so i was trying to go back to andriod from cyanogenmod and i accidently turned the device off while in download mode. now i am on the "firmware upgrade encountered an issure. please select recovery in Kies & try again."
upper left corner reads the following
ODIN MODE
Product name: SGH-m919
Current Binary: Custom
System Status: Offical
Knox Kernal Lock: 0x0
Knox Warrenty Void: 0x1
CSB-CONFIG-LSB: 0x30
Write Protection: Enabled
eMMC Burst Mode enabled
START [224,1440]
SW EV, Check Fail : fused: 4 binary: 1
Do you have a recovery like CWM Recovery installed ?
Try flashing cyanogen mod again and then use odin to go back to stock rom.
Related
hello
my phone is stuck in odin mode. the phone was rooted before, but i had a friend try to unroot it. he says everything hes tried didnt work.
all i see on my screen is
odin mode
product name: sch-i545
current binary: samsung official
system status: custom
knox kernel lock: 0x0
csb-config-lsb: 0x30
write protection: enable
eMMC BURST MODE: enabled
how do i fix this?
Bone up on odin. Many threads and YouTube videos
sent by safestrap enabled bajarom
Hi there guys,
I recently bought an Samsung Galaxy S5 SM-900F that came already rooted with Cyanogen CM12.1 (cm-12.1-20150806-NIGHTLY-klte), using CWM Recovery Philz_touch.
When i was trying to make the updates through OTA, i was never able to update the firmware it was always displaying the old one on the informations of the phone. So i updated the firmware throught CWM Recovery Philz Touch manually, everything was ok, after that i thought to change the Recovery method to the TWRP latest version, it seemed ok that i suceeded.
However when i try to enter recovery mode i can't i'm always stuck with the ODIN mode saying Custom Rom and Knox 0x1 and does not let me to enter into recovery staying always in "Download Mode" .
Could Not Boot
Odin Mode
Product Name: SM-G900F
Current Binary: Custom
System Status: Custom
Know Warranty Void: 0x1 (2)
qualcomm secure boot: enable (csb)
AP SWREV: S1, T1, R1, A1 and P1
UDC START
Down there is information of the firmware and kernel installed on the device at the moment.
Galaxy S5
SM-G900F
Android 5.1.1
G900FXXU1ANJ1
Verson CyanogenMod = 12.1-20150806-NIGHTLY-klte
kerner version = 3.4.0-cyanogenmod-g0e5afc9 [email protected] #1 Thu Aug 6 00:38:38 PDT 2015
build number = cm_klte-userdebug 5.1.1 LMY48G b33df4b0c1 test-keys
LinuxSE State = Forcing
I also done throught ODIN the installation on CF-Auto-Root-klte-kltexx-smg900f to be able to enter to recovery but when i enter it appears in red when entered on the recovery:
Adroid System Recovery <3e>
KOT49H.G900FXXU1ANCE ->
But the information of my version base band on the Phone Information is:
G900FXXU1ANJ1
If i try to install any of the recovery modes TWRP or CWM through ODIN i will the get always stuck in DOWNLOAD MODE and i neet to install again through ODIN CF-Auto-Root-klte-kltexx-smg900f so i can enter to recovery :
Could Not Boot
Odin Mode
Product Name: SM-G900F
Current Binary: Custom
System Status: Custom
Know Warranty Void: 0x1 (2)
qualcomm secure boot: enable (csb)
AP SWREV: S1, T1, R1, A1 and P1
UDC START
Can you please advise me what can i do to overcome this and install a custom recovery to update firmware in the future?
Best Regards,
Hi there,
Im new to the whole rooting and unrooting thing. About 2 weeks ago i successfully rooted my Samsung Galaxy S6. Yesterday afternoon I rebooted my phone after "unrooting" it with SuperSU. After the reboot it got stuck in a boot loop and I dont know what to do. I tried to reflash a stock firmware with Odin but everytime it fails. I tried to hard reset the phone using TWRP recovery and no go. Here is some info:
Phone: SM-G920F
Has TWRP recovery.
