CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (Kit Kat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Working:
Assuming everything.
Not Working:
Data is wonky.
Installation Instructions
Coming From Stock:
Download latest CM10.1 Nightly from here, CM11 ROM and 4.4.2 GApps zips from below and copy to sdcard.
Reboot to recovery
Make a backup of current ROM setup and Data YOUR DATA WILL BE WIPED
Flash CM10.1 zip
Flash CM11 zip. Follow next step carefully
You will get a partition layout error. Flash CM11 zip again
Zip install will fail with set_metadata_recursive: some changes failed
Reboot recovery from advanced menu. Notice recovery version CWM-based Recovery 6.0.6.4
Wipe Data/Factory Reset
Flash CM11 zip one last time
Flash GApps
Reboot
Coming From CM10.1:
Download CM11 ROM and 4.4.2 GApps zips from below and copy to sdcard.
Reboot to recovery
Make a backup of current ROM setup and Data YOUR DATA WILL BE WIPED
Flash CM11 zip. Follow next step carefully
You will get a partition layout error. Flash CM11 zip again
Zip install will fail with set_metadata_recursive: some changes failed
Reboot recovery from advanced menu. Notice recovery version CWM-based Recovery 6.0.6.4
Wipe Data/Factory Reset
Flash CM11 zip one last time
Flash GApps
Reboot
ROM Download:
CyanogenMod 11.0 2/20/14
md5: e832432b4268255b63d5507c8a639e99
CyanogenMod 11.0 1/9/14
md5: 7c937708189ba0112d6882d724a3a695
CyanogenMod 11.0 1/4/14
md5: b7df574c383a58fac360f5dc962c69c
GApps:
PA 4.4.2 Modular Mini GApps
ROM take a bit to boot. Be patient.
Credit to:
CyanogenMod
TeamHacksung
jt1134
Disclaimer: I will more than likely not be supporting this very actively. Just posting this to get it out there.
Also, I have not tested installation with TWRP, nor do I have the desire to. I have only tested with the convoluted CWM debacle listed above.
Enjoy!
TWRP Install Instructions:
nm3210 said:
boot into TWRP, clear cache, install this new CM11 1/4, reboot recovery, install CM11 1/4 again, install new gapps 4.4.2, reboot.
Click to expand...
Click to collapse
Changelog:
repo sync'd upstream changes.
merged FascinateRIL class from https://github.com/TeamRegular/andr...mmit/6678964eac6a9443adc85ef34dad0c2e76f30d58
times_infinity said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (Kit Kat), which is designed to increase performance and reliability over stock Android for your device.
ROM take a bit to boot. Be patient.
Credit to:
CyanogenMod
TeamHacksung
jt1134
Disclaimer: I will more than likely not be supporting this very actively. Just posting this to get it out there.
Also, I have not tested installation with TWRP, nor do I have the desire to. I have only tested with the convoluted CWM debacle listed above.
Enjoy!
Click to expand...
Click to collapse
... WOW that has come out of nowhere!!! :victory:
Thank you Mr. Infinity
We haven't seen you really around here in ages,,, but VERY much appreciated!!!!
.
Uneventful update from CM11 12/06 with TWRP, everything works well even without formating my data! It did replace TWRP with CWM 6.0.4.6, but whatever. My successful steps were as follows: boot into TWRP, clear cache, install this new CM11 1/4, reboot recovery, install CM11 1/4 again, install new gapps 4.4.2, reboot. 3G/Wifi work. Have not tested MMS, but I assume it works like it did on previous CM11 builds.
Transparency is disabled by default now (for everyone who's curious) because in the build.prop the "ro.config.low_ram" option is set to "true". You can set it to false to get transparency (and anything else that gets flagged as low-ram) back.
nm3210 said:
Uneventful update from CM11 12/06 with TWRP, everything works well even without formating my data! It did replace TWRP with CWM 6.0.4.6, but whatever. My successful steps were as follows: boot into TWRP, clear cache, install this new CM11 1/4, reboot recovery, install CM11 1/4 again, install new gapps 4.4.2, reboot. 3G/Wifi work. Have not tested MMS, but I assume it works like it did on previous CM11 builds.
Transparency is disabled by default now (for everyone who's curious) because in the build.prop the "ro.config.low_ram" option is set to "true". You can set it to false to get transparency (and anything else that gets flagged as low-ram) back.
Click to expand...
Click to collapse
Can't wait to play with this! This may actually make me update to kitkat on my fascinate! Thank you sir!
whoa I haven't seen you in a long time. welcome back and whoa cm11.
you thinking of making these official?
Sent from my SCH-I500 using xda app-developers app
Unfortunately data is borked and cycles on and off. I first dirty flashed and then did a complete wipe and no difference.
kb8no said:
Unfortunately data is borked and cycles on and off. I first dirty flashed and then did a complete wipe and no difference.
Click to expand...
Click to collapse
Yeah a day later I agree. You can quick toggle it to get it to work for a few minutes but it's not very consistent. Also, maybe it's the new WhisperPush or something, but I couldn't send or receive MMS at all. When receiving MMS, I would get a notification (both my SMS Popup and an actual notification) but there was no message in MMS.apk and it definitely never downloaded anything.
hi
whats the difference between this one and the the 12/06 cm 11.0 ? anyone know cause i coudnt get it to load i bricked twice.....thanks foor your hard work though nice...
hutchjim said:
whats the difference between this one and the the 12/06 cm 11.0 ? anyone know cause i coudnt get it to load i bricked twice.....thanks foor your hard work though nice...
Click to expand...
Click to collapse
This one is a smoother and if data was fixed I think it would be great. Data drops drove me off this in hours. No problems flashing. Maybe you got a bad download.
12/6 was rougher and data drop plagued as well so not a DD.
