Hi,
I have a Prestigio 5197D 9,7'' tablet. It has 16gb internal memory, and 1GB of RAM. CPU is clocked at 1GHz. These are the other specs from adb commands:
Code:
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun4i
Revision : 0000
Serial : 09c1a35f5052484880728850162367c7
And this is the partition info:
Code:
major minor #blocks name
93 0 16384 nanda
93 8 2048 nandb
93 16 32768 nandc
93 24 393216 nandd
93 32 1048576 nande
93 40 1024 nandf
93 48 32768 nandg
93 56 261120 nandh
93 64 1024 nandi
93 72 13774848 nandj
93 73 13773824 nandj1
When I open CPU-Z, it says that my tablet is Allwinner A10, and that CPU architecture is ARM Cortex-A8.
AnTuTu Benchmark says that brand is yftech, and I found in CPU Identifier app, that Product and Product code is mw07.
So, I suppose this is clone of some Allwinner A10 tablet, but I would like to know which, so I can install some custom rom and possible newer Android. Currently I have 4.0.3. Any help here is appreciated.
Second issue I have is with recovery. It seems that default recovery does not mount it's internal storage and I can't put anything to flash. It recognizes some micro-SD cards, but unfortunately, the only one that recognized I sold with some old phone. Every other card and internal storage works fine when I boot the tablet in normal mode. I would buy another card, but I can't be sure it'll work in recovery. Any suggestion here, maybe to modify some files so it can mount internal storage?
Thanks in advance!
Related
Can anyone provide me with info for a custom ROM for this tablet?
I have looked everywhere but cannot root the thing and cannot find any roms other than the stock one.
I am having some very bad wifi problems with this ROM. Disconnecting and reconnecting, hanging on connecting/obtaining ip address. etc
Was hoping someone could provide a more stable ROM.
I can use the device as a test for someone if they want to help me cook a new ROM
Any help would be appreciated.
Thanks
Ballz
Maybe this info will help :-
$ lsmod
RTL8188EUS 493690 0 - Live 0x00000000
mali 187485 10 - Live 0x00000000
ump 45808 19 mali, Live 0x00000000
uftl 12524 1 - Live 0x00000000
ubifs 162052 3 - Live 0x00000000
ubi 69820 6 uftl,ubifs, Live 0x00000000
$ cat /proc/cpuinfo
Processor : ARMv7 Processor rev 1 (v7l)
processor : 0
BogoMIPS : 533.29
processor : 1
BogoMIPS : 535.75
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc05
CPU revision : 1
Hardware : iMAPx800
Revision : 0000
Serial : 0000000000000000
Maybe another device has a similar hardware list i could try the rom from?
I have a cheap Chinese tablet. Here is the model,
http://szstarfly.en.alibaba.com/pro...reen_Cheap_android_font_b_Tablet_b_font_.html
I was trying to install CWM on it as per http://forum.xda-developers.com/showthread.php?t=2189640 and it got soft bricked. If i try to reboot it it is always coming to CWM recovery. Also I see below error messages in CWM
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
It is Allwinner A13 cortex8 processor.
How do I restore it back or Load a working version of ROM to it?
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun5i
Revision : a13b
Serial : 06c19c6635373030504e59301625428d
[email protected]:/ # cat /proc/partitions
cat /proc/partitions
major minor #blocks name
93 0 26384 nanda
93 8 16384 nandb
93 16 32768 nandc
93 24 524288 nandd
93 32 1228800 nande
93 40 16384 nandf
93 48 32768 nandg
93 56 262144 nandh
93 64 262144 nandi
93 72 5330160 nandj
this is your tablet firmware most probably. A13_86ve_m707ebc.20130920
and it is available Here.
what password for the archive, please
hi
alexvovan said:
what password for the archive, please
Click to expand...
Click to collapse
what pssword for this
i cant open this
please send for me pass
password
hi plz password
i also have the same problem same model
the same problem its not getting flashed how to flash it
There is no password on the file.
most probably you have corrupted download.
Rar file required password.what is the password?
password for rar
have downloaded rar .for atouch a703 and it requires password to open pliz help with password
Dear Friends,
I am new to this and I am good in computer not in android.
My Epad - E937 Android Tablet is bricked after I installed Novatools.apk which i though I can install CWM to update..
After installing and rebooting, screen flashes continually
now nothing is coming on the screen. But system sees the tablet.
