First off I am on mdk and rooted and up until today have been running hd 10.2. I had been having some weird things happen with twrp 2502 so I went into goo and tried to update to the newest version of twrp. it downloaded and went through with everything and I rebooted into recovery. once I got into recovery it was showing I was still on 2502, but it was asking for a password which I had never seen before. I backed out and tried to boot into my rom again and it got stuck on the samsung custom screen. pulled the battery a few times and still kept getting stuck. went back into recovery and tried to restore a known good backup that I had restored before, but it keeps failing. I had rls12 on my phone so I tried installing it dirty since I cant wipe anything due to the whole password thing in twrp which said it was succesful but still gets stuck on the samsung custom screen. it sits there for about 10 seconds and loops. I tried about 10 more times to get my backup restored and it finally finished and booted into the rom. I left it this way for an hour or so and did some stuff with my phone, tried to update twrp again which did the same thing again and still shows 2502. after the reboot I am back to the same problem of not being able to do anything in twrp except restore or dirty flash, I cant get the usb to mount in twrp so I cant try putting another rom on the phone unless I go and buy a micro sd adapter.
I am in the process of downloading a stock mdk rom to try and flash in odin, but is there anything I can try before I go through with this, or is it pretty much my only option.
after some more research I think I figured out what caused all this. I wiped the data partition with the old version of twrp which screwed it up pretty bad. Apparently the older versions of twrp were known to have this problem. I kept trying to restore, but trying to restore kept failing on the data partition. After about 25 attempts of trying to restore just the data partition I was able to get it to work finally, and then I restored the the others and got it to boot back into the rom. like an idiot I rebooted the phone back into recovery after it finished and had the same problem again. another couple hours wasted trying to restore the data partition and it worked again and this time i was able to get twrp to update and then went back to recovery and formated the data partition again and it seems to have fixed the problem. Now to figure out why hd rls 12 wont install.
Related
I was using my phone and all had been working fine for ages. It was in my pocket for a while and when i took it out to use it I saw that it was on the boot animation of CM11. My phone was already on when I last used it so I had assumed it had crashed. I took the battery out and turned the phone on again but it got stuck on the CM boot animation. The last time I turned on my phone before that was when I flashed a supersu zip file to make my root work as I was having some problems. After flashing the supersu zip and told my CWM recovery to restart the system, it prompted me to "fix root" or something like that, and I clicked yes and it booted normally. That was the last time it booted normally before being stuck as it is now. First thing I did after it got stuck was go into recovery and reflash my current rom ( a CM11 snapshot) I then got faced with a status 7 error and so couldnt flash the rom. So then I flashed multiple other CM11 roms, none of which worked, so I flashed a CM10.2 stable rom which worked. I then got faced with the fix root before reboot thing and so I clicked yes. Still had the stuck booting thingy. I tried many things, flashing kernals roms gapps etc and nothing made a difference. I wiped cache, dalvik cache and no difference. I even wiped the system and tried to flash roms but only the 10.2 one would work, still got a status 7 with the CM11 ones. When I wiped my data however and flashed CM 10.2, it booted. I still couldn't flash the CM11 roms though even after a factory reset. So I have the reason to believe something in the data is wrong, not cache system or anything like that. What could it be? I don't want to have to lose all my data in order to be able to use my phone again, even then, something is still wrong as my phone won't flash CM11 roms anymore. So my questions are;
What things could have caused this?
Can this be a problem from flashing the supersu zip (a root issue)
Is it possible to somehow view or copy the internal data on a computer (since I cant get into the operating system), and this would allow me to get all my pictures contacts music etc anything so I can use my phone by wiping data?
Thanks, sorry this is quite long and probably hard to understand whats going on, but help is appriciated thanks
Don't fix root if you wish to use SuperSU instead builded-in cm superuser. Also try to flash via Odin latest recovery. TWRP should be fine. You can mount partitions from recovery level to download data to your computer. Of course if it still exists. If not, if they are corrupted you need to flash stock ROM and repeat whole cm11 adventure again. If Odin successfully flash the stock then it's a chance your partition layout and user data are untouched.
____________________________________________
P3110 / I9300 / I9100 / NEXUS 5 / iPAD2
Alright, I know enough to be dangerous. I rooted my Samsung tab a 10.1 by installing twrp and then super su, all went fine. I then began to try and make a nandroid back up. It kept saying unable to mouth data, so I read a little and I changed data format. This caused a boot loop. Went in and changed back data format and used twrp to reset. All was fine again. I then attempted to use titanium backup. I recited a message backup was successful and reboot. I rebooted and now a boot loop. I then tried to reset with twrp and my file is gone. So, I downloaded what I thought was the right firmware to flash with Odin but just made that worse. Does anyone have a download for a rom I can flash with Odin to get this thing going. I have downloaded a couple and the either don't work or are the wrong one. SM-T580.
tlstaggs said:
Alright, I know enough to be dangerous. I rooted my Samsung tab a 10.1 by installing twrp and then super su, all went fine. I then began to try and make a nandroid back up. It kept saying unable to mouth data, so I read a little and I changed data format. This caused a boot loop. Went in and changed back data format and used twrp to reset. All was fine again. I then attempted to use titanium backup. I recited a message backup was successful and reboot. I rebooted and now a boot loop. I then tried to reset with twrp and my file is gone. So, I downloaded what I thought was the right firmware to flash with Odin but just made that worse. Does anyone have a download for a rom I can flash with Odin to get this thing going. I have downloaded a couple and the either don't work or are the wrong one. SM-T580.
