after flashing pantom kernel v1.1b on my xperia P it wont boot.. it wont charge as well..
response of my phone:
when i plugged in the charger the led indicator turns red then it after 2 to 3 seconds, the led indicator will off.
when i press down the power button and the volume up, the led indicator turns violet.
when i press down the power button and volume down, the led indicator turns green.
any solutions?
thanks
Something went wrong on flashing the kernel I suggest you flash another kernel or flash back original firmware or flash back stock kernel @akosipolan
Theliakos said:
Something went wrong on flashing the kernel I suggest you flash another kernel or flash back original firmware or flash back stock kernel @akosipolan
Click to expand...
Click to collapse
thanks for the reply mate, i downloaded the stock firmware, and i already installed the flashtool, how do use the flashtool to flash back the stock firmware, when my phone doesn't turning on?
any suggestions/idea?
thanks
Well you press the lightning and then flasmode you go to the folder were the firmware is and you press flash! You wait then a pop up will come out! you will press the down volume and them insert the usb the led it will become kind of green and then wait make sure you have installed drivers in driver folder
akosipolan said:
thanks for the reply mate, i downloaded the stock firmware, and i already installed the flashtool, how do use the flashtool to flash back the stock firmware, when my phone doesn't turning on?
any suggestions/idea?
thanks
Click to expand...
Click to collapse
Click the lightenin icon (flash) select flashmode and then select the file you download, clear all wipes and exclusde everything but kernel, then flash.
This should flash onlu kernel.
If your bootloader is locked, don't flash any custom kernels.
ChikeD said:
Click the lightenin icon (flash) select flashmode and then select the file you download, clear all wipes and exclusde everything but kernel, then flash.
This should flash onlu kernel.
If your bootloader is locked, don't flash any custom kernels.
Click to expand...
Click to collapse
thanks for the reply sir, my phone is now ok.. big thanks..
ChikeD said:
Click the lightenin icon (flash) select flashmode and then select the file you download, clear all wipes and exclusde everything but kernel, then flash.
This should flash onlu kernel.
If your bootloader is locked, don't flash any custom kernels.
Click to expand...
Click to collapse
Hi
Need help even i am in the same problem I flashed the CM 11 Nightly.zip that contains the boot.img (kernel) and now my phone stops at "Sony" logo
I am Bootloader unlocked and what should I do ? is it advisable to flashmode only stock kernel or anything else ?
deepankarbu said:
Hi
Need help even i am in the same problem I flashed the CM 11 Nightly.zip that contains the boot.img (kernel) and now my phone stops at "Sony" logo
I am Bootloader unlocked and what should I do ? is it advisable to flashmode only stock kernel or anything else ?
Click to expand...
Click to collapse
If you only flashed the CM kernel then flashing stock should fix it.
Can't get into CWM recovery?
One more issue cropped up
ChikeD said:
If you only flashed the CM kernel then flashing stock should fix it.
Can't get into CWM recovery?
Click to expand...
Click to collapse
One more issue cropped up. I have completely installed CM 11 Nightly 24 for Xperia P but, the DSP Manager and Google Now force close. Google now can be activated by saying "OK GOOGLE" but doesn't work can you please guide on ?
deepankarbu said:
One more issue cropped up. I have completely installed CM 11 Nightly 24 for Xperia P but, the DSP Manager and Google Now force close. Google now can be activated by saying "OK GOOGLE" but doesn't work can you please guide on ?
Click to expand...
Click to collapse
As I don't follow CM11 development I have no clue.
Those are nightlies so you can expect issues.
Take logcat for those FCs and attach them to your question there.
Thanks
ChikeD said:
As I don't follow CM11 development I have no clue.
Those are nightlies so you can expect issues.
Take logcat for those FCs and attach them to your question there.
Click to expand...
Click to collapse
Thanks :good:
Related
I have a rooted SE wt19i with CWM recovery installed and yesterday I wiped all the data, cache and system files to install Minimul Triumph ROM.
