my galaxy GSG2 keeps trunung off or turn of very fast ..
it says working somtimes 20 minute to one hour
i tried :
1. checked the power button
2. i reset it sevreal time (hard reset )
3. tried 2 diffrent wireframes
4. tried replace the battery ..... chargin is fine
5. usb port.is working fine 100
6. no "battery overheating" symbol. or somthing similar
7. used it for one day with no apps
all this didnt work
tariqyosef said:
my galaxy GSG2 keeps trunung off or turn of very fast ..
it says working somtimes 20 minute to one hour
i tried :
1. checked the power button
2. i reset it sevreal time (hard reset )
3. tried 2 diffrent wireframes
4. tried replace the battery ..... chargin is fine
5. usb port.is working fine 100
6. no "battery overheating" symbol. or somthing similar
7. used it for one day with no apps
all this didnt work
Click to expand...
Click to collapse
Try flashing a diff Stock Firmware of i 9100 (ICS 4.0.3 / JB 4.1.2 )for now via ODIN and see
still but there is a change
Sun90 said:
Try flashing a diff Stock Firmware of i 9100 (ICS 4.0.3 / JB 4.1.2 )for now via ODIN and see
Click to expand...
Click to collapse
i cleand the phone from inside the phone kept working for one day ... and when i start to recharge it begain to turning off
Related
Today i flashed the update over Kies. After finishing this procedure i install superuser again and reboot.
- crappy WLAN (connect / disconnect / cant connect ....)
- Freezetime Sleep (if i lock the phone, the display needs about 5 seconds to turn off)
- Freezetime Wake up (if i unlock the phone, the display turns on, ok, but i cant do anything, i needs to 10 seconds before u can do something)
can anybody help me to get this freeztime fixed ???
So what update ????
Did you try a factory reset ...
Or flash stock rom to suite from stock rom threads .
jje
Reflash stock rom and do a factory reset and then update again.
Casanoaa said:
Reflash stock rom and do a factory reset and then update again.
Click to expand...
Click to collapse
kk i will try this :/ no other chance to use the phone so i have to do this
i flashed via kies the latest update I9300XXBLG8 i guess oO cant move to menu or somewhere else :/
Hello,
I have a very big Problem. I was using SuperNexus ROM for my GS2 but because the system crashed sometimes and it was pretty unstable I wanted to go back to Stock ROM. So I downloaded the latest ROM for my GS2 from this site, the Official ROMs the newest one from Nordic Countries. Everything was fine and I also unpacked the zip and had the .tar.md5 so I opened the newest Version of Odin which was also attached to the Thread at the bottom and connected the device normally everything worked fine with no problems. Well I put the file in the PDA field and I checked Auto Reboot and F. Reset Time and clicked Start. It flashed everything normally with no Problem also it said at the end Success but then my phone rebooted and now it only shows me the Samsung Galaxy S II logo and it cant go any further I also cant get anymore in the Flash Menu with Volume Down + Home + Power what should I do???
Kind regards
alexj
*Fixed* I took out the battery for 5 Minutes and tried Download Mode again and then I flashed it again. Now it works perfect
Hi, I have a Galaxy S2 (I9100) that's on a stock rom GB 2.3.4
The kernel is KH3.
Phone works fine, but I cannot update to higher android version because KIES says my device cannot be updated with KIES.
After searching these forums I managed to root my phone (flash a rooted kernel with ODIN) and installed a custom rom.
I tried MIUI rom (JB) and also ParanoidAndroid (JB) and both have the same problem.
The screen shuts off after the 30 sec setting, but then after 1 sec it's ON again.
After 30 sec its shuts off, and after 1 sec it's ON again
If I flash a stock rom back (KH3) the everything is fine again.
Also flashed a MIUI ICS rom, which has the same problem!!
Anyone heard of this problem before, or knows what to do??
1. Did I do something wrong?
2. Is there a way to go to ICS stock rom (KIES or another way)?
Please help....
1. Flash a different kernel
2. Or go to Sammobile and download stock firmware, flash it with Odin.
Sent from my deep fried potato
Did you do full wipe before flashing a custom rom?
Yary12 said:
Did you do full wipe before flashing a custom rom?
Click to expand...
Click to collapse
I did
- factory reset
- wipe cache
- wipe dalvik
Then install rom
if custom rom - screen on after 1 sec.
if stock rom - screen normal
************************** UPDATE **************************
Flashed a stock kernel from SAMMOBILE (Latest ICS 4.04 for Netherlands) with ODIN
Same problem !!! Screen turns off after time out, 1 sec then turns on again..
I found that with this firmware an app called "Screen Off And Lock" was installed.
Does that mean that Samsung knows the problem occurs in ICS (and higher).
I checked the option with the delay especially for devices tjat turn screen on again after turn off,
but still the same problem stays.
******** ANOTHER UPDATE *********
Just found out....
Everything works OKAY if I connect the phone to my PC.
It's charging then offcourse, and the USB is connected then.
That must be a clue to the solution, but I haven't found it yet.
Maybe someone else has an idea now (I really hope so)
ferjen said:
******** ANOTHER UPDATE *********
Just found out....
Everything works OKAY if I connect the phone to my PC.
