Hey all!
I'm running the latest nightly hammerhead aokp and it seems it's unable to set it to ART, it stays on dalviq.
Is this temporary (as I imagine that it is designed not to allow ART at this time) or will aokp be able to run on ART later?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Make sure you don't use xposed.
Oh, is xposed preventing ART? There's no way of that working on ART then I take it, but AOKP does?
Thanks yet again MarcLandis!
Sent from my Nexus 5 using XDA Premium 4 mobile app
tried today to get ART and remove xposed in the process but it wont seem to work...
tried uninstalling xposed from the installer, tried to flash the xposed-disable-recovery zip, tried mkdir /data/data/de.robv.android.xposed.installer/conf/disabled.
all of those things seem to disable xposed and its modules but it still just ignores my selection of ART in settings and ends up as dalvic when its rebooted.
What am I doing wrong? and how is one supposed to get it done?
EDIT: got it working, had to disable persistence in rom control and then flash aokp.
Related
So since I updated from beans 11 to beans 12. Power amp has stopped working. When I launch it all it does is forecloses. Any thoughts would be appreciated
Sent from my SCH-I605 using Tapatalk 2
famous145 said:
So since I updated from beans 11 to beans 12. Power amp has stopped working. When I launch it all it does is forecloses. Any thoughts would be appreciated
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Clean flash or dirty??Tried clearing cache, fixing permissions? Have you tried uninstalling re-installing?? Did you check the music folder settings to make sure the correct folders are checked?
I did a dirty flash at first but went back to do a clean one. I have checked the music folder and uninstalled it. I will try fixing permission and other things
Sent from my SCH-I605 using Tapatalk 2
famous145 said:
I did a dirty flash at first but went back to do a clean one. I have checked the music folder and uninstalled it. I will try fixing permission and other things
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
after you clean flashed did you restore power amp from titanium backup or fresh install?
Restored it from titanium backup but then I deleted it because it wasn't working. But it still didn't work. I tried clearing my cache didn't do anything. How do I fix the permissions on the app?
Sent from my SCH-I605 using Tapatalk 2
famous145 said:
Restored it from titanium backup but then I deleted it because it wasn't working. But it still didn't work. I tried clearing my cache didn't do anything. How do I fix the permissions on the app?
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
you can fix permissions in whatever recovery you are using...twrp or cwr.
best bet may be to un-install it, reboot to recovery, wipe caches, fix permissions, reboot, re-install fresh from the playstore. That should definitely get you running. If not, you may have a bigger issue other than just power amp.
So I tried that and it did not work. I am running beans 12 with blue cheez theme and the addon for it
Sent from my SCH-I605 using Tapatalk 2
famous145 said:
So I tried that and it did not work. I am running beans 12 with blue cheez theme and the addon for it
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Not sure what else to suggest. I've never run the blue cheez theme so maybe something with the theme is conflicting. You could try a clean flash of B12 and install power amp first and see if it opens before adding any themes or mods, maybe narrow it down that way. Aside from that I'm out of suggestions but hope you get it. I'm a longtime power amp user and would have a hard time switching
Good luck
I've dirty flashed Beans 12 and I use PowerAmp with no problems. I don't use any theme, though.
JBeXX said:
Not sure what else to suggest. I've never run the blue cheez theme so maybe something with the theme is conflicting. You could try a clean flash of B12 and install power amp first and see if it opens before adding any themes or mods, maybe narrow it down that way. Aside from that I'm out of suggestions but hope you get it. I'm a longtime power amp user and would have a hard time switching
Good luck
Click to expand...
Click to collapse
I did a clean flash without any addon. What kernal are you using might be my problem
Sent from my SCH-I605 using Tapatalk 2
famous145 said:
I did a clean flash without any addon. What kernal are you using might be my problem
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
I'm on Saber and was on beans stock but I've never had an issue with any kernel and power amp(on any rom or device)
Just to be clear, when you are "clean flashing" you are wiping all including cache, data, and system correct?
