Hi .
After installing the recovery 6.0.4.4 on my s3 , i've noticed that it was a galaxy s4 version , after that i came back to recovery 6.0.3.2 version for s3 and flashed a rom , now i observe that my touch screen it's not working in recovery menu and also i can't pass from the language selection ( you know after flashing a new rom) . May you help me to solve these problem?
Sorry for my bad english .
Usually you need a new digitizer after flashing wrong file.
The digitizer problem is a bit on the extreme. Just try flashing stock firmware through pc via odin. If that doesnt fix it, you may need to send your phone for repair.
Ok , so my touch screen problem still persist after flashing a new rom , how can i remove root completely and send it to warranty ? ( if this solution exist ) , did they take it in warranty for my touch screen problem ?
Blizing2014 said:
Ok , so my touch screen problem still persist after flashing a new rom , how can i remove root completely and send it to warranty ? ( if this solution exist ) , did they take it in warranty for my touch screen problem ?
Click to expand...
Click to collapse
>> http://forum.xda-developers.com/showthread.php?t=1710613 <<
Related
First hello guys..its just my 2nd post here anyways . i have a huge problem that i fully bricked my galaxy s3
My problem is that am stucked at samsung logo black screen and i can't do anything more ( can't enter downlload mode ...can recognize my phone on pc so i can use odin or fully reset it or something)
My bigger problem is that i lose my warrenty because my phone is rooted and flashed
Note: this problem happens while i was trying to flash cm10 and i did something wrong on rom manager thats why that all happens
Srry for my bad english and big talk and thx in advance
donsemaryy said:
First hello guys..its just my 2nd post here anyways . i have a huge problem that i fully bricked my galaxy s3
My problem is that am stucked at samsung logo black screen and i can't do anything more ( can't enter downlload mode ...can recognize my phone on pc so i can use odin or fully reset it or something)
My bigger problem is that i lose my warrenty because my phone is rooted and flashed
Note: this problem happens while i was trying to flash cm10 and i did something wrong on rom manager thats why that all happens
Srry for my bad english and big talk and thx in advance
Click to expand...
Click to collapse
perhaps a USB Jig may be of use to you in this situation to get you to download mode (Check my sig if you need a USB jig)
once you go to download mode, you can get to flash a stock firmware from odin
cheers!
By bricked doesn't that mean it's better off at a repair shop?
Since you can flash through odin. Tried flashing stock fitmwares? there's a site where you can download them.. Google.
Bricked ??? the OP may just be saying fully bricked without knowing .
Service job is paid for no warranty .
OP does not mention recovery mode .
jje
just try to go to samsung center and they will give their warranty. because they can get into download mode too so they can check your binary count dude
Hi guys , I was reading whole evening about my problem and I still cant solve it .
I flashed cyagenMod on my huawei ascend y300 but i wasn't following any rules about " how to flash " . Now my phone is stucked at loading screen ( this cyagen animation when I turn on my phone ) and I really dont know what to do ( newbie here ) so please help me ?
Is there a way to recover my phone ( something like system restore in windows or similar ) or to somehow format phone via computer ?
Thanky you !
hey
OmarTz said:
Hi guys , I was reading whole evening about my problem and I still cant solve it .
I flashed cyagenMod on my huawei ascend y300 but i wasn't following any rules about " how to flash " . Now my phone is stucked at loading screen ( this cyagen animation when I turn on my phone ) and I really dont know what to do ( newbie here ) so please help me ?
Is there a way to recover my phone ( something like system restore in windows or similar ) or to somehow format phone via computer ?
Thanky you !
Click to expand...
Click to collapse
Go into recovery and wipe the big 3 (system,cache and dalvic) and flash another rom..if there are no other roms, you need to go back to stock..
Hi All,
Sorry if i am posting in wrong section .
My Galaxy S2 Gt-I9100 stuck in Boot loop , its happening all the time with out power on button pressed
I am able to go Recovery and download mode . Recovery mode Error Msg - Failure cant mount E:Efs
I have nandroid full back up restoring also not solving problem
I did Stock ROM flashing still issue there .
