AniDroid-JB-N7000
Short ROM/Kernel information:
AniDroid-JB-N7000 is AOSP JellyBean ROM based on the latest CM10 source.
AniDroid-JB-N7000-Kernel is a kernel for AOSP JellyBean ROMs. It was built with the latest Linaro Toolchain (GCC 4.7.1)
Provided Features:
Linux Kernel version 3.0.15 (safe to use, without MMC_CAP_ERASE-related BUG)
Kernel built with the latest Linaro Toolchain (GCC 4.7.1)
CWM Recovery v6.0.1.3
SLQB Memory Allocator instead of default SLUB
CPU Overclocking (OC) support up to 1600 MHz
CPU Overvolting (OV) and Undervolting (UV) support for every frequency
GPU MAX Frequency changed to 250 MHz to save more battery
GPU Voltages are decreased to save more battery
NEW CPU Frequence Scaling Governors: PegasusQ, Adaptive, MinMax, SmartAssV2, InteractiveX, ConservativeX, LagFree, LulzactiveV2, Intellidemand, Scary, LionHeart, Wheatley, SavagedZen, BrazilianWax
CPU Voltage Control - Undervolting/Overvolting (UV/OV, use with NSTools App)
Automatic Process Group Scheduling
USB OTG support (please use with special USB Host OTG Cable)
EXT4, CIFS filesystems support
init.d support
2048 Kb ReadAhead
CPU Frequence Scaling Governors:
PegasusQ
Adaptive
Conservative
Userspace
Powersave
Ondemand
Performance
MinMax
SmartAssV2
InteractiveX
ConservativeX
LagFree
LulzactiveV2
Intellidemand
Scary
LionHeart
Wheatley
SavagedZen
BrazilianWax
IO Schedulers:
SIO
CFQ
Noop(Default)
Deadline
Installation instructions:
If you are coming from the previuos version of AniDroid-N7000:
Download ZIP file with the version of AniDroid-JB-N7000 and put it on Internal/External SD-card
Download ZIP file with Google Apps and put it on Internal/External SD-card
Boot into ClockworkMod Recovery
Choose "Install ZIP from SD-card/External SD-card"
Choose ZIP file AniDroid-JB-N7000 ROM you've just put on SD-card
Choose "Yes" to flash the ZIP
Flash ZIP file with Google Apps in the same way (you must do it after flashing every new version of AniDroid-N7000!!!)
If you are coming from another ROM:
Download ZIP file with the version of AniDroid-JB-N7000 and put it on Internal/External SD-card
Download ZIP file with Google Apps and put it on Internal/External SD-card
Boot into ClockworkMod Recovery
If you are on a leaked ICS kernel, please flash a known safe kernel from the sticky in the development section!!!
Do a Nandroid Backup to make full backup of your currently installed firmware
Choose "Wipe Data/Factory Reset" and choose "Yes" to do a full wipe
Choose "Install ZIP from SD-card/External SD-card"
Choose ZIP file with AniDroid-JB-N7000 ROM you've just put on SD-card
Choose "Yes" to flash the ZIP
Flash ZIP file with Google Apps in the same way (you must do it after flashing every new version of AniDroid-N7000!!!)
Changelog:AniDroid-JB-N7000 v0.1 - v0.2:
Initial version
AniDroid-JB-N7000 v0.2 - v0.3:
Fixed BUG with CPU Frequency Scaling Governors availability
AniDroid-JB-N7000 Kernel v0.3 - v0.4:
CPU Overclocking (OC) and Underclocling (UC) support from 100 MHz to 1600 MHz with 100 MHz step added
AniDroid-JB-N7000 Kernel v0.4 - v0.5:
CPU Overvolting and Undervolting FIX
AniDroid-JB-N7000 Kernel v0.5 - v0.6:
CPU UnderClock to 100 MHz temporarely removed
CPU voltage for 1600 MHz increased to improve stability
Support for Triangle Away enabled
KSM support enabled (Kernel Samepage Merging) to optimize memory usage
SIO I/O Scheduler support added
Download Links:
ROM Binaries (v0.5):
AniDroid-JB-N7000-v0.5_10092012.zip
AniDroid-JB-N7000-v0.5_10092012.md5
Kernel Binaries (v0.6):
AniDroid-JB-N7000-Kernel_v0.6_14092012_CWM_Flashable.zip
AniDroid-JB-N7000-Kernel_v0.6_14092012_CWM_Flashable.md5
Previous versions:
Previous versions binaries
Kernel Source Code:
AniDroid-JB-N7000-Kernel on GitHub
Google Apps:
GApps
Donators: Petr Malek, Chasmodo, Lucian1, Dtswk, Mfractal, Jolillo, Antonius0809, Christian Murmann
Great Thanks to CyanogenMod for the ROM and kernel base!!!
Thanks to eugene373, koush, ezekeel, supercurio, morfic, franciscofranco, sztupy, reddv1, byeonggonlee!!!
First one...!!! Amazing...!!! Great to see more awesome roms on JB....
Yes!!!!
Sent from my GT-N7000 using xda premium
Ah, finally. Good to see AniDroid getting a JB upgrade, well done Novic.
Also, I get a new JB kernel to update in Kernel Repository.
Sorry, v02 kernel have a little BUG that prevents you from changing CPU Freq Governor...
Just fixed it and soon upload the new version of kernel..
Except for what you already stated, kernel works just fine on AOKP as well... I am on Half Illusion CP 3 currently.
Edit: Governor issue resolved with v.03 on HI AOKP, confirming.
Sent from my GT-N7000 using xda premium
Just uploaded the version of Kernel..
