SO I accident-ly Format everything and lost my OS now I dont know what to do I've been searching everywhere there's a post that show how to adb slideload, but then my ADB it's daemon still not runningerror: cannot connect to daemon Issue...
Then I tried to install stock rom via fastboot But it wouldnt work and I used " fastboot oem lock" now it said relock* on top of my fastboot what to do I'm so lost.
tientran818 said:
SO I accident-ly Format everything and lost my OS now I dont know what to do I've been searching everywhere there's a post that show how to adb slideload, but then my ADB it's daemon still not runningerror: cannot connect to daemon Issue...
Then I tried to install stock rom via fastboot But it wouldnt work and I used " fastboot oem lock" now it said relock* on top of my fastboot what to do I'm so lost.
Click to expand...
Click to collapse
I have the same problem, have you solved this!?
koysis said:
I have the same problem, have you solved this!?
Click to expand...
Click to collapse
If you didn't update to kit kat you can use RUU after you relock your bootloader.
Or you can figure out how to push a rom by ADB.
btort1 said:
If you didn't update to kit kat you can use RUU after you relock your bootloader.
Or you can figure out how to push a rom by ADB.
Click to expand...
Click to collapse
I have the same problem, but i did update to kiktkat 4.4 :crying: What can i do? Is the only way to wait for RUU 4.4?
denver_man said:
I have the same problem, but i did update to kiktkat 4.4 :crying: What can i do? Is the only way to wait for RUU 4.4?
Click to expand...
Click to collapse
I'm not entirely sure about any of these suggestions but I'm 100% you have to send a rom through ADB. but I THINK I seen one at the AT&T side of the forum (just seen a thread titled 4.4.2 ruu)
I was in the same exact situation as you, I paid some guy $20 to send a rom through ABD because I was impatient for my otg usb cable to come in
You can order one of these "USB 2.0 A Female to Micro B Male Converter OTG" for just a few $ on ebay if you want, this is how I install all my roms now
btort1 said:
I'm not entirely sure about any of these suggestions but I'm 100% you have to send a rom through ADB. but I THINK I seen one at the AT&T side of the forum (just seen a thread titled 4.4.2 ruu)
I was in the same exact situation as you, I paid some guy $20 to send a rom through ABD because I was impatient for my otg usb cable to come in
You can order one of these "USB 2.0 A Female to Micro B Male Converter OTG" for just a few $ on ebay if you want, this is how I install all my roms now
Click to expand...
Click to collapse
Thank you for reply to me. I actually have OTG cable and I used it to try to instal ota 4.4 through stock recovery but it didn't work. TWRP recovery doesn't see new flash device.
P.S. I guess the only one big problem that Im supernoob :laugh:
denver_man said:
Thank you for reply to me. I actually have OTG cable and I used it to try to instal ota 4.4 through stock recovery but it didn't work. TWRP recovery doesn't see new flash device.
P.S. I guess the only one big problem that Im supernoob :laugh:
Click to expand...
Click to collapse
if it doesn't see it, it's normally set to the INTERNAL at the bottom.
So if your on 2.7 or 2.6.3.3 just clock on the bottom and choose OTG instead of internal, hope this helps.
btort1 said:
if it doesn't see it, it's normally set to the INTERNAL at the bottom.
So if your on 2.7 or 2.6.3.3 just clock on the bottom and choose OTG instead of internal, hope this helps.
Click to expand...
Click to collapse
Ok, here is my mistake: I was trying to do all this things with oldest version of twrp, then I installed twrp 2.6.3.3 recovery and I was able to flash any custom rom by OTG cable. In my case it was ViperOne 5.8.0 and works fine for me. :victory:
I appreciate your help and thanks for your time! :good:
denver_man said:
Ok, here is my mistake: I was trying to do all this things with oldest version of twrp, then I installed twrp 2.6.3.3 recovery and I was able to flash any custom rom by OTG cable. In my case it was ViperOne 5.8.0 and works fine for me. :victory:
I appreciate your help and thanks for your time! :good:
Click to expand...