Click to expand...
Click to collapse
Alright, I was using an olsee version of odin, got the new one and I was able to flash a rom. It says tab a 6 on boot up bit it is functional. Now my question? Can anyone recommend a custom rom that is nebiew friendly. I'm food at following directions and problem solving but I about had a panic attack, I just got this $300 thing. Sigh off relief for at least getting it functional again.
Hmm
Ok so I have flashed a stock rom, 6.0.1, flashed TWRP, and installed SuperSU. all is working well again. However I am still getting "unable to mount data" message in TWRP when i try to make a backup. If i uncheck data on the list it backs up fine. This is what got me in that boot loop pickle before when i tried to change the data format. What data format? Idk, im scared to jack with it anymore, and im done with titanium backup, it has burned me in the past, though i think what went wrong there was when i backed everything up i then went and change data format and after all that restored and the backup was in a different data format. Idk newbie guess. I am just trying to getting a reliable nandroid backup. Anymore ideas? Perhaps i should just leave it alone and be happy with just having root.
Its my daughters bog standard, cheap chinese MTK6580 phone (uhappy up580 if it matters)
It came with stock 5.0 a few years back so I flashed TWRP, rooted it, ported a CRdroid 5.1 rom for it and was working fine. Yesterday on boot every app refused to start, or stopped, or froze including stock launcher and settings so I couldnt do anything at all. Booted to TWRP and wiped cache and dalvik but although TWRP said completed, it hadnt.
So decided to wipe EVERYTHING including data and again TWRP said it had but upon reboot the faulty rom was still there, not working.
Tried to flash a backup that ended in tar error, fixed that and it flashed the backup fine, rebooted but it hadnt.
Tried to TWRP flash a new rom, said it had but it hadnt,
Used SPFlash tools to flash the stock 5.0 rom, THAT said it completed after the usual time and procedure, rebooted but it hadnt
Used SPFlash tools to completely format and wipe the phone which also said it had completed but it hadnt.
I CANNOT wipe this phone using any method I know of! or install or flash anything! Just this same custom rom that was fine for years and just went wrong. Does ANYONE know how I can somehow wipe this phone or flash a new rom? Tried flashing a TWRP with SP tools AND a TWRP .img and they all said completed but obviously, nothing did.... I've accidently bricked phones easier than I can deliberately wipe this one
Any help greatly appreciated.
emmc is weared out. therefore it is read only
aIecxs said:
emmc is weared out. therefore it is read only
Click to expand...
Click to collapse
Gah... exactly what I suspected but hoped not
cheers
hey guys just looking for some help. ive been modding and flashing phones from 2014, but its always gone really smoothly, so my diagnostic ability is lacking.
it started with flashing twrp. my bootloader is unlocked, usb debugging on, device is showing in adb and fastboot, and i can flash twrp without any issues. hoowever when i go to boot twrp, only the stock recovery boots. i tried to flash twrp using the XiaoMiTool v2, but the same thing happened. i eventually got around this by just booting twrp instead of trying to flash it. so i got in, took a full back-up and started installing a custom rom.
the first one i tried was ParanoidAndroid Quartz. i wiped cache, dalvik and storage then transferred it to my phone, tried to flash and got "zip verification failed". so i turn off zip verification and tried again. it flashed perfectly with zero errors. however, when i reboot the phone it would only boot to stock recovery and not twrp (expected) or the new rom. i tried that a few times, then tried LineageOS, and MSM Xtended 10. all of them had the same issue, the flashed without a hitch, then wouldnt boot.
i also tried flashing a new fw-vendor and it just straight up failed. Then i decided to cut my losses and restore my twrp backup, and that came back with the error, "extractTarFork() process ended with error: 255"
Software before i began these attempts was completely stock, so i dont know what is going wrong, but as of now, my phone is bricked, i cant install a new rom or restore my back-up.
any help is appreciated guys. thanks
You can figure out this problem with
1 Copy backup folder to computer
2- Format Data - Yes , Wipe Everything
3- Install ROM that you have installed before and boot
4- Go to TWRP, format data yes reboot recovery
5- Paste backup folder to internal storage and restore
So, I can't restore my backup due to the error above. When I restore my backup, I get that error and a reboot loops me straight back into TWRP. You can read all that stuff below if you need the backstory.
(I had Lineage OS 18.1 installed and wanted to restore a backup from two weeks ago. So, I booted into TWRP, did a normal factory reset and restored the Backup of Lineage. However, it put out an error regarding something in root (structure needs cleaning). I tried rebooting into system, but it ended in fastboot mode. So I googled it and one thread said you can solve that by formatting system. "System" is backed up anyway, so I thought there was no harm, wiped it and restored the same backup once again. No error this time.
However, when I rebooted into system, the unlock pattern didn't work any more, even though I never changed it and always use the same one. I had to reboot into recovery, and now the TWRP unlock pattern didn't work either. Had to skip it and did another reset.
Now, every time I restore a backup (and those backups contain basically every partition available) it works, but when I reboot into system it just stops at the boot logo, then reboots into recovery. Basically a boot loop plus. Tried a fresh flash, same loop.
Also, all of my pictures and downloaded files are gone, because it's encrypted. I had to wipe data, which led to the whole encryption issue going away, however, I'm still stuck in that loop.
Does anyone know how to solve this cluster****? How do I get it to boot into system?
Edit: Managed to flash LIneage new after wiping data and system and it actually boots, hallelujah, but when I flash the back up I'm still at square one with the same fail and it fails to boot. )