12/6 was all good for me. I used it for almost a month without a hitch. Data worked fine too for me. Just the urge of flashing something new took over and I tried DU5 but was put off by random reboots. So switched to cm 11 1/04. Happy with it till date. Off course data is flaky but will live with it until it's rectified.
Sent from my SCH-I500 using Tapatalk
new build is up guys.
hopefully it fixes data.
Enjoy!
Running this latest build without any tweaks since yesterday. Data is stable and so is the ROM. Great work. Thanks. :thumbup::thumbup::beer:
Sent from my SCH-I500 using Tapatalk
great work!
lots of updates going through for the device on BBQlog so still curious why the Fascinate isn't officially being updated anymore?
trajik78 said:
great work!
lots of updates going through for the device on BBQlog so still curious why the Fascinate isn't officially being updated anymore?
Click to expand...
Click to collapse
jt1134, the official CM maintainer for the fascinate and a couple other devices (OG Tab 7 CDMA i think), has either retired the fascinate or isn't on TeamDouche anymore.
the performance setting and ART not stick ~
A-L31 said:
the performance setting and ART not stick ~
Click to expand...
Click to collapse
You might try chainfires supersu
perf settings seem buggy though. even on du
Don't know in art..
hhp_211 said:
You might try chainfires supersu
perf settings seem buggy though. even on du
Don't know in art..
Click to expand...
Click to collapse
sorry, i just found out. i use xposed frameworks. after uninstall it everything i described above is false.
ART Working (takes time to boot, i almost inpatient i think i'm on bootloop :victory: )
Performance Stick at boot ~ :silly:
A-L31 said:
sorry, i just found out. i use xposed frameworks. after uninstall it everything i described above is false.
ART Working (takes time to boot, i almost inpatient i think i'm on bootloop :victory: )
Performance Stick at boot ~ :silly:
Click to expand...
Click to collapse
Good to know, thanks for the update
i can't install app to sd card.
when i restore with TiBu it stuck. when i'm download from app store it says Couldn't install on USB storage or SD Card.
is it something to do with ART or the ROM?
what i'm trying to install / restore is whatsapp wallpaper. it goes automatically to SD
anyone?
Related
CyanogenMod is a free, community built distribution of Android 2.3 (Gingerbread) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* The CM team is not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting fired because the alarm app failed, or anything whatsoever.
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is an AOSP-based build with extra contributions from many people which you can use without any type of Google applications. I found a link from some other project that can be used to restore the Google parts, which can be found below or elsewhere in the thread. I've still included the various hardware-specific code, which seems to be slowly being open-sourced anyway.
Visit the CHANGELOG for a full list of changes and features!
All source code is available at the CyanogenMod Github!
If you'd like to to contribute to CyanogenMod, checkout our Gerrit instance.
INSTRUCTIONS:
- First time flashing CM 7 (or coming from another ROM)?
1. Unlock/root your device - http://forum.xda-developers.com/showthread.php?t=754020
2. Do a Nandroid backup!
3. Update your radio if necessary (use the latest posted by ChiefzReloaded)
4. WIPE
5. Install the ROM
5. Optionally install the Google Addon
- Upgrading from earlier CM7?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
HOW TO REPORT BUGS OR PROBLEMS?
- Was it a hard reboot? Get me the file "/proc/last_kmsg".
- Was it a soft reboot or a "boot loop"? Run "adb logcat" and get me the full output.
- Pastebin links preferred
- Please use the issue tracker whenever possible!
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
The preferred method of installation is via ROM Manager, or you can head over to the CM Forums for manual downloads.
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
Only thing I've noticed with the last 3 builds, including RC1, is that the CPU locks onto the max set frequency, but it could be a result of my at least 30+ nowipe flashes of nightlies from build 1 to now if the issue remains after wiping and flashing I'll report it on the issue tracker.
Thank you, it has been amazing watching your team build the nightlys for this. The ability to modify CPU without an additional app should win this rom an award as far as I am concerned. Once again thank you for the years of work your team has put into these roms on all devices.
Regards,
AMAZING EVERYTHING IS WORKING INCLUDEING WIFI !!! Ty For all you work.
Sent from my T-Mobile myTouch 3G Slide using XDA App
hoping that this has the fix 19 had for wifi
Virus1x said:
hoping that this has the fix 19 had for wifi
Click to expand...
Click to collapse
It should be based off of the latest source, which would mean that it includes all previous bugfixes and additions/modifications from the nightly builds. It should be working smoothly, although I still have to test to see if the max frequency locking issue is still there or not. It was in build 40 of the nightlies, but I'm going to wipe and flash RC1 and see if it still happens.
Thank you ...Amazing Work.
MusicMan374 said:
Only thing I've noticed with the last 3 builds, including RC1, is that the CPU locks onto the max set frequency, but it could be a result of my at least 30+ nowipe flashes of nightlies from build 1 to now if the issue remains after wiping and flashing I'll report it on the issue tracker.
Click to expand...
Click to collapse
Yeah, the RC1 build has the fix. Unfortunately the new librpc didn't play nice with our hacks for the proprietary GPS on the Slide.
Is the boot.img already modified for darktremor a2sd? I'd like to use that. Thanks!
In on 1st page!
Good Job Cyanogen
Smartass Cyanogen Kernel haha
Only Cyanogen can code better than Chucknorris
Wait the stock cyanogen kernel has a smartass governor? Well then there was absolutely no point to me installing miguel's smartass kernel oh well. I'll flash system back over itself with the mtd boot patcher and call it good, after restoring titanium.
Glad to hear the CPU issues were resolved, I can confirm, no more issues I guess I didn't have to wipe after all, but it was probably about time to anyway haha. And holy damn my signature is out of date.
I'm heartbroken..
guess I'm stuck on Nightly 19.
Rc1 looked so slick..
Well guess that sucks..
