Related
i brick 2 samsung s2 i9100 now help
i have jig but i can't go in downloading mode help
If it was a normal software update with a firmware that was not rooted and you still have warranty left, you should bring the phone to the shop where you bought it. They will fix it.
Reply
Did you try a battery pull then turn on your phone and immediately hold the 3 (button combo vol up + home + power)? Also what caused this problem?
not work
Ryan00101101 said:
Did you try a battery pull then turn on your phone and immediately hold the 3 (button combo vol up + home + power)? Also what caused this problem?
Click to expand...
Click to collapse
not work thanks for quick reply
If Odin recognizes your phone, you should be able to flash from that Phone - /!\ - PC screen.
it there any forum already exist plz tell me
very bad position now two set are brick guys help me out
faizan_950 said:
it there any forum already exist plz tell me
very bad position now two set are brick guys help me out
Click to expand...
Click to collapse
Read my post above yours. Just treat the Phone - /!\ - PC screen like download mode.
ctomgee said:
If Odin recognizes your phone, you should be able to flash from that Phone - /!\ - PC screen.
Click to expand...
Click to collapse
thanks it work bro
now i able to install GT-I9100_ClockworkMod-Recovery_4.0.1.4...
but i am not able to access memory and not able to install boot loader...
faizan_950 said:
thanks it work bro
now i able to install GT-I9100_ClockworkMod-Recovery_4.0.1.4...
but i am not able to access memory and not able to install boot loader...
Click to expand...
Click to collapse
Are you sure you have I9100 phones, and not I9100G phones?
Check the label under your batteries.
I9100 firmwares and kernels do not work on I9100G, and vice versa.
faizan_950 said:
not work thanks for quick reply
Click to expand...
Click to collapse
Get into download mode and flash a stock firmware from www.sammobile.com. Make sure you have the i9100 and not I9100G model.
And make sure you know what you're doing before you do anything. It seems like you don't have a clue if you are missing up two phones.
Sent from my GT-P7510 using xda premium
Phone will not boot, full brick. Anyone know how to remove the internal memory chip from the board and know of a device that can read it?
How did you manage this? A bit of information might be useful.
Thanks.
taygutta said:
Phone will not boot, full brick. Anyone know how to remove the internal memory chip from the board and know of a device that can read it?
Click to expand...
Click to collapse
What you do? Details
Sent from my GT-I9300 using xda premium
mardos said:
What you do? Details
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Flashed the omega rom and it just killed my phone.
No download mode
no recovery.
Not even a charging led light.
taygutta said:
Phone will not boot, full brick. Anyone know how to remove the internal memory chip from the board and know of a device that can read it?
Click to expand...
Click to collapse
This might be helpful for taking the phone apart and working out what's what.
http://www.youtube.com/watch?v=eo93EF7rVIw
I would assume the chip would need some specialist equipment to read it though :/
Donate it to Adam outler for testing his unbrickable mod.
Bad luck dude.
Sent from my GT-I9300 using xda premium
Maybe its just dead and charging is broken? Worth trying an external charger or friends device to make sure, that really is bad luck I hope to get this phone but I wont be diving into roms until I'm sure this won't happen :/
Sent from the real world by hacking into the matrix
Have you tried a JIG to get to download mode?
taygutta said:
Flashed the omega rom and it just killed my phone.
Click to expand...
Click to collapse
Note + Don't blame the ROM, it is ALWAYS the USER, as it was your choice. Nobody made you try flash it!
Is your device a international I9300 or I9300T model?
What did you mean exactly "Phone will not boot", stuck at samsung logo? or phone just won't power on?
try usb jib for S3. you should be able to go to yellow download icon mode and then flash back the old stock rom again.
taygutta said:
Flashed the omega rom and it just killed my phone.
No download mode
no recovery.
Not even a charging led light.
Click to expand...
Click to collapse
bordikun said:
What did you mean exactly "Phone will not boot", stuck at samsung logo? or phone just won't power on?
Click to expand...
Click to collapse
READ post #3
yeahitsgotahemii said:
Have you tried a JIG to get to download mode?
Click to expand...
Click to collapse
I ordered a JIG that "said" it was for the s3 but didnt work.
doki81 said:
try usb jib for S3. you should be able to go to yellow download icon mode and then flash back the old stock rom again.
Click to expand...
