Related
OK so let me start off with, great site. I have read a ton of information.
First: Siyah 4.3.3 (Latest) Kernel which now has been put to AJK v1.48s
ROM; SHOstock3 v2.5.9
PreMod Settings: SGS2 AT&T SGH-i777. Started with GB > AT&T OTA (KIES) 4.0.3 > AT&T OTA WIFI 4.0.4 (caused huge freaking headaches with battery, charging, turn off the phone loop, battery draining, etc.)
Issues:
Original Issue posted in this thread (viewing Single Post) http://forum.xda-developers.com/showpost.php?p=39350619&postcount=18
Creepy offered something to try. That never worked as all I was able to do was download mode or stare at the Samsung Galaxy S2 Splash Screen. Well, I took to his download repository and other links and used his One-Click Recovery to stock GB Rom to make part of my phone usable, using this link here: http://forum.xda-developers.com/showpost.php?p=18859438&postcount=199
While it is Gingerbread at least my phone is usable. I want to try his STOCK ICS method but that mentions the eMMC super-brick bug.
So this is what I have tried so far. I have tried installing Siyah 4.3.3 nomswap for my kernel using Mobil-Odin Lite. That works but it never reboots or actually says finished. What it does do is stay at the wicked purple splash with the yin yang symbol. I left it like that last night until I woke up this morning and it never changed. So I rebooted the phone and the Kernel is on there. I reboot into recovery so that I can install SHOstock3 v2.5.9. That goes off flawlessly except here the last few times it won't reboot when I go to the GO BACK. It sticks and doesn't do anything. Rebooting shows the SHOstock3 Engine Boot Animation. Once it stops it goes to ask me for the encryption password. Well I put in my password (was the same one to the unlock screen) and it reboots and you see the nifty Samsung animation logo and then goes to the Samsung Galaxy S2 Animation Logo and then just stays there. It really pisses me off.
So after all that I finally put a new Kernel on there,AJK 1,48s. Pretty cool it loads up and then reboots. Well AJK shows up after the light-blue bar fills up and then goes black and the 4 touch sensitive row keys are lit up for a bit before going dark but the phone is still on. So I rebooted to recovery (CWM now with the Kernel) fixed tweaks, went to advanced and saw all sorts of options. Tried clearing caches for ROM 2 and restarting,no effect. I removed ROM 2 and went through reboot and nothing. Restored ROM 2 and nothing. Re installed SHOstock3 v2.5.9. Did the same thing after install and not backing out when I hit GO BACK. Rebooted, same scenario that happened before with requiring password. Entering password does the same thing with a reboot and then staying on Samsung Splash Screen. If I Don't enter the password and reboot,same thing happens. So after being irritated and pissed off I ran Creepy's One-Click Fix again and paid attention to the phone and noticed it mentioned not being able to access the AT&T section or partition or something like that. So while part of my phone works under normal circumstances I want to figure out how to remove that encryption part of the phone and get full access (even though full memory and space are shown under Windows 7 and the files on the phone). The password I put on there isn't taking and I don't know if using PC methods for removing encryption (which could take awhile I know) needs to be employed (and if so which methods) or if that part is just screwed and I can't put on any other kernels or custom ROMs. Perhaps tell me where I messed up. Should I try swapping the ROMs from Advanced setting in CWM Recovery? Can I try a different ROM (kernel didn't seem to help)? I have done several factory resets dalvik cache wipes cache wipes formats,etc. and it is still there. I can say that before the whole encryption debacle (even though I was encrypted I did get in my phone after encrypting it) my pin unlock for my SIM wouldn't work and I actually SIM locked my phone. Had to go to AT&T and get a new SIM and was up and running. I put a 4 digit pin lock for the SIM (it let me do it) and when I went to unlock it after a reboot, it wanted an 8 pin for the PUK and wouldn't take what I put. I tried to change the PIN but to no avail. Once that happened I guess it snowballed. Any help is appreciated. I have searched and tried some things that looked to match my issue but none have totally helped. I do have ADB set up on my wife's laptop which I use to restore my phone to GB Stock ROM. I haven't been able to reboot the phone into Bootloader to do any fastboot commands as when I tried to do it the commands just sent the phone into normal reboot (though adb reboot recovery does boot to recovery). I Haven't tried booting to the bootloader using the new Kernel though so I will wait for confirmation or additional information before I try. Thanks guys.