Click to collapse
Np, man I spent hours on it and gave up and paid someone to do it for me lol. i know exactly how you feel
Related
I NEED SOME HELP
I was loading Cyangenmod to my HTC ONE and accidentally deleted my backup. Now it's saying there's no OS found and I can't load one from my computer. Please help me!
joshevans5579 said:
I NEED SOME HELP
I was loading Cyangenmod to my HTC ONE and accidentally deleted my backup. Now it's saying there's no OS found and I can't load one from my computer. Please help me!
Click to expand...
Click to collapse
PS I've tried downloading the ALL IN ONE TOOLKIT and sideloading a rom it asks if the device is in recovery, it is TWRP recovery, but then says error device not found.
Please any help would be much appreciated.
joshevans5579 said:
I NEED SOME HELP
I was loading Cyangenmod to my HTC ONE and accidentally deleted my backup. Now it's saying there's no OS found and I can't load one from my computer. Please help me!
Click to expand...
Click to collapse
can you adb into the phone from your PC ?
you can try to push a rom to /data/media
boot to recovery wait about 10 seconds and the open cmd on you pc and run adb
adb push Rom.zip /data/media
wait for it to copy (it takes a while)
reboot phone back to recovery
your rom.zip should be on the phone now
Flash
your home free
Does twrp run? You should still be able to install the Rom as long as your recovery program still works.
Sent from my HTC One using xda app-developers app
joshevans5579 said:
PS I've tried downloading the ALL IN ONE TOOLKIT and sideloading a rom it asks if the device is in recovery, it is TWRP recovery, but then says error device not found.
Please any help would be much appreciated.
Click to expand...
Click to collapse
do you still have the fastboot folder on your PC ? do the adb push from their
first put the rom.zip in c:\fastboot
---------- Post added at 01:28 AM ---------- Previous post was at 01:25 AM ----------
mrstromboli said:
Does twrp run? You should still be able to install the Rom as long as your recovery program still works.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
twrp is messed up he most likely formatted the system and the /sdcard (rom) it happens all the time
Yea I did the same thing the first time I rooted my one X lol I was scared my phone was ruined! To the OP relax your phone will be alright just follow instructions better in the future.
Sent from my HTC One using xda app-developers app
Here is the instructions i posted that got another guy up and running hope it helps you out
This worked in CWM anyway
Boot into recovery
from the pc (c:\fastboot) do the adb push filename.zip /data/media
wait for it to copy
then on the phone reboot recovery your rom should be in the root of the sdcard waiting for you to flash
I just tested it and it worked perfect ( of coarse I didn't format my sdcard so ymmv )
clsA said:
Here is the instructions i posted that got another guy up and running hope it helps you out
This worked in CWM anyway
Boot into recovery
from the pc (c:\fastboot) do the adb push filename.zip /data/media
wait for it to copy
then on the phone reboot recovery your rom should be in the root of the sdcard waiting for you to flash
I just tested it and it worked perfect ( of coarse I didn't format my sdcard so ymmv )
Click to expand...
Click to collapse
Ok first, thank you for taking the time to help me with this.
I am a little bit of a noob when it comes to this stuff. I know just enough to get into trouble apparently. lol
I have my phone plugged in and have adb up, and am in fastboot. It doesn't seem to recognize my phone. I type adb devices, it just says list of devices and doesn't list any.
It won't let me push anything to my phone. I'm probably doing something wrong.
joshevans5579 said:
Ok first, thank you for taking the time to help me with this.
I am a little bit of a noob when it comes to this stuff. I know just enough to get into trouble apparently. lol
I have my phone plugged in and have adb up, and am in fastboot. It doesn't seem to recognize my phone. I type adb devices, it just says list of devices and doesn't list any.
It won't let me push anything to my phone. I'm probably doing something wrong.
Click to expand...
