good day to all of you guys.. i just need a quick answer. after my question is answered i'll immediately close this thread.
my question is that can i change my kernel using cmw recovery? because i think my usb port is broken and i can't change it by using flashtool.. my phone's current kernel version is 2.6.32.. and i really want to try out the kitkat..
that's all i hope you answer my question, thank you
No...because we use single kernel and multiple ramdisks ...Fix the USB port ...
karandpr said:
No...because we use single kernel and multiple ramdisks ...Fix the USB port ...
Click to expand...
Click to collapse
hm.. i search and found a tutorial to do it.. i just want some confirmation..
http://forum.xda-developers.com/showthread.php?t=1991168
kal27 said:
hm.. i search and found a tutorial to do it.. i just want some confirmation..
http://forum.xda-developers.com/showthread.php?t=1991168
Click to expand...
Click to collapse
It works on Galaxy Y and many other phones since they have two kernel partitions ....It wont work on Xperia MDPI ...But you can go ahead and try to flash the kernel ...either it wont work or perma brick device ...
karandpr said:
It works on Galaxy Y and many other phones since they have two kernel partitions ....It wont work on Xperia MDPI ...But you can go ahead and try to flash the kernel ...either it wont work or perma brick device ...
Click to expand...
Click to collapse
ohh.. i get it now.. thank you sir
Related
Hello XDA..!!
As we know it is currently becoming a Huge problem of not Working Touch screens by installing roms of other Devices ..!!
I heard that problem of my friend Echo juned .. know coming to you with 100% fixed this problem
Instructions..!! To fix ..!!
Download THIS firmware..!! (It is modified Active firmware .42 GB)
Flash it using "flashtool"
boot u r device (first boot can take 10 mins)
and u will see u r touch screen working know..!!..!!
After that install Your device FTF ..
Working on all devices ..!!
Hope this will help...!!..!!
Fix no 2
thanks to eh.zamani
by this tutorial:
1:flash your device gb .62 firmware
2:flash rage kernel
3:flash that wrong rom again
4:if wrong rom was ics,rom will not boot then remove the battery to turn phone off then flash .62 firmware again if it was gb,do the same work
5:wait until stock rom boots the touch will be fixed
Credit's..!!
xshanep19 (this is all his efforts) SPECIAL THANKS TO HIM
regards ..!!
officiallysonyrebel
downloading will test it on xperia mini sti5i which i killed touchscreen by other rom
dragonmasterx said:
downloading will test it on xperia mini sti5i which i killed touchscreen by other rom
Click to expand...
Click to collapse
ok.. plz report ..!!
not working on xperia mini tested it now
touchscreen works but not correctly i will try to flash an ics original kernel and the ics original ftf
MAN YOU STOLE THIS FIX!
Please ask xshanep19 and if you get the permissions to open the thread, give credits to him!
Here's his original post:
xshanep19 said:
I had same problem, i accidently installed something on my xperia mini which was for mini pro which caused touch screen to stop working, i flashed different stock firmware and so on, still the touch screen wouldnt work
i flashed Xperia Active (ST17i) firmware 4.0.2.A.0.42_CE.ftf onto my xperia mini (st15i) in flashtool, then flashed stock mini firmware 4.0.2.A.0.62 afterwards
my touchscreen is working again
im not sure if this will work for anyone else, just thought id share what i did...
Click to expand...
Click to collapse
So please ask him, this is the way we're doing it on xda!
mihahn said:
MAN YOU STOLE THIS FIX!
Please ask xshanep19 and if you get the permissions to open the thread, give credits to him!
Here's his original post:
So please ask him, this is the way we're doing it on xda!
Click to expand...
Click to collapse
Deleted
officiallysonyrebel said:
srry didn't know about that cause was working on it .. since 1 month and got this fix ... and it not exactly same because i have changed some files
in active ftf..!! and i make fixes of my own and if i share fixes by other's I always write share there..!!
Click to expand...
Click to collapse
You can't change files in ftf, because ftf is sony signed so this is impossible! So I think you took it from the post I mentioned before!
Delete...
Till-Kruspe said:
Delete...