Eagle
Couple of comments. Siyah 4.3.3 (and ajk) kernels are for 4.x ICS and JB so that explains why your stock Gingerbread system would not flash after you installed it. If you flash back to stock Gingerbread again, and then flash a custom kernel, use a kernel that is compatible with Gingerbread if you want to boot the system.
After doing a little research, it seems that a wipe data/factory reset will not clear the encryption, but a format data will. This information is not from a Samsung forum; it's from the Droid DNA forum. I'm thinking that the same thing may apply to the I777. See the thread here.
It might be worth a try anyway. Flash stock plus root Gingerbread, install mobile odin or mobile odin lite, and use it to flash Siyah 2.6.14. Boot into recovery and go to the Mounts and Storage section. There you can format data, (and all the other partitions, separately.)
creepyncrawly said:
Couple of comments. Siyah 4.3.3 (and ajk) kernels are for 4.x ICS and JB so that explains why your stock Gingerbread system would not flash after you installed it. If you flash back to stock Gingerbread again, and then flash a custom kernel, use a kernel that is compatible with Gingerbread if you want to boot the system.
After doing a little research, it seems that a wipe data/factory reset will not clear the encryption, but a format data will. This information is not from a Samsung forum; it's from the Droid DNA forum. I'm thinking that the same thing may apply to the I777. See the thread here.
It might be worth a try anyway. Flash stock plus root Gingerbread, install mobile odin or mobile odin lite, and use it to flash Siyah 2.6.14. Boot into recovery and go to the Mounts and Storage section. There you can format data, (and all the other partitions, separately.)
Click to expand...
Click to collapse
Thank you so much creepy. I will give that a try later and see how it goes. I hope the information I gave actually gives enough info. I know folks usually want enough. Ill post back my findings.
Eagle
quick follow up and what I tried
creepyncrawly said:
Couple of comments. Siyah 4.3.3 (and ajk) kernels are for 4.x ICS and JB so that explains why your stock Gingerbread system would not flash after you installed it. If you flash back to stock Gingerbread again, and then flash a custom kernel, use a kernel that is compatible with Gingerbread if you want to boot the system.
After doing a little research, it seems that a wipe data/factory reset will not clear the encryption, but a format data will. This information is not from a Samsung forum; it's from the Droid DNA forum. I'm thinking that the same thing may apply to the I777. See the thread here.
It might be worth a try anyway. Flash stock plus root Gingerbread, install mobile odin or mobile odin lite, and use it to flash Siyah 2.6.14. Boot into recovery and go to the Mounts and Storage section. There you can format data, (and all the other partitions, separately.)
Click to expand...
Click to collapse
Hey Creepy, I have a quick follow up and want to tell you what I have tried.
So I had already used Kies to move to AT&T v 4.0.4 ICS on my phone when I read your post. Rather than flashback again to GB I went ahead and put Siyah 4.3.3 on my phone. Went great, rebooted and installed quick and everything. Well I rebooted into recovery and went to mounts and storage and formatted the data and all that there and even formatted the secondrom data and all that. Did it a couple times to make sure everything was clean and good to go. Even put AJKs kernel on there after I ran the cleanrom script and it went flawlessly. I did factory resets and wipes and all that and installed SHOstock3 v2.5.9 and started up great. Well it got past the animation and the damn Password for encryption popped up. Well I put the wrong password in and it rebooted without the SAMSUNG screen and went through the boot ani and back to the password for encryption screen. I put the right password in, it reboots and you see the Samsung logo flash quickly and then it sticks on the Samsung Galaxy S2 Splash screen. I don't know what is holding it up from going forward unless when I messed up the first go around and it deleted everything if it didn't take out the bootload command or what have you. So I don't know if this idea will work but I am going to flashback to GB and put the siyah version on there that you linked and see if that will work.
One tihng, when Iencrypted the device the first go round, I onlydid the used data and area not the whole thing. Is this affecting it somehow? Any other ideas to try? I figured a full data format would remove the encryption but it never pops up saying all encryption will be removed. What I need is access to that area of the phone if I could just mount it on the computer. Is it possible after formatting the data, or before, that I should mount internal USB, DATA, etc and try another format/wipe or at least mount them to see if they can be used? Thanks for the help. For anyone else viewing this post (which actually is a lot) any help or ideas are appreciated. I am thinking I may need to format everything and get ahold of Samsung to see if they will reset my phone for me. I just wonder if the PIN lock on my SIM card that got locked when it wouldn't take my PIN didn't mess something up as well.
