Install stock rom with stock recovery (bootloader relock) - HTC Desire X

Hello, i need help with install stock rom and stock recovery, relock bootloader. Please give me advice what you need to do to go relocked bootloader. Where to download stock rom and stock recovery to go relock bootloader?
Thank you for advice.
Sorry, my english is bad.

eventai said:
Hello, i need help with install stock rom and stock recovery, relock bootloader. Please give me advice what you need to do to go relocked bootloader. Where to download stock rom and stock recovery to go relock bootloader?
Thank you for advice.
Sorry, my english is bad.
Click to expand...
Click to collapse
I assume you are on JB so follow this: http://forum.xda-developers.com/showthread.php?t=2210619

GtrCraft said:
I assume you are on JB so follow this: http://forum.xda-developers.com/showthread.php?t=2210619
Click to expand...
Click to collapse
If you assume JB, you should have linked to this: http://forum.xda-developers.com/showthread.php?t=2324815
Your link goes to ICS backups...

dansou901 said:
If you assume JB, you should have linked to this: http://forum.xda-developers.com/showthread.php?t=2324815
Your link goes to ICS backups...
Click to expand...
Click to collapse
Sorry I thought I copied the JB link

I have CID: HTC_032, Where to download stock rom?

As the nand backup in the link I posted earlier is down, use this: http://forum.xda-developers.com/showthread.php?t=2239511
There, download stock ROM and flash it via recovery. After that, you have to install stock boot.img and stock recovery.img (also available for download in linked thread). Then, you can relock bootloader.

Related

[Q] HELP : Soft brick my phone after install chainfire

Guys, please help me.
I recently rooted it but haven't done nandroid backup yet, and i install chainfire 3d but then my phone won't pass the splash screen, after the htc logo it turns black. please tell me what should i do. i have H-BOOT 1.19, RADIO 1.12.11.0809, bootloader unlock, twrp installed.
Regards,
Deny A
den_piero said:
Guys, please help me.
I recently rooted it but haven't done nandroid backup yet, and i install chainfire 3d but then my phone won't pass the splash screen, after the htc logo it turns black. please tell me what should i do. i have H-BOOT 1.19, RADIO 1.12.11.0809, bootloader unlock, twrp installed.
Regards,
Deny A
Click to expand...
Click to collapse
flash a new Rom.
Sent from my EVO using Tapatalk 2
flex360 said:
flash a new Rom.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the quick reply, but i don't really understand which ROM should i flash. Can i just factory reset? and do the OTA?
Chainfire is not supported on our evos, you will soft brick every time. You have to flash a new Rom. Either flash a Rom and kernel separately or flash a Rom with kernel installer like meanrom
om4 said:
Chainfire is not supported on our evos, you will soft brick every time. You have to flash a new Rom. Either flash a Rom and kernel separately or flash a Rom with kernel installer like meanrom
Click to expand...
Click to collapse
om4, thank you for the reply. I've read your Dont' Panic thread, would it be possible to flash the boot.img alone? can i flash with the latest RUU ? or is there a latest stock ROM available, because i only get from search is the previous stock ROM
2.13 stock deodexed with root
om4 said:
2.13 stock deodexed with root
Click to expand...
Click to collapse
Thank you very much om4, the link in OP thread is dead but i can manage to find Captain_Throwback link.Do i need to relock the bootloader? and I still need to flash the kernel after i flash it with the deodex stock right?
If i decide to go with the mean rom, should i re-lock the bootlader or just straight flashing the rom after clean wipe and factory reset?
If you flash meanrom you don't need to relock bootloader. Only relock the bootloader if you are getting ready to flash ruu or if you are trying to accept an ota. To accept an ota you would need a stock Rom and recovery before relocking bootloader
om4 said:
If you flash meanrom you don't need to relock bootloader. Only relock the bootloader if you are getting ready to flash ruu or if you are trying to accept an ota. To accept an ota you would need a stock Rom and recovery before relocking bootloader
Click to expand...
Click to collapse
Thank you very much sir, you've been very helpfull. Thank you