All of us with the CM6 WIFI error had working wifi with Nightly build 19 and RC1 broke it again..
thank-god for a backup..
PLEASE Cyanogen Fix the WIFI error for CM7.. I don't have 3G I depend on WIFI
Virus1x said:
I'm heartbroken..
guess I'm stuck on Nightly 19.
Rc1 looked so slick..
Well guess that sucks..
All of us with the CM6 WIFI error had working wifi with Nightly build 19 and RC1 broke it again..
thank-god for a backup..
PLEASE Cyanogen Fix the WIFI error for CM7.. I don't have 3G I depend on WIFI
Click to expand...
Click to collapse
This should work on CM7: http://forum.xda-developers.com/showthread.php?t=896963
also, does the boot.img have a2sd enabled?
pettigrew95 said:
This should work on CM7: http://forum.xda-developers.com/showthread.php?t=896963
also, does the boot.img have a2sd enabled?
Click to expand...
Click to collapse
everyone claims it breaks it but I'l try..
Virus1x said:
everyone claims it breaks it but I'l try..
Click to expand...
Click to collapse
That wifi fix worked beatifully for me
boot loop
Are you guys getting a boot loop??
I wiped, installed the rom, than the google addon. It gets to the sign in page but when I press on the android it boots back up to the boot animation.
whoisloon said:
Are you guys getting a boot loop??
I wiped, installed the rom, than the google addon. It gets to the sign in page but when I press on the android it boots back up to the boot animation.
Click to expand...
Click to collapse
Did you do a full wipe?
pettigrew95 said:
Did you do a full wipe?
Click to expand...
Click to collapse
Yea, I did a full wipe, Wiped system, boot, cache, and etc
whoisloon said:
Yea, I did a full wipe, Wiped system, boot, cache, and etc
Click to expand...
Click to collapse
Hmmm, I'm not sure then, sorry man.
pettigrew95 said:
that wifi fix worked beatifully for me
Click to expand...
Click to collapse
on cm7 rc1?
DISCLAIMER: I AM IN NO WAY RESPONSIBLE FOR ANY PROBLEMS ON YOUR DEVICES CAUSED BY FLASHING THESE BUILDS. THE UPSTREAM CODE AND BUILDING IS MAINTAINED BY THE CYANOGENMOD TEAM, NOT ME. I AM NOT ASSOCIATED WITH THEIR TEAM, I AM JUST THE THREAD OWNER.
What is CyanogenMod ? It is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors of these cell phones.
CyanogenMod 13.0 : Download
Changelog : Changelog
Open GApps : Download ( arm, 6.0, nano )
TWRP : Download
CM13 Nightlies, ROM for the Sprint Galaxy S5
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Nightly, now moved to 14.1
UPDATE 6/14: Looks like there's an issue that 5ghz network doesn't work on higher bands, but it works on 36-48 and bluetooth. Hopefully it will be fixed soon.
UPDATE 6/23: There's a fix attempt on boot image. Link. Thanks to @haggertk
UPDATE 6/27: Looks like Bluetooth and Wifi issue have been fixed since 6/25 nightly.
Thanks to @haggertk
Created 2016-05-12
Last Updated 2016-11-29
Reserved
Works great!
Is there a version of SuperSU that works with CM13? All trash the ROM and have to do full restore.
I just needed confirmation on something. I'm currently running CM12.1 on a SM-G900P with firmware G900PVPU3BOK4. Does the update to CM 13.0 require a firmware update to G900PVPU3CPCA (the MM level of firmware from the stock Sprint download) or can I stay on G900PVPU3BOK4 with CM13.0?
btw: Sorry for the double post. I'm new to XDA and having trouble figuring out which forum is correct for me to ask my questions in.
Thanks!
alexclang said:
I just needed confirmation on something. I'm currently running CM12.1 on a SM-G900P with firmware G900PVPU3BOK4. Does the update to CM 13.0 require a firmware update to G900PVPU3CPCA (the MM level of firmware from the stock Sprint download) or can I stay on G900PVPU3BOK4 with CM13.0?
btw: Sorry for the double post. I'm new to XDA and having trouble figuring out which forum is correct for me to ask my questions in.
Thanks!
Click to expand...
Click to collapse
From my limited experience, it does not appear to run on CPCA. CM13 on OK4 worked for me.
e-j said:
From my limited experience, it does not appear to run on CPCA. CM13 on OK4 worked for me.
Click to expand...
Click to collapse
Excellent!! I'll just install the latest nightly for CM13 just like I was going for 12.1 and hopefully things will go smoothly!
I'm having difficulty with CM13 and Open GApps. If I flash CM13 alone everything is fine. When I install CM13 and then the ARM 6.0 pico Open GApps through the same TWRP 3.0.2-1 session (as directed here: https://github.com/opengapps/opengapps/wiki/Notes-for-Android-6.0), I either get constant force close errors after boot (with 5/19 CM & GApps zips) or an endless blue android boot screen (with 5/20 CM & GApps zips). I've tried re-downloading the zips and reinstalling after wiping (dalvik, system, data, cache) multiple times.
Any ideas?
UPDATE/PSA: USE THE NANO GAPPS AS STATED IN THE OP. NANOGAPPS INFINITY OPENS THE DOOR.
e-j said:
I'm having difficulty with CM13 and Open GApps. If I flash CM13 alone everything is fine. When I install CM13 and then the ARM 6.0 pico Open GApps through the same TWRP 3.0.2-1 session (as directed here: https://github.com/opengapps/opengapps/wiki/Notes-for-Android-6.0), I either get constant force close errors after boot (with 5/19 CM & GApps zips) or an endless blue android boot screen (with 5/20 CM & GApps zips). I've tried re-downloading the zips and reinstalling after wiping (dalvik, system, data, cache) multiple times.
Any ideas?
Click to expand...