Eagle
WarEagleUS said:
Hey Creepy, I have a quick follow up and want to tell you what I have tried.
So I had already used Kies to move to AT&T v 4.0.4 ICS on my phone when I read your post. Rather than flashback again to GB I went ahead and put Siyah 4.3.3 on my phone. Went great, rebooted and installed quick and everything. Well I rebooted into recovery and went to mounts and storage and formatted the data and all that there and even formatted the secondrom data and all that. Did it a couple times to make sure everything was clean and good to go. Even put AJKs kernel on there after I ran the cleanrom script and it went flawlessly. I did factory resets and wipes and all that and installed SHOstock3 v2.5.9 and started up great. Well it got past the animation and the damn Password for encryption popped up. Well I put the wrong password in and it rebooted without the SAMSUNG screen and went through the boot ani and back to the password for encryption screen. I put the right password in, it reboots and you see the Samsung logo flash quickly and then it sticks on the Samsung Galaxy S2 Splash screen. I don't know what is holding it up from going forward unless when I messed up the first go around and it deleted everything if it didn't take out the bootload command or what have you. So I don't know if this idea will work but I am going to flashback to GB and put the siyah version on there that you linked and see if that will work.
One tihng, when Iencrypted the device the first go round, I onlydid the used data and area not the whole thing. Is this affecting it somehow? Any other ideas to try? I figured a full data format would remove the encryption but it never pops up saying all encryption will be removed. What I need is access to that area of the phone if I could just mount it on the computer. Is it possible after formatting the data, or before, that I should mount internal USB, DATA, etc and try another format/wipe or at least mount them to see if they can be used? Thanks for the help. For anyone else viewing this post (which actually is a lot) any help or ideas are appreciated. I am thinking I may need to format everything and get ahold of Samsung to see if they will reset my phone for me. I just wonder if the PIN lock on my SIM card that got locked when it wouldn't take my PIN didn't mess something up as well.
Eagle
Click to expand...
Click to collapse
Should I try TWRP instead of CWM and if so where should I grab it from?
Status Update
So this is what I have tried so far as of this moment.
I reflashed using your Stock + Root Gingerbread ROM.
Wiped DATA and everything in recovery menu several times.
Used Kernel Wipe and ROM Nuke for extra cleaning power.
Reinstalled the Kernel AJK and SHOstock3 ROM
Haven't installed any themes though I had Johns Blue and Villians Poison Base Theme (I believe that is what it is) on there when this all went down. Should I put them back on there?
Password still pops up. So what it looks like is that unless I stick with the unencrypted portion of the phone, I am screwed with any custom ROMs as the correct password has the phone restart and then stick at the Samsung Galaxy S2 Splash Screen. Apparently I still cannot access that area of the phones memory to wipe it at all no matter what I do. I need to access it somehow. Really driving me crazy and thinking I may need to talk with AT&T(as Samsung told me to earlier this morning lol) and see what they can do.
One thing I do notice is when I use your stock root program it actually removes the encryption or decrypts the section of the phone for the stock ROM to go on the phone which is cool.
Eagle
Any other things to try from anyone is greatly appreciated.
Been away all day. Sorry, I can't offer any other suggestions, but I have no experience with encryption. As you said, what you need to know is where the encryption is stored in memory so you can wipe or format that and restore it to original. If you can get to the right person, probably not level 1 tech support, then maybe you can find out. Somebody somewhere knows the answer to this.
would restoring my original EFS before this whole process help or is the encryption section totally blocked off?
WarEagleUS said:
would restoring my original EFS before this whole process help or is the encryption section totally blocked off?
Click to expand...
Click to collapse
I have no idea whether the encryption is stored there. What kind of efs backup did you take?
creepyncrawly said:
Been away all day. Sorry, I can't offer any other suggestions, but I have no experience with encryption. As you said, what you need to know is where the encryption is stored in memory so you can wipe or format that and restore it to original. If you can get to the right person, probably not level 1 tech support, then maybe you can find out. Somebody somewhere knows the answer to this.
