Hi guys, I hope you can help....my phone has the latest cyanogenmod ROM installed and all has been running well...until today.I had the phone on charge and when I tried to boot it was getting stuck on the 'samsung galaxy s iii GT-I9300' screen..I have rebooted to recovery cleared cache, delvik cache and installed the ROM again, rebooted and still not working, so I repeated the same steps but also done factory reset, still the same. I have tried to connect the phone to pc but it is failing to load MTP usb drivers ....which I think is a unrelated issue.
I'm sure I should be able to get it going via recovery, have been trying all day...is there something I should be doing that I haven't tried already?
Hope somebody can help as I'm pulling my hair out!
Thanks in advance.
Donna
flash official firmware from sammobile.com via odin
Is product name blank in download mode, if yes then you have SDS and need a new motherboard. If no then flash stock rom using odin after full wipe and format of system & data, factory reset in recovery after flash and see if it boots.
Sent from my GT-I9300 using Tapatalk
If you can go into recovery mode, it's not SDS, if you have backup just restore it, or go into download mode and flash stock Samsung firmware.
Make sure that you have latest Samsung drivers on your computer installed.Good luck.
Hi guys...
Thanks for the replies, I'm in the process of downloading the latest stock ROM, I didn't realise it was such a big file 800+MB!
Donna
still no luck
Hi guys,
I tried to reflash stock via odin and kies but still the phone is stuck on the samsung logo...so I tried reflashing CM 10.2 but its still the same....I really dont know what else to try...any help would be appreciated.
Donna
Simonna said:
If you can go into recovery mode, it's not SDS, if you have backup just restore it, or go into download mode and flash stock Samsung firmware.
Make sure that you have latest Samsung drivers on your computer installed.Good luck.
Click to expand...
Click to collapse
It is possible to have sds even if u can boot into recovery.
Sent from my GT-I9300 using xda app-developers app
MrsDLA said:
Hi guys,
I tried to reflash stock via odin and kies but still the phone is stuck on the samsung logo...so I tried reflashing CM 10.2 but its still the same....I really dont know what else to try...any help would be appreciated.
Donna
Click to expand...
Click to collapse
After installing stock with odin did you do a factory reset straight away?
JellyYogurt said:
It is possible to have sds even if u can boot into recovery.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Well,as much as I have read about SDS, you can't go into recovery mode,you can go only into download mode and there is blank product name.So maybe to OP it's a different situation, and to OP I would suggest to check if product name on download mode isn't blank.
JellyYogurt said:
It is possible to have sds even if u can boot into recovery.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately not
1) Complete eMMC failure. This usually happens over night whilst on charge* - The LED may be lit but the phone will not wake. Subsequent removal of the battery will turn off the LED. You will never get the LED back on. The phone will never turn on again. It needs to go to a service centre and have the motherboard replaced
* Being on Charge is NOT the cause. This is a writing to memory issue and it is more likely to happen when teh device is awake rather than in deep sleep. When the S3 is on charge, it holds a wake lock (so remains awake) throughout the entire charging period, meaning SDS is more likely to occur when on charge This does not mean you should avoid charging your phone. If it's going to happen, it's going to happen
2) Half SDS as it has not-so-affectionately become known. This tends to be more of a boot loop of the Samsung boot splash. the eMMC is partially wiped out. You cannot boot into android or recovery . It fails at the boot screen, but the screen does turn on none-the-less. The only; thing you can do is top boot into Download mode.
Hi guys
Just to clarify, the product name on download mode isn't blank....and yes I tried the reset after loading from odin.
Donna
In recovery .
Format system data cache and sd card .
Boot to download mode flash stock rom via Odin .
JJEgan said:
In recovery .
Format system data cache and sd card .
Boot to download mode flash stock rom via Odin .
Click to expand...
Click to collapse
just tried that...still no luck.
Donna
Reflash and turn it on and wait for some time, dont pull out battery, just wait, nothing to lose
Sent from my GT-I9300 using XDA Premium 4 mobile app
Related
S2 TGY(HK version ) 4.0.3 offical room rooted ,I cannot boot it on and stop at the "SAMSUNG GALAXY SII GT-I9100" screen , I can't wipe data/factory reset in the recovery mode. HELP PLEASE !!
Flash an official from from intratech's thread in Original Development
Sent from my GT-I9100 using xda premium
Can boot into recovery or not?