Click to collapse
I tried adb push myROM.zip /data/media
it says error no device found.
joshevans5579 said:
I tried adb push myROM.zip /data/media
it says error no device found.
Click to expand...
Click to collapse
I got it!!!!! Thanks! I just wiped it again couldn't hurt anything. It recognized it this time! Again Thank you for your help I really appreciate it.
joshevans5579 said:
I got it!!!!! Thanks! I just wiped it again couldn't hurt anything. It recognized it this time! Again Thank you for your help I really appreciate it.
Click to expand...
Click to collapse
Very good !! Glad it turned out well for you.
Lost!
clsA said:
Here is the instructions i posted that got another guy up and running hope it helps you out
This worked in CWM anyway
Boot into recovery
from the pc (c:\fastboot) do the adb push filename.zip /data/media
wait for it to copy
then on the phone reboot recovery your rom should be in the root of the sdcard waiting for you to flash
I just tested it and it worked perfect ( of coarse I didn't format my sdcard so ymmv )
Click to expand...
Click to collapse
I've tried all of this with no luck at all. Main version is 1.26.502.10...tried installing Nandroid backups that other posted and keep getting an error when extracting the zip. I've adb pushed ROMs to the sdcard multiple times. They load for installation, everthing seems to work, but once I reboot, it hangs on the HTC screen.
I too deleted the system files so I can't get back in the phone. Tried CWM and TWRP and tried over and over to get it to work with no luck.
Tried installing CleanROM, Stock, and one other...no dice.
Any ideas? I've been at this for two days now.
download the 1.26.12 RUU that designgears posted in general
boot to bootloader
fastboot oem lock
install RUU to start fresh
gunnyman said:
download the 1.26.12 RUU that designgears posted in general
boot to bootloader
fastboot oem lock
install RUU to start fresh
Click to expand...
Click to collapse
Yes good advice
Sent from my HTC One using xda premium
gunnyman said:
download the 1.26.12 RUU that designgears posted in general
boot to bootloader
fastboot oem lock
install RUU to start fresh
Click to expand...
Click to collapse
Tried that but my version is 1.26.502.10 and that one is .12
It wouldn't work because of that.
metaluna21 said:
Tried that but my version is 1.26.502.10 and that one is .12
It wouldn't work because of that.
Click to expand...
Click to collapse
yes it would.
it works just fine
you have to lock your bootloader first is all.
the RUU is an unreleased leak, but yes it will install as long as your CID is CWS_001. An AT&T device.
joshevans5579 said:
I NEED SOME HELP
I was loading Cyangenmod to my HTC ONE and accidentally deleted my backup. Now it's saying there's no OS found and I can't load one from my computer. Please help me!
Click to expand...
Click to collapse
I did the same thing i used a usb otg cable (http://www.amazon.com/gp/product/B005QX7KYU/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1) I put a rom on a flash drive and mounted it in my recovery and problem solved os installed on phone and working fine.
gunnyman said:
yes it would.
it works just fine
you have to lock your bootloader first is all.
the RUU is an unreleased leak, but yes it will install as long as your CID is CWS_001. An AT&T device.
Click to expand...
Click to collapse
I get Error 132 signature every time I try to do the RUU
Which phone do you have?
gunnyman said:
Which phone do you have?
Click to expand...
Click to collapse
AT&T 32g HTC One
So I made the terrible mistake of wiping my data / system partitions and internal SD without putting a ROM on the phone. I was trying to revert the phone to a stock build via the RUU utility (I need to flash the phone to another carrier and I can't do that without the stock phone app) but it failed so now I'm just stuck with a phone with nothing to boot into. I tried to run the RUU again but it freezes my whole computer after clicking "Upgrade" (there's some serious disk activity going on but nothing happens, unlike the first time when it proceeded after that.
I can't mount the internal SD on my computer as Windows 7 won't recognize it (a new disk shows up but I can't go into it). I've tried to use ADB sideload in TWRP but my computer hangs when I issue the command and I have to hard reset it. Trying to flash the zip via fastboot also requires a hard reset.