Click to expand...
Click to collapse
Thx bro. yeah I need to run some forensic tools and see if I can mount the whole phone system on my PC and run the tools.
creepyncrawly said:
I have no idea whether the encryption is stored there. What kind of efs backup did you take?
Click to expand...
Click to collapse
a full efs backup. I made two or three actuakky using advanced efs, nitrality, and recovery.
WarEagleUS said:
a full efs backup. I made two or three actuakky using advanced efs, nitrality, and recovery.
Click to expand...
Click to collapse
A little research indicates that there is quite a bit of stuff stored in efs besides carrier specific data. So maybe encryption could be in there. Of those tools, nitrality for sure and maybe advanced efs should be able to restore the entire efs partition. If you are comfortable with the risk - a damaged efs would render the phone useless - then you might try this to see if it clears up the encryption issue. BTW, you should learn how to back up the efs partition yourself using terminal and linux commands.
creepyncrawly said:
A little research indicates that there is quite a bit of stuff stored in efs besides carrier specific data. So maybe encryption could be in there. Of those tools, nitrality for sure and maybe advanced efs should be able to restore the entire efs partition. If you are comfortable with the risk - a damaged efs would render the phone useless - then you might try this to see if it clears up the encryption issue. BTW, you should learn how to back up the efs partition yourself using terminal and linux commands.
Click to expand...
Click to collapse
Yeah I should have used ADB to do that from the get go. I should have used the wife's laptop like I started to instead of my WIN 8 machine has it seems to be finicky with Android SDK (the portion at least needed to run ADB). Linux commands really aren't much different than terminal and I have done both. I was actually trying to get fastboot commands to work but my bootloader wasn't cooperating and for the life of me I couldn't find how to unlock it. I may try restoring that EFS. If nothing else I would love to be able to format that EFS and replace it with my original copy though as you said a damaged EFS may actually cause issues (who knows if it is damaged). I do know that I am fixing to chat with AT&T support. I hope I don't have to drive down to Hoover, AL to the repair facility. I would rather them send me a phone and send this one back. I am on stock 4.0.4 ICS from AT&T and any root that may be on there (though I doubt there is now) I can remove and what not
Thanks for the advice and insight Creepy. I know you tried like hell to get me an answer but in doing research on here with other problems I found out some useful information going forward my friend.
Eagle
Well, looks like I will be getting a special early upgrade and the wife will as well. I will be keeping this phone, however, to mess with this and see if I cannot get this problem fixed. Thanks Creepy so much. I appreciate your research and help more than you know. If possible I would love to keep this thread open for a while just in case I figure this out and fix the issue. It may take me a week or so but I will get back to messing with it again.
A side note. You don't need the whole sdk to get adb. You can download just the files you need from my signature.
Sent from my SGH-I777 using xda premium
I have a s4 schi545 and used the all in one tool for rooting my phone. It worked successfully, so I ran the install twrp 2.5.0.2 I then went to the cyanogen website and put a rom on my phone in a folder and tried to load it onto my phone. The cm loading screen just loops endlessly and I cannot get my phone back on, can someone please help me I am starting to freak out a bit.
edit:
I got it to open with recovery mode, now is there a way I can have it boot into the 'default os' ?
You flashed cyanogenmod in, so the stock rom is gone (unless you actually performed a nandroid backup which you could restore if you did). You are going to have to mount your phone to a PC and load a different rom to flash.
bhellings said:
I have a s4 schi545 and used the all in one tool for rooting my phone. It worked successfully, so I ran the install twrp 2.5.0.2 I then went to the cyanogen website and put a rom on my phone in a folder and tried to load it onto my phone. The cm loading screen just loops endlessly and I cannot get my phone back on, can someone please help me I am starting to freak out a bit.
edit:
I got it to open with recovery mode, now is there a way I can have it boot into the 'default os' ?
Click to expand...
Click to collapse
Did you do a factory reset when loading the new ROM? You can't carry data from one ROM to another. If you really want to go back, as stated above you'll need to use Odin to flash the stock firmware.
You may have to go back to stock if you didn't make the backup and start over.
You can restore your phone to factory here
http://forum.xda-developers.com/showthread.php?t=2301259
Just make sure you follow the Op's directions carefully...
He didn't wipe ..