Click to expand...
Click to collapse
Reported it, too. Let's see how the mod decides!
officiallysonyrebel as stated this has been shared previously however not in it's own thread so in the spirit of sharing it's fine to post it up however you must give credits to where you found it. It also seems that your guide is not complete as you can't stop at just flashing the active FTF which is a stock Sony file not modified so please don't tell people it is. For it to fully work you need to then flash the stock firmware for the device over the top as per xshanep19's instructions.
To clear everything up please complete your instructions and also link to xshanep19's post to say the instructions are also there but you're just making them available for everyone who might not see that post.
Thanks
AvRS
AvRS said:
officiallysonyrebel as stated this has been shared previously however not in it's own thread so in the spirit of sharing it's fine to post it up however you must give credits to where you found it. It also seems that your guide is not complete as you can't stop at just flashing the active FTF which is a stock Sony file not modified so please don't tell people it is. For it to fully work you need to then flash the stock firmware for the device over the top as per xshanep19's instructions.
To clear everything up please complete your instructions and also link to xshanep19's post to say the instructions are also there but you're just making them available for everyone who might not see that post.
Thanks
AvRS
Click to expand...
Click to collapse
thanx mod doing it asap .. because when i was editing it my internet connection (doesn't know What happen..!!)
mihahn said:
MAN YOU STOLE THIS FIX!
Please ask xshanep19 and if you get the permissions to open the thread, give credits to him!
Here's his original post:
So please ask him, this is the way we're doing it on xda!
Click to expand...
Click to collapse
srry bro It was not me with this account .. was in tution at that time and my younger just messed up everything sorry again..!! hope u understand..!!:angel:
Btw I don't think that the phone will boot up completely with the active ftf. I think you have to flash the ftf for your device first, before you will get it booting, or am I wrong?
mihahn said:
Btw I don't think that the phone will boot up completely with the active ftf. I think you have to flash the ftf for your device first, before you will get it booting, or am I wrong?
Click to expand...
Click to collapse
nope i think as from one person .. used this and he said that phone is booting and touch screen is working .. but not correctly u just have to flash Your specific device FTF ..!! and touch screen working after that..!!
officiallysonyrebel said:
nope i think as from one person .. used this and he said that phone is booting and touch screen is working .. but not correctly u just have to flash Your specific device FTF ..!! and touch screen working after that..!!
Click to expand...
Click to collapse
Okay this could work, just thought because of different libs...
But I won't test it and tinker with my touchscreen
mihahn said:
Okay this could work, just thought because of different libs...
But I won't test it and tinker with my touchscreen
Click to expand...
Click to collapse
Please confirm if anyone Succeded
Sent from my S7 using xda premium
---------- Post added at 09:37 PM ---------- Previous post was at 09:27 PM ----------
Is it work for unlock BL Or just for lockBL, Thanks
Sent from my S7 using xda premium
sjeik1985 said:
Please confirm if anyone Succeded
Click to expand...
Click to collapse
I know it doesn't work for me. I already replied in the other thread as well
stuck at flashtool
I followed the steps as mentioned by you and while flashing you given rom i get this error....
ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="IMAGE_ADDRESS_RANGE";ERR_DYNAMIC="SIN-block eraseblock mismatch";
and it aborts flashing......may i know where i am going wrong. I am desperate to get my phone working.:crying:
Arbelzapf said:
I know it doesn't work for me. I already replied in the other thread as well
Click to expand...
Click to collapse
What's ur device? It's lockBL or unlockBL
Sent from my S7 using xda premium
Xperia mini pro with locked bl:fingers-crossed:
by the way i have unlocked the bl and proceeded but no results yet
Hi everyone,
i need your help to fix my problem with jelly vanilla rom 6.1 of iiandskater.
I use Mesa kernel 4.1 and sometimes get freeze problem in Setting/App, i can't touch anything in about 3 minutes, and then it's back to default.
I try other roms and don't see that problem. I like Jelly Vanilla so much, so who can help me fix this?
Thank you so much!