[Q] From Revolution HD 6.2 back to stock

I have flashed Revolution HD 6.2 on my HTC One X+.
Now I want to go back to Stock but I don't know how. According to this Post I downloaded a file called "RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed" and tried to install it, but it tells me it cannot flash my device. What else can I do?
Please help!
htconexplus said:
I have flashed Revolution HD 6.2 on my HTC One X+.
Now I want to go back to Stock but I don't know how. According to this Post I downloaded a file called "RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed" and tried to install it, but it tells me it cannot flash my device. What else can I do?
Please help!
Click to expand...
Click to collapse
as always, run the RUU while the boot loader is locked. Make sure the device ID matches. If it is locked already unlock, flash your stock recovery RELOCK and try again.
This would be my 1st reply...
Can some one help me for this.
I do unlocked, flash boot, flash recovery (Failed alot of time due to not for ONE X+ version), now using TWRP to 2.3.3.0 (AT&T/Telus and INTL)
After that I want to flash custom ROM ( http://forum.xda-developers.com/showthread.php?t=1987885 ( Android Revolution HD 6.2 ), and flash the Boot.img for 6.x.
Then I not start flash custom ROM yet, and do NANDROID from TWRP.
So is that my boot.img is stock boot? Because I want keep NANDROID Backup.
And now I using HCT__044 1.17.707.1, found that RUU not available yet, so cannot get back from STOCK ROM.
Can someone upload this version for me for the boot.img if mine one is custom boot.img...
Thanks & Regards
xdacalvien said:
This would be my 1st reply...
Can some one help me for this.
I do unlocked, flash boot, flash recovery (Failed alot of time due to not for ONE X+ version), now using TWRP to 2.3.3.0 (AT&T/Telus and INTL)
After that I want to flash custom ROM ( http://forum.xda-developers.com/showthread.php?t=1987885 ( Android Revolution HD 6.2 ), and flash the Boot.img for 6.x.
Then I not start flash custom ROM yet, and do NANDROID from TWRP.
So is that my boot.img is stock boot? Because I want keep NANDROID Backup.
And now I using HCT__044 1.17.707.1, found that RUU not available yet, so cannot get back from STOCK ROM.
Can someone upload this version for me for the boot.img if mine one is custom boot.img...
Thanks & Regards
Click to expand...
Click to collapse
If you do a stock Backup you need to do it prior any rom or boot.img been flashed and keep it safe...
are you sure you are 1.17.707.1? can you post your hboot version etc
---------- Post added at 08:21 AM ---------- Previous post was at 08:12 AM ----------
htconexplus said:
I have flashed Revolution HD 6.2 on my HTC One X+.
Now I want to go back to Stock but I don't know how. According to this Post I downloaded a file called "RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed" and tried to install it, but it tells me it cannot flash my device. What else can I do?
Please help!
Click to expand...
Click to collapse
What is your CID? more info is always handy
kotag82 said:
If you do a stock Backup you need to do it prior any rom or boot.img been flashed and keep it safe...
are you sure you are 1.17.707.1? can you post your hboot version etc
Yes, I use CID Getter and fasboot getvar all
ENRC2B_U_JB_45
romver" 1.17.707.1
BootLOdder: 1.35.0000
Cid: HTC__044
Carrier: HTC-Asia-SEA-WWE
Baseband: 3.1204.168.32
I updated OTA till now without update Camera for today.
And few hours ago, I already root to ARHD 6.2.
Click to expand...
Click to collapse
kotag82 said:
If you do a stock Backup you need to do it prior any rom or boot.img been flashed and keep it safe...
are you sure you are 1.17.707.1? can you post your hboot version etc
Yes, I use CID Getter and fasboot getvar all
ENRC2B_U_JB_45
romver" 1.17.707.1
BootLOdder: 1.35.0000
Cid: HTC__044
Carrier: HTC-Asia-SEA-WWE
Baseband: 3.1204.168.32
I updated OTA till now without update Camera for today.
And few hours ago, I already root to ARHD 6.2.
Click to expand...
Click to collapse
To go completely to stock you need to flash backup you made prior flashing (if you did any) and flash boot.img from backup via fastboot... Only you need stock recovery more but... I can give you only from our WWE CID HTC__001
If you have no backup you need to wait for RUU
kotag82 said:
To go completely to stock you need to flash backup you made prior flashing (if you did any) and flash boot.img from backup via fastboot... Only you need stock recovery more but... I can give you only from our WWE CID HTC__001
If you have no backup you need to wait for RUU
Click to expand...
Click to collapse
Well, thanks for your help, but it still need stock recovery, without RUU, all is impossible right now..
Any time after updates to new firmware 1.14.xxx.x to 1.17.xxx.x, so the old stock 1.14.xxx.x RUU were unusable, am I right?
I search google also cannot extract from ROM.zip (RUU) yet too...
xdacalvien said:
Well, thanks for your help, but it still need stock recovery, without RUU, all is impossible right now..
Any time after updates to new firmware 1.14.xxx.x to 1.17.xxx.x, so the old stock 1.14.xxx.x RUU were unusable, am I right?
I search google also cannot extract from ROM.zip (RUU) yet too...
Click to expand...
Click to collapse
If you have that OTA which updated your hboot there is a stock recovery, why do you need to go to stock?
kotag82 said:
If you have that OTA which updated your hboot there is a stock recovery, why do you need to go to stock?
Click to expand...
Click to collapse
Just incase when it need to send warranty, keep the STOCK ROM for safe..
Still noob, alot of things need study...
if you need 1.17.707.1 http://forum.xda-developers.com/showthread.php?p=35958152#post35958152