It's charging then offcourse, and the USB is connected then.
That must be a clue to the solution, but I haven't found it yet.
Maybe someone else has an idea now (I really hope so)
Click to expand...
Click to collapse
Maybe your usb port is f*cked like mine, Does it happen only when you fully charged the phone ? becuz my device recognize it as charging(when not having a charger connected), ---> so connecting/disconnecting every time . . My screen goes on/off cuz it connects/disconnects the charger (while no charger connected.) If this is your problem u can try cleaning usb port or check this post http://forum.xda-developers.com/showpost.php?p=30290884&postcount=3619
Unexist6969 said:
Maybe your usb port is f*cked like mine, Does it happen only when you fully charged the phone ? becuz my device recognize it as charging(when not having a charger connected), ---> so connecting/disconnecting every time . . My screen goes on/off cuz it connects/disconnects the charger (while no charger connected.) If this is your problem u can try cleaning usb port or check this post http://forum.xda-developers.com/showpost.php?p=30290884&postcount=3619
Click to expand...
Click to collapse
I don't think this is the same as my problem, because in GingerBread everything is OKAY...
Thanx anyway.
I had loaded 1 custom rom (cm-10-20131007-NIGHTLY-urushi ) after try to kitkat rom (AORP - 4.4.20 - BETA#1 - Ray). I use 10 days without any problem. My battery run out to %0. I connected pc by usb cable when phone turned off. The phone itself has made something. After that phone can't open, stuck at bootloader. I try to something but i can't fixed.
1) I flash same rom and kernel, but nothing changed.
2) I turn back stock rom ' 2.3.4 and 4.0.4' with tft, buth nothing changed.
3) I turned back (cm-10-20131007-NIGHTLY-urushi.zip) room. and phone opened but touch panel didn't work. I try all function with pc mouse. Every function run witout problem except for touch panel. I try diffrent kernel 4.1.2 but result same.
4) I sent mechanics. They try jtag but they didn't connect jatg
I hope I could tell properly. Thank you in advance
Hello Devs,
I have problem charging my s3 international version.
My phone is rooted and running custom rom s5 sensation v4.0 kitkat 4.4.2 with boeffla kernel v6.0 and latest CWM touch recovery.
I have flashed many custom roms before and all was working good before. The phone was also charging properly before.
But after some time when 4.3 was released I have flashed s4 revolution.
After flashing that rom my problem started.
1st problem was the phone was not gettin connected to my cell tower. Later after searching soo many hours on google I found out that it changed the efs version from v1 to v2. So I found out a rescue zip file which include only modem of xxemg4. I flashed it and then all was working good.
After some time I faced a problem of reverse charging means the phone is kept on charge but instead of charging the battery decrease. So again I searched on google about my problem and found out an app called galaxy charging current which show the power that is getting the phone while its connected to the charger. when I installed it and saw the current it was only showing max 100 min 999 and avg 100. I saw some where that the default current the phone should get is 1000 in max.
I searched alot on google on how to solve this problem, tried many diffrent rom , tried changing my charger, tried to flash back the previous rom which I was using in which I was not having any problem but after doing all this the result was same.
when I connect to the charger it shows 700 In max n after some time it keeps going down like 500 then 300 then last 100.
So after searching on google I have found out a solution of flashing custom kernel. I flashed googymax kernel in which using sTweak we can configure the battery power and ignore safety measures and unstable power.
After doing that my phone gets max 1000 min 1000 and avg 999.
My problem is that when ever I flash new rom I hav to flash custom kernel to ignore the unstable power and safety measures to properly charge my phone.
is there any way I can get back as before I was charging my phone without flashing custom kernel...???
Any answer will be appreciated.
Note :- I was using the original charger which I got in the box while purchasing.
First replace your battery, charger and lead, then flash full stock firmware with Odin.
What happens when you attempt to charge the phone completely off. Do you see the charging graphic?
If something is wrong with the micro-USB port then a wireless charging solution might be your only option.
You could try reloading the firmware using the Kies software on your PC - here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)
Thnaks for your rply
boomboomer said:
First replace your battery, charger and lead, then flash full stock firmware with Odin.
Click to expand...
Click to collapse
1st of all thanks for replying on my query.
As u stated to change the battery, Charger, Lead and to full flash stock firmware.
I already did that.
I have tried my friends battery with his charger ( not the 1 which come in box ).
but then also its the same.
Whats the problem in it.
Is it a software fault or hardware fault....???
Hermosa said:
What happens when you attempt to charge the phone completely off. Do you see the charging graphic?
If something is wrong with the micro-USB port then a wireless charging solution might be your only option.
You could try reloading the firmware using the Kies software on your PC - here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)
Click to expand...
Click to collapse
Thanks for the reply.
When I try to charge my phone when completely off, 1st it was showing me the graphics of battery charging when I was using 4.3 Custom Rom. But since I flashed my phone with 4.4 Custom Rom, I can't see the graphics of charging battery now.
As per your overview above I have tried all the possible ways to get back charging work properly ( your overview was also included in it ) but I dont get any success in it.
Now I have to compulsory flash custom kernel which supports the options of ignoring unstable power and safety measures.
But then also I will try to do what you told me.
Once again thanks.