P/S: sorry for my bad English
best solutons of ur problem is ask to ur kernel/rom thread
xzn said:
best solutons of ur problem is ask to ur kernel/rom thread
Click to expand...
Click to collapse
There you go. It's the best way to get answers and support.
AchillesAOT said:
There you go. It's the best way to get answers and support.
Click to expand...
Click to collapse
xzn said:
best solutons of ur problem is ask to ur kernel/rom thread
Click to expand...
Click to collapse
U guys serious? He just made his initial post so how the hell can he post in dev sections...
But ya he shud have posted this in q/a forum. Reported...Mods may move it soon
Best Regards,
AJ
alokbina said:
U guys serious? He just made his initial post so how the hell can he post in dev sections...
But ya he shud have posted this in q/a forum. Reported...Mods may move it soon
i'm a newbie and this's my first post
i can't reply in thread of iiandskater so i post my question here to get your help
i really nead help, if you know how to post a reply in that thread, please show me.
Thank you so much
Click to expand...
Click to collapse
lee_bruce said:
alokbina said:
U guys serious? He just made his initial post so how the hell can he post in dev sections...
But ya he shud have posted this in q/a forum. Reported...Mods may move it soon
i'm a newbie and this's my first post
i can't reply in thread of iiandskater so i post my question here to get your help
i really nead help, if you know how to post a reply in that thread, please show me.
Thank you so much
Click to expand...
Click to collapse
Hit the first ten post mark.
Reply about anything you know to othersask ur doubtsvoila u have ten posts and u can reply in development
Don't forget to hit thanks
Click to expand...
Click to collapse
mnishamk said:
Hit the first ten post mark.
Reply about anything you know to othersask ur doubtsvoila u have ten posts and u can reply in development
Don't forget to hit thanks
Click to expand...
Click to collapse
But he is allowed to ask, too. Just because he doesn't have the ten points mark doesn't mean he can't ask
Did you try to flash another kernel? Not MESA but another one? Or try to reflash the rom.zip without wipe data/factory reset
lee_bruce said:
Hi everyone,
i need your help to fix my problem with jelly vanilla rom 6.1 of iiandskater.
I use Mesa kernel 4.1 and sometimes get freeze problem in Setting/App, i can't touch anything in about 3 minutes, and then it's back to default.
I try other roms and don't see that problem. I like Jelly Vanilla so much, so who can help me fix this?
Thank you so much!
P/S: sorry for my bad English
Click to expand...
Click to collapse
Hi I know your issue since I faced it.The kernel you are using is bad for this rom.
Use FXP/CM9.1/CM10 Extended kernel for Xperia Mini Pro
This is found in the kernel section.Just see your device and download the latest one.
Then use flash tool to flash it after when you boot into jelly vanilla rom 6.1 make a factory data reset with also erasing mmc
It will solve your problem:good:
ryu2050 said:
Hi I know your issue since I faced it.The kernel you are using is bad for this rom.
Use FXP/CM9.1/CM10 Extended kernel for Xperia Mini Pro
This is found in the kernel section.Just see your device and download the latest one.
Then use flash tool to flash it after when you boot into jelly vanilla rom 6.1 make a factory data reset with also erasing mmc
It will solve your problem:good:
Click to expand...
Click to collapse
Thank you ryu i will try your way!
lee_bruce said:
Thank you ryu i will try your way!
Click to expand...
Click to collapse
Definitely use CM10 extended for its stated in rom that it needs this kernel.Also let me know if it work,even though I know it will:laugh:
mihahn said:
But he is allowed to ask, too. Just because he doesn't have the ten points mark doesn't mean he can't ask
Did you try to flash another kernel? Not MESA but another one? Or try to reflash the rom.zip without wipe data/factory reset
Click to expand...
Click to collapse
Yeah, i tried to flash lupus kernel for cm10 but it's not as smooth as mesa. I've never flash rom without wipe data before and will try this, can you explain me more. Thanks for your warmly help, that's good for newbie like me
ryu2050 said:
Definitely use CM10 extended for its stated in rom that it needs this kernel.Also let me know if it work,even though I know it will:laugh:
Click to expand...