Sent from my GT-I9100 using xda premium
Yes,it can get into recovery /download mode
xtim2816 said:
Yes,it can get into recovery /download mode
Click to expand...
Click to collapse
Let me understand 100%....
If you have battery pulled and then cannot boot into recovery or download mode. Correct ?
But you can power on, but stuck on the boot screen. Correct ?
If this is both correct, maybe your boot partition is corrupted and without download mode or recovery the only hope is the USB jig to force it to boot into download mode and then you can flash official firmware with Odin.
Sent from my GT-I9100 using xda premium
BOTH right ,I can get into download or recovery mode when power on , but stuck on the boot screen. When I charge it , the battery logo isn't appear.
what should I do??
Please explain what exactly steps you were doing that lead to your situation. Maybe others will have another idea.
Try the USB jig to force your phone into download mode and flash firmware with Odin as previously suggested.
If the jig doesn't work. You're bricked and only a JTag or Samsung service center can now help.
Sent from my GT-I9100 using xda premium
List of JTag repair;
http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
Sent from my GT-I9100 using xda premium
I FLASHED the offical room found in firmware.COM ,after that , it reboot and get into the recovery mode itself.
Excellent, seems we misunderstood each other , otherwise you would not have been able to flash anything.
Now. Just flash root kernel (with cwm included) and you'll be good to flash your favorite rom.
Don't forget to full wipe before the rom flash (system.data.cache.dalvik) and you will be trouble free. First boot will take a while so be patient.
Sent from my GT-I9100 using xda premium
I can't wipe data/factory reset .. When I push the power button to confirm ,it crash.
xtim2816 said:
I can't wipe data/factory reset .. When I push the power button to confirm ,it crash.
Click to expand...
Click to collapse
I think you are really messing up the things...
You told you flsahed one firmware form one website, was it successful? after that, are you able to boot your phone?
I can turn it on, but I cannot Wipe data/factory reset ...
xtim2816 said:
I can turn it on, but I cannot Wipe data/factory reset ...
Click to expand...
Click to collapse
what do you mean by turn on? your phone is booting now, and able to use? or still stuck at galaxy logo?
still stuck at galaxy logo..............
xtim2816 said:
still stuck at galaxy logo..............
Click to expand...
Click to collapse
then your flashing did not do anything?
dont do factory reset, first try wipe cache, and wipe dalvik cache? then try reboot.
if unsuccessfull pick an official ICS rom from here http://forum.xda-developers.com/showthread.php?t=1544487 and flash from ODIN, and root
(pull battery, put back, vol-down+home+Power then vol-up to get download mod)
refere this site for using of ODIN : http://forum.xda-developers.com/showpost.php?p=13712988&postcount=1
xtim2816 said:
still stuck at galaxy logo..............
Click to expand...
Click to collapse
need to remind you mate that you MUST do a backup of ur rom before attempting to do anything else on ur phone... just in case you messed up everything, then you do have at least 1 solution at hand..
try to download any rom from intratech and flash it via odin..
if you cant get into download mode, you must right now, have USB jig
I can get into download mode and flashed room but it reboot and get into recovery mode itself again .
u got urself a Bootllop
xtim2816 said:
I can get into download mode and flashed room but it reboot and get into recovery mode itself again .
Click to expand...
Click to collapse
Nothing to panic about, first of all, FLASH A STOCK FIRMWARE..and it will boot into the recovery showing loads of errors, well the problem has not been solved,clearly..
Now, Flash a Stock Kernel Via ODIN..Or a CF-Root kernel as suggested by one of the users! Also,if u still face problems, In the Question & Answer Section of the Forum For SGS2,u will find :
http://forum.xda-developers.com/showthread.php?t=1457458
&
http://forum.xda-developers.com/showthread.php?t=1108499
please go thorough the respective threads,read and you will find a solution and,make sure ur battery does not run out
Try flashing a custom root ROM such as Litening ROM v2.6. You can flash .tar directly with Odin. It will install CWM Recovery and siyahkernel. Give it time to first boot maybe 5 minutes ... be patient
http://forum.xda-developers.com/showthread.php?t=1095274
Download
http://z13.invisionfree.com/Litening/index.php?showtopic=199
After., update to the latest ICS siyahkernel with custom cwm recovery here
http://www.gokhanmoral.com/gm/2012/04/06/siyahkernel-v3-0-2/
Sent from my GT-I9100 using xda premium
hey guys
My samsung galaxy s3 GT-i9300 will not boot up ,only shows the samsung logo
after trying to ROOT my device the problem came in
i tried flashing stock firmware using odin nothing works
and after trying to flash the firmware my samsung has gone even worse it now says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN"
i cannot get into recovery because it do not not work!!