I am moonshine S-Offed and I'm using the latest TWRP recovery. I am pretty sure I have all the drivers installed (HTC Sync is installed and I also updated them with the drivers from PDaNet). Help?! I just want to get it back up and running, I'm just going to flash a non-RUU stock rooted ROM.
J D A said:
I am moonshine S-Offed and I'm using the latest TWRP recovery. I am pretty sure I have all the drivers installed (HTC Sync is installed and I also updated them with the drivers from PDaNet). Help?! I just want to get it back up and running, I'm just going to flash a non-RUU stock rooted ROM.
Click to expand...
Click to collapse
If you have a recovery you can just use a USB OTG cable, a thumbdrive with your rom images on it and install a rom from external SD.
twelfth said:
If you have a recovery you can just use a USB OTG cable, a thumbdrive with your rom images on it and install a rom from external SD.
Click to expand...
Click to collapse
I don't have one. Is there any other way?
J D A said:
I don't have one. Is there any other way?
Click to expand...
Click to collapse
Not really. USB OTG cables are $3 on eBay. Buy one.
Thanks for your help! I actually got it working jut now after a full day and night of frustration haha. I used this thread: http://forum.xda-developers.com/showthread.php?t=2060858. I thought I couldn't issue adb push but I was wrong! Everything works now!
J D A said:
Thanks for your help! I actually got it working jut now after a full day and night of frustration haha. I used this thread: http://forum.xda-developers.com/showthread.php?t=2060858. I thought I couldn't issue adb push but I was wrong! Everything works now!
Click to expand...
Click to collapse
You got lucky. The way it sounded in your original post was that even ADB was broken. By that point, if you have a working recovery, the only thing you CAN do is flash an image... and without an SDCard to pull out of the phone, you can only do it through USB OTG on the DNA.
So I'd still pick up a USB OTG cable in case you need it in the future.
twelfth said:
You got lucky. The way it sounded in your original post was that even ADB was broken. By that point, if you have a working recovery, the only thing you CAN do is flash an image... and without an SDCard to pull out of the phone, you can only do it through USB OTG on the DNA.
So I'd still pick up a USB OTG cable in case you need it in the future.
Click to expand...
Click to collapse
I know. Way too lucky. ADB has always been a pain for me, even with my Rezound. I will definitely be buying an OTG cable or that OTG-like sd card plugin asap!
boot into recovery and push the file to the /sdcard
no need to mount anything just make sure it says adb device: **device_id##**
when you have twrp booted and plug it in to your pc it will act as if the system is already mounted if you type adb shell it will bring up the shell of the phones storage then exit and just adb push rom.zip /sdcard/rom.zip and its there...
You can use this tool kit to help you out. I have used it and its very simple. The creator did a wonderful job with it. Best of luck to you!
http://forum.xda-developers.com/showthread.php?t=2219175&highlight=toolkit
Good evening Ladies & Gents.
Firstly can I say, this site has been my bible, and I am so very very grateful for all the work that everyone has put in to making this site what it is.
Now down to business.
I have an HOX+ and have been flashing for about a year now but still consider myself to be a complete nub! first with hox then i broke it and now hox+. Im in a bit of a predicament.
I flashed a version of aosp 4.4 onto the phone, installed from the zip file, cleared the cache, user data and dalvik.
rebooted, and got stuck in a boot loop.
So i went to my backup and restored from there...
boot loop again.
So i went back into bootloader, then fastboot, and reflashed the viper+ 2.0.1 that I had on before.
But when I got stuck on sending boot
Now im stuck in a boot loop, none of my backups will restore properly.
I fear I am hardbricked as I cant get anything to work...
Any help before I have to be back at work tomorrow would be very helpful! and even more appreciated!
Yours
A very frustrated and stressed British nub
Sorry, also, I have checked through xda and I cant seem to find anything that would explain why I am stuck!
flash the boot.img
from a welsh person who can't understand why people cannot flash rom's correctly
Fastboot
Lloir said:
flash the boot.img
from a welsh person who can't understand why people cannot flash rom's correctly
Click to expand...