Click to collapse
Hey ryu, my device is wt19i, so can i use this kernel which is for mini?
lee_bruce said:
Hey ryu, my device is wt19i, so can i use this kernel which is for mini?
Click to expand...
Click to collapse
your model is wt19i so its Live with Walkman™ phone with code-name-- (coconut)
I don't know but I don't think its advisable then search for any kernel cm10 based apart from mesa,try LuPuS-jB [LINARO 4.7][CM10 BASED],but this one had wi if issues for my mini pro.Give it a shot
looks like you already tried it then??
PS i thought your one was mini pro as well
lee_bruce said:
Yeah, i tried to flash lupus kernel for cm10 but it's not as smooth as mesa. I've never flash rom without wipe data before and will try this, can you explain me more. Thanks for your warmly help, that's good for newbie like me
Click to expand...
Click to collapse
To reflash the rom, just download the latest cm10.zip for your phone (if it's a live with walkman, wt19i then download the one for coconut) and the gapps (google apps) for android 4.1.2. Now put the two files on your sdcard and reboot in cwm or TWRP recovery. Then you just wipe cache (no data will be lost) and flash the cm10.zip and afterwards the gapps. Reboot and see if the lag still exists
If it still exists you have to change the kernel, or you try another version of MESA
Im looking at installing this rom [ROM][AOKP-4.1.2] TokoRom V2 [AROMA+OTA][Sense Style][18/03/2013] and was wondering if it supported dual boot via the Siyah Kernel , i would have asked this in the roms particular thread but seeings i dont have enough posts on the forum i cant. would appreciate help.
shigbee18 said:
Im looking at installing this rom [ROM][AOKP-4.1.2] TokoRom V2 [AROMA+OTA][Sense Style][18/03/2013] and was wondering if it supported dual boot via the Siyah Kernel , i would have asked this in the roms particular thread but seeings i dont have enough posts on the forum i cant. would appreciate help.
Click to expand...
Click to collapse
U can, as long as the second rom u chose is also an AOKP/CM/AOSP based one
Sun90 said:
U can, as long as the second rom u chose is also an AOKP/CM/AOSP based one
Click to expand...
Click to collapse
Thanks a bunch for the quick reply :good: Time to get my flash on :victory:
Hi we need sdmereg in an Arabic rom the latest here is v10h i really need it.
And by the way don't use swapper 2 it will KILL ur phone (Lseries even if swap is enabled) and it will be so hard to repair it with JTAG
shady2137 said:
Hi we need sdmereg in an Arabic rom the latest here is v10h i really need it.
And by the way don't use swapper 2 it will KILL ur phone (Lseries even if swap is enabled) and it will be so hard to repair it with JTAG
Click to expand...
Click to collapse
You can add RTL to any unarabic rom so that you can read and write arabic letters correctly.
just follow this thread for more informations :fingers-crossed:
Ahmed hamouda said:
You can add RTL to any unarabic rom so that you can read and write arabic letters correctly.
just follow this thread for more informations :fingers-crossed:
Click to expand...
Click to collapse
thx man t7ya Masr
is this 4 Samsung only or what?
cuz iam not thinking about getting another hard brick tell me if there are any risks
shady2137 said:
thx man t7ya Masr
is this 4 Samsung only or what?
cuz iam not thinking about getting another hard brick tell me if there are any risks
Click to expand...
Click to collapse
Not Samsung Devices Only. For Any Android Device :fingers-crossed: This Cant Cause Any Hard Brick. You Can Face Bootloops Only If You Applied It Wrong Way. A KDZ Reflash Can Solve This Problem Without Any Harmful Issues
mmm
[QU OT E= Ahmed hamouda;46615475]Not Samsung Devices Only. For Any Android Device :fingers-crossed: This Cant Cause Any Hard Brick. You Can Face Bootloops Only If You Applied It Wrong Way. A KDZ Reflash Can Solve This Problem Without Any Harmful Issues [/QUOTE]
Okk. Isee the rom i want to install is ODEXED can i do this to it
?!!http://forum.xda-developers.com/showthread.php?t=2305002
Ahmed hamouda said:
Not Samsung Devices Only. For Any Android Device :fingers-crossed: This Cant Cause Any Hard Brick. You Can Face Bootloops Only If You Applied It Wrong Way. A KDZ Reflash Can Solve This Problem Without Any Harmful Issues
Click to expand...