Sent from my SCH-I545 using Tapatalk 4 Beta
Thanks alot.
Before I went to sleep last night I rebooted in recovery and did a data wipe, I had no idea you had to clear the entire os and am happy to know the stock os is now gone, I was going to ask that today. What do you guys think of CM 10?
Thank you all so much.
OK. So. I've been encountering nothing but problems since I received my Huawei Ascend P2 phone.
To begin with -
I bought the phone for the sole purpose of it being 4G/LTE. When I got it, I couldn't figure out how to get it, so I contacted Three and was told that my phone had to be 4.3 - it was running 4.1.2.
When I tried to get 4.3 through whatever means, it stopped working.
I tried to do a complete factory reset and now I'm getting many more problems -
I keep getting errors that anything Google related has stopped working (especially Google keyboard).
My contacts won't auto-sync, despite me having my Google account synced up with it.
The icons at the bottom of the screen (back, home, settings/whatever else) won't light up and the home button isn't working.
It's a different loading screen than normal - before it was a Huawei Ascend splash screen, now it just says "Android".
It is not being detected by my laptop whatsoever.
When I try and download anything using a browser, it says "starting download" but nothing works.
So, anyone have a solution? It is driving me demented. And all because I wanted bloody 4G.
boneyarsebogman said:
OK. So. I've been encountering nothing but problems since I received my Huawei Ascend P2 phone.
To begin with -
I bought the phone for the sole purpose of it being 4G/LTE. When I got it, I couldn't figure out how to get it, so I contacted Three and was told that my phone had to be 4.3 - it was running 4.1.2.
When I tried to get 4.3 through whatever means, it stopped working.
I tried to do a complete factory reset and now I'm getting many more problems -
I keep getting errors that anything Google related has stopped working (especially Google keyboard).
My contacts won't auto-sync, despite me having my Google account synced up with it.
The icons at the bottom of the screen (back, home, settings/whatever else) won't light up and the home button isn't working.
It's a different loading screen than normal - before it was a Huawei Ascend splash screen, now it just says "Android".
It is not being detected by my laptop whatsoever.
When I try and download anything using a browser, it says "starting download" but nothing works.
So, anyone have a solution? It is driving me demented. And all because I wanted bloody 4G.
Click to expand...
Click to collapse
I think we need some more info on the attempt to upgrade via whatever means. What steps / guide were you following? Did you install a custom rom? If so, what rom and what recovery are you using? From a few minutes of searching around, it seems that there is no official 4.3 update for the phone, and just being ON 4.3 itself will not automagically enable LTE service as this has much to do with the radio/baseband used as much as the actual operating system and that will not get updated via a custom rom (99.999% of the time unless SPECIFICALLY stated). Seems like they are working on an LTE capable update/patch for 4.1.2 soon according to this: http://forum.xda-developers.com/showpost.php?p=50495570&postcount=162 (that post is part of a thread about your phone on a UK carrier so should be pertinent).
es0tericcha0s said:
I think we need some more info on the attempt to upgrade via whatever means. What steps / guide were you following? Did you install a custom rom? If so, what rom and what recovery are you using? From a few minutes of searching around, it seems that there is no official 4.3 update for the phone, and just being ON 4.3 itself will not automagically enable LTE service as this has much to do with the radio/baseband used as much as the actual operating system and that will not get updated via a custom rom (99.999% of the time unless SPECIFICALLY stated). Seems like they are working on an LTE capable update/patch for 4.1.2 soon according to this: http://forum.xda-developers.com/showpost.php?p=50495570&postcount=162 (that post is part of a thread about your phone on a UK carrier so should be pertinent).
Click to expand...
Click to collapse
Thank you for your reply.
I'll talk you through the steps I took as much as I can.
Firstly I rooted the phone using eRoot, which did work and allowed root access.
I then downloaded P2Tools, which was obtained from this thread and it allowed me to put CWM on it.
Once this was done, I attempted to put CM 10.2 on it, but kept getting a Status 7 error. Some quick Googling later, I discovered this video, which showed how to solve it.
When I followed the steps on there, I kept getting a Status 0 error.
That was when I started to encounter those problems, so I wiped everything I could, even system, but that part failed.
And that's about it.
boneyarsebogman said:
Thank you for your reply.
I'll talk you through the steps I took as much as I can.
