Hey lads.
Today i tried rooting my tablet using this -> http://forum.xda-developers.com/showthread.php?t=2240029
I did everything from the instructions and first time didn't work. I tried 2nd time and it didn't work. Then I downloaded the RV27RC03_WW_GEN1 system.img, copied it in the "system_image" folder. I started rooting it for the 3rd time (because I was a fu*ktard) and when it finished it was bricked. I tried turning it on, but it wouldnt turn on, then i inserted a needle in the reset hole. It turned on, but it froze on the acer logo. When I got in the system recovery I made a factory reset. Can someone please help me unbrick it. Thanks.
bump
BlackCopper said:
Hey lads.
Today i tried rooting my tablet using this -> http://forum.xda-developers.com/showthread.php?t=2240029
I did everything from the instructions and first time didn't work. I tried 2nd time and it didn't work. Then I downloaded the RV27RC03_WW_GEN1 system.img, copied it in the "system_image" folder. I started rooting it for the 3rd time (because I was a fu*ktard) and when it finished it was bricked. I tried turning it on, but it wouldnt turn on, then i inserted a needle in the reset hole. It turned on, but it froze on the acer logo. When I got in the system recovery I made a factory reset. Can someone please help me unbrick it. Thanks.
Click to expand...
Click to collapse
I have done a similar thing and was wondering if you ever found a way to fix it as am stumped.
Help...when i flash the firmware OS_Acer_AV052.RV27RC03.WW.GEN1_A42J_A.zip using stock recovery of aer iconia a1 810 it completed
but when i reboot it ....its not turning on...and not vibrating...and when i connect tablet to pc......it connect and disconnect......so plzzzz.help me......its very important..
Can Somebody help me?
Got onto a bootloop after flashing CWM for A1-810 from falshify
Now it doesnt work even cant enter the recovery, Just the acer logo the vibration and
this same process again, It was working perflecty with root
Please help me, also my computer recognize it for 1 second until it bootloops again
Error EMMC ?
Hello. I can not speak English ..a little help from me.
Acer Iconia A1 810 can not be formatted. Why 117 Gb + 8192Mb EMMC
How can you fix it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
even i have the same issue but for me m tab was working fine but suddenly it stopped , i tried to restart but it was stuck on logo so i went to do a hard reset , after hard reset it got stuck on erasing for a long time and then turned off. when i restarted it shows the logo and shows erasing and goes to recovery mode i tried everything using its firmwire to install from sdk and using sp flash tool and fastboot mode but still no use .plz someone help me fix this i iam in this issue for about a month nw still not fixing
me too, now I try to find update file to try it from recovery, but I am not successful
Odoslané z SM-N9005 pomocou Tapatalku
hello guy's i have the same issue, anyone can help me
all the best
zsolt0616 said:
Hello. I can not speak English ..a little help from me.
Acer Iconia A1 810 can not be formatted. Why 117 Gb + 8192Mb EMMC
How can you fix it?
Click to expand...
Click to collapse
Related
Hi, I am trying to root this phone using the guide here: bbs.elephone.hk/thread-9919-1-1.html#.WGr04lzUHIU
However in Windows 10, nothing happens when I hit the download button, and in Linux this error happens when using the files I got from the guide:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is the same PC, with Ubuntu and Windows 10 dual boot
I have tried the fastboot method, but I can't get my bootloader to unlock, the vol up button simply doesn't register on the phone.
So is there any fix? Or am missing something?
Problem solved! Windows 10 doesn't like the drivers provided. However Windows 7 does, so I advise that you keep your Windows 7 install somewhere
Follow this it will explain what you need to do. I had same issue with Windows 10 but rooted my P9000 no problem. I used FlashTools - all the info you need here:
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
I gave up following tutorials on elephone.hk forum & just followed tutorials from here, but whatever your personal preference - hope it helps ;0)
Need my elephone back
Not sure if this is best placed here???
So....tried to flash my Elephone P9000 using the SmartPhone Flash Tool and all the steps provided tutorial at:
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Using Win10 so it took me a while to disable the driver signature enforcement option to get the drivers installed. Got that done and all..so far so good.
Download all the files as the tutorial says...clicked download and connected the phone which was powered off. Up pops a messages "PMT changed for ROM; it must be downloaded."
Google search for this and came across some pages that informed me to click on the 'Format' section in the Flash Tool
Did this and then went back into 'Download' and hey presto, the flash worked and I got the big green tick.
Lovely stuff...until I tried to power on my phone....dead in the water. Power+Volume Up does nothing, power on its own does nothing. I've downloaded loads of instances of the Flash Tool, tried the elephone stock ROM scatter file, recovery image files etc and still nothing. Read loads of similar pages where it's happened to others but just wont work for me!!!!