When I rebooted my phone it was stucked at the First Sony Ericsson screen and didnt boot into recovery. I have a Backup On My SD.
Please Help
have you tried flashing back to the original firmware using flashtool?
Yes i DId try but it doesnt even go to flash mode
Edit:I finally managed to go to flash mode. I flashed the firmware succesfully thanks kevin
First, I cannot find that kind of ROM for WT19i, could be wrong ROM to install. You can only install ROMs, that are built for your phone.
Second, you must have custom kernel to boot into custom ROM. Stock kernel only works with stock ROM. First install custom kernel(there's plenty of them in Development section, like X Kernel, Rage Kernel, bbooff's kernel etc) and then via CWM install custom ROM(install from sdcard).
Most custom kernels include CWM.
Please help me
I have brick my sony live with walkman, (Actually what happen)
i have a sony live with walkman, with rooted, Unclock bootloader (with test point method), and i install cm7.2 rom in that and the phone works fine, i want to try other roms for doing this i have wrongly deleted the system files using CMW.
After that my phone not start gives a bootloap on FXP logo, after that i flash stock (52) rom using flash tool. and all the things work fine my phone start normal. Then i rooted my live with walkman again and install cmw on that, after doing this i got a message to update stock rom to (62) latest sony software. i update over OTA and the update download sucessfully. then my phone switch off to install the updates. but when i switch on the phone then phone not starts, when i press power button then it show a green blinking lines, even charging is also not there, and when i connect my phone to usb then it shows phone connected in flashmode.
Please help me how i recover my WT19i
sorry for my bad english
Thanks in Advance
If it connects in flashmode just use pcseus to repair the phone or use flashtools to flash stock fw back on it
Rudjgaard said:
If it connects in flashmode just use pcseus to repair the phone or use flashtools to flash stock fw back on it
Click to expand...
Click to collapse
i dont know how to use pcseus and what is stock fw.
if stock is stock rom (52) ftf. Then i have flash 2 or 3 times. but my phone automatically connected in flashmood. and when i tried to on my phone by pressing Start button then Green Led Blink and nothing happens.
azim0106 said:
i dont know how to use pcseus and what is stock fw.
if stock is stock rom (52) ftf. Then i have flash 2 or 3 times. but my phone automatically connected in flashmood. and when i tried to on my phone by pressing Start button then Green Led Blink and nothing happens.
Click to expand...
Click to collapse
Unbrick it using the files given in the sticked thread by someguyfromhell
mihahn said:
Unbrick it using the files given in the sticked thread by someguyfromhell
Click to expand...
Click to collapse
i didn't find (Sticked thread by someguyfromhell) will u please give me the link of that thread.
i will be very thankfull to u
waiting for your reply
thanks in advance
http://forum.xda-developers.com/showthread.php?p=24136222
Sent from my SK17i using xda app-developers app
Hello there!
This question might have appeared alot but I'll try to be as short and accurate as possible on the following:
About two weeks ago, I decided to root my Sony Live With Walkman (4.0.4 Ice cream sandwich) and now I'm thinking of installing Cyanogenmod 9 stable release. But I'll leave this mod for the last part and let us focus on the rooting process I've done.
I've used the following tutorial: talk.sonymobileDOTcom/thread/41119?start=0&tstart=0
At first, I was unsuccesful but in the second try I had managed to root my device (Unlocked bootloader).
Being a bit tired over the official Sony ICS, I thought of putting Cyanogen to my device. This is where the things get confusing for me:
I've spotted multiple tutorials and each one is different and unclear to me. These two are the ones I'm thinking of as the most reliable sources:
- wiki.cyanogenmodDOTorg/wiki/Sony_Ericsson_Live_with_Walkman:_Full_Update_Guide
- technologic101.wordpressDOTcom/2012/03/12/tutorial-how-to-install-cyanogenmod-9-0-ics-on-your-se-xperia-2011-device/
So, I have Cyanogen9 coconut, drivers, fastboot, google apps and proper FTF file downloaded.
