Hello,
As the title says i require help in rooting a zoostorm playtab model 3305-1030, it apparently uses the rockchip 3066 [rk3066] i have tried the method described here http://forum.xda-developers.com/showthread.php?t=2363342 but for some unknown reason to myself the package is invalid for installation, so i tried to then go down the route of installing it via CWM but am unable to install CWM via sdcard, i would be ever so grateful if someone who has experience rooting such a device could help me out i am a newb with tablets but follow instructions very well.
Kind Regards,
Andy
please note that the tablet has 4.1.1 android version on it as stock.
BUMP!
Please i am so desprate to root this tablet, i have managed to find a set of usb drivers for it but am unable to get it to showup on the adb devices command i have tried everything, this truly is the worlds most unrootable tablet!! if anyone is intrested in a challenge then seriously this is it for you!
Related
How to root please?
Also, anyone know how to reflash this models firmware?
I think I stuffed 1 of them up trying to root.
Attached is a picture of the model.
Thank you. Have a nice day.
Hi there !
I have started a new thread on how to root spreadtrum devices here: http://forum.xda-developers.com/showthread.php?t=2165554
May be you could find a way to root yours.
I also need you to test an idea to root them, but I'm not sure if it will work.
Because you already have a bricked one, you can try this idea without risking your device (and maybe unbrick it by doing a backup of the others one and flashing this backup on it.)
How have you bricked it precisely ?
Spreadtrum SC6820
ElectronikHeart said:
Hi there !
I have started a new thread on how to root spreadtrum devices here: http://forum.xda-developers.com/showthread.php?t=2165554
May be you could find a way to root yours.
I also need you to test an idea to root them, but I'm not sure if it will work.
Because you already have a bricked one, you can try this idea without risking your device (and maybe unbrick it by doing a backup of the others one and flashing this backup on it.)
How have you bricked it precisely ?
Click to expand...
Click to collapse
Hi there, I recently got my hands on a Mobicel Titan, and after much unclear research, the best I can come up with is that it is a Spreadtrum SC6820a phone, hope I am on the right track. Anyway, my goal is to change the ROM on this phone as the software that Mobicel has bundled on their version of Android is way too much for the phone to handle. I have already rooted the phone using Z4Root successfully. Funny enough, the link you have is the very link I tried for the past week, I've tried ADB and Fastboot on both Windows 8 64bit and Ubuntu 12.10 64bit, and even ResearchDownload, all drivers were installed successfully, but when i try all methods to flash new ROM to the device, nothing seems to happen, even if I use ResearchDownload and follow instructions to the T, flash process doesn't start. After using fastboot to update CWM from Ubuntu 12.10, if I try to restart into recovery mode, it is then stuck on the Mobicel Logo. Is there a guide for the Mobicel Titan?
Hello,
I'm new to flashing and installing ROM on android phones.
I enabled root in this phone.
I wanted to install JellyBean 4.2.2.
After a long search on the internet and a lot of trying I decided to open a thread here.
My phone is Star N800 MTK6575 with Android 4.0.4.
When I tried to install ROM through recovery mode it showed me this:
"Failed to verify whole-file signature"
I tried to install ClockWorkMode Recovery without success
SP flash tool and Odin also disappointed me..
Could anyone help me please?
Maybe I did something wrong, can you please explain me step by step how to upgrade this phone?
Please help me, every answer will be appreciated.
Thank you!
P.S
I think I found the problem.
When I plug in my phone in the usb, when it's turn off and without the battery, I see it in the Device Manager appearing and then disconnecting.
I tried to change the Power Settings but it didn't help. Anyone faced this problem in the past and knows how to fix it?
HELP ME PLEASE :crying:
Hello dear friends,
I just recently purchased a Lenovo A830 due to it being a budget phone but now I am starting to regret it.
It came rooted I checked through (Root Checker) app, but it's mostly in chinese even after changing the language.
So I came across this custom rom recently and I am really interested to install it so I can get rid of the current stock rom.
Unfortunately I need to have clock world mod recovery installed, So I have been trying to install it through Flash tools v3.1304.0.119 -- it wouldn't detect even after installing the proper usb drivers which are ( MTK6589 Drivers ).
It did detect once and it went to a 100% in red and said something about checking the logs and that it wouldn't work cannot be specific about this because it's not doing that anymore it's just not detecting.
Can someone please try to help me and guide me to install CWM on my lenovo A830, It would be much appreciated.
Any help would be really appreciated.
Thanks.
Hello all at XDA!
I'm new here and to the Android OS. Got a " Pyle Astro PTBL92BC " for yule. (I bet you all have heard this before)
I managed to root it using " ROOTx " but now I want to Dive in to Custom ROMs and tweaks. I have been looking on the net, and found not much info about Pyle's Tablets at all.. looks like a Generic android tablet nothing special about it.