On odin screen (phone) it says this after the Odin flash fails.
ODIN MODE
PRODUCT NAME: SM-G920F
CURRENT BINARY: CUSTOM
CURRENT STATUS: CUSTOM
REACTIVATION LOCK: OFF
SECURE DOWNLOAD : ENABLED
KNOX WARRANTY VOID: 1 (0x0500)
AP SWREV: B:5 K:2 S:2
SW REV. CHECK FAIL. DEVICE: 5, BINARY: 1
If you need any additional information just tell me and I'll provide it. Any help is appreciated.
Thanks,
Steven
Hi,
I can't use my tablet anymore tried Odin to re-install the origin firmware "SM-T825Y_1_20180122165040_zf84f94qoe_fac.zip" (new android 8 stock ROM) but it fails, Odin shows the transfer has PASSED but I still get this message in the screen:-
"Security Error: This device has been flashed with unathorised software & is locked.
Call your mobile operator for additional support. "
I wasn't planning flashing a custom ROM the only thing I did is put OEM Lock on, not sure why I did that.
When I put in Download Mode it shows this in the screen:-
ODIN MODE [High Speed]
PRODUCT NAME: SM-T825Y
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FAP LOCK: ON
OEM LOCK: ON
DID: 03EA1E00AE16
WARRANTY VOID: 0x1 (Ox20C)
QUALCOM SECUREBOOT: ENABLE
AP SWREV: B3 (1, 1, 1, 1, 1) K2 S2
SECURE DOWNLOAD: ENABLE
CCIC: S2 MM005 HW: 4
BOOT: 6 MAIN: DS
Regards,
Sal.
1. It's FRP not FAP ya perv.
2. Reflash firmware with odin, do not go into download mode afterwards before 3.
3. The rest watch this video carefully, and next time you want to leave your device stock, leave it stock, if you want to install a custom rom or twrp, do not have auto reboot ticked.
4. here is link ---> https://www.youtube.com/watch?v=o0T-CR-KpfM
I did reflash with odin but I still get this message "Security Error: This device has been flashed with unathorised software & is locked.
Call your mobile operator for additional support. " There is another small message on top , "Custom binary blocked by FRP. (boot.img)"
Odin tells me its PASSED but the Tablet still says its locked FRP and OEM locked .
In download mode I am getting same info.
I just went to the Samsung Shop and they fixed it for free, they said they just put a new firmware not sure how they did it but I tried it myself with latest firmware but I couldn't get rid of the lock, I am missing something? like software? or just not enough info about about getting rid of locks?
I had the same issue after i installed a Xposed module. Had to reflash Pie Bootloader and Rom via odin. Now it boots, but i can't flash twrp anymore... It always fails.
hello, fellow ROMers
My galaxy s4 (jfltevzw, sch-i545) was rooted when I received it. not knowing about the MDK cutoff, i tried to install a custom rom. I can occasionally get Download mode to work AND when I do, I get this :
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SCH-I545
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
CSB-OEM_CONFIG_LSB: 0X30
WRITE PROTECTION: Enable
And when i try to flash recovery, in red it says: START [224, 1440]
And in green: SECURE CHECK FAIL : recovery
trying to boot into recovery, in red,
SECURE FAIL : KERNEL
Followed by the yellow triangle and the message about taking it to a Verizon store
Last I was able to check i am on PL1.
cannot get to boot. tried flashing stock firmware and kernel
tried kies....won't take my model name
tried Verizon tool and it did not recognize the device
tried unroot.zip and rebranded it as unroot.zip.tar, so I could try to flash with odin (3.07, 3.09, 3.10.1, 3.12, 3.14, 3.14.4, etc) basic boot attempt with power key results in same message as trying to boot recovery
when download mode won't load I get : SECURE FAIL : KERNEL followed by UNKNOWN UPLOAD UPLOAD MODE
Any guidance would be gangbusters...
Did you try a factory reset in recovery?