But what now? Which tutorial is better and accurate for my state of device? Am I risking a brick by doing this? What are the current downsides of Cyanogenmod9 for this device?
Please, write your opinions, explain or link me to the proper guides for my case. I am grateful for any kind of information you give me!
Thanks!
First and foremost have you unlocked your bootloader?
Sent from a mango
andogeek10 said:
First and foremost have you unlocked your bootloader?
Sent from a mango
Click to expand...
Click to collapse
Yup, I did.
Flash the cm kernel. Flash cm rom in recovery. Done.
Cm comes pre rooted.
Sent from my SK17i using xda app-developers app
xhanafix said:
Flash the cm kernel. Flash cm rom in recovery. Done.
Cm comes pre rooted.
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
Is kernel the TFT file or the Cyanogenmod zip file (about 125MB)? And how do I flash this with Flashtool?
Boot.img inside the zip is the kernel. Extract and flash that file using fastboot. After flashing the kernel, start your phone and enter recovery. From recovery flash the zip files
Sent from my SK17i using xda app-developers app
Okay then you have done have of the work.
Now backup all your contacts, apps, sms's etc. Then power off your device and boot into fastboot mode. Then take the kernel from the CM9 zip and flash it. After that start your phone and just when the logo gets brighter press the volume down button with which you will boot into the CWM recovery. After that navigate to backup and restore and backup your rom. Then do a wipe data/factory reset ,then wipe chache and after that go to advanced and then wipe the Dalvik Cache. After that go to install zip from sd card and then choose from sd card. then navigate to your rom and flash it. After the flashing is done flash gapps and then reboot.
Note: To navigate in CWM use your volume keys and use the home button to select.
To enter Fastboot: Plug the usb cable side into the phone and while you are plugging it into the computer keep
your volume up key pressed.
To flash a kernel: Put the kernel you extracted from the zip into your fastboot folder.Then open a command
prompt in that particular directory ( in Windows 7 press shift in a blank place and right click).
Then enter this command fastboot flash boot boot.img(Your phone must be in fastboot
mode for this.)
In my signature, there's a guide how to install a custom rom/custom kernels, maybe this could help you!
I would use the cyanogenmod full update guide :good:
You don't need any ftf, you flash a custom rom with clockworkmod (cwm), but this should be explained in the guide
andogeek10 said:
Okay then you have done have of the work.
Now backup all your contacts, apps, sms's etc. Then power off your device and boot into fastboot mode. Then take the kernel from the CM9 zip and flash it. After that start your phone and just when the logo gets brighter press the volume down button with which you will boot into the CWM recovery. After that navigate to backup and restore and backup your rom. Then do a wipe data/factory reset ,then wipe chache and after that go to advanced and then wipe the Dalvik Cache. After that go to install zip from sd card and then choose from sd card. then navigate to your rom and flash it. After the flashing is done flash gapps and then reboot.
Note: To navigate in CWM use your volume keys and use the home button to select.
To enter Fastboot: Plug the usb cable side into the phone and while you are plugging it into the computer keep
your volume up key pressed.
To flash a kernel: Put the kernel you extracted from the zip into your fastboot folder.Then open a command
prompt in that particular directory ( in Windows 7 press shift in a blank place and right click).
Then enter this command fastboot flash boot boot.img(Your phone must be in fastboot
mode for this.)
Click to expand...
Click to collapse
Thank you, you've cleared alot of things up for me.
I hope I'll get some time to try the whole thing out and write about it here.
aljazeek said:
Thank you, you've cleared alot of things up for me.
I hope I'll get some time to try the whole thing out and write about it here.
Click to expand...
Click to collapse
Welcome.