Yes doing all of the steps. Everytime I click it to use it. It just shows the poweramp screen and then goes to whatever I was doing before
Sent from my SCH-I605 using Tapatalk 2
I gave up on PowerAmp myself.
I have the paid version & have never had the slightest problem before with it in many different phone/rom/kernel setups.
Now, running the Beans ROM (v2)/Perseus kernel setup listed in my sig, I can't get PA to display the song list panel anymore.
It will show my music folder on my 64gig card, but on the screen where it should say "songs" that listing is not even there.
I tried everything from fixing permissions, deleting & reinstalling the newest version from the playstore etc. etc.etc. and absolutely NOTHING worked.
It's really weird because both JetAudio & the stock music player work perfectly, so I finally said F it and deleted PA and use one of those apps.
My son is also a long time PA user (he has a Galaxy 3) and he told me has gotten away from using it lately also as some of the latest versions where giving him annoying FC and freezup problems and JetAudio works perfectly for him also.
Anyone wanna give this a shot, i dont have a recovery so im scared this could bork my device..
http://www.androidpolice.com/2013/0...samsung-devices-running-android-4-2-or-later/
Google play store.
https://play.google.com/store/apps/details?id=ma.wanam.xposed
What's the difference between this and the v12 nottach xposed mod?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
HORiZUN said:
What's the difference between this and the v12 nottach xposed mod?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Click to expand...
Click to collapse
From digging into it nottach quit the development and wanam took the project and continued it and updated it.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
/me deletes v12 nottach. Installs wanam
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Yeah, this has a few more tweaks than nottach so far, and some that didn't work before (Quick Setting tile number wouldn't work on my MF3 I337) are working now. Anyone is safe to install and tweak away as long as you're on stock/tw.
EDIT: nottach xposed does have a few more than this at the moment, I was wrong. Specifcally the full battery and headset notification I've noticed so far.
I'm not sure if this is related but after installing this i noticed my mobile connection would randomly switch to h+ in settings. I rebooted and got the padlock. Booted fine still and noticed an extra battery icon. I only enabled the module and looked at the options without checking or changing anything.
Uninstalled and rebooted. No padlock, no extra icon. Goldeneye MH1 with only scrolling cache and call record add ons.
So I really want to try this out but I have a quick question. As of right now im on MF3 and I am planning on rooting my phone. The only think I would like to be able to do is to have lockscreen widgets on my device while having security enabled such as a pattern lock or password. Will this give me the option to do just that?
blackguy101 said:
So I really want to try this out but I have a quick question. As of right now im on MF3 and I am planning on rooting my phone. The only think I would like to be able to do is to have lockscreen widgets on my device while having security enabled such as a pattern lock or password. Will this give me the option to do just that?
Click to expand...
Click to collapse
nothing will at this time that i know of.
Andrew149 said:
nothing will at this time that i know of.
Click to expand...
Click to collapse
aww damn ok. This is probably the only feature I want out of my phone to be honest lol
Airtioteclint said:
I'm not sure if this is related but after installing this i noticed my mobile connection would randomly switch to h+ in settings. I rebooted and got the padlock. Booted fine still and noticed an extra battery icon. I only enabled the module and looked at the options without checking or changing anything.
Uninstalled and rebooted. No padlock, no extra icon. Goldeneye MH1 with only scrolling cache and call record add ons.
Click to expand...
Click to collapse
Not sure why you getting this but no issues here working 100% on MF3 Stock my second SG4.
Sent From My Galaxy S 4 SAMSUNG-SGH-I337 Running On New Deadly Venom v8.0.0
blackguy101 said:
So I really want to try this out but I have a quick question. As of right now im on MF3 and I am planning on rooting my phone. The only think I would like to be able to do is to have lockscreen widgets on my device while having security enabled such as a pattern lock or password. Will this give me the option to do just that?
Click to expand...
Click to collapse
EDIT: read that wrong, disregard.
Venom0642 said:
Not sure why you getting this but no issues here working 100% on MF3 Stock my second SG4.