Click to collapse
I did more research and found one that claims to be just for the S3 and I will try it. I hop it gets to me soon I just really want the data off the phone.
I have seen a lot of brick posts with the release of this phone, crazy stuff.
how ar you trying to get into download and recovery.......and SOMETIMES, download made wont even SHOW on the screen but its still in download mode.....have you tried putting it in download mode ( even though the screen is black) and see if Odin recognizes it??
Dude try using jigs usb ... it will put ur phone 2 download mode... thn do the further flashing.....
Sent from my GT-I9300 using xda app-developers app
Ph3rOn!xX said:
Dude try using jigs usb ... it will put ur phone 2 download mode... thn do the further flashing.....
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
if we would read more he has tried and is getting another to try it out.
but still i say try to get into download mode.....Volume down+home+power
even if the screen is black, still try and plug it up to Odin....it may recognize the Com.
the2rrell said:
how ar you trying to get into download and recovery.......and SOMETIMES, download made wont even SHOW on the screen but its still in download mode.....have you tried putting it in download mode ( even though the screen is black) and see if Odin recognizes it??
Click to expand...
Click to collapse
There was one time when I was able to get the LED on while plugged in to the PC, maybe that was it .I really hope that was it but Odin did not see it.
the2rrell said:
if we would read more he has tried and is getting another to try it out.
but still i say try to get into download mode.....Volume down+home+power
even if the screen is black, still try and plug it up to Odin....it may recognize the Com.
Click to expand...
Click to collapse
I have tried every download mode and recovery, nothing works. Im not even sure if its charging. Sprint said they would try to pull the memory chip out and try to recover some data... fingers crossed
Stuck on Samsung Screen
Hi guys please help me. My Samsung S3 is stuck on Samsung Screen. The phone talks to Odin3.
You flashed Omega on a Sprint phone? There's your problem, lol.
Hi,
I recently bought a gs2 however its not working, basically the guy who sold it to me was trying to upgrade it to latest software via xda apparently and now its blocked. it just flashes the screen, black screen, you can see the yellow triangle when i try to put it into recovery or download mode. i have done some research but cant get my head round it. it comes up on kies as pda:lpt/phone:lq6/csc:lpa(xeu) as current firmware version. i have tried using odin to re set it and flash it also however odin wont read it and wont come up yellow , i have removed and re set the drivers still not luck.
i am not very clued up on android as i used to use blackberry.
can anyone please help me on what to do and how to do it?
thank you
kuq-e-zi said:
... when i try to put it into recovery or download mode...
Click to expand...
Click to collapse
What do you me by "try"? Can you enter download mode or not?
fxrb said:
What do you me by "try"? Can you enter download mode or not?
Click to expand...
Click to collapse
He can, because he stated that he tried to reset it via odin...
@OP , take a look at the USB port where you charge the phone... Do you see something wrong with it?...
Sent with a homing pigeon
riro1612 said:
He can, because he stated that he tried to reset it via odin...
@OP , take a look at the USB port where you charge the phone... Do you see something wrong with it?...
Sent with a homing pigeon
Click to expand...
Click to collapse
the usb is ok, it charges the phone, connects to kies as well but not odin. i bought a usb jig as well. when i connect the jig it flashes "downloading" though it hard to see as its flashing non stop however nothing else happens.
kuq-e-zi said:
hard to see as its flashing non stop however nothing else happens.
Click to expand...
Click to collapse
You mean the screen keeps flickering?
Hello,
i have recentely rooted my phone i today i saw an app france kernel updater.I saw what kernel is and in the app i saw update kernel and i thought it would update my current kernel which is stock,and the phone wanted to reboot.After that it shows me galaxy s3 bla bla the usual thing and thats all.My buttons get bright and stays black.PLEASE HELP ME.I think i have to reboot it with stock rom but i am not sure if i can get in dowload mode because when i rooted my phone i get one red mark at the left upper part of the screen.please help me . Gt-i9300 is my phone :crying::crying::crying::crying::crying::crying::crying:
Boots to recovery ???
Boots to download mode ???
Nandroid backup ??
jje
it shows me black screen nothing else
Seleth said:
it shows me black screen nothing else
Click to expand...
Click to collapse
You need a service centre .
jje
what does this means?
Seleth said:
what does this means?
Click to expand...