The only thing that works is download mode
HELP ME PLEASE
5AL3H said:
hey guys
My samsung galaxy s3 GT-i9300 will not boot up ,only shows the samsung logo
after trying to ROOT my device the problem came in
i tried flashing stock firmware using odin nothing works
and after trying to flash the firmware my samsung has gone even worse it now says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN"
i cannot get into recovery because it do not not work!!
The only thing that works is download mode
HELP ME PLEASE
Click to expand...
Click to collapse
As long as you can get in downloadmode you`re oke. Look om www.sammobile.com/firmware for the stock rom you need (country or region you live in) and flash it with Odin. See item 3 in my signature for a detailled tutorial how to do that. You might need a jig however, but try getting in downloadmode manualy for now.
Stock firmware follow instructions .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
I have a similar problem
My S3 does not work after I root it, please give me a instruction link to recuse it. Thanks.
I tried flashing (Odin v3.04) the official 4.1.1 after trying the official 4.1.2 and now neither of them work. I am constantly stuck at the "SAMSUNG" logo boot stage.
I can enter download mode fine and also recovery mode but I am stumped on what to do to fix the problem.
Does anyone have a fix?
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
That' did the trick... thanks!!!
err....
Having the same problem, after flashing stuck at samsung logo...cant but into recovery to do dalvik or anything else but can access download fine.I need to use my phone so replies are apprecciated :l.
Edit: Found more updated version of stock firmware from sammobile, will try that tomorrow and post results.I hope this works, though the problem may be because I cant wipe the dalvik or data because I cant access recovery, I was previously running cm10.1 nightlies and trying to get back to stock.
same problem
aaronq48 said:
Having the same problem, after flashing stuck at samsung logo...cant but into recovery to do dalvik or anything else but can access download fine.I need to use my phone so replies are apprecciated :l.
Edit: Found more updated version of stock firmware from sammobile, will try that tomorrow and post results.I hope this works, though the problem may be because I cant wipe the dalvik or data because I cant access recovery, I was previously running cm10.1 nightlies and trying to get back to stock.
Click to expand...
Click to collapse
same thing happened to me, I was running AOKP, i've tried everything......
successful reboot.thanks mikep99.
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
my GT-I9300 cannot even boot into recovery mode,what shell i do?
GT-i9300 stuck at the startup logo
Hi Guys
My GS3 is stuck at the boot logo. I've read and done all but with no luck,
First problem:
EFS error:
"Fake IMEI (usually 004999010640000)
Not registered to network
Fake Serial Number (usually 0000000)"
Now: stuck on boot logo.
I followed the forum for GT-i9500 thinking this would resolve my efs error. http://forum.xda-developers.com/showthread.php?t=2392632
I did the following:
1. installed PhoeniX.ROM.EFS.Backup.S4
2. Extracted the efs backup tar file & created a folder in the root called efsbackup & copied all extracted files to it.
3. Used Root Explorer to copy all files to the efs main folder. overwriting all.
4. Used the terminal:
su
busybox chown 1001:1001 /efs/nv_data.bin
busybox chmod 06755 /efs/nv_data.bin
5. rebooted.
nothing happened I was still stuck with the efs error
Now I entered safe mode, and nothing i could do, used the hold power button + restart.
now I'm in my second problem, stuck at the boot logo.
I can go to recovery & download mode....
Please help, i really need it hey
Use the link in my signature to navigate to the sticky roll-up thread. Look for the imei thread. Read it.
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Tried it , and didn't work
KiDo3Konvict said:
Tried it , and didn't work
Click to expand...
Click to collapse
Service centre paid for repair then
JJEgan said:
Service centre paid for repair then
Click to expand...
Click to collapse
that's the main problem , living in a 3rd world , means there's no service center here
gee2012 said:
As long as you can get in downloadmode you`re oke. Look om www.sammobile.com/firmware for the stock rom you need (country or region you live in) and flash it with Odin. See item 3 in my signature for a detailled tutorial how to do that. You might need a jig however, but try getting in downloadmode manualy for now.
Click to expand...
