem tried to install the nexuskernelv3.img
I am on hboot 1.25.002
Anyone an idea what wrong with my installation?
Thx
Again: Which custom recovery are you using? Please post a link to the thread here, so we can see what you've installed. Also, as first time user, you should check this and this.
Sorry i forgot. I am using TWRP 2.6.3.0 as custom recovery
Ok, strange, as this one works for me without problems. However, try the 2.5.0.0 version for JB and see if it goes without problems then. Also be sure to wipe system, dalvik cache, cache and data partition before installing a new ROM.
Same with version 2.5.0.0. I tried clockworkmod recovery, but as soon as i try to wip i got the error messages:
cant mount cache/recovery
cant open cache/revocery
So how can i get back to a stock rom? I tried the way described in here: http://forum.xda-developers.com/showthread.php?p=41327224
, but restore failed.
Any other ideas?
If you want to get back to stock, you need to know your CID first. After that, check this thread: http://forum.xda-developers.com/showthread.php?t=2324815
As you have JB hboot, you need to restore a JB backup. In the thread I linked you to are backups of several CIDs. If yours isn't there, you won't be able to return to stock.
Ok thanks. So it is not in there. I got the cid VODAP102.
Does that mean my device is gone? Or can i even try other workarounds?
Thanks
So i installed odexed rom and this one works fine. Do not know why all the other roms not working to me.
Maybe anyone an idea.
Otherwise thanks for your support.
Lastmenstanding said:
Does that mean my device is gone? Or can i even try other workarounds?
Thanks
Click to expand...
Click to collapse
Your hboot : 1.25.0002
Recovery to flash - JB recovery download from here : http://d-h.st/VjM
fastboot flash recovery command : fastboot flash recovery recovery.img
For a test ROM to flash, flash this stock ROM : http://forum.xda-developers.com/showthread.php?t=2239511
also make sure to fastboot flash boot boot.img
(boot.img is attached on OP)
Once everything run, it is up to you to try any other ROM and any other boot.img
Lastmenstanding said:
So i installed odexed rom and this one works fine. Do not know why all the other roms not working to me.
Maybe anyone an idea.
Otherwise thanks for your support.
Click to expand...
Click to collapse
It's either you flash ROM with wrong recovery type or wrong boot.img type or ROM which is not supported on your hboot.
Simple rules:
1) Recovery must be a recovery for JB.
2) Correct boot.img for correct ROM
ICS ROM that support hboot 1.25.0002
Recovery : JB recovery is a must
Boot.img : ICS boot.img is a must
JB ROM which should run fine on hboot 1.25.0002
Recovery : JB recovery is a must
Boot.img : JB boot.img is a must
ICS ROM that does not support hboot 1.25.002 - you need to manually change the mountpoint in updater-script, then
Recovery : JB recovery is a must
Boot.img : ICS boot.img is a must
Yeah, that was the problem, I see now... Have been blind a bit... The ROMs OP has installed on his phone are all ICS ROMs which need changing of updater-script mountpoints. That's why they won't work. @Lastmenstanding: Try any JB ROM available in Android Development section, should work without problems. The ROMs you tried were ICS ROMs especially written for ICS hboot, that's why they didn't work on your phone.
dansou901 said:
Yeah, that was the problem, I see now... Have been blind a bit... The ROMs OP has installed on his phone are all ICS ROMs which need changing of updater-script mountpoints. That's why they won't work. @Lastmenstanding: Try any JB ROM available in Android Development section, should work without problems. The ROMs you tried were ICS ROMs especially written for ICS hboot, that's why they didn't work on your phone.
Click to expand...
Click to collapse
OP mentioned about installing my ICS ROMs. Both ICS ROMs work on JB hboot without a need to edit the updater-script. My guess is he either use wrong recovery (ICS recovery is wrong) or wrong boot.img (JB boot.img is wrong) as it should be JB Recovery and ICS boot.img
..do not know how to use the thank meter, but..
Thank you guys for your excellent support.
Lastmenstanding said:
..do not know how to use the thank meter, but..
Thank you guys for your excellent support.
Click to expand...
Click to collapse
Just thank them at the bottom of their posts...
There is a thanks button at the bottom of every post.