Click to collapse
A service centre a place where they fix broken phones .Or at least tell you what is wrong and how much it will cost .
jje
JJEgan said:
A service centre a place where they fix broken phones .Or at least tell you what is wrong and how much it will cost .
jje
Click to expand...
Click to collapse
What will happen if i try to flash a stock rom
Can you get into download mode?
slaphead20 said:
Can you get into download mode?
Click to expand...
Click to collapse
yes
You just said it only boots to a black screen hence service centre advice .
Download mode flash stock rom via Odin .
jje
JJEgan said:
You just said it only boots to a black screen hence service centre advice .
Download mode flash stock rom via Odin .
jje
Click to expand...
Click to collapse
Would it be a problem if you provide me a link because i want to be secure that the file is the correct one?I am runnig 4.1.2
Seleth said:
Would it be a problem if you provide me a link because i want to be secure that the file is the correct one?I am runnig 4.1.2
Click to expand...
Click to collapse
I cant connect my phone with the pc .Help me:crying:
Seleth said:
I cant connect my phone with the pc .Help me:crying:
Click to expand...
Click to collapse
Have you got the drivers or kies installed?
slaphead20 said:
Have you got the drivers or kies installed?
Click to expand...
Click to collapse
I had kies and i think i have the drivers it gives me the eror Gadget Serial.The phone can stay only in Dowloading mode and nothing else.Cant find a way to fix this.Help me,somehow.I have just installed samsung pc studio didnt work.
Seleth said:
I had kies and i think i have the drivers it gives me the eror Gadget Serial.The phone can stay only in Dowloading mode and nothing else.Cant find a way to fix this.Help me,somehow.I have just installed samsung pc studio didnt work.
Click to expand...
Click to collapse
Try reinstalling drivers/kies.....Can you get into recovery? If you can and its cwm then might be worth trying to flash a kernel first and seeing if that gets it booting
slaphead20 said:
Try reinstalling drivers/kies.....Can you get into recovery? If you can and its cwm then might be worth trying to flash a kernel first and seeing if that gets it booting
Click to expand...
Click to collapse
actually i have never been in recovory,but i think i cant get in,however,how can i get in recovery mode?
Seleth said:
actually i have never been in recovory,but i think i cant get in,however,how can i get in recovery mode?
Click to expand...
Click to collapse
Shut down your device and boot while holding the volume up, home button and power button simultaneously.
Sent from my GT-I9300 using xda app-developers app
gawelx said:
Shut down your device and boot while holding the volume up, home button and power button simultaneously.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I have restarted my pc and somehow is connected now to odin.Now all i need is to find a stock rom.It would be good if someone can give me one for 4.1.2 i will be searching too.
Seleth said:
I have restarted my pc and somehow is connected now to odin.Now all i need is to find a stock rom.It would be good if someone can give me one for 4.1.2 i will be searching too.
Click to expand...
Click to collapse
What country are you in?
slaphead20 said:
What country are you in?
Click to expand...
Click to collapse
Bulgaria
Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
leocadenas said:
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
Click to expand...
Click to collapse
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Amogh Thambi said:
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Click to expand...
Click to collapse
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
gsstudios said:
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
Click to expand...
Click to collapse
Okay. Thanks a lot! I guess I have to change it's motherboard!
Amogh Thambi said:
Okay. Thanks a lot! I guess I have to change it's motherboard!
Click to expand...
Click to collapse
yep, that's one way to solve it.
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
leocadenas said:
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
Click to expand...
Click to collapse
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Amogh Thambi said:
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Click to expand...
Click to collapse
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
warrior1208 said:
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
Click to expand...
Click to collapse
When i flashed boot.img the battery was almost full.... After it failed to flash... I rebooted to see if everything was okay... But Boom! After i pressed reboot to recovery the phone turned off and died..... Also in the repair shop, we tried booting up with electric source but still no luck! First Weird and Bad experience with samsung
Amogh Thambi said:
Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Click to expand...
Click to collapse
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
jaysan2 said:
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
Click to expand...
Click to collapse
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Amogh Thambi said:
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Click to expand...
Click to collapse
hi, as i have seen your posts you have written that you do have tried jig, and no results. try to take out battery and connect the jig and put the battery, i believe this the last chance you might have through jig. Or just jtag it for 25$ it is not that expensive, let me know what happens with jig.