Click to collapse
I used "fastboot flash boot boot.img" in my cmd, like i always have done, and this time it doesn't want to work...at all
ryutnm said:
I used "fastboot flash boot boot.img" in my cmd, like i always have done, and this time it doesn't want to work...at all
Click to expand...
Click to collapse
you tried fulling wiping? then just flashing the rom + bootimage after
thanks
Lloir said:
you tried fulling wiping? then just flashing the rom + bootimage after
Click to expand...
Click to collapse
No, does that require different fastboot commands?
i have cwm touch recovery installed. Would that make a difference?
Also, could I just say thank you in advance for your help sir!
ryutnm said:
No, does that require different fastboot commands?
i have cwm touch recovery installed. Would that make a difference?
Also, could I just say thank you in advance for your help sir!
Click to expand...
Click to collapse
Unless you mean the user data and cache wipe.
Then yeah i did that
ryutnm said:
Unless you mean the user data and cache wipe.
Then yeah i did that
Click to expand...
Click to collapse
Data/system/cache
Sent from my Nexus 5 using Tapatalk
ryutnm said:
Good evening Ladies & Gents.
Firstly can I say, this site has been my bible, and I am so very very grateful for all the work that everyone has put in to making this site what it is.
Now down to business.
I have an HOX+ and have been flashing for about a year now but still consider myself to be a complete nub! first with hox then i broke it and now hox+. Im in a bit of a predicament.
I flashed a version of aosp 4.4 onto the phone, installed from the zip file, cleared the cache, user data and dalvik.
rebooted, and got stuck in a boot loop.
So i went to my backup and restored from there...
boot loop again.
So i went back into bootloader, then fastboot, and reflashed the viper+ 2.0.1 that I had on before.
But when I got stuck on sending boot
Now im stuck in a boot loop, none of my backups will restore properly.
I fear I am hardbricked as I cant get anything to work...
Any help before I have to be back at work tomorrow would be very helpful! and even more appreciated!
Yours
A very frustrated and stressed British nub
Click to expand...
Click to collapse
Well the bootlooping has something to do with not flashing the boot.img stated by yourself and lloir. About that bug of "Sending boot.img", it happens to me but I fix it by running CMD as administrator , If that doesnt work, try using a different usb port. Preferably one directly to pc/laptop rather than using a hub. Try a 3.0usb port first, if that doesnt work then 2.0usb port.
P.S Without S-Off you can't become hardbricked. Till now I didn't see a single person who bricked their HOX+ unless he received an S-Off developer phone..
Lloir said:
Data/system/cache
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Im now only getting "waiting for device"
which I can only assume means my pc now doesnt even recognise the phone when its booted in bootloader/fastboot usb mode?
ryutnm said:
Im now only getting "waiting for device"
which I can only assume means my pc now doesnt even recognise the phone when its booted in bootloader/fastboot usb mode?
Click to expand...
Click to collapse
stop....Hammer time...
have you got a rom on the sdcard (in cwm) if yes
wipe data/system/cache
then
reboot into bootloader
fastboot flash boot boot.img
if not ----------
full wipe (as above)
adb sideload romname.zip
then reboot into bootloader as above
Lloir said:
stop....Hammer time...
have you got a rom on the sdcard (in cwm) if yes
wipe data/system/cache
then
reboot into bootloader
fastboot flash boot boot.img
if not ----------
full wipe (as above)
adb sideload romname.zip
then reboot into bootloader as above
Click to expand...