[Q] in need of help

hey everyone.i have a att m8.s-off unlocked rooted.i was running twrp 2.8.01 i think.dirty unicorns for the rom.i was getting ready to flash viper.so i went to recovery to flash just started wiping stuff did the fist wipe cant remember the name of what it was.it wasnt something i wasnt suppost to just one of the normal wipes it did it then the phone rebooted.i think because i started the wioe process the rom wouldnt boot.so i tried to go back and finish everthing.about 30 seconds into recovery the phone tries to reboot.i tried flashin g recovery though fastboot it said it worked but recovery is unusable any help is appreciated.thanks.
Did you try to flash recovery again?
If it dosent work try flashing the RUU and then flash the viperone rom
Ya I flashed recovery it took but recovery just keeps rebooting phone.which ruu should I try.im a little confused with those.thanks for the help.
jhzzer said:
Ya I flashed recovery it took but recovery just keeps rebooting phone.which ruu should I try.im a little confused with those.thanks for the help.
Click to expand...
Click to collapse
4.4.3 is the RUU you'd want to use. Not causing the problem, but are you trying to use 3.2.1 or 2.5.0 viper?
Viper 3.2.1 is there a problem with that version.the problem was my sd card when I pluggedit into computer to load up firmware the computer ask me to format it.when I plugged it back into phone I went to recovery and it worked.thanks for all your help.
jhzzer said:
Viper 3.2.1 is there a problem with that version.the problem was my sd card when I pluggedit into computer to load up firmware the computer ask me to format it.when I plugged it back into phone I went to recovery and it worked.thanks for all your help.
Click to expand...
Click to collapse
You can only run 3.2.1 if you're on build 3.28.401.9 which hasn't been released for AT&T yet. Latest AT&T build is 2.23.502.3 which can only be used with Viper 2.5.0. Flashing Viper 3.2.1 while not on the correct build will cause your WiFi to stop working and probably a few other bugs. You can either flash Viper 2.5.0 or you can flash the 3.28.401.9 International build and run 3.2.1 and Viper will update you to 4.4.4. So you can use the RUU to get back to 4.4.3 (build 2.23.502.3) and run Viper 2.5.0 and wait for the officials AT&T update for 4.4.4 (build 3.28.401.9) or you can flash the International build (3.28.401.9) and run Viper 3.2.1. If you decided to update and want to flash International here is a guide to do it http://venomroms.com/viperonem8_3-0-0-requirements/
I wasn't aware 3.28.401.9 was international that's the one I flashed when it came out.but for whatever reason my sd card was causing recovery not to work right.I'm running viper 3.2.1 now.everything seems to be working good.I only changed Roms because du isn't supporting lollipop when it comes out so I'm trying different ones.
fastboot erase cache and install recovery with fastboot again.
Than restore nandroid. Didn't make one, why the heck not?
If that is the case, flash a known good ROM. adb push the ROM to the phone, or put it on SD with a USB card reader connected to your computer.
The above steps will get you out of a no boot situation from bad recovery or bad flash 99% of the time.
---------- Post added at 11:52 AM ---------- Previous post was at 11:48 AM ----------
jhzzer said:
so i went to recovery to flash just started wiping stuff did the fist wipe cant remember the name of what it was.it wasnt something i wasnt suppost to just one of the normal wipes
Click to expand...
Click to collapse
There is only one default wipe in TWRP (data, Dalvik and Cache). It says "most the time this is the only wipe that you need" and it means what it says. If you picked to go into Advanced (again, its labelled that way for a reason) you better know what you are doing and make sure before you confirm the wipes.

Categories

Resources