Firstly I rooted the phone using eRoot, which did work and allowed root access.
I then downloaded P2Tools, which was obtained from this thread and it allowed me to put CWM on it.
Once this was done, I attempted to put CM 10.2 on it, but kept getting a Status 7 error. Some quick Googling later, I discovered this video, which showed how to solve it.
When I followed the steps on there, I kept getting a Status 0 error.
That was when I started to encounter those problems, so I wiped everything I could, even system, but that part failed.
And that's about it.
Click to expand...
Click to collapse
K. So you are still on the stock rom, rooted, with CWM recovery (which version?), and after you attempted to wipe /system, it failed to wipe (what was the error message there?), and now it boots and has all kinds of weird glitches? First thing to try would be to go back to CWM and wipe Cache and Dalvik Cache and then Fix Permissions. This MIGHT help. If it doesn't then you will just probably want to throw a stock rom back on there to get back to running right again.
es0tericcha0s said:
K. So you are still on the stock rom, rooted, with CWM recovery (which version?), and after you attempted to wipe /system, it failed to wipe (what was the error message there?), and now it boots and has all kinds of weird glitches? First thing to try would be to go back to CWM and wipe Cache and Dalvik Cache and then Fix Permissions. This MIGHT help. If it doesn't then you will just probably want to throw a stock rom back on there to get back to running right again.
Click to expand...
Click to collapse
I've wiped the Caches and Dalvik Cache and can't seem to find "Fix Permissions". I did some searching and it seems this feature was removed from CWM? I'm running v6.0.3.7 of CMW.
When I try to format the system, it says
E:format_volume failed to unmount "/system"
Error formatting /system!
Weird, they did take it out. Koush said it was a placebo. Which normally I would take as law, if it weren't for many times I have ran fix permissions and it caused apps that were force closing to not force close anymore. But whatever, if you wanna try, flash this: http://db.tt/9aWdF8Rp. It'll either help fix something, or do nothing. Won't make it any worse. If it can't mount to format though, it's either or a bug with CWM for your device, or after factory reset, reboot recovery and try again. But you really don't want to wipe /system unless you have a nandroid or another rom on your storage that is accessible.
Thanks so much for your help so far. Took me ages to figure out how to get that file on my phone, but I managed to do it. I then installed zip from recovery mode and chose the fix_permissions. Then reboot and it asked me to root the phone again. It's now upgrading and hopefully it will work now.
It is still saying "Unfortunately, Android keyboard has stopped" and other things. What do you reckon I can do now? You're right, it seems like I can't make it any worse.
boneyarsebogman said:
Thanks so much for your help so far. Took me ages to figure out how to get that file on my phone, but I managed to do it. I then installed zip from recovery mode and chose the fix_permissions. Then reboot and it asked me to root the phone again. It's now upgrading and hopefully it will work now.
It is still saying "Unfortunately, Android keyboard has stopped" and other things. What do you reckon I can do now? You're right, it seems like I can't make it any worse.
Click to expand...
Click to collapse
Ok. So looks like first thing to check is to see WHICH version of the P2 you have because it seems like there are at least 2 different sub versions of it. The P2-6070 and the P2-6011. Please go to Settings / About Phone/Device and let me know all the software info there.
Also, have you unlocked the bootloader (I'm guessing so since you have recovery, but just checking)?
I found some more info on how to get you back up and running, but want to confirm the system version so everything goes as smoothly as possible. There's a new update that just came out not too long ago that people are saying LTE works on, so hopefully we can get you to that point.
es0tericcha0s said:
Ok. So looks like first thing to check is to see WHICH version of the P2 you have because it seems like there are at least 2 different sub versions of it. The P2-6070 and the P2-6011. Please go to Settings / About Phone/Device and let me know all the software info there.
Also, have you unlocked the bootloader (I'm guessing so since you have recovery, but just checking)?
I found some more info on how to get you back up and running, but want to confirm the system version so everything goes as smoothly as possible. There's a new update that just came out not too long ago that people are saying LTE works on, so hopefully we can get you to that point.
Click to expand...
Click to collapse
Mine is the P2-6011.
Swear if we get this working, never changing anything ever.
Yes, the bootloader is unlocked.