Click to collapse
Okk. Isee the rom i want to install is ODEXED can i do this to it
?!!http://forum.xda-developers.com/show....php?t=2305002
shady2137 said:
Okk. Isee the rom i want to install is ODEXED can i do this to it
?!!http://forum.xda-developers.com/show....php?t=2305002
Click to expand...
Click to collapse
Just Follow The Instructions On My Thread & Every Thing Will Be Fine
Ahmed hamouda said:
Just Follow The Instructions On My Thread & Every Thing Will Be Fine
Click to expand...
Click to collapse
mmm ok i will it seems easy but u mentioned the rom must be DEODEXED. not ODEXED That confusing me thx again
shady2137 said:
mmm ok i will it seems easy but u mentioned the rom must be DEODEXED. not ODEXED That confusing me thx again
Click to expand...
Click to collapse
Yes The Rom Must Be Deodexed. I Brefer To Use A Deodexed Rom To Avoid All Problems. If You Insist On Odexed Rom So You Can Use xUltimate To Deodex It
well i wanna know if our device support those mobile odin? i don't have pc right now. so, if i my star support those mobile odin i can flash recovery key combo fix directly from my device. so that i will be able to tweak my star without worrying of messing it.. well im so excited to use mobile odin if supported... anyone who had test please tell me
kima09 said:
well i wanna know if our device support those mobile odin? i don't have pc right now. so, if i my star support those mobile odin i can flash recovery key combo fix directly from my device. so that i will be able to tweak my star without worrying of messing it.. well im so excited to use mobile odin if supported... anyone who had test please tell me
Click to expand...
Click to collapse
maybe... but i don;t know about it..
but if you only want to flash already recovery key combo fix and have cwm installed and is rooted.. i may provide you with cwm flashable fix..
psych.half said:
maybe... but i don;t know about it..
but if you only want to flash already recovery key combo fix and have cwm installed and is rooted.. i may provide you with cwm flashable fix..
Click to expand...
Click to collapse
Its made by chainfire so it will most probably work
psych.half said:
maybe... but i don;t know about it..
but if you only want to flash already recovery key combo fix and have cwm installed and is rooted.. i may provide you with cwm flashable fix..
Click to expand...
Click to collapse
yeah my phone is already rooted and have cwm install. if you could provide me flashable zip, it would be sooo great....
yea thank you in advance
T3snake said:
Its made by chainfire so it will most probably work
Click to expand...
Click to collapse
i think it will just say "Device not supported" or something like that.. :|
kima09 said:
yeah my phone is already rooted and have cwm install. if you could provide me flashable zip, it would be sooo great....
yea thank you in advance
Click to expand...
Click to collapse
i will upload to the same fix thread in general section.. will ya test it.?. O__O
Buddy, Mobile Odin is not supported for our s5282, but u can test it by downloading apk from google.com , if it works then post here
psych.half said:
i think it will just say "Device not supported" or something like that.. :|
i will upload to the same fix thread in general section.. will ya test it.?. O__O
Click to expand...
Click to collapse
yeah sure... i had tested the first fix post but not working. i think that odin flashable file will be better than the first one. which need to flash as bootloader...
ill test your file if you upload
kima09 said:
yeah sure... i had tested the first fix post but not working. i think that odin flashable file will be better than the first one. which need to flash as bootloader...
ill test your file if you upload
Click to expand...
Click to collapse
you mean in the orginal dev thread? that is same as stock.. infact it doesn't even have init.d support.. >_>
okay.. uploading it right now.. do test and report.. check my thread in the General section
psych.half said:
you mean in the orginal dev thread? that is same as stock.. infact it doesn't even have init.d support.. >_>
okay.. uploading it right now.. do test and report.. check my thread in the General section
Click to expand...
Click to collapse
yeah, just test it. it works perfectly..oh, i can't say how thankful i am to you.....