Click to collapse
I've had similar issues; all with Google apps. When I see it, I delete the Google app in question and then immediately re-install from the App store. Once I've done that, I haven't had the Google app force quit again.
alexclang said:
I've had similar issues; all with Google apps. When I see it, I delete the Google app in question and then immediately re-install from the App store. Once I've done that, I haven't had the Google app force quit again.
Click to expand...
Click to collapse
Got it working after I realized the OP specifically mentioned the "nano" GApps variant; booted fine after a clean install of CM13 & the nano zip.
Issues w. CM13 flash
Ok... slightly frustrated here.
Basic issue: Have flashed CM13 (Nightly 5.17.16) along with the latest Gapps. Upon reboot my phone will go to the Cyanagenmod splash screen, appear to load for several seconds, and then restart. It keeps doing this for at least 10 minutes until I turn it off. I have re-flashed a couple times after reloading the backup but no change.
Process I used: First of all my phone already has Android 6.0.1 firmware installed (not sure if that's an issue). I have TWRP setup as recovery and rooted with su 2.52 (and yes I verified the root prior to flashing). To flash I boot into recovery (obviously), factory reset, install cm13, clear dalvik, and repeat process with gapps. I've done this before with older CM's successfully but for some reason I can't get past the CM splash screen.
Any assistance is appreciated. If I have made a completely stupid error in my process or this exact issue is covered in another thread don't hesitate to point that out!!
Thank you in advance.
smspenc said:
Ok... slightly frustrated here.
Basic issue: Have flashed CM13 (Nightly 5.17.16) along with the latest Gapps. Upon reboot my phone will go to the Cyanagenmod splash screen, appear to load for several seconds, and then restart. It keeps doing this for at least 10 minutes until I turn it off. I have re-flashed a couple times after reloading the backup but no change.
Process I used: First of all my phone already has Android 6.0.1 firmware installed (not sure if that's an issue). I have TWRP setup as recovery and rooted with su 2.52 (and yes I verified the root prior to flashing). To flash I boot into recovery (obviously), factory reset, install cm13, clear dalvik, and repeat process with gapps. I've done this before with older CM's successfully but for some reason I can't get past the CM splash screen.
Any assistance is appreciated. If I have made a completely stupid error in my process or this exact issue is covered in another thread don't hesitate to point that out!!
Thank you in advance.
Click to expand...
Click to collapse
Would boot loop on the latest firmware for me as well; had to Odin back to OK4.
smspenc said:
Ok... slightly frustrated here.
Basic issue: Have flashed CM13 (Nightly 5.17.16) along with the latest Gapps. Upon reboot my phone will go to the Cyanagenmod splash screen, appear to load for several seconds, and then restart. It keeps doing this for at least 10 minutes until I turn it off. I have re-flashed a couple times after reloading the backup but no change.
Process I used: First of all my phone already has Android 6.0.1 firmware installed (not sure if that's an issue). I have TWRP setup as recovery and rooted with su 2.52 (and yes I verified the root prior to flashing). To flash I boot into recovery (obviously), factory reset, install cm13, clear dalvik, and repeat process with gapps. I've done this before with older CM's successfully but for some reason I can't get past the CM splash screen.
Any assistance is appreciated. If I have made a completely stupid error in my process or this exact issue is covered in another thread don't hesitate to point that out!!
Thank you in advance.
Click to expand...
Click to collapse
You had the official MM installed from Samsung, correct?
As far as I know, the current CM13 needs LP bootloader installed.
I have no issue with LP bootloader.
lentm said:
You had the official MM installed from Samsung, correct?
As far as I know, the current CM13 needs LP bootloader installed.
I have no issue with LP bootloader.
Click to expand...
Click to collapse
Yeah that was exactly the issue. Reflashed 5.0 then made the jump and it worked perfectly. So much wasted time...
---------- Post added at 05:28 AM ---------- Previous post was at 05:25 AM ----------
e-j said:
Would boot loop on the latest firmware for me as well; had to Odin back to OK4.
Click to expand...
Click to collapse
Yeah reflashing lollipop then installing cm13 did the trick.
Does this Rom fix Bluetooth issues?
Sent from my SM-G900P using XDA-Developers mobile app
has anyone got themes to work ine keeps crashing
manolze said:
has anyone got themes to work ine keeps crashing
Click to expand...
Click to collapse
Mine works fine with Puzzled UI - CM Theme from Play Store on 5/20 build.
I have no working theme chooser on this releaese
xenokc said:
Works great!
Is there a version of SuperSU that works with CM13? All trash the ROM and have to do full restore.
Click to expand...
Click to collapse
no need just go into developer and turn on root access
---------- Post added at 03:28 PM ---------- Previous post was at 03:24 PM ----------
anyone have a solution to theme chooser yet? i have already fixed phone dial problem and time out of sync problem
xpm69420 said:
no need just go into developer and turn on root access
---------- Post added at 03:28 PM ---------- Previous post was at 03:24 PM ----------
anyone have a solution to theme chooser yet? i have already fixed phone dial problem and time out of sync problem
Click to expand...
Click to collapse
Theme chooser works great for me, not having any issues with it. I am having an issue with the time being or of sync when set to automatic... How'd you fix it? Also, what's wrong with the dialer... can't say I'm having any issues there either.
unclejuju said:
Does this Rom fix Bluetooth issues?
Sent from my SM-G900P using XDA-Developers mobile app
Click to expand...
Click to collapse
I little late here, but CM 13.0 did NOT fix the S5 bluetooth issues. Still have the skipping and studdering.
This ROM is Going to be Primary Based on LineageOS 15.0 source or ROM compiled with Base as LineagesOS 15.0
I am going to regularly compile it and going to share it with community over here
Features of This ROM Based on LineagesOs 15.0
Customizable Theme Engine (Blend with Substratum)
Picture in Picture Mode of Android Oreo
Notification Dots
New user interface in Settings
Split Screen
Improved battery life
Notification Snoozing
Android Oreo Navbar
New UI in Status Bar and Quick Tiles
New Emojis based on Android Oreo
And much more.