Alright, so here is a link for the newest firmware for your phone :
http://huaweidevices.ru/ROM4221/P2/...R001C00B038CUSTC19D001_United_Kingdom_H3G.rar
Need to be on stock recovery. Unpack the rar file and put the whole folder /dload on the root of the SD card. This has the update.app that should take care of everything for you. Turn off the phone and turn it on by holding Vol + and - and Power together. This is supposed to boot it into the mode to take care of the update for you.
If you don't wanna go back to complete stock, I have another way that involves switching to TWRP recovery and restoring a rom via nandroid restore. If you'd prefer that, lemme know and I'll shoot you the links.
es0tericcha0s said:
Alright, so here is a link for the newest firmware for your phone :
http://huaweidevices.ru/ROM4221/P2/...R001C00B038CUSTC19D001_United_Kingdom_H3G.rar
Need to be on stock recovery. Unpack the rar file and put the whole folder /dload on the root of the SD card. This has the update.app that should take care of everything for you. Turn off the phone and turn it on by holding Vol + and - and Power together. This is supposed to boot it into the mode to take care of the update for you.
If you don't wanna go back to complete stock, I have another way that involves switching to TWRP recovery and restoring a rom via nandroid restore. If you'd prefer that, lemme know and I'll shoot you the links.
Click to expand...
Click to collapse
If I ever meet you I definitely owe you a drink. Did exactly as you said and everything (from what I can tell) is working.
It's one of the things I love about Android phones - unless you do some serious damage to it physically, for the most part it is fixable.
So, thanks button isn't enough - you saved me giving up and buying a new phone
*Hi Five* Glad all is well!
But yea, I do this for a living. Seriously. Helping people on here is how I stay sharp. lol
getting a gateway 504 error from link to firmware, would love to get this update working as i keep getting a notification on phone saying update available but it wont work
boneyarsebogman said:
Thank you for your reply.
I'll talk you through the steps I took as much as I can.
Firstly I rooted the phone using eRoot, which did work and allowed root access.
I then downloaded P2Tools, which was obtained from this thread and it allowed me to put CWM on it.
Once this was done, I attempted to put CM 10.2 on it, but kept getting a Status 7 error. Some quick Googling later, I discovered this video, which showed how to solve it.
When I followed the steps on there, I kept getting a Status 0 error.
That was when I started to encounter those problems, so I wiped everything I could, even system, but that part failed.
And that's about it.
Click to expand...
Click to collapse
Can you post the link of the CM 10.2 rom For huawei P2.
I search for a long long time. but still dosnt found a rom.
Thx
Sorry for digging this up but does someone have the stock ROM of the P2? Im stuck like the fella who started this thread and havent found the stock ROM anywhere.
Thanks for the attention.
So I'm very new to all of the rooting stuff. I got an HTC 4G LTE off Ebay just to use as sort of like a tablet. The firmware on the phone kinda sucks so I wanted to root it and go with a better version of Android that the bloatware-inflated version HTC provides. Not to mention updates are no longer supported.
I successfully rooted the phone with TWRP and followed the instructions to wipe the phone and such. This is where the instructions I found were kinda "off" and started using way too much lingo so I decided to wing-it a bit, thinking I had sort of understood it. I went to install, installed the BeanStalk and Gapps zip folders that are available in the the other section.
Rebooted my phone and it wouldn't go past the HTC boot logo... So I tried again. No luck.
I managed to get back in TWRP and I'm wondering what I need to do in order to get this bad boy to work. I checked the troubleshooting threads and found the section on boot-looping, but so I did the cache wipes it stated, selected "Factory Restore" and it rebooted back into TWRP. I'm not really sure what to do. Do I re-install the BeanStalk and Gapps zips, or am I missing something?
Thanks for any help.
If the phone is S-on you'll have to flash the kernel separately from the ROM itself. Hit the top link in my sig and read the entire guide. I think it will be quite useful to you:thumbup:
I thought you guys might find this amusing, and hopefully it will help some people that get into a similar situation as myself. First, a little background - I rooted and installed Alliance Rom years ago back before the bootloader was unlocked. This worked amazing for me for a long time but I've recently had some weird issues with my phone so I decided to do a factory reset.
I went into settings, clicked factory reset, and then my phone got into a boot loop on recovery. I remember from before I had to do a regular boot then click recovery at the prompt instead of doing the factory recovery so I did that.