Sent From My Galaxy S 4 SAMSUNG-SGH-I337 Running On New Deadly Venom v8.0.0
Click to expand...
Click to collapse
Hey are you positive no issues im on stock mf3, but i have no recovery at all! so i dont wanna try this app and than get a soft brick.
Andrew149 said:
Hey are you positive no issues im on stock mf3, but i have no recovery at all! so i dont wanna try this app and than get a soft brick.
Click to expand...
Click to collapse
I am positive I have no issues at all my friend.
Sent From My Galaxy S 4 SAMSUNG-SGH-I337 Running On New Deadly Venom v8.0.0
Venom0642 said:
I am positive I have no issues at all my friend.
Sent From My Galaxy S 4 SAMSUNG-SGH-I337 Running On New Deadly Venom v8.0.0
Click to expand...
Click to collapse
thanks ill give it a shot.
Airtioteclint said:
I'm not sure if this is related but after installing this i noticed my mobile connection would randomly switch to h+ in settings. I rebooted and got the padlock. Booted fine still and noticed an extra battery icon. I only enabled the module and looked at the options without checking or changing anything.
Uninstalled and rebooted. No padlock, no extra icon. Goldeneye MH1 with only scrolling cache and call record add ons.
Click to expand...
Click to collapse
The extra icon does sound like something that a tweak/app like this can be responsible for.
Whether it's a one-time glitch or a bug that will recur, who knows.
blackguy101 said:
So I really want to try this out but I have a quick question. As of right now im on MF3 and I am planning on rooting my phone. The only think I would like to be able to do is to have lockscreen widgets on my device while having security enabled such as a pattern lock or password. Will this give me the option to do just that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2363189
this showed up in the xda news if you're still looking for something, i'd give it a shot
Can you run more than one module that offer similar functionality? Such as wannam and nottach, without causing problems? Which modules takes precedence?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
blackguy101 said:
So I really want to try this out but I have a quick question. As of right now im on MF3 and I am planning on rooting my phone. The only think I would like to be able to do is to have lockscreen widgets on my device while having security enabled such as a pattern lock or password. Will this give me the option to do just that?
Click to expand...
Click to collapse
3minit can do secure lockscreen widgets.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
I tried doing that specifically and did have some issues. Either enable the same tweaks in both or don't run both.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
---------- Post added at 03:54 PM ---------- Previous post was at 03:39 PM ----------
3minit isn't much of an option since you have to flash the framework and we can't through recovery (I think there is an app to flash without recovery, but it's risky business.)
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
I know it's not supposed to work. I wasn't expecting it to work. But I tried it anyways.
Slim Bean AOSP 4.3 ROM + Xposed + Wanam all seemed to install fine.
But a reboot or two later, before even selecting any option changes, ended up getting to where it refused to boot into the OS. Even after a factory reset.
Don't jump me, I know it wasn't *supposed* to work.
Guess I just confirmed that for the rest of the 4.3 AOSP guys?
The 12/27 nightly was running along finely for a couple of hours, changing settings and such. It froze after i changed a ringtone and now itll freeze after every bootup and sometimes it wont wake up. Then it will freeze within 1 minute after unlocking the phone. I correctly wiped/flashed everything cm11 coming from cm10.2 with latest kk-gapps and the latest ktoonz kernel. any ideas?
any know?
Sent from my SCH-I545 using XDA Premium 4 mobile app
Get rid of the custom kernel and try again
Sent from my SCH-I545 using xda app-developers app
Triscuit said:
Get rid of the custom kernel and try again
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Iflashed Kernel hoping the freezing would stop
Bump!
I'm facing the same issue with my Note 2 here. I flashed it using TWRP 2.7. Does anyone know if this makes a difference?
As CM 11 20140328 basically made my phone useless I wanted to switsch to Omnirom. As i did a full wipe and installed it, the phone crashed every few minutes. The display stood on though and pive wallpapers were still moving. So I went back to the latest CM 11 nightley and now my Phone keeps crashimg every few hours. But its just like with Omni. Display keeps on and stuff but I cant do anything. Im running Boeffla 2.2 kernelnand TWRP 2.7. I actualpy switched to TWRP because I thought it could help.