Download
For Nexus 6 Android file Host
Gapps For Oreo
Opengapps You can get that from Oppengapps.org
Gaapps For 8.1 Till Open gapps start official Build
The Build is from @Nezorflame And Gapps downlod from
Do NOT expect daily builds. I'll build when I'm free.
Do NOT use this unofficial build and ask for support at the official threads.
Do NOT be rude.
Respect all users
If you see a NOOB question and you don't feel like replying, DON'T, just ignore that post. If you do reply, good for you.....and be nice in your reply.
1st Time Installing
You Need To have Rooted and Custom Recovery Installed Phone To Use This ROM
If you are New Just Go To This Thread and Download Wug's Nexus Tool Kit And Follow Instructions.
Once Custom Recovery Installed. TWRP 3.1.x recommended
Download the zip
Download Gapps
WIPE DATA/FACTORY RESET
Install Modem/Firmware Update
Install the update zip from recovery
Install Gapps
flash Magisk14.1 or 14.0 .zip
Reboot
Already Using the Previous Version of Same ROM
Download the zip
Install latest zip from recovery
wipe Cache
Reflash Gapps
Flash Magisk
Reboot
Credits:
LineagesOs team
CRdroid Team
ScottHeart BTi
He][razor
Vortex 1969
neobuddy89
XDA Developers community
The users and all developer of XDA who has helped me direct or indirect way
Google for Android.
If I miss someone Here please point it out to me.
Source
https://github.com/LineageOS/
https://github.com/crdroidandroid
XDA:DevDB Information
SourceBuilt ROM for Nexus 6, ROM for the Nexus 6
Contributors
chineel, chineel
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: LineageOs
Version Information
Status: Beta
Created 2017-10-28
Last Updated 2017-10-28
Hi everyone The ROM Upload is still On
I have two build Ready One is LineagesOs unofficial and second One CrDroid4.0 which is also based on LineageOs 15.0
Both Got Uploaded
first is Crdroid
crDroidAndroid-8.0-20171028-shamu-v4.0.zip
Second One is LineagesOs-15.0
lineage-15.0-20171028-UNOFFICIAL-shamu.zip
Both Rom are unofficial nothing official about it.
For best error free opration you need to have it Clean Installed
means
Factory reset
wipe
System, Cache,
Flash ROM
Flash Gapps
Flash Magisk / Super Su for rooting
Wait for a while
let it get settled
Enjoy the New Oreo 8.0
11/07 Build Onwards forced encryption is removed so your data by default is not encrypted anymore.
For all those having trouble booting should follow below steps.
get ADB fastboot installer from here
Take back up of everything including DCIM and TWRP or TITANIUM or SMS contact backup or any other.
reboot to bootloader.
open command prompt.
fastboot format userdata (This will format everything on internal storage and will recreate data partition)
wait till success message.
reboot to recovery
wipe system cache data (if you like to but not needed this time)
flash ROM
Flash Gapps of your choice.
wipe dalvick and cache
Reboot
wait for a while
let your phone settle for some time.
reboot to recovery again
flash magisk
reboot
Enjoy your phone unencrypted and fresh as new. Connect to pc copy back your data
restore back whatever you want to restore enjoy.
3rd one
i may Need this one also
Great work! Had any issues with random reboots?
rebel1699 said:
Great work! Had any issues with random reboots?
Click to expand...
Click to collapse
No No reboot since yesterday on my phone
chineel said:
No No reboot since yesterday on my phone
Click to expand...
Click to collapse
Good deal. Will install in the morning and test it out. Again, great work to help keep shamu alive
Hey man thanks for the efforts, a little OT question tho, i saw you got a crDroid build on AFH, are you the new maintainer? edit: Oops, just read the 2nd post ^^ .
gr3ud said:
Hey man thanks for the efforts, a little OT question tho, i saw you got a crDroid build on AFH, are you the new maintainer? edit: Oops, just read the 2nd post ^^ .
Click to expand...
Click to collapse
I am going to request for that if I can continue compiling this ROM but till then Unofficial only
Downloading now. Pretty excited since I'm currently running crdroid.
Do you keep a changelog you're willing to share?
Schiben said:
Do you keep a changelog you're willing to share?
Click to expand...
Click to collapse
For CRdroid already in ROM About section attached here also
Lineageos changelog https://www.lineageoslog.com/15.0
Thank you very much for your great work ? I like this rom
I will try LOS version tonight. Any known bluetooth or Mobile data issues so far ?
Thanks for the effort and appreciate the continued update for Nexus 6.
Hi, I appreciate the effort. Mind telling us the differences between ROMs though? Does the CR one have more features than the stock based Lin one? Still going to test them both but was just wondering, thanks.
mobile data is ON by default, and even when you're connected with Wifi, it still uses your data. Blew thru my 200meg Free T-mobile trying to finish an install. Also, found that NFC is turned off. Might be a driver issue.
Battery life is OK. Sound is bad on my device. Playing some youtube videos, and the sound goes from very loud, to I can barely hear it, plus the only speaker working, is the top, the bottom one cuts in and out. (at least in youtube)
not a bug report, or any disrespect to the dev. but, its just what I've had happen while using this rom.
newsguy99 said:
mobile data is ON by default, and even when you're connected with Wifi, it still uses your data. Blew thru my 200meg Free T-mobile trying to finish an install. Also, found that NFC is turned off. Might be a driver issue.
Battery life is OK. Sound is bad on my device. Playing some youtube videos, and the sound goes from very loud, to I can barely hear it, plus the only speaker working, is the top, the bottom one cuts in and out. (at least in youtube)
not a bug report, or any disrespect to the dev. but, its just what I've had happen while using this rom.