is flashing back to official ics/gb rom will remove Clockworkmod CWM?

is flashing back to official ics/gb rom will remove Clockworkmod CWM?
and will your phone also be unrooted? all back to defaults settings?
please tell to some who knows
thanks
lilflix7 said:
is flashing back to official ics/gb rom will remove Clockworkmod CWM?
and will your phone also be unrooted? all back to defaults settings?
please tell to some who knows
thanks
Click to expand...
Click to collapse
Yes, flashing ftf "official" file ROM will remove CWM and new flashed ROM will has no root rights.
The same flashing with Sony PC Companion and SEUS.
ok thanks
lilflix7 said:
is flashing back to official ics/gb rom will remove Clockworkmod CWM?
Click to expand...
Click to collapse
Only if it's installed in the system, if you're bootloader is unlocked and you have a custom kernel with it, then no.
XperienceD said:
Only if it's installed in the system, if you're bootloader is unlocked and you have a custom kernel with it, then no.
Click to expand...
Click to collapse
so I should also flash the default kernel? is that possible and where can i get that?
then if i can flash to default kernel, so i can able to remove CWM after i also flash official tft roms?
and if i flash to official Rom will unlocked bootloader be locked again?
lilflix7 said:
so I should also flash the default kernel? is that possible to flash and where can i get it?
then if i can flash to default kernel, then flash after the official tft, will CWM remove now?
Click to expand...
Click to collapse
Flashing a stock ftf also flashes the stock kernel so yes it will be removed.
XperienceD said:
Flashing a stock ftf also flashes the stock kernel so yes it will be removed.
Click to expand...
Click to collapse
thanks but how about if my phone is unlocked bootloader then i flash official tft roms, will unlocked bootloader be locked again?
Your phone will return to stock as it just came out of the box if you flash the factory image via fast boot. Including kernel and recovery therefore, you will lose cwm. You can also lock up the boot loader again using toolkit.
Sent from my Galaxy Nexus using xda premium
thanks but what toolkit? I know some toolkit but i wanted to sure if toolkit u know is the same to mine
lilflix7 said:
thanks but what toolkit? I know some toolkit but i wanted to sure if toolkit u know is the same to mine
Click to expand...
Click to collapse
You can use this toolkit... Its the easiest
http://forum.xda-developers.com/showthread.php?t=1560613
yes
lilflix7 said:
is flashing back to official ics/gb rom will remove Clockworkmod CWM?
and will your phone also be unrooted? all back to defaults settings?
please tell to some who knows
thanks
Click to expand...
Click to collapse
yap
but u can always root again