Oh, before I get myselft into this, am I free of installing any drivers? Since I've installed some drivers for rooting purposes, I'm not sure if I need to install these drivers I've downloaded for CM9
aljazeek said:
Oh, before I get myselft into this, am I free of installing any drivers? Since I've installed some drivers for rooting purposes, I'm not sure if I need to install these drivers I've downloaded for CM9
Click to expand...
Click to collapse
No, just the fastboot drivers to flash the kernel. Go to flashtool installation folder > drivers and install all of them for all devices, that should be all :good:
Ran into a problem with ROM Manager :/ It's supposed to offer me recovery mode by rocking the volume up or down while device is rebooting, but none of these work (device boots normally).
Any idea on how to solve this?
aljazeek said:
Ran into a problem with ROM Manager :/ It's supposed to offer me recovery mode by rocking the volume up or down while device is rebooting, but none of these work (device boots normally).
Any idea on how to solve this?
Click to expand...
Click to collapse
Have you flashed a custom kernel?
Sent from a mango
andogeek10 said:
Have you flashed a custom kernel?
Sent from a mango
Click to expand...
Click to collapse
I'm not sure about that... all I know is that my phone is rooted and bootloader unlocked.
So how and which custom kernel should I flash then?
aljazeek said:
I'm not sure about that... all I know is that my phone is rooted and bootloader unlocked.
So how and which custom kernel should I flash then?
Click to expand...
Click to collapse
It depends. If you wanna flash any CM or AOKP roms you have to flash thier respective kernels. If you want to flash any stock based roms you can flash any ICS or GB kernel you want like Mesa, Panic kernel etc.
As for how to flash a kernel refer to my post on the page before.
Sent from a mango
andogeek10 said:
It depends. If you wanna flash any CM or AOKP roms you have to flash thier respective kernels. If you want to flash any stock based roms you can flash any ICS or GB kernel you want like Mesa, Panic kernel etc.
As for how to flash a kernel refer to my post on the page before.
Sent from a mango
Click to expand...
Click to collapse
Ah, all these processes are confusing me so I apologize for forgetting about that! Reminded now.
So, to enter Clockwork recovery mode, my phone has to be connected to the PC with usb debugging on?
aljazeek said:
Ah, all these processes are confusing me so I apologize for forgetting about that! Reminded now.
So, to enter Clockwork recovery mode, my phone has to be connected to the PC with usb debugging on?
Click to expand...
Click to collapse
No. For entering the CWMR you have to press the volune down button when the bootup logo gets brighter. For this either you must have CWMR install or else you must have a custom kernel
Sent from a mango
andogeek10 said:
No. For entering the CWMR you have to press the volune down button when the bootup logo gets brighter. For this either you must have CWMR install or else you must have a custom kernel
Sent from a mango
Click to expand...
Click to collapse
That didn't work. When the Sony logo gets brighter, a blue LED lights up for that moment.
In cwm, selecting 'Flash ClockworkMod Recovery' opens up a box where my phone model is displayed. After that, it says it's unsupported and I can manually select either 2.x or 3.x+. I've selected the 3.x+ one and in the menu it says 'Current Recovery: ClockworkMod 5.X.X.X
Shall I try with 2.x? I have no clue here.
System setting>about phone
Mind telling us your kernel version? From there we would know your current kernel
Sent from my SK17i using xda app-developers app
Hi,
I unlocked my xperia mini pro and then tried the Fastboot Tool to flash the boot.img that belongs to CM 10. It was always failing with the Fastboot and the command prompt fastboot.
By mistake, I flashed another .img file and now the phone decided now to start up. Not even given any LED colour or so.
What can I do?
Thanks
What Rom did you flash. Second kernel did you flash ?
Device : Xperia Mini ST15i
Rom : Pureness V4
Kernel : Lupus V9
Mods : Beats audio + Walkman V7.5
bhaidar said:
Hi,
I unlocked my xperia mini pro and then tried the Fastboot Tool to flash the boot.img that belongs to CM 10. It was always failing with the Fastboot and the command prompt fastboot.