Click to collapse
I have the zip on the internal storage as i dont have "sd/ext" or what ever the extention is. When I bought the phone I never had the sd card. Never was able to save anything onto an sd card.
so should i try installing from the zip? even though the fastboot commands arent working?
or would a sideload skip the fastboot commands?
or am i just being completely retarded
Edt - just tried the sideload using the cmd, and i had error: device not found
so windows isnt recognising my phone...it was working this morning
ryutnm said:
I have the zip on the internal storage as i dont have "sd/ext" or what ever the extention is. When I bought the phone I never had the sd card. Never was able to save anything onto an sd card.
so should i try installing from the zip? even though the fastboot commands arent working?
or would a sideload skip the fastboot commands?
or am i just being completely retarded
Click to expand...
Click to collapse
Why am i being ignored you guys lol. Did you try my solution ?
Terribly Sorry
Ghand0ur said:
Why am i being ignored you guys lol. Did you try my solution ?
Click to expand...
Click to collapse
dude, im so sorry - i didnt even see the post!
i will try now!
sorry again
edt - still no joy as for some reason my phone is no longer being recognised by my pc =[
HTC sync uninstalled ?
you have killed adb (if on windows just kick open taskman and kill adb)
or in cmd\terminal adb kill-server
then do adb devices
reboot pc?
try a different usb cable (maybe the one from your charger if you are not using that one)
*edit the above is assuming you are in recovery
IF NOT in recovery, but fastboot_usb mode
then fastboot devices (but you cannot do jack apart from flash boot image)
IF in recovery, you got a few choices
wait 5-10minutes (don't ask, it's a common issue with the X+ and CWM\TWRP)
put the device in adb sideload for a minute or so (^ see above reason)
i have adb issues in CWM\TWRP myself, especially when i have no rom and so on, so i know your frustration, patience young padwan
looking good so far
Ghand0ur said:
Why am i being ignored you guys lol. Did you try my solution ?
Click to expand...
Click to collapse
Lloir said:
HTC sync uninstalled ?
you have killed adb (if on windows just kick open taskman and kill adb)
or in cmd\terminal adb kill-server
then do adb devices
reboot pc?
try a different usb cable (maybe the one from your charger if you are not using that one)
Click to expand...
Click to collapse
So I tried starting cmd in administrator mode [never had to before]
- Didnt work
- Plugged into a different usb slot as lloir suggested, didnt get the "windows does not recognise this device" this time
restarted cmd as admin like Ghandour suggested.
Just managed to install the viperx+ 2.0.1 rom and i am now setting it up!
THANK YOU SO FREAKING MUCH GUYS [and gals if either of you are female]!
do you know why I had to start using cmd as an administrator?
ryutnm said:
So I tried starting cmd in administrator mode [never had to before]
- Didnt work
- Plugged into a different usb slot as lloir suggested, didnt get the "windows does not recognise this device" this time
restarted cmd as admin like Ghandour suggested.
Just managed to install the viperx+ 2.0.1 rom and i am now setting it up!
THANK YOU SO FREAKING MUCH GUYS [and gals if either of you are female]!
do you know why I had to start using cmd as an administrator?
Click to expand...
Click to collapse
might be because of where you have the adb tools. and i'am 100% male
thanks
Lloir said:
might be because of where you have the adb tools. and i'am 100% male
Click to expand...
Click to collapse
well dude, thank you for your help!
I dont understand why though, ive been using this pc the whole time to flash recovery images and boot images and never had to use admin
Thank you
Also a thank you to Ghand0ur for your help as well!
So very much appreciated
ryutnm said:
Also a thank you to Ghand0ur for your help as well!
So very much appreciated
Click to expand...
Click to collapse
Glad you got it working. Just always try those common solutions:
-Restart PC
-Run as admin
-unplug replug
-reboot phone
-try different usb port
-try different usb cable.
i accidentally wiped everything via TWRP and now i am stuck in recovery with no os and no way to put a ROM on. I don't know if there is a wireless adb feature in recovery but i have had no luck (plenty of Googleing ) i at at my wits end at this point, any help would be greatly appreciated
wildestweasal said:
i accidentally wiped everything via TWRP and now i am stuck in recovery with no os and no way to put a ROM on. I don't know if there is a wireless adb feature in recovery but i have had no luck (plenty of Googleing ) i at at my wits end at this point, any help would be greatly appreciated
Click to expand...