Have been reading and looks like I should install something like ClockworkMod Recovery but looking at CWM's site their is a lot of versions... I don't know how to find the right one for me.. So if and when I mess this up, I can fix it and not hurt my father in-laws feelings for bricking his present to me.
So what info do I need to find the right one? all I can tell you about is..
Model:
PTBL92BC
Android Ver:
4.0.4
Baseband:
1.5
Kernel:
3.0.8+ [email protected] #1
Build #: 913A.V2.10.TZX.R01.BT.eng.0826.1009
Thanks a lot!
Unfortunately, there is no custom recoveries for your device. With that being said, there really isn't much we can say about ROMs either.
Pyle help
I managed to root it using " ROOTx " but now I want to Dive in to Custom ROMs and tweaks. I have been looking on the net, and found not much info about Pyle's Tablets at all.. looks like a Generic android tablet nothing special about it.
Click to expand...
Click to collapse
Yes, I am a newb, but I thought ROOtx couldn't actually ROOT a device. Is this wrong? Could you explain further?
I have had success on rooting the device using the Kingo rooting tool for PC. I have rooted the device and now I am working on a CWM recovery for it which I have booted successfully into but haven't been able to mount sd card or anything correctly yet.
zonark said:
I have had success on rooting the device using the Kingo rooting tool for PC. I have rooted the device and now I am working on a CWM recovery for it which I have booted successfully into but haven't been able to mount sd card or anything correctly yet.
Click to expand...
Click to collapse
I was wondering how you got Kingo to recognize the tablet. Im having trouble getting windows to recognize the tablet once i put it in USB debugging mode. Do you have some Pyle USB drivers? Or is there a step im missing here.
Kingo "recognized" it once, but it was as a samsung galaxy so i assumed it would be bad to proceed with a Root when the program was assuming it was a different device. Any advice for me?
Thanks!
Help with Pyle Astro PTBL92BC
Hi, Next time I tried to turn on Pyle Astro PTBL92BC tablet, after trasfering files from other tablet by bloototh, it has got stuck on starting screen with the “Android” logo and it stays on it and does nothing more so I have to turn it off. It is not recognized when connected to pc either. What should I do to fix it? Is there a way to re install a fresh copy of Android?
Please, help!
I figured it out!!!
estebanhg1967 said:
Hi, Next time I tried to turn on Pyle Astro PTBL92BC tablet, after trasfering files from other tablet by bloototh, it has got stuck on starting screen with the “Android” logo and it stays on it and does nothing more so I have to turn it off. It is not recognized when connected to pc either. What should I do to fix it? Is there a way to re install a fresh copy of Android?
Please, help!
Click to expand...
Click to collapse
I was in the same situation after trying to flash some random CWM not compatible with this chinese tablet.
To reflash the original firmware on it you need the flashing tool: PhoenixUSBPro
AND
you need the firmware (.IMG) file . this one was provided to me by the manufacturer: PTBL9C
Image file only HERE
Only inconvenience is that it is not the one for the Bluetooth capable Tablet ( their mistake).
Once I have the one for the PTBL92BC ( bluetooth capable) I will update .
Instructions on how to use that tool is summed up in the picture within the file attached PTBL9C.
BUT
If you need clearer steps you can follow instructions HERE
---------- Post added at 05:10 PM ---------- Previous post was at 04:47 PM ----------
serik21 said:
I was wondering how you got Kingo to recognize the tablet. Im having trouble getting windows to recognize the tablet once i put it in USB debugging mode. Do you have some Pyle USB drivers? Or is there a step im missing here.
Kingo "recognized" it once, but it was as a samsung galaxy so i assumed it would be bad to proceed with a Root when the program was assuming it was a different device. Any advice for me?
Thanks!
Click to expand...
Click to collapse
Just follow these instruction from another thread in XDADev. : HERE
It works for that tablet. Now Once you have root you can install Super SU pro and set it as a native app.
i have an azpen a821 8 inch tablet running 4.2.2,i want to root it,but cant seem to find usb drivers or a custom recovery.i can get into factory recovery.i tried to use simple adb backup and it could not connect via usb no matter what usb mode i set the tablet too.i'm pretty new to android,the only thing i have rooted was a freinds atrix 2 which went without problems using cwm and a custom rom.thanks in advance for any help.
wow
this is an awesome site,but i cant believe noone has any advice.i got the usb drivers resolved by installing pdanet,also installed the adb with google android sdk and tools.have been messing around with dumping the rom but cant get a full backup due to its not rooted,although root checker says it is already.it new and i havent tried rooting yet but read somewhere that some are factory rooted.i guess im gonna try to root with uberizer,looks like the simplest way i have found,but looks like it supports a10 and a13 but some have posted it works.i have the file for 11 partition cwm for custom recovery as i have found thats what mine is.
i got it root by using adb to bush the rooting files tio the proper spots.sorry for the newbie questions,but i am new to this