By mistake, I flashed another .img file and now the phone decided now to start up. Not even given any LED colour or so.
What can I do?
Thanks
Click to expand...
Click to collapse
Please flash a stock rom (ftf file) with flashtool first. If your device doesn't boot after this, then it is a real problem. Remember to wipe data.
Hi,
I started out by unlocking the bootloader and it worked fine.
I tried to boot the CM image file, it was always giving me an error in Fastboot mode saying that outside range or so.
Then I downloaded Rage and tried to fastboot that image, after several trials, I can no longer start my phone.
Thank you
eojlicec said:
What Rom did you flash. Second kernel did you flash ?
Device : Xperia Mini ST15i
Rom : Pureness V4
Kernel : Lupus V9
Mods : Beats audio + Walkman V7.5
Click to expand...
Click to collapse
abcdjdj said:
Please flash a stock rom (ftf file) with flashtool first. If your device doesn't boot after this, then it is a real problem. Remember to wipe data.
Click to expand...
Click to collapse
Can I flash a stock rom while the phone is not starting up? If yes, where to get one? I already know how to use the flashtool on my Windows.
Thanks
bhaidar said:
Can I flash a stock rom while the phone is not starting up? If yes, where to get one? I already know how to use the flashtool on my Windows.
Thanks
Click to expand...
Click to collapse
There are download links in the sticked thread by someguyfromhell, download a ftf for your device
Open flashtool and click the flash, flashmode, select the ftf and click okay.
Now take out the battery of your phone, wait a few seconds, insert battery again, hold volume down, connect usb to pc while holding volume down, the green led will light up. The flashing process will start and when it's finished you will get a working rom again :good:
Or you could try to download a kernel for your device (like rage kernel), take off battery, insert it, hold volume up, connect it to pc while holding volume up, start flashtool, click the flash, fastboot mode, select the boot.img for your device, click ok. That's it
mihahn said:
There are download links in the sticked thread by someguyfromhell, download a ftf for your device
Open flashtool and click the flash, flashmode, select the ftf and click okay.
Now take out the battery of your phone, wait a few seconds, insert battery again, hold volume down, connect usb to pc while holding volume down, the green led will light up. The flashing process will start and when it's finished you will get a working rom again :good:
Or you could try to download a kernel for your device (like rage kernel), take off battery, insert it, hold volume up, connect it to pc while holding volume up, start flashtool, click the flash, fastboot mode, select the boot.img for your device, click ok. That's it
Click to expand...
Click to collapse
Thanks a lot for your info. Is this the thread?
http://forum.xda-developers.com/showpost.php?p=27376024&nocache=1
Thanks
bhaidar said:
Thanks a lot for your info. Is this the thread?
http://forum.xda-developers.com/showpost.php?p=27376024&nocache=1
Thanks
Click to expand...
Click to collapse
Yes that's the right one
By the way I appreciate hitting thanks
mihahn said:
There are download links in the sticked thread by someguyfromhell, download a ftf for your device
Open flashtool and click the flash, flashmode, select the ftf and click okay.
Now take out the battery of your phone, wait a few seconds, insert battery again, hold volume down, connect usb to pc while holding volume down, the green led will light up. The flashing process will start and when it's finished you will get a working rom again :good:
Or you could try to download a kernel for your device (like rage kernel), take off battery, insert it, hold volume up, connect it to pc while holding volume up, start flashtool, click the flash, fastboot mode, select the boot.img for your device, click ok. That's it
Click to expand...
Click to collapse
Hi,
the rage kernel worked fine . I can see a screen saying Xperia Free xdadevelopers, Sony Ericsson.
Now, I only have kernel right? How to proceed to get a rom? Many thanks
bhaidar said:
Hi,
the rage kernel worked fine . I can see a screen saying Xperia Free xdadevelopers, Sony Ericsson.