Click to collapse
I realize it's Saturday, July 26, 2014 - But I had this exact same problem a moment ago; I got out of it by flashing a different recovery with Odin v3.09. I've got soft bricked staring down "Recovery Booting" and that's it. I had download mode available, so went to CWM 6.0.4.5 from TWRP 2.7.1.0. I must admit I thought flashing my HTC Titan I via Goldcard was hard, but this is ridiculous which my SG3 has presented just to get something other than Android Recovery 3e. I got Knox disabled, the device rooted despite being 4.3, but it begs the question what's the point of updating to 4.4.x if going backwards becomes an act of God doing it. Update: Another attempt did not fix the booting problem; however it is a solution to get out of the recovery booting and boot into a normal startup and back to your phone being usable from whatever launcher you use (Nova in my case) It will return to normal startup once you do this if it becomes necessary to do so, which is a bit of a sigh of relief. I'm about at wit's end. One problem gets solved but the moment I ran Towelroot which really worked, new issues keep popping up. Is there a way to look at the bootloader or what OS update created this Knox monstrosity and made our lives much harder than it has to be. I don't mean to sound like I'm asking a stupid question but is there an apk or a procedure within whatever flavor recovery we use that will perform the equivalent of the Task29 we use to perform on the HD2, something that will wipe these devices down to their baby butts and start over; thanks?
Hey visit link sure it will work for you.
http://forum.xda-developers.com/showthread.php?t=1804117
Hit Thanks?
Sent from my GT-I9300 using XDA Free mobile app
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
:good::good::good::good:
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thank you son, God bless you. Sometimes, you simply forget about the simple tricks. Thanks again
Hi there,
I have a samsung galaxy s3 i9300 which I have cyanogen mod 10.1. I woke up one morning and it was stuck in a boot loop.
So I downloaded the latest update and gapps and stuck them on my sd card, booted into clockwork recovery. I wiped the user data, cache and dalvik and installed the latest cm and gapps and it's still boot looping.
Can anyone help? I have no money to buy a new phone...
I think the best option would be back to stock ROM
Or it's just a sudden death syndrome..
Factory reset and flash an official stock rom via odin, if you can still boot into recovery then you might have just a corrupt system partition (it happened to me once and a nandroid restore fixed it).
boomboomer said:
Factory reset and flash an official stock rom via odin, if you can still boot into recovery then you might have just a corrupt system partition (it happened to me once and a nandroid restore fixed it).
Click to expand...
Click to collapse
I'm using heimdall as I use kubuntu on my laptop.
I'm having the hardest time finding an md5 file that has the right files in it to use with heimdall. Technology hates me...
Had the same problem today!
Already told here what happened, going to quote:
I have a Samsung Galaxy S3 Gt I9300 16Gb for about a month and so far always worked without problems, and today, from one moment to another, I listen the phone to restart and when I look at the display was the boot image, just say "Samsung Galaxy S3 Gt I9300" and is flashing at intervals of 3 or 5 seconds without passing that boot image, just taking off the battery that it switches off. I'm desperate because I don't know why he had been so, or how to resolve the situation !
So I entered in ODIN MODE and pressed ''continue''
After that it appears on top left in tiny words the following:
Odin mode
Product name: GT-I9300
Custom Binary Download: Yes (6 counts)
current binary: Samsung official
system status: official
And appears in the middle the android logo and below ''Downloading... Do not turn off target!!''
EDIT: when I left the download mode by long-pressing the power button, before he tried to boot again appeared in the middle of the screen a grey battery with a grey circle inside, what is that mean?
I found a tumblr post with a tutorial for heimdall. It won't let me post links, so I'll have to put in spaces.
h ttp: // wildabdat.tumblr. com / post / 13450595781 / flashing -androidk- rom-on-l inux-wi th-no-odin-stoc
I've not been having much luck with it though, I keep getting : "Setting up interface failed!" and "Failed to initialize protocol!"
May work for you though.
Find a Windows pc and use odin to flash the latest rom for your country at sammobile. After that boot into recovery and factory reset.
boomboomer said:
Find a Windows pc and use odin to flash the latest rom for your country at sammobile. After that boot into recovery and factory reset.
Click to expand...
Click to collapse
that answer was for me or for the user Chibi ?
Chibi. You asked what the battery icon means. It means your phone is off but accepting power via usb
You should try factory reset
Sent from my GT-I9300 using Tapatalk 4 Beta
I just tried to flash the firmware with Odin and installed one from the links on the Guide Thread.