Click to expand...
Click to collapse
Mobile data can be stopped from developer options and untick mobile data always on
steps
1 Open about Phone
2 Go to build number
3 Tap continuous till you got message you are now developer.
4 Tape on Back button
5 You will be seeing Developer options now
6 scroll down till you see mobile data always on toggle it off
Bluetooth issue was found for me when connected to my head unit in my truck. It connects, blurps sound out for half a second and then nothing the songs/videos(videos also go down to like 2 fps while paired) are still playing during but no audio. It's late I just got home will try to capture a log tomorrow. Other than that this rom is butter smooth, thanks for your hard work keeping our old whale swimming. Plz remove if it needs to be I won't be butthurt about it.
Xd great work!
Lineage OS 16.0 for the SM-T550 is here!
This is an early stage alpha build; not all features are working well at the moment.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
In the beginning I would like to thank:
Lineage OS team,
Contributors:
deadman96385
MSM8916 team
elginsk8r
Instructions
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:
(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, Data and ART/Dalvik cache.
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Flash the root solution of your choice (optional).
7. Reboot your device.
Reporting bugs:
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Issues
- SELinux permissive
- encryption
- audio through speakers is broken, headsets and bluetooth audio works
Download link: https://www.androidfilehost.com/?w=files&flid=284367
XDA:DevDB Information
Lineage OS for the SM-T550, ROM for the Samsung Galaxy Tab A series
Contributors
virsys, @deadman96385, @Galaxy-MSM8916 team, @elginsk8r worked on the device trees
Source Code: https://github.com/Galaxy-MSM8916
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Beta
Created 2018-11-06
Last Updated 2018-11-16
First....
I will have to give this a try
Thank you for your contribution good sir
My model: SM-T550
Thank you for downloading! I am going to test about LineageOS 16, if I have problem? I will talk with you. ?
Well, I like new ROM Pie.
---------- Post added at 02:01 AM ---------- Previous post was at 01:27 AM ----------
I have one problem. Please read here:
I did make to flash ROM and GApps, but... Error
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Warming: No file_contexts
E3004: This package is for device: gt510wifi,gt510wifixx,SM-T550; this device is.
E: unknow command [log]
E: Error executing updater binary in zip '/external_sd/SM-T550/lineage-16.0-20181106-UNOFFICIAL-gt510wifi.zip'
Error flashing zip '/external_sd/SM-T550/lineage-16.0-20181106-UNOFFICIAL-gt510wifi.zip'
Updating partition details....
.... Done
How do I do? I'm waiting your answer! Thanks for test!
Kawakigachi said:
Thank you for downloading! I am going to test about LineageOS 16, if I have problem? I will talk with you.
Well, I like new ROM Pie.
---------- Post added at 02:01 AM ---------- Previous post was at 01:27 AM ----------
I have one problem. Please read here:
I did make to flash ROM and GApps, but... Error
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Warming: No file_contexts
E3004: This package is for device: gt510wifi,gt510wifixx,SM-T550; this device is.
E: unknow command [log]
E: Error executing updater binary in zip '/external_sd/SM-T550/lineage-16.0-20181106-UNOFFICIAL-gt510wifi.zip'
Error flashing zip '/external_sd/SM-T550/lineage-16.0-20181106-UNOFFICIAL-gt510wifi.zip'
Updating partition details....
.... Done
How do I do? I'm waiting your answer! Thanks for test!
Click to expand...
Click to collapse
I can say it possibly a bad download or something on your end I flashed this last night with very few issues I have not used LOS in a long time but I was impressed
For some odd reason it's not working for me. At first it gave me Error 7 code telling me that my device isn't a T550. Then I manually removed the "assert" check lines from the ZIP file to force the install without a device check. It installed. But I can't boot into the OS. It just kicks me back to TWRP every time.
Never mind, after trying once more, it finally worked.
DJCodeBlue said:
For some odd reason it's not working for me. At first it gave me Error 7 code telling me that my device isn't a T550. Then I manually removed the "assert" check lines from the ZIP file to force the install without a device check. It installed. But I can't boot into the OS. It just kicks me back to TWRP every time.
Never mind, after trying once more, it finally worked.
Click to expand...
Click to collapse
Hey does this lag like crazy for you
even setup took me forever to get passed I normally let a new flash sit around for about a hour to the the system calm down still real laggish
HoosierDaddy said:
Hey does this lag like crazy for you
even setup took me forever to get passed I normally let a new flash sit around for about a hour to the the system calm down still real laggish
Click to expand...
Click to collapse
It wasn't that bad actually, it seemed to settle in for me. But I switched back to an Oreo rom for the time being for the bugs to get ironed out. Now I'm dealing with a super sluggish ROM lol. Do you have any recommendations for a good Oreo debloated ROM that performs great on the T550?
DJCodeBlue said:
It wasn't that bad actually, it seemed to settle in for me. But I switched back to an Oreo rom for the time being for the bugs to get ironed out. Now I'm dealing with a super sluggish ROM lol. Do you have any recommendations for a good Oreo debloated ROM that performs great on the T550?
Click to expand...
Click to collapse
Not oreo im trying to find anything that dont lag now
I ended flashing stock nougat and rooting it...
Been working on that....