Now, I only have kernel right? How to proceed to get a rom? Many thanks
Click to expand...
Click to collapse
Which rom do you want? Cyanogenmod 10 or which rom? Rage Kernel is only for ics based roms
morkso(agency)
mihahn said:
Which rom do you want? Cyanogenmod 10 or which rom? Rage Kernel is only for ics based roms
Click to expand...
Click to collapse
Hi,
I installed for now the rage kernel, then installed the ftf stock firmware.
My phone started up perfect Thank you.
I noticed your links at the end of your signature, I will follow your instructions to flash the CM 10 for mango (SK17i).
Sounds good?
Regards
Bilal
bhaidar said:
Hi,
I installed for now the rage kernel, then installed the ftf stock firmware.
My phone started up perfect Thank you.
I noticed your links at the end of your signature, I will follow your instructions to flash the CM 10 for mango (SK17i).
Sounds good?
Regards
Bilal
Click to expand...
Click to collapse
Yes, of course. For any further questions, just ask :good:
By the way: You first flashed rage kernel and after that the stock.ftf? Because the stock ftf has overwritten your rage kernel. You have to flash the kernel after the ftf
mihahn said:
Yes, of course. For any further questions, just ask :good:
By the way: You first flashed rage kernel and after that the stock.ftf? Because the stock ftf has overwritten your rage kernel. You have to flash the kernel after the ftf
Click to expand...
Click to collapse
So do I need the kernel? Or the ftf includes a default one?
I want to flash CM10 for Mango, shall I follow your link on how to do so?
Thanks
bhaidar said:
So do I need the kernel? Or the ftf includes a default one?
I want to flash CM10 for Mango, shall I follow your link on how to do so?
Thanks
Click to expand...
Click to collapse
Okay to install cm10 do this:
1. Download cm-10 from FXP for mango and the gapps for jelly bean 4.1 (search on google)
2. Copy the two zip files to your sdcard
3. Open the cm10 zip on your pc
4. Take the boot.img to the flashtool installation folder -> kernels (you have to make this folder)
5. Go to the flashtool folder -> drivers and install all drivers for all devices/modes
6. Launch flashtool
7. Click the flash -> fastboot mode
8. Shut down phone, wait 5 seconds, hold volume up and while holding volume up connect phone to pc (blue led will light up)
9. On PC: Select kernel to flash -> go to kernels folder -> select the boot.img
10. Wait a few seconds until flashing has ended
11. Unplug phone and start it. While it starts press volume down again and again until you are in cwm
12. Navigate with the volume keys, select with the home button
13. Go to backup/restore -> backup and backup your stock rom
14. go back (back button)
15. Now wipe data/factory reset, wipe cache partition, advanced -> wipe dalvik cache
16. Install zip from sdcard -> choose the cm10 zip
17. Wait until installation has finished
18. install zip from sdcard -> choose the gapps zip
19. Wait until it has finished
20. Reboot phone and enjoy jellybean 4.1.2
That's all, hit thanks if this has helped you :good:
mihahn said:
Okay to install cm10 do this:
1. Download cm-10 from FXP for mango and the gapps for jelly bean 4.1 (search on google)
2. Copy the two zip files to your sdcard
3. Open the cm10 zip on your pc
4. Take the boot.img to the flashtool installation folder -> kernels (you have to make this folder)
5. Go to the flashtool folder -> drivers and install all drivers for all devices/modes
6. Launch flashtool
7. Click the flash -> fastboot mode
8. Shut down phone, wait 5 seconds, hold volume up and while holding volume up connect phone to pc (blue led will light up)
9. On PC: Select kernel to flash -> go to kernels folder -> select the boot.img
10. Wait a few seconds until flashing has ended
11. Unplug phone and start it. While it starts press volume down again and again until you are in cwm
12. Navigate with the volume keys, select with the home button
13. Go to backup/restore -> backup and backup your stock rom
14. go back (back button)
15. Now wipe data/factory reset, wipe cache partition, advanced -> wipe dalvik cache
16. Install zip from sdcard -> choose the cm10 zip
17. Wait until installation has finished
18. install zip from sdcard -> choose the gapps zip
19. Wait until it has finished
20. Reboot phone and enjoy jellybean 4.1.2
That's all, hit thanks if this has helped you :good:
Click to expand...