All the process was ok but when the phone reboots doesn't pass from the boot loop, stays in there and if I try to reset start do blink again.. help please
(can't enter in the recovery to wipe, only in download mode)
your efs can be corrupted
Glebun said:
your efs can be corrupted
Click to expand...
Click to collapse
what can I do to resolve the problem?
If it is corrupted, you can only save it with a backup otherwise its a service centre repair.
You should try and flash recovery via odin though, see if you can access. Probably not much else you can do.
Sent from my GT-I9300 using Tapatalk 4 Beta
Restore the EFS you backed up .
Or its a service centre repair .
jje
Tried flash via Odin and after the re-boot it stays with the same boot loop
Repeat its a service centre repair .
jje
gdiax said:
Tried flash via Odin and after the re-boot it stays with the same boot loop
Click to expand...
Click to collapse
Repair centre then
Sent from my GT-I9300 using Tapatalk 4 Beta
rootSU said:
Repair centre then
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
ok thanks.. It's in warranty, but, do I have to present the buying receipt ? Because I don't have it
But this is ridiculous, I spend a lot of money on a phone and 20 days later just bricks from nothing
it's exactly this that's happening on my phone:
http://www.youtube.com/watch?v=PBLbsazRfRs
The flash counter 6 will void your warranty. You can but try
Sent from my GT-I9300 using Tapatalk 4 Beta
So after some attempts to flash a stock ROM via ODIN, my phone wasn't being recognised by it, so I couldn't get it working even after installing drivers for my phone.
I don't have the $300+ to pay for a service repair centre to fix it, so I'm going to attempt to replace the mainboard myself.
My little S3 is dead to the world at the moment.
So its the first time im messing with that staff.i wanted to flash omega rom at my s3. i tried to install but nothing happened so i tried to wipe my cache settings. when i pressed that option my phone stucked. it shows me the galaxy screen, then boots and shows the android icon for a sec and then the same again forever. i put off the battery, powered on the phone and again that problem. Even when its closed and i want to charge it it wont show ths battery icon but will start that boot thing. any ideas?
Can you get in download mode? If so then flash stock Rom with Odin.....see the stickies at top of the s3 general forum for all basics
slaphead20 said:
Can you get in download mode? If so then flash stock Rom with Odin.....see the stickies at top of the s3 general forum for all basics
Click to expand...
Click to collapse
Did that, and as Odin programm said i had a succesful installation. Then my phone rebooted and started the same ... :/
Can you boot into recovery? If so, do a factory reset, that usually sorts looping after an Odin flash
slaphead20 said:
Can you boot into recovery? If so, do a factory reset, that usually sorts looping after an Odin flash
Click to expand...
Click to collapse
I cant. only download mode. and that happened to me when i tried to do a factory reset
Check the Rom you downloaded,redownload etc etc
slaphead20 said:
Check the Rom you downloaded,redownload etc etc
Click to expand...
Click to collapse
You mean the stock ROM?
The problem i face is that and i cant enter nowhere
Write at youtube: Samsung Galaxy S3 stuck on screen
From Κώστας Καράς. I uploaded it, that's the problem im getting. and cant enter recovery mode
You just said you can get in to download mode?
slaphead20 said:
You just said you can get in to download mode?
Click to expand...
Click to collapse
I CAN enter download mode. i CANT enter recovery mode.
I entered the download mode, and installed the stock rom via Odin, but nothing happened. I've still the same problem
xokeistas25 said:
.i wanted to flash omega rom at my s3. i tried to install but nothing happened
Click to expand...
Click to collapse
How do you mean nothing happened? What happens when you power on the phone after first time flashed the omega rom?
And what happens when you try to hold volume up+home button + power button?
Sent from my GT-I9300 using Tapatalk 2
xokeistas25 said:
I CAN enter download mode. i CANT enter recovery mode.
I entered the download mode, and installed the stock rom via Odin, but nothing happened. I've still the same problem
Click to expand...
Click to collapse
Like I said, check the Rom you downloaded to make sure it's ok, the right one for your region, and redownload just in case it's corrupt
Unuce said:
How do you mean nothing happened? What happens when you power on the phone after first time flashed the omega rom?
And what happens when you try to hold volume up+home button + power button?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
When i do that, it does NOTHING!
slaphead20 said:
Like I said, check the Rom you downloaded to make sure it's ok, the right one for your region, and redownload just in case it's corrupt
Click to expand...