Click to collapse
The first thing we need to know is what OS is on the PC so you can get the right drivers. Do you have the SDK set up and workiing?
wildestweasal said:
i accidentally wiped everything via TWRP and now i am stuck in recovery with no os and no way to put a ROM on. I don't know if there is a wireless adb feature in recovery but i have had no luck (plenty of Googleing ) i at at my wits end at this point, any help would be greatly appreciated
Click to expand...
Click to collapse
The experimental twrp doesn't work for me for adb. If that's what you're running, you can try rebooting to the bootloader and flashing the last official twrp to see if that works.
crpalmer said:
The experimental twrp doesn't work for me for adb. If that's what you're running, you can try rebooting to the bootloader and flashing the last official twrp to see if that works.[/QUO
idk its the 2.6.3 version. But fastboot doesnt even respond i think my usb port when out but i ordered a replacement though got tired of messing with it thanks though
Click to expand...
Click to collapse
wildestweasal said:
crpalmer said:
The experimental twrp doesn't work for me for adb. If that's what you're running, you can try rebooting to the bootloader and flashing the last official twrp to see if that works.[/QUO
idk its the 2.6.3 version. But fastboot doesnt even respond i think my usb port when out but i ordered a replacement though got tired of messing with it thanks though
Click to expand...
Click to collapse
I am running same version, no issues. can your PC see the unit? Does the PC respond when the unit is connected when the Android system is booted up?
Click to expand...
Click to collapse
wildestweasal said:
i accidentally wiped everything via TWRP and now i am stuck in recovery with no os and no way to put a ROM on. I don't know if there is a wireless adb feature in recovery but i have had no luck (plenty of Googleing ) i at at my wits end at this point, any help would be greatly appreciated
Click to expand...
Click to collapse
If your not on Windows 7 your going to need it.
I am running same version, no issues. can your PC see the unit? Does the PC respond when the unit is connected when the Android system is booted up?[/QUOTE]
............no it has no (OS)
wildestweasal said:
I am running same version, no issues. can your PC see the unit? Does the PC respond when the unit is connected when the Android system is booted up?
Click to expand...
Click to collapse
............no it has no (OS)[/QUOTE]
Does the PC respond when in fastboot? What OS is on the PC?
i have the same issue and my computer dosent respond when in fastboot or adb i have no os and im twrp 2.5 can anyone help...
demon28 said:
i have the same issue and my computer dosent respond when in fastboot or adb i have no os and im twrp 2.5 can anyone help...
Click to expand...
Click to collapse
Download pdanet it will re download adb
Sent from my HTC6435LVW using XDA Premium 4 mobile app
I accidentally (and stupidly) wiped my OS on my DNA. I'm stuck in a bootloop and when I type adb devices it says:
List of devices attached:
(blank)
However, when I am in fastboot and type fastboot devices, it says the serial number of my phone.
Does anyone know of any way for me to get an operating system back installed? I have access to TWRP v2.6.3.0.
I scoured XDA for the past 4 hours looking for anything resembling my situation and found nothing. I tried different approaches that were listed that somewhat fit my situation, but to no avail.
Anyone? Please? I'm pretty literate when it comes to these phones, I just haven't ever come across stupidly wiping everything on my phone, including the OS.
It just freezes at the HTC screen and I don't know how to flash any ROM (or anything at this point) using fastboot.
bhinderoid said:
I accidentally (and stupidly) wiped my OS on my DNA. I'm stuck in a bootloop and when I type adb devices it says:
List of devices attached:
(blank)
However, when I am in fastboot and type fastboot devices, it says the serial number of my phone.
Does anyone know of any way for me to get an operating system back installed? I have access to TWRP v2.6.3.0.
I scoured XDA for the past 4 hours looking for anything resembling my situation and found nothing. I tried different approaches that were listed that somewhat fit my situation, but to no avail.
Click to expand...