[Q][SOLA]-Some questions about flashing stock ICS .54 from eXperience v.1.1 by Divaks

Hi guys, i've unlocked my bootloader and i've rooted. I flashed eXperience v.1.1 by Divaksh (stock based) and i want to return to stock ics 'cause i want to try cm9.1. Now the questions:
1- Will i have locked bootloader again?
2- Will i lost my root permission?
and the last: can i flash stock ics via CWM?
thank you :good:
Nope. Bootloader is independent of roms & kernels so you wont lose Bootloader unlock
But you'll always lose root if you flash Stock. And if you want to flash with cwm, see if anyone has uploaded a CWM flashable zip for the firmware. Else you need to use Flashtool
Hope it helps
Cheers
Min3r said:
And if you want to flash with cwm, see if anyone has uploaded a CWM flashable zip for the firmware.
Click to expand...
Click to collapse
So this: http://forum.xda-developers.com/showthread.php?t=2030261 would work just wiping and flashing with CWM?
Thanks for your help :fingers-crossed:
Yes I believe that ought to work fine
Enjoy
Cheers
Thanks man but the stock ics flashed by CWM and pc companion said me i had to update the system even if it was already .54 version and any attempt to update failed because of my unlocked bootloader. The same firmware flashed by flashtool didn't need any update and finally allowed my to boot "pure blood" ROM. Thanks anyway :cyclops:

quickest way to return to stock rooted 4.3

I would just like to return to stock rooted please help thank you
What are you on now?
do you have recovery?
Do you have a locked bootloader?
Do you want pure stock or would you consider a modified stock like DoggRom or monx
blueether said:
What are you on now?
do you have recovery?
Do you have a locked bootloader?
Do you want pure stock or would you consider a modified stock like DoggRom or monx
Click to expand...
Click to collapse
Im on monx 4.3 6806 , would like pure stock just rooted so ican run certain apps. Ihave unlocked boot and recovery
mrbigdreams09 said:
Im on monx 4.3 6806 , would like pure stock just rooted so ican run certain apps. Ihave unlocked boot and recovery
Click to expand...
Click to collapse
There's not much between DoggRom and stock, and that would be my preference, Just flash from recovery with a wipe
For pure stock you could read http://forum.xda-developers.com/showthread.php?t=2576006
Just flash .290 ftf for your device
then follow the first post.
blueether said:
There's not much between DoggRom and stock, and that would be my preference, Just flash from recovery with a wipe
For pure stock you could read http://forum.xda-developers.com/showthread.php?t=2576006
Just flash .290 ftf for your device
then follow the first post.
Click to expand...
Click to collapse
thank you for your help, just so i am for certain, wipe clean then flash .290 ftf then follow post? where could i find the .290 ftf? thank you
mrbigdreams09 said:
thank you for your help, just so i am for certain, wipe clean then flash .290 ftf then follow post? where could i find the .290 ftf? thank you
Click to expand...
Click to collapse
If you are going the ftf route then there is no need to wipe before hand, the options are in flashtool (I just use default)
FTF's can be found here http://forum.xda-developers.com/showthread.php?t=2453921
blueether said:
If you are going the ftf route then there is no need to wipe before hand, the options are in flashtool (I just use default)
FTF's can be found here http://forum.xda-developers.com/showthread.php?t=2453921
Click to expand...
Click to collapse
thank you , i very much appreciate it
mrbigdreams09 said:
I would just like to return to stock rooted please help thank you
Click to expand...
Click to collapse
Question for you. I have an unlocked Sony XZU C6806, running stock 4.3. I am trying to achieve root so I can flash custom roms. Do you know where I go for that?

Categories

Resources