Click to collapse
Just downloaded stock rom from another link, installed via Odin and when it rebooted, it started the same thing :/
xokeistas25 said:
When i do that, it does NOTHING!
Just downloaded stock rom from another link, installed via Odin and when it rebooted, it started the same thing :/
Click to expand...
Click to collapse
Now pull battery then insert and try and get in recovery, if you can, then factory reset
slaphead20 said:
Now pull battery then insert and try and get in recovery, if you can, then factory reset
Click to expand...
Click to collapse
As i told you before, i cant. As soon as i press the buttons, it will start that weird thing
Via Odin flash Philz recovery and boot into recovery format sd card system data cache via mounts and storage .
If you cannot then its a service centre repair job .
Are you sure its an I9300 phone check under the battery .
jje
Will you please link to the stock Rom you are trying to flash
xokeistas25 said:
When i do that, it does NOTHING!
Just downloaded stock rom from another link, installed via Odin and when it rebooted, it started the same thing :/
Click to expand...
Click to collapse
It can't do nothing..
When you press power button after flash omega rom, did it powered on?
Sent from my GT-I9300 using Xparent Blue Tapatalk 2
slaphead20 said:
Will you please link to the stock Rom you are trying to flash
Click to expand...
Click to collapse
I followed this guide http://forum.xda-developers.com/showthread.php?t=2187081
JJEgan said:
Via Odin flash Philz recovery and boot into recovery format sd card system data cache via mounts and storage .
If you cannot then its a service centre repair job .
Are you sure its an I9300 phone check under the battery .
jje
Click to expand...
Click to collapse
Flashed Philz recovery and now its just stuck in the Galaxy i9300 screen with a small red exclamation mark at the top, left corner of the screen, and it keeps rebooting. Still cant enter recovery mode, just download mode.
Unuce said:
It can't do nothing..
When you press power button after flash omega rom, did it powered on?
Sent from my GT-I9300 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
No, i said what's happening after that.
EDIT: A friend of my told me that, i need the appropriate firmware from here: http://www.sammobile.com/firmwares/1/
but with my phone being off i dont know how to find pda, etc
My phone turned off because of low battery, so I booted it normally and after 10 minutes the screen was still on and I couldn't unlock my screen. So i thought let's flash CWM make a backup of my files and do a factory reset. But it fails on flashing the CWM at least I can't access it but odin says it was flashed successfully. On the same thread it says that
There is an auto recovery restore system on stock roms that will reflash the Stock Recovery on a Stock Rom. If the restore files are renamed then CWM Recovery should not be overwritten after a reboot.
Click to expand...
Click to collapse
But I obviously can not rename the files because I can't access any of my storage.
I couldn't find any answers in the Internet.
I thought maybe I can flash a temporary recovery but I can't find anyone for the GT-I9300.
Is there any possibility to solve my initial problem or at least somehow get CWM succesfully flashed?
That is the post mentioned above: http://forum.xda-developers.com/gal...covery-clockworkmod-touch-6-0-3-2-gt-t1719744
____________________
My phone is a Galaxy S3 GT-I9300 International version
szoszk said:
My phone turned off because of low battery, so I booted it normally and after 10 minutes the screen was still on and I couldn't unlock my screen. So i thought let's flash CWM make a backup of my files and do a factory reset. But it fails on flashing the CWM at least I can't access it but odin says it was flashed successfully. On the same thread it says that But I obviously can not rename the files because I can't access any of my storage.
I couldn't find any answers in the Internet.
I thought maybe I can flash a temporary recovery but I can't find anyone for the GT-I9300.
Is there any possibility to solve my initial problem or at least somehow get CWM succesfully flashed?
____________________
My phone is a Galaxy S3 GT-I9300 International version
Click to expand...
Click to collapse
Did you have auto reboot checked? If so try unchecking it and re Odin the recovery, remove battery then try booting recovery. Idk if it'll work but it's worth a shot.
Sent from my SPH-L710 using XDA Free mobile app
PClouser said:
Did you have auto reboot checked? If so try unchecking it and re Odin the recovery, remove battery then try booting recovery. Idk if it'll work but it's worth a shot.
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you very much at least now I can access CWM I hope it'll solve my problem
szoszk said:
Thank you very much at least now I can access CWM I hope it'll solve my problem
Click to expand...
Click to collapse
I hope it works for you
Sent from my SPH-L710 using XDA Free mobile app