I got so used to my s8 This tablet seems kinda slow lol I tried another rom I think that jazz rom but about the same lag and I couldnt remove home screen icons without uninstalling them the little popup menu wouldnt work
---------- Post added at 07:14 AM ---------- Previous post was at 07:13 AM ----------
I still have expectations for this old tablet without any doubts there are a few of us out here with the 550 so we can band together and get something going I just got mine so Im stuck with the device for a while
Switched from a S8 to this tablet, that's real fortitude .. May I ask why you did this? The tablet is already antique. This is called a feature for slowing movement. Audio is working now, I will upload a new build tomorrow. I was able to install gapps without any problem and I don't feel like the device is "laggy as hell". Make sure to select Android 9 and ARM at opengapps.org, I choose always pico there and have no issues.
virsys said:
Switched from a S8 to this tablet, that's real fortitude .. May I ask why you did this? The tablet is already antique. This is called a feature for slowing movement. Audio is working now, I will upload a new build tomorrow. I was able to install gapps without any problem and I don't feel like the device is "laggy as hell". Make sure to select Android 9 and ARM at opengapps.org, I choose always pico there and have no issues.
Click to expand...
Click to collapse
I have one problem. Please read here:
I did make to flash ROM and GApps, but... Error
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Warming: No file_contexts
E3004: This package is for device: gt510wifi,gt510wifixx,SM-T550; this device is.
E: unknow command [log]
E: Error executing updater binary in zip '/external_sd/SM-T550/lineage-16.0-20181106-UNOFFICIAL-gt510wifi.zip'
Error flashing zip '/external_sd/SM-T550/lineage-16.0-20181106-UNOFFICIAL-gt510wifi.zip'
Updating partition details....
.... Done
How do I do? I'm waiting your answer! Thanks for test!
Kawakigachi said:
E3004: This package is for device: gt510wifi,gt510wifixx,SM-T550; this device is.
Click to expand...
Click to collapse
Sometimes that issue is caused by TWRP. It means that TWRP fails to get the device model, which is required for new install scripts. Consider updating TWRP.
Nice! Good News! LineageOS 16
virsys said:
Sometimes that issue is caused by TWRP. It means that TWRP fails to get the device model, which is required for new install scripts. Consider updating TWRP.
Click to expand...
Click to collapse
Thanks for help us! Now, my tablet works. Ready, I test all in my tablet. Wow! It's very great apps or boot, all.... I really love in your new ROM LineageOS 16. If you tell me about the Audio doesn't working"? No problem.... I am using "headsets and bluetooth audio works", its better . ????
Thank you for great ROM LineageOS 16. I give you "Rating: 100% or 5 Star" I'm waiting in your answer!
Sm-T555 please
virsys said:
Switched from a S8 to this tablet, that's real fortitude .. May I ask why you did this? The tablet is already antique. This is called a feature for slowing movement. Audio is working now, I will upload a new build tomorrow. I was able to install gapps without any problem and I don't feel like the device is "laggy as hell". Make sure to select Android 9 and ARM at opengapps.org, I choose always pico there and have no issues.
Click to expand...
Click to collapse
Please make build for T555 (I tried to edit it, but then the animation doesn’t start up )
Put your aicp 13.1, which you did not even publish here, but there are two errors: the camera does not work, and there is no sound except vibro
dfg30988 said:
Please make build for T555 (I tried to edit it, but then the animation doesn’t start up )
Put your aicp 13.1, which you did not even publish here, but there are two errors: the camera does not work, and there is no sound except vibro
Click to expand...
Click to collapse
I don't even get why you are trying to point the finger at me because of this. Trying to edit compiled builds is very dumb. Go ahead and compile it from scratch. I don't own a SM-T555 -> I can't test my builds properly. The result is a half-broken always-alpha build like the one on my afh account. That's the reason why there is no thread. Feel free to donate me that tablet, maybe I find some time to build it then for you.
I've updated the SM-T550 build now btw, audio is working now. I've tested the gapps-setup, too. It took me 30 seconds to get through. The device was fully wiped, maybe that's the reason for the speed..
Everything I need works fine
I just started thinking about using my old Samsung Tablet again as a remote.
When I saw that there is a LineageOS build available I just installed it.
Everything I need to use my tablet as a remote works perfectly fine and way better and faster than with the crappy touchwiz on our device.
Installation was done in 15 minutes or even less.
Thank you very much for your efforts!
Waiting for the stable version for this...
Thanks Virsys to keep alive this fossile
layman22 said:
Waiting for the stable version for this...
Thanks Virsys to keep alive this fossile
Click to expand...
Click to collapse
Good morning layman,
the version is quite stable actually. The only things missing are SELinux and the encryption/decryption of the internal storage does not work. May I ask you for the build number of the original operating system made by Samsung? These builds are for the SM-T550/gt510wifi/Samsung Galaxy Tab A 9.7 WiFi only. Have you enabled OEM unlocking in the developer options if there is this option?
virsys said:
Good morning layman,
the version is quite stable actually. The only things missing are SELinux and the encryption/decryption of the internal storage does not work. May I ask you for the build number of the original operating system made by Samsung? These builds are for the SM-T550/gt510wifi/Samsung Galaxy Tab A 9.7 WiFi only. Have you enabled OEM unlocking in the developer options if there is this option?
Click to expand...
Click to collapse
Dear Virsys, now I'm using your Oreo AICP build, so I can't tell you the original Samsung os's build number unfortunately...
But it was crap with full of needless ****s :laugh:
Than now I'll test this Pie build soon!
Thanks for your reply and have a nice day!
My model: SM-T550
Just tried to flash and when it starts i get
Android System
There,s an internal problem with your device . Contact your manufacture for details.
When i start to setup if i skip wifi setup all goes fine but if i sign into wifi i get setup has stopped , other than that all else works great.
It's still an alpha version and it will stay alpha until LineageOS 16.0 is officially released. To minimize the bugs avoid dirty flashing and restoring apps with titanium backup. Use ARM Pie gapps from opengapps.org, I recommend using nano or pico.
#include <std_disclaimer.h>
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Download: Link
- Works
Everything so far
- Doesn't work
You tell me
Source: https://github.com/Galaxya50
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery (has to be a custom recovery. TWRP, OrageFox, etc.)