Can anyone help?
jfk247 said:
Not sure if this is best placed here???
So....tried to flash my Elephone P9000 using the SmartPhone Flash Tool and all the steps provided tutorial at:
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Using Win10 so it took me a while to disable the driver signature enforcement option to get the drivers installed. Got that done and all..so far so good.
Download all the files as the tutorial says...clicked download and connected the phone which was powered off. Up pops a messages "PMT changed for ROM; it must be downloaded."
Google search for this and came across some pages that informed me to click on the 'Format' section in the Flash Tool
Did this and then went back into 'Download' and hey presto, the flash worked and I got the big green tick.
Lovely stuff...until I tried to power on my phone....dead in the water. Power+Volume Up does nothing, power on its own does nothing. I've downloaded loads of instances of the Flash Tool, tried the elephone stock ROM scatter file, recovery image files etc and still nothing. Read loads of similar pages where it's happened to others but just wont work for me!!!!
Can anyone help?
Click to expand...
Click to collapse
this usually happends when your flashing with old preloader... try installing CM13 with updated preloader, it should work.
Thanks Ruben, I managed to get the green tick in the sm flash tools using the 'Elephone P9000 Preloader_Lk_Boot_Recovery update' scatter text file.
Phone still wont power on at all and i can't access the sd card to copy across any ROMS so I'm back to square 1 by the looks of it. I'll keep pluggin away at it.
Help! I just unbricked my Le Max 2, it reboots with the screen splitted into two, the left half on the right and the right half on the left. Please can anyone kindly help?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after unbrick.
I use FlashOne 1.9 and a QFIL rom to unbrick it.
unbrick it again.
AhmadSant said:
unbrick it again.
Click to expand...
Click to collapse
re-unbricked, same result.
ok, can you do firstly reset factory, then try to install another rom.
AhmadSant said:
ok, can you do firstly reset factory, then try to install another rom.
Click to expand...
Click to collapse
factory reset and flashed another rom via fasboot, but reboot stuck at the start screen, just like the left one on the photo I submitted.
Do another unbricking, and everything back to the state I reported.
It's confirmed to be a hardware problem, when the monitor is replaced, everything back to normal.
I think there is problem with build.prop .. try google ... To restore build.prop
It seems that the Kernel is also affected so it must be hardware problem
hi did you solve this?
I have the same problem
KM141 said:
Click to expand...
Click to collapse
Hi, I have exactly the same problem after following the tutorial in here to get rid of the vendor encrypted god damn rom. Everything was working right before it so I don't buy the hardware issue. After flashing using flashone 2.0 I did ended up with my screen like this.
I tried several qfill file from severals sources and always the same result. I even try to go on and flash TWRP and RR rom but screen stay that way.
Please, I'm seriously desperate right now... I need your help guys and looks like i'm not the only one.
KM141 said:
Click to expand...
Click to collapse
Bambulbizarre said:
Hi, I have exactly the same problem after following the tutorial in here to get rid of the vendor encrypted god damn rom. Everything was working right before it so I don't buy the hardware issue. After flashing using flashone 2.0 I did ended up with my screen like this.
I tried several qfill file from severals sources and always the same result. I even try to go on and flash TWRP and RR rom but screen stay that way.
Please, I'm seriously desperate right now... I need your help guys and looks like i'm not the only one.
Click to expand...
Click to collapse
It was solved without replacing the screen!
Ok so, I did as shown in the topic : https://forum.xda-developers.com/le-max-2/help/flash-eui-rom-fastboot-t3525831
download twrp (The one I know didn't had the touchscreen issue)
boot from twrp (wish I had know about it before!) and not from one installed
upload zip file to /sdcard ( here's the catch, while in TWRP in don't have access to adb, the phone doesn't connect to pc or I don't know even I mount it, could be me. So i just put the archive at the root of the phone before booting to twrp from adb)
install rom
reboot
And ... it's ****ING WORKING!*
Really big thanks to ThE_MarD for his help!
For complete version :
https://forum.xda-developers.com/showpost.php?p=74890577&postcount=138
Bambulbizarre said:
It was solved without replacing the screen!
Ok so, I did as shown in the topic : https://forum.xda-developers.com/le-max-2/help/flash-eui-rom-fastboot-t3525831
download twrp (The one I know didn't had the touchscreen issue)
boot from twrp (wish I had know about it before!) and not from one installed
upload zip file to /sdcard ( here's the catch, while in TWRP in don't have access to adb, the phone doesn't connect to pc or I don't know even I mount it, could be me. So i just put the archive at the root of the phone before booting to twrp from adb)
install rom
reboot
And ... it's ****ING WORKING!*
Really big thanks to ThE_MarD for his help!
For complete version :
https://forum.xda-developers.com/showpost.php?p=74890577&postcount=138
Click to expand...