Click to collapse
Thanks, the FXP is here? http://forum.xda-developers.com/showthread.php?t=1780319
What if I want to install from here, http://get.cm/?device=mango, is that Okay?
Thanks
bhaidar said:
Thanks, the FXP is here? http://forum.xda-developers.com/showthread.php?t=1780319
What if I want to install from here, http://get.cm/?device=mango, is that Okay?
Thanks
Click to expand...
Click to collapse
Actually, it's this one
Thanks. I will choose the other though, I am used to their nightly builds on my other phone
Many thanks
bhaidar said:
Thanks, the FXP is here? http://forum.xda-developers.com/showthread.php?t=1780319
What if I want to install from here, http://get.cm/?device=mango, is that Okay?
Thanks
Click to expand...
Click to collapse
How would I use the backedup stock? What's the case, and how to restore, by just going to recovery and restore?
Thanks
bhaidar said:
How would I use the backedup stock? What's the case, and how to restore, by just going to recovery and restore?
Thanks
Click to expand...
Click to collapse
If you have made a cwm backup of stock rom or stock based rom, then when you are on the fxp kernel, do not restore the backup. Firstly, if you want to restore the cwm backup then flash rage kernel or any stock ics based kernel and then go to restore in cwm. You cannot use stock rom with fxp kernel because the kernel configurations are for cm and not stock.
Press Thanks if I helped
bhaidar said:
How would I use the backedup stock? What's the case, and how to restore, by just going to recovery and restore?
Thanks
Click to expand...
Click to collapse
Like the guys above said, flash rage kernel and afterwards restore the backup. This is if you want to come back to stock rom one time
I am on CM10 from FXP but made some changes by M66B (SK17 user too)
Look on my signature to download the last version of the extended ROM. Battery improvement on this ROM is one of the main features
Works the same or better than FXP one. The boot.img comes inside with the ROM zip file, just follow the steps listed by mihahn. Last version to this date is 202 ("~FXP202 features 1-3,7-9,12-13,23-24,26,28-38,40-42 (January 11, 2013)" that's the name of the zip file)
Hello,
I'm trying to install the P.A.C Man rom on my Xperia Sola. I got the boot.img from the .zip file and successfully flashed it via fastboot.
After that I rebooted and the "Xperia Sony Smartphone" splash came up and the led flashed once. Usually I would go to CWM from there by pressing volume+. But now just nothing happens; the splashscreen keeps showing and I can't enter CWM to flash the rom istself.
Did I do something wrong or did I miss any important steps?
I would appreciate any help!
lobbos said:
Hello,
I'm trying to install the P.A.C Man rom on my Xperia Sola. I got the boot.img from the .zip file and successfully flashed it via fastboot.
After that I rebooted and the "Xperia Sony Smartphone" splash came up and the led flashed once. Usually I would go to CWM from there by pressing volume+. But now just nothing happens; the splashscreen keeps showing and I can't enter CWM to flash the rom istself.
Did I do something wrong or did I miss any important steps?
I would appreciate any help!
Click to expand...
Click to collapse
1) You are on unlocked bootloader, right?
2) Did you try with volume - button?
DaRk-L0rD said:
1) You are on unlocked bootloader, right?
2) Did you try with volume - button?
Click to expand...
Click to collapse
Somehow I got I figured out. I flashed another kernel via fastboot, got into CWM and flashed the rom there. Now my system is up and running and everything seems to work just fine.
I wasn't sure whether I need the boot.img from the kernel or not.
Thanks for your help anyway, DaRk-L0rD!