Every time i reboot i get the "android is updating, optimizing apps" screen. Is this an effect of the xposed framework and is it necessary that occurs every time i reboot? Its kinda starting to get annoying. Thanks in advance for the replies.
Btw. Im running 4.3 stock TW mk2
Sent from my SCH-I545 using Tapatalk
mhannah3333 said:
Every time i reboot i get the "android is updating, optimizing apps" screen. Is this an effect of the xposed framework and is it necessary that occurs every time i reboot? Its kinda starting to get annoying. Thanks in advance for the replies.
Btw. Im running 4.3 stock TW mk2
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
No that's not needed everytime you reboot. Xposed itself shouldn't be doing it. Are you running any mods that are wiping Dalvic cache on every reboot?
Sent from my unknown using Tapatalk
Im running the wanam module. Is that what's causing it? It only optimizes 62 apps on startup. When i use safestrap to wipe dalvik it then optimizes 250+apps.
Sent from my SCH-I545 using Tapatalk
mhannah3333 said:
Im running the wanam module. Is that what's causing it? It only optimizes 62 apps on startup. When i use safestrap to wipe dalvik it then optimizes 250+apps.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Well I can't be certain really. Maybe it'd be worth disabling whatever modules you are running and rebooting to see what happens. I'd try doing that then possibly going into SS and clearing all caches again. Reboot once more with modules disabled and see. At least then you may be able to rule xposed out. I haven't used wanam in a while so I don't know it there's an option that describes what you're going through.
Sent from my unknown using Tapatalk
mhannah3333 said:
Every time i reboot i get the "android is updating, optimizing apps" screen. Is this an effect of the xposed framework and is it necessary that occurs every time i reboot? Its kinda starting to get annoying. Thanks in advance for the replies.
Btw. Im running 4.3 stock TW mk2
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
One of the modified Wallet hacks did that to my phone. The APK was deodexed so it triggered the "android is updating" every boot IIRC.
k1mu said:
One of the modified Wallet hacks did that to my phone. The APK was deodexed so it triggered the "android is updating" every boot IIRC.
Click to expand...
Click to collapse
Thats gotta be my problem then. What did you do to fix it?
Sent from my SCH-I545 using Tapatalk
mhannah3333 said:
Thats gotta be my problem then. What did you do to fix it?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I uninstalled the Wallet apk.
When I go to developer options and change the runtime from Dalvik to ART it does not work. It asks me to reboot, after reboot it says it's still using Dalvik. Any ideas?
If you are using Xposed, it will not switch over. Xposed only runs on dalvik runtime. I uninstalled Xposed and still could not switch back over and had to format and start over.
Sent from my LGLS990 using Tapatalk
pdaddy said:
If you are using Xposed, it will not switch over. Xposed only runs on dalvik runtime. I uninstalled Xposed and still could not switch back over and had to format and start over.
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
Damn, the main thing I use on Xposed is the G3 Tweakbox, which I actually really like. Is switching to ART worth it?
I guess it just depends on how you use your phone. I bought the G3 Tweakbox app. I used it and found the same ART, Dalvik issue. The only reason I'm running ART is basically to test it out and see if I like how it handles. Xposed should support ART once Android "L" is released.
Sent from my LGLS990 using Tapatalk
I personally prefer the advantages of Xposed and G3 Tweaksbox. When I ran ART before we had root, my phone did appear to be smoother, but certain chromecast apps wouldn't work and I had freezing and rebooting issues.
ART and xposed should work sometime after the full release of android L.
Sent from my LGLS990 using XDA Free mobile app
comzee said:
Damn, the main thing I use on Xposed is the G3 Tweakbox, which I actually really like. Is switching to ART worth it?
Click to expand...
Click to collapse
I used art pre root, honestly I saw no real improvement or lack thereof.