I visited Samsung store they said Mother board is gone . i am not sure they are telling truth .
Please help me what i have to do to make my S2 work again .
Thanks
Braj
erbraj said:
Hi All,
Sorry if i am posting in wrong section .
My Galaxy S2 Gt-I9100 stuck in Boot loop , its happening all the time with out power on button pressed
I am able to go Recovery and download mode . Recovery mode Error Msg - Failure cant mount E:Efs
I have nandroid full back up restoring also not solving problem
I did Stock ROM flashing still issue there .
I visited Samsung store they said Mother board is gone . i am not sure they are telling truth .
Please help me what i have to do to make my S2 work again .
Thanks
Braj
Click to expand...
Click to collapse
if have you cleared the root counter using triangle away and phone is in warranty giv to the service centre else try flashing the pit file change kernel and try restoring
erbraj said:
Hi All,
Sorry if i am posting in wrong section .
My Galaxy S2 Gt-I9100 stuck in Boot loop , its happening all the time with out power on button pressed
I am able to go Recovery and download mode . Recovery mode Error Msg - Failure cant mount E:Efs
I have nandroid full back up restoring also not solving problem
I did Stock ROM flashing still issue there .
I visited Samsung store they said Mother board is gone . i am not sure they are telling truth .
Please help me what i have to do to make my S2 work again .
Thanks
Braj
Click to expand...
Click to collapse
Sorry for quoting the op
Flash stock rom
Then go to stock recovery
Wipe data
Reboot..
Let me know if this works
Solved now
Hi all
thanks for all,
I got the solution , i Flash bootloader with odin.
Now my phone is stared but not getting able to register in Mobile network , seems my IMIE number is lost ,
I have old nandroid backup i am going to restore to store my IMIE
Thanks All for your help
Hate to break it to you, but restoring a nandroid isn't that likely to bring your IMEI back. If you're very lucky, flashing a stock rom for your country/carrier (if you're already running one, flash others) might bring it back if it's a case of temporary IMEI loss. If not, many mobile repair shops (not Samsung service centres) should be able to write the IMEI back to the device relatively cheaply. And if not, a Samsung authorised repairer can do it (or they may replace the motherboard which has already been suggested to you), but that can obviously be somewhat expensive.
Or if lucky op might find a efs backup somewhere in internal memory
Hi,
I tried to Flash My phone with SP Flash Tool : Clone S5 G900H MT6571 with this ROM : s5-mtk6571-sm-g900h-hard-work-by-tonymananpa from needrom.com
Before I Flashed It , it was totally dead, after the Flash it make sounds when I touch the screen , but the problem is my screen is Black , I don't know why.
I need your help please. :crying: :crying: :crying:
Same here
I have the same problem, in fact, mine gets detected by the computer after i successfully flashed the rom. However, i am thinking it has something to do with kernel ver. Did you manage to get it fixed
Dreysus said:
I have the same problem, in fact, mine gets detected by the computer after i successfully flashed the rom. However, i am thinking it has something to do with kernel ver. Did you manage to get it fixed
Click to expand...
Click to collapse
No , If you have a solution please inform me
Hello
Well guys , I have Jiayu G6 (mtk6592) , had to flash Stock Rom , but mistakenly downloaded and flashed Jiayu S2 (mtk6592) firmware .
the phone went Dead , then i downloaded and flashed the right Firmware for G6 . now its working fine but the touch screen messed up , when i click on something it will respond somewhere els ..
Flashed the stock recovery with sp flash tool , i tried all Stock recovery available for this device and same problem , i tried Restore my TWRP Backup but the touch screen problem did not fix ..
I have the whole backup which i made before flashing the S2 firmware ( see image attached ) .. but do not know what to do ?
any idea?
i do not know if the S2 Kernel burned something on the Mainboard .. i do not know if buying new touch screen will fix it or not