Hello there!
I have rooted my phone sucsessfull, and flashed CWM, but i wanted to flash a rom (thisone: the JB version, link) i whas on .10 version (stockrom) but now i get bootloop i also cannot access CWM touch (Starting up phone and spam volume up button) What can i do?
please help!
android-freek said:
Hello there!
I have rooted my phone sucsessfull, and flashed CWM, but i wanted to flash a rom (thisone: the JB version, link) i whas on .10 version (stockrom) but now i get bootloop i also cannot access CWM touch (Starting up phone and spam volume up button) What can i do?
please help!
Click to expand...
Click to collapse
Try this press button continously( volume up or down i don't know about sola but in xperia u cwm can access using down button )
If this does not help then flash the stock ftf file using flashtool and then root again
Gud luck
Sent from my ST25i using Tapatalk
Thanks for replay, but pressing volume up or down doesnt do anything also flashing stock .TFT doesnt change anything I think my phone is bricked *very sad face*
android-freek said:
Thanks for replay, but pressing volume up or down doesnt do anything also flashing stock .TFT doesnt change anything I think my phone is bricked *very sad face*
Click to expand...
Click to collapse
Stoc rom keep boot looping?
I dont know.. I have installed that rom i posted, that bootlooped and then i flahed stock rom (V .54) that also bootloops (i think flashing faild because i get the bootanimation of that rom i posted in the top post) but do i need to check no final verification?
Can i flash a kernal with fastboot mode?
android-freek said:
Can i flash a kernal with fastboot mode?
Click to expand...
Click to collapse
yes you can. get a kernel compatible to the rom you flashed.
flashing stock rom thru flashtool might be a better idea tho. then start again from scratch, make sure you got it right this time.
gaggago47 said:
yes you can. get a kernel compatible to the rom you flashed.
flashing stock rom thru flashtool might be a better idea tho. then start again from scratch, make sure you got it right this time.
Click to expand...
Click to collapse
Do i need to check "No final verification"?
Okay, i just stated up flashtool and started flashing the .54 firmware, Checked no unkown sources. Started flashing. Flashtool finished and said i need to reboot my phone, what i did: Disconnected USB cable, waited 1 minute and booted up phone... Now i just got the "old" bootanimation... and still bootloop (from the rom in the first post) so its looks for me that flashtool "didnt flashed" my phone i also tryed sony update service but thatone said it cant flash .54 because i got constom firmware....
I got it! if flashed ONLY THE KERNAL from .54..... Who has a good .tft of the whole stock rom? And how can i charge my phone when it is in bootloop? i think my phone is almost empty now...
android-freek said:
Who has a good .tft of the whole stock rom?
Click to expand...
Click to collapse
Try to rurn it off firt, power + volume up untill you feel (1+) 3 vibrations, see if it charges then.
If you have used PC Companion before, start repair, and wait till file download is complete and PCC ask you to connect in flash mode, close PCC and built the FTF with flashtool.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
rajput10906725 said:
Try this press button continously( volume up or down i don't know about sola but in xperia u cwm can access using down button )
If this does not help then flash the stock ftf file using flashtool and then root again
Gud luck
Sent from my ST25i using Tapatalk
Click to expand...
Click to collapse
hi
---------- Post added at 12:18 PM ---------- Previous post was at 12:07 PM ----------
android-freek said:
Hello there!
I have rooted my phone sucsessfull, and flashed CWM, but i wanted to flash a rom (thisone: the JB version, link) i whas on .10 version (stockrom) but now i get bootloop i also cannot access CWM touch (Starting up phone and spam volume up button) What can i do?
please help!
Click to expand...
Click to collapse
Hi
u must flash boot.img from your rom folder in flash mod and then flash yr rom from recovery mod i think it work
Hello there!
Everything worked THANK YOU ALL!!!
I re-rooted my phone and now i have CWM installed!
GREAT FORUM! THANKS ALL