Make a backup of ur data (Not Necessary)
Wipe Cache, Dalvik, System, Data (wiping internal storage is not necesary)
Flash the latest build
Flash Gapps
Reboot
DIRTY FLASH (may cause bugs. not recommended):
Download the latest build
Reboot to recovery
Flash the latest build
Flash Gapps
Wipe Cache
Reboot
Builder: Me
Awesome work !
Keep it up
Battery saving is amazing
rezabahramnezhad said:
Battery saving is amazing
Click to expand...
Click to collapse
Please add fod animations
rezabahramnezhad said:
Please add fod animations
Click to expand...
Click to collapse
will try if i have time
which gapps can i use on this rom? flamegapps and mindthegapps didnt work
TedFin said:
which gapps can i use on this rom? flamegapps and mindthegapps didnt work
Click to expand...
Click to collapse
try nikgapps
Scorpionkm469 said:
try nikgapps
Click to expand...
Click to collapse
it worked, thanks!
Scorpionkm469 said:
Download: Link
- Works
Everything so far
- Doesn't work
You tell me
Source: https://github.com/Galaxya50
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery (has to be a custom recovery. TWRP, OrageFox, etc.)
Make a backup of ur data (Not Necessary)
Wipe Cache, Dalvik, System, Data (wiping internal storage is not necesary)
Flash the latest build
Flash Gapps
Reboot
DIRTY FLASH (may cause bugs. not recommended):
Download the latest build
Reboot to recovery
Flash the latest build
Flash Gapps
Wipe Cache
Reboot
Builder: Me
Click to expand...
Click to collapse
Can I flash it on my Samsung A505f device?
Shuvops said:
Can I flash it on my Samsung A505f device?
Click to expand...
Click to collapse
yes
Please help. My a50 is bugging out every time I turn it on the screen just dims and dims until the screen is just off. The touch screen works because I can turn on the flashlight etc but I can't see anything on the screen, I'm using crdroid 8.9
It's happened twice already. If I let it go on stand by with NO activity for a few hours it will then start working again and that's a pretty big inconvenience when it stops working
This hasn't happened any other time with other ROMs than crdroid
And I really dont wanna switch ROMs either before I get my other phone fixed because this is a rom I like
This always happens when I restart the phone. Not always when I restart it but sometimes
Like now when I let it stay off the night not on the charger in the morning (now) it started working again
TedFin said:
Please help. My a50 is bugging out every time I turn it on the screen just dims and dims until the screen is just off. The touch screen works because I can turn on the flashlight etc but I can't see anything on the screen, I'm using crdroid 8.9
It's happened twice already. If I let it go on stand by with NO activity for a few hours it will then start working again and that's a pretty big inconvenience when it stops working
This hasn't happened any other time with other ROMs than crdroid
And I really dont wanna switch ROMs either before I get my other phone fixed because this is a rom I like
This always happens when I restart the phone. Not always when I restart it but sometimes
Like now when I let it stay off the night not on the charger in the morning (now) it started working again
Click to expand...
Click to collapse
huh, thats strange, might be hardware but im not 100% sure since u said its not happening on other roms. i havent had any issues with crd in these few weeks that ive been using it. can you try LOS19.1 that i built and see if it happens with it as well? u can comment on that post if it does
Hi.
This is a great rom, all features that I want from pixel and battery nearly identical to stock.
I think this is known issue, but Bluetooth audio,as in calls via headset,are NOT working. I went into telegram groups but couldn't find any working solution,I already tried to disable wifi but still not working. Could you please offer any advice or at least put it in known bugs?
Thanks.
keymanjg said:
Hi.
This is a great rom, all features that I want from pixel and battery nearly identical to stock.
I think this is known issue, but Bluetooth audio,as in calls via headset,are NOT working. I went into telegram groups but couldn't find any working solution,I already tried to disable wifi but still not working. Could you please offer any advice or at least put it in known bugs?
Thanks.
Click to expand...
Click to collapse
cant say, i didnt try bluetooth but ik its not working on some roms. dunno a fix to it, ill ask around and try to find a fix for bt calls not working. thx for pointing it out
Do I have to install Android 12 stock firmware on A505f before installing this?
If so then where can I find it?
cir.s72 said:
Do I have to install Android 12 stock firmware on A505f before installing this?
If so then where can I find it?
Click to expand...
Click to collapse
there isnt stock firmware a12 for a505. and no, u can just flash it as usual
Works great thanks
just a reminder that crdroid version 8.10 is available
crDroid.net - crDroid 8.10 released and crDroid 9 updates
October 2022 security patches merged and crDroid 9 development progress
crdroid.net
I have a wifi problem. When I try to connect to my private wifi it instantly just turns off wifi. Mobile Data works without problems. I dont know if I did anything wrong, I also did the advanced wipe in orangefox recovery(which comes with magisk). Then I installed the rom and nikgapps core + androidauto addon (nikgapps-SL android12.1). And then rebooted to recovery -> and rom started successfully.
I always used the stock rom with root so I cant really tell whats the issue here.
Model: SM-A505FN
Also thanks for your effort to make this rom work
EDIT: I did the same steps but this time I booted to system instead of recovery and it worked.
RequestFX said:
I have a wifi problem. When I try to connect to my private wifi it instantly just turns off wifi. Mobile Data works without problems. I dont know if I did anything wrong, I also did the advanced wipe in orangefox recovery(which comes with magisk). Then I installed the rom and nikgapps core + androidauto addon (nikgapps-SL android12.1). And then rebooted to recovery -> and rom started successfully.
I always used the stock rom with root so I cant really tell whats the issue here.
Model: SM-A505FN
Also thanks for your effort to make this rom work
EDIT: I did the same steps but this time I booted to system instead of recovery and it worked.
Click to expand...
Click to collapse
i experienced some wifi issues as well, dont know whats causing it but usually a reboot fixes it