I done a backup prior to install novatool in my SD CARD which read like this
/dump
under this folder
boot.img
bootloder.img
data.rar
recover.img
system.rar
My Tablet info as follows
CPU IDS: 31 - 31 [Mali-400 MP] 1024 768 159 Custom 160
*** Report from an obsolete version of CPU identifier ***
Bogomips+loadtime:1001.88.241 73.2.265
Device identified: E937 (Allwinner)
E:4171- Inches:7.21-9.7
1)unknown
2)crane_a106
3)crane-a106
4)E937
Build machine:brn-guohuaichao
Creator:guohuaichao
Board:sun4i_ <>
Speed:300000 - 1008000 States:27
detection2: Allwinner A10
detection1: Allwinner A10
(IA:Softwinners Crane EVB E937)
Version 8.5.0.000.s-s-.1.1.B Mem814
Adaptation:!!! ADAPTATION STEP 29 Mali-400 MP <crane> 4 false 1007Mb 30.0C
4.0.4 Ice Cream Sandwich, 60 72 84 96 108 120 132 144 156 168 180 192 240 288 336 384 432 480 528 576 600 648 720 744 816 864 1008 (!1200!) (!1200!)
After googling I downloaded a file "sun4i_crane_futekoA90universal_20120531.img" and Live suit.. I am getting error X162 and Phonixusbpro X162 Down_Febnand"
Could you please help me how to make it work ?
Your help is greatly appreciated
Hello folks. I have an intriguing brazilian tablet POSITIVO YPY_ABD10 and was wondering if it is possible to put some custom rom or custom recorevery or any other rom compatible on it and then try to change the rom because it comes in it is terrible.
I try to followed these tutorials here on forum:
//slatedroid.com/topic/40623-aml-flash-tool-aka-imageburntool/
//slatedroid.com/topic/41478-how-to-unbrick-your-amlogic-aml8726-mx-series-tablet-v20/
//slatedroid.com/topic/95977-howto-create-a-rescue-sd-card-for-pretty-much-every-amlogic-8726-mx-device/
and I try too some roms but so far no effective success... I think only worsened the situation somewhat for before he was "soft bricked" and now is "hard bricked" before I could get into recovery mode that came with him by pressing the "power + vol+" and now the sign of life he gives is when I press "power + vol-" and computer recognizes as "M3 CHIP", then I try burn some rom with the flash tool but still no success yet ...
Presentation of it ... ¬ ¬ '
//youtube.com/watch?v=tmqS-76l5r0
Specs:
Positivo YPY_ABD10
Operating System Android 4.0.4
Model Positivo YPY_AB10D
Processor ARM AMLOGIC @ 1.00 GHz
1 processor
Processor ID ARM implementer 65 architecture 7 variant 2 part 3081 revision 4
L1 Instruction Cache 0 KB
L1 Data Cache 0 KB
L2 Cache 0 KB
L3 Cache 0 KB
Motherboard f03ref_NX
BIOS
Memory 652 MB
-------------------------
CPU
Load Average: 3.00 3.01 3.17 1/664 3934
Processor: ARMv7 Processor rev4(v7L)
BogoMIPS: 655.36
Features: swp half thumb fastmult vfp edsp neon vfpv3
CPU Implementer: 0x41
CPU architecture: 7
CPU variant: 0x2
CPU part: 0xc09
CPU revision: 4
Hardware: AMLOGIC MESON3 8726M SKT SH
Revision: 0020
Serial: 000000000000000c
What are my options? Help me please. :help:
Thank you all. (Sorry my english)
hey guys,
i have an issue while installing Remix OS on my mac on an external hard drive, i have this error:
intel_rapl: driver does not support CPU family 6 model 70
i searched on the web a little and i couldn't find a real answer so wanted to know if a solution did exists ?
thank you
it happens to me too.
lenovo t400
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz (family: 0x6, model: 0x17, stepping: 0xa)
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz
stepping : 10
microcode : 0xa0c
cpu MHz : 800.000
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm ida dtherm tpr_shadow vnmi flexpriority
bugs :
bogomips : 5054.21
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
I reboot and remix loads fine.
i restarted but it keeps doing this,
haven't installed it yet because i can't but i have the 64 bits version of the OS on the 3rd partition of my external hdd
how do yen launch Remix?
yours is a MAC, but the CPU is Intel.
it happened again.
diehard2013 said:
how do yen launch Remix?
yours is a MAC, but the CPU is Intel.
Click to expand...
Click to collapse
Macs have been using Intel CPUs for over a decade, which is why Hackintosh is possible.
moriel5 said:
Macs have been using Intel CPUs for over a decade, which is why Hackintosh is possible.
Click to expand...
Click to collapse
and the PowerPC?
reply
I get the same message on my HP Mini with Atom processor, and with a different model number. I ignore the message because it doesn't seem to interfere with the operation of the computer.
diehard2013 said:
and the PowerPC?
Click to expand...
Click to collapse
Were discontinued at least slightly over a decade ago.
I currently have a Summer 2001 iMac G3 that I am trying to resurrect.
I also have this problem but mine is showing
intel_rapl driver does not support cpu family 15 model 2
Please help I want to run it on my pc...