Click to collapse
Do you have adb access in recovery? If not, try to download a .IMG file for the latest twrp and flash that with fastboot and then try again to get adb in recovery.
crpalmer said:
Do you have adb access in recovery? If not, try to download a .IMG file for the latest twrp and flash that with fastboot and then try again to get adb in recovery.
Click to expand...
Click to collapse
I had the latest TWRP and it wasn't working. I then switched to CWM (via fastboot flash) and it still wouldn't recognize.
I previously had the ViperDNA rom installed and I think once everything was wiped (OS included), my computer no longer recognized my cellphone.
Is there any other way to recover my device / OS? Possibly only using fastboot?
bhinderoid said:
I had the latest TWRP and it wasn't working. I then switched to CWM (via fastboot flash) and it still wouldn't recognize.
I previously had the ViperDNA rom installed and I think once everything was wiped (OS included), my computer no longer recognized my cellphone.
Is there any other way to recover my device / OS? Possibly only using fastboot?
Click to expand...
Click to collapse
Do you have a USB otg cable and a thumb drive? That's another easy way to get a ROM into recovery. If not, the next easiest thing (other than going and buying one or finding someone that you can borrow one from) would be to find a guide to ruu back to stock (make sure you do not screw up locking the bootloader!) and then start over with rooting / unlocking.
crpalmer said:
Do you have a USB otg cable and a thumb drive? That's another easy way to get a ROM into recovery. If not, the next easiest thing (other than going and buying one or finding someone that you can borrow one from) would be to find a guide to ruu back to stock (make sure you do not screw up locking the bootloader!) and then start over with rooting / unlocking.
Click to expand...
Click to collapse
I do have a thumbdrive but not a USB otg cable (I can go buy one)
So if I'm accessing it through twrp, is there a particular folder which will allow me access to the thumb drive?
Also, would I be good simply flashing a Rom.zip and have everything re-installed?
Thanks so much for your replies, I really REALLY appreciate it!
Also, I don't think my phone is USB Debugging activated, if I need to activate it is there a way to do it if everything on my phone has been wiped and I have no immediate access to activating the option?
bhinderoid said:
I do have a thumbdrive but not a USB otg cable (I can go buy one)
So if I'm accessing it through twrp, is there a particular folder which will allow me access to the thumb drive?
Also, would I be good simply flashing a Rom.zip and have everything re-installed?
Thanks so much for your replies, I really REALLY appreciate it!
Also, I don't think my phone is USB Debugging activated, if I need to activate it is there a way to do it if everything on my phone has been wiped and I have no immediate access to activating the option?
Click to expand...
Click to collapse
No problem.
I don't use twrp but I would imagine it is fairly obvious how to select the usb-otg drive. If not, try cwr. I know that used to work and was fairly obvious (but I forget the exact details).
There isn't any way to enable USB debugging in recovery but flashing a working ROM should get you back in business.
crpalmer said:
No problem.
I don't use twrp but I would imagine it is fairly obvious how to select the usb-otg drive. If not, try cwr. I know that used to work and was fairly obvious (but I forget the exact details).
There isn't any way to enable USB debugging in recovery but flashing a working ROM should get you back in business.
Click to expand...
Click to collapse
So I don't need USB debugging activated in order to flash a rom from a USB otg drive, correct?
Thanks again bud, you've talked me off the ledge.
bhinderoid said:
So I don't need USB debugging activated in order to flash a rom from a USB otg drive, correct?
Thanks again bud, you've talked me off the ledge.
Click to expand...
Click to collapse
You shouldn't. Usb storage is just storage.
crpalmer said:
You shouldn't. Usb storage is just storage.
Click to expand...
Click to collapse
The USB OTG is a GODSEND.
As are you, crpalmer, thank you so much for all the help!!
bhinderoid, did you fix it? Another option is ADB sideload. I've been in the same position as you and it is awful.
here is another thread that mentions the steps and issues.
http://forum.xda-developers.com/showthread.php?p=46752829#post46752829