Click to collapse
To put a file on the phone while in twrp just use adb push
KuranKaname said:
To put a file on the phone while in twrp just use adb push
Click to expand...
Click to collapse
That's what I tried but as stated in the last link, I had no connection to adb while in twrp after cleaning up.
Anyway that's settled for me, it's mor for other that have encountered this as well. Replacing screen is not the only way.
Hi, Im new to all of this and hope anyone could help me out.
I have a problem with my tv box because of installing
SuperSU.
First of all, my box is rooted from factory. Its a beelink gt king. But super su isnt installed like when you root a phone and it shows. So I tried to install it because I needed to hide my root from some apps/games. I installed magisk but I needed this supersu also apparently? Well, anyway I did. And then the problem of the binary occupied appears. So Im googleing some solutions and it says that first you need to install a previous version and then update from play store but in play store there is no more supersu.
But anyway I installed the previous version, asked me to reboot system, I did, and now I have a tv box that is stuck in the logo. Actually not in logo..it passes the beelink logo in about 2 hours, then comes the skull with glowy eyes and thats when it stays. I have waited hours for the skull to change to the homescreen to no avail.
The second problem is I have been trying to reset the box but I just cant do it or the system cant?. Its really stuck. Maybe Im missing something? I dunno. I push the reset button that is at the bottom in this box, then I plug the power cable, wait some time, release...but nothing happens.
What I am doing wrong?
Please help someone.
And can you tell me a method without a PC? Unbelievably I dont have a PC. And this phone cant be rooted or at least is very difficult to root or so they say (a galaxy note 4 verizon).
But at the end it doesnt matter. Whatever it takes to fix this box. Thank you.
GT KING SD Card Update
Hi Hansell1001, I did the same thing and faced the exact same issue. But i happened to have a PC. But i think this can also be done via a Phone and a SD card.
First download the firmware as per your model (As per your serial number under the box) to your phone.
Firmware: For C922X and SA9X and SB9X versions
http://t.cn/A6zQGfda
Firmware: For B922 versions（04.01.2020 add）
http://t.cn/A6ZNxNkM
Firmware: For S922 versions（04.01.2020 add）
http://t.cn/A6ZNxe7R
1. Now extract the content of the zip file.
2. You should see a folder called “sd_card”.
3. Copy the content of that folder (I.e factory_update_param.aml, recovery.img and galilei-ota-eng.xk.zip) to the root of SD Card.
IMPORTANT: (the SD card format must be FAT32)
4. Insert the SD Card to the SD slot at the side of the box.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Now remove the power cord of the GT King and with the help of a pin, press and hold the reset button at the bottom and insert the power cord.
6. Hold the reset button for 5 seconds till you see the Beelink logo and then release it. Hopefully you be on the recovery screen.
7. From this screen, select “Apply update from EXT” and select the update zip file.
8. Now the box would update properly and boot you back.
I fixed it
I fixed it more than a month ago. Thanks anyway.
I thought xda was quick.
Hansell1001 said:
I fixed it more than a month ago. Thanks anyway.
I thought xda was quick.
Click to expand...
Click to collapse
Ha ha Yeah but i just got the box in Jan i screwed in March so i was looking for a solution but figured it out myself. So when i saw your post, i thought it would be helpful but guess not. But anyway now this would be helpful to someone who may need it.
So let this be a reference for them
Guys, help! I got a GTKing in November 2020, a couple of weeks ago. It worked for a week or so, then it went into boot loop. Firmware is v 914p0 (dated 21 Oct 2020). I tried several things to no avail:
- When reapplying v 914p0, the device reboots to the boot loop
- When attempting to apply v 913p0or earlier, it says it won't apply an earlier version.
I hope someone will drop in some hint on how to get this @#!* box to work.
Cheers,
-Christos
I can't download that firmware
Fordac
Hi i am newbie this forum i have an problem with an android gingerbread isn't booting and didn't vibrate show samsung logo or anything battery charging now show and when i connect to my windows it sounds device connected / disconnected and when on Device manager is "Unknown Device" It's one of seriously problems because maybe android plays with unmount system / partition 4025 MB or something from clockwork recovery now the system cannot be reinstalled , booting into recovery , download or anything and ODIN Didn't show ID / COM .Does this think happened to you press the button / plug in charger and nothing happened .I Also installed Android ADB Driver upon adb devices command it display error no device found I Try to find a way to repair myself without to take the old device to an repair shop to replace the android piece memory that i don't know where is located.If is an way to fix that i will say thanks.Sorry for bad post but my phone didn't do anything it have problems.What i will do , no one of the youtube tutorials helped much.It does not boot loop anything like a blank screen not flash nothing happened. It does not have bootloader / fastboot / recovery / download mode anyone it's very bricked i cannot undo anything.