Please, install the latest one
Will you make O/C-ability kernel?
mbudh said:
Will you make O/C-ability kernel?
Click to expand...
Click to collapse
Yes, will include the OC functionality soon
was waiting for that
will report soon
thanks
Amazing, glad to see you back in action novic!
Just uploaded 0.4 version of kernel with OC and UC support (from 100 to 1600 MHz with 100 MHz step)
Thank you for OC and UV kernel.
I can change voltage from 1100 to 1600 MHz but for clock 1000 MHz and below I can not change the voltage lower. Whatever I press the slider down and save, it always comes back to default.
I use Voltage Control and System Tuner Pro.
Is that a bug or I made a mistake?
Btw, can you increase the thermal throttling clock higher than 800 MHz? 1200 MHz is still safe and we can get better performance. I used to have 1400 MHz with "Odin's son" kernel in CM9.
Thank you.
Thanks! Will fix it in the next versions!
PS: All voltages below 1000mhz are decreased to the most stable values to save battery
mbudh said:
Thank you for OC and UV kernel.
I can change voltage from 1100 to 1600 MHz but for clock 1000 MHz and below I can not change the voltage lower. Whatever I press the slider down and save, it always comes back to default.
I use Voltage Control and System Tuner Pro.
Is that a bug or I made a mistake?
Btw, can you increase the thermal throttling clock higher than 800 MHz? 1200 MHz is still safe and we can get better performance. I used to have 1400 MHz with "Odin's son" kernel in CM9.
Thank you.
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
Hi,
caming from anidroid ics, i flashed this JB anidroid yesterday but i got a bootloop... need to do a fullwipe, install anidroid v0.2, flash kernel 0.3, reboot in recovery, flash gapps and than everything was ok !!
I see new versions in 1st post, can i just flash the kernel v0.4 or do i need to flash the complete rom?
Atm, i had three issues:
- the clock was stucked, need to reboot the phone
- no deepsleep, changed governor to lulzactive then ok
- tried to change dpi to 280 with dpi changer but got a black screen (no bootanimation)
Other remark:
Contacts pictures during call still pixelized...
Anyway very good rom, thanks :victory:
++
You should flash 0.4 kernel over the ibstalled ROM, with no need to flash the complete ROM.
nogit said:
Hi,
caming from anidroid ics, i flashed this JB anidroid yesterday but i got a bootloop... need to do a fullwipe, install anidroid v0.2, flash kernel 0.3, reboot in recovery, flash gapps and than everything was ok !!
I see new versions in 1st post, can i just flash the kernel v0.4 or do i need to flash the complete rom?
Atm, i had three issues:
- the clock was stucked, need to reboot the phone
- no deepsleep, changed governor to lulzactive then ok
- tried to change dpi to 280 with dpi changer but got a black screen (no bootanimation)
Other remark:
Contacts pictures during call still pixelized...
Anyway very good rom, thanks :victory:
++
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
nogit said:
Hi,
...
Atm, i had three issues:
- the clock was stucked, need to reboot the phone
- no deepsleep, changed governor to lulzactive then ok
- tried to change dpi to 280 with dpi changer but got a black screen (no bootanimation)
...
Anyway very good rom, thanks :victory:
++
Click to expand...
Click to collapse
The only 2 ways for changing DPI without black screen
1) ROM Toolbox Lite/Pro
2) File Explorer with root access (e.g. Root Explorer) and manually edit build.prop in /system
ro.sf.lcd_density=XXX (<- your choice)
Paranoid on Belly Jean // HydraCore 4
Is there fast charge in this from? If not can we get a version with it implemented? It is highly essential at my workplace
novic_dev said:
You should flash 0.4 kernel over the ibstalled ROM, with no need to flash the complete ROM.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
ok done, any ideas about contact pictures bad aspect?? if i change the picture it looks good but after flashing rom the pictures are getting bad again...
AA1973 said:
The only 2 ways for changing DPI without black screen
1) ROM Toolbox Lite/Pro
2) File Explorer with root access (e.g. Root Explorer) and manually edit build.prop in /system
ro.sf.lcd_density=XXX (<- your choice)
Paranoid on Belly Jean // HydraCore 4
Click to expand...
Click to collapse
thanks dude, will give a try to rom toolbox
The good old lock screen delay we had in the early ics roms is back.If i remember it was a kernel issue.
Also the whole phone is somewhat slower in every aspect.I came directly from ics 1.0,no full wipe if that matters.
Will download 0.4 now.
Sent from my GT-N7000 using xda premium
Hi,
I have installed CM11 Nightly + Nypon Kitkat on my Xperia P. I want to know what is the default governor and i/o scheduler on this ROM.
Also I want to change the governor and I/O scheduler, how can i do it without any apps? If any one have good tweaks for this ROM to save the battery pls share it....!!!
See if it helps
karthick.k11 said:
Hi,
I have installed CM11 Nightly + Nypon Kitkat on my Xperia P. I want to know what is the default governor and i/o scheduler on this ROM.
Also I want to change the governor and I/O scheduler, how can i do it without any apps? If any one have good tweaks for this ROM to save the battery pls share it....!!!
Click to expand...
Click to collapse
Hi,
You don't need to install any apps for changing default governor and I/O scheduler. Go to "About Phone", hit "Build number" multiple times to enable developer options[This will enable performance as well]. In the "Performance", you can change default governor and i/o scheduler. If you are not able to see "Performance" link, try installing Performance pack which will provide you those options. Try it out.
Can someone post the default governor and i/o scheduler settings for Xperia P on CM11 Nightly Nypon?
Thank you guys!