Thanks for reading this threat
Bump for help
Sorry if i bump so i need help with this device GT-S5300 for 5 years i must take tomorrow to repair service device so i have 2 pictures of my device that cannot boot into recovery and download mode. :crying:
What i will say not booting into recovery and download and boot is dead without os it cannot vibrate the android and show samsung logo
Here is pictures of android and proof not booting a lot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This device must be fixed with all costs so i am Romanian maybe chance to survive or fix is 10
Tommorow i will take it to repair and i explain the situation maybe i replace the motherboard aswell with gingerbread os 2.3.6 I Hope there is a chance to repair so good luck to me
Fixed GT-S5300 Unbricked motherboard
I have good news my motherboard has been changed and had an low price so the repair was successfully
My samsung have the last chance i guess so must avoid forced upgrades and force format because maybe bricking again so i root an flash zip and worked and partition fine
Now that problem has been resolved i must ask someone to end this topic :good:
Carefull gingerbread i warned myself :fingers-crossed::victory:
When I was at Junior High in 9th grade I broke my Samsung GT-S5300 due to improperly install of incorrect custom rom (lollipop) to my phone that's why the device can't read my sd card even the gallery is empty. I broke it on last 2017. And now 2022 I tried to repair it via odin because our school allow us to borrow a laptop (which is I don't have) then repair my phone there and boom! I got my Samsung GT-S5300 back again to normal. It's now 5 years old. I love that phone because it's so hard to break it. I remember I throw my phone and then it's still alive. Until now it's still alive (but the home key don't work) but I can still use it. My favorite phone is this samsung gt-s5300. I'm planning to buy the same phone like this but I can't find it in the market (because it's phased out or not available). By christmas I will buy Samsung GT-S5360 (even if I have much money I don't like luxurious phones).
Hi,
I have a big problem.
My brother tried to root my Xtrons Px6 rk3399 gs. with Su user. He updated superuser. Now the radio is in the boot loop and it won't start. He then tried a new firmware to bottles which does not work either, the radio only shows the logo. I get into recovery. I just do not know how to go on:-(
it's the Xtrons PQ80UNV
Sorry for my english.
Greez
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TF? Why would you want to root that?
Did you try factory resetting?
He said it would be better. then you have more options. Because of some sound patch, I don't know much about it. Factory reset? I pressed Restet button but no change. It doesn't just start the boot logo from Vw.
I don't even get to the Adroid. Only in recovery.
Did a wipe, but it still doesn't start.
You chose wipe cache partition. I meant "Wipe data/factory reset"
Try choosing it.
If your brother is the one who did this as you say, if it's me I'd force him to fix it or at least pay for it.
I tried that too. I also tried the original firmware here, but always the same.
Yandex
Finds everything
yadi.sk
Yes, that's right, he's currently doing assembly work. I'm really desperate :-(
What I noticed is that with every firmware I install it is always the same recovery version.
voxdie said:
What I noticed is that with every firmware I install it is always the same recovery version.
Click to expand...
Click to collapse
Can I ask how did you root it?
Unfortunately, I don't know. I only know that an rk3399 mcu was previously a gs version
voxdie said:
Unfortunately, I don't know. I only know that an rk3399 mcu was previously a gs version
Click to expand...
Click to collapse
I don't believe you can root a device and suddenly you forget about it...
Do you have unlocked bootloader? You may need to flash the stock ROM if you can find it.
It works again, I have now flashed the img instead of the ota. Now it works again. Great. Thank you so much for your help
voxdie said:
It works again, I have now flashed the img instead of the ota. Now it works again. Great. Thank you so much for your help
Click to expand...
Click to collapse
I don't think I did anything but happy to see everything work out fine.
Make sure your brother doesn't do something like that again.
NO, he can't get to this radio anymore .. thanks again
the UNIT you have, looks almost the same as ICE/HU/PBX89UNV ( except mine has android 9 ) XTRONS ? 64GB -4GB ?
correction- there are multiple versions of this exact same unit. (even one with a qualcomn)
yours has the HDMI out pigtail ?
firmware link -
word instruction -
codes to ENABLE DEVELOPER OPTIONS
To start debugging, enter adbon in the factory settings input password box
if you want to change the factory settings, boot image, etc,, enter 126 in the factory settings input password box.
may i ask fellow members , to root this ,
unlock boot-loader,
flash updated BOOT.img (magisk patched)
-- because this is android 9, do i need a BLANK VBMETA flash?
funny fact--- this unit, will BOOTLOOP if you put a 512GB micro SD card in the slot, it boot loop cycles..
(anything above 128GB causes issues )
the micro SD slot for MAP/GPS , --- can we use this for anything else ?
and does anyone know of there are any custom roms and or TWRP already built for this > (this should share similar/same across a few brands ?)