Instead of doing a normal wipe, I wanted to wipe everything on my phone and start from scratch so I did the full wipe (in what I think was TWRP or safestrap or whatever). When I went to reboot my phone it had a message like "are you sure? there's no OS installed" and I clicked ok. Well now I couldn't get the phone to boot into anything except download mode so at least I can use Odin.
I'm frantically searching google to try and find ways to install some sort of recovery so I could load AllianceRom again since I still had the zip file for it. Eureka, I found TWRP for my phone! I tried to flash TWRP through Odin but that doesn't work because my bootloader wasn't unlocked.... I remember this from last time ... all of the places I found online to install any sort of recovery required the phone to be booted into android.
So I'm clicking around and someone has a recovery randomly posted in a thread so I install it thinking, what the hell, what's the worst that could go wrong. So I install it through Odin and boot into normal recovery and I get this message saying my phone has been tampered with and to go to a verizon store immediately! Oops... upon further investigation (looking at the download screen), I tripped the knox flag... oh well, it's not like my phone is in warranty anymore (I got it on release day).
I search around looking for what I should do next and I found a thread that talked about being on complete stock, rooting, then unlocking the bootloader. I download all the files I need (newest firmware here - https://www.sammobile.com/firmwares/galaxy-note3/SM-N900V/ and thread here - https://forum.xda-developers.com/ve...guide-ob6-of1-root-bootloader-unlock-t3439010) to go back to stock and flash in Odin. Actually I didn't download from sammobile.com because it was downloading too slow so I just googled the file name and found it somewhere else faster, go figure.
Everything seems to be going ok then all of a sudden FAIL in Odin... Ahhh what the heck do I do now? Try again obviously! Second try works woo hoo! Phone start booting up, things are looking good!!! hooray!! But wait... it's taking forever to start and it's stuck on the Verizon logo... uh oh... taking way too long to boot up so I pull the battery and try again. Boots right in saying that android is upgrading so I think I'm finally in the home stretch here.
I try to run the ArabicToolApp for Root but I installed the latest firmware which isn't supported DAMN IT! Downloaded the correct firmware (OB6!), flashed in Odin, same problem before where it was stuck on the red verizon screen, pulled battery, rebooted, finally time to get root!
Phone finally boots into OS and I get a popup "unfortunatley com.google.process.gapps has stopped" great... and it keeps coming up over and over again after I hit ok... just my luck! Reboot again to see if that fixes the issue. Seems weird that I didn't have to go through all the initial setup stuff I did on the other version I installed... hmm... or maybe it was because I pulled the battery on the red verizon screen? Whatever. I somehow manage to get to options to do a factory reset and I let the verizon screen stay on a while this time. I'll go take my contacts out and give my wife some love while I wait
Come back and the phone is at the setup wizard, this is good news. Enabled USB debugging, installed root, done! Thank god!
Next I want to unlock the bootloader. I follow the steps here which aren't very clear (I'm guessing on purpose for novice computer users) - https://forum.xda-developers.com/ve...l/official-note-3-verizon-bootloader-t3359370
1. I installed eMMC from the play store to make sure my CID started with a 15, it does so I know I'm good to use the hack.
2. I installed both files in the unlock kit (adb and driver setup)
3. Fired up adb, navigated to where I had unlock_n3, and ran through the first part of the code once, reboot my phone, checked that the CID was the developer CID, and then ran the second part of the code three times before it worked
I verified the bootloader was installed correctly by trying to install TWRP through Odin, which worked!
I'm going to try out Jasmine Rom since it's a popular one that is on 5.0. My SD card only showed 30 megs free or something like that, so I formatted it from within android and copied the zip file over and installed the Rom through TWRP. Rom installed just fine, so I did one last factory reset which worked great and I think I'm finally good to go!
If you have any questions or run into any issues feel free to reply here and I'll try to help as much as I can.
Glad it worked out for you in the end.
From making a few mistakes I know that sinking feeling "oh no, what have I done?"
FWIW, the bootloader unlock method (in principle) works from nearly ANY ROM which is rooted - so, you would have saved yourself a bunch of time if you had started with that before you wiped the Alliance ROM. So long as you have root and a CID value that starts with 0x15, you just need root privileges - no need to return to stock and re-root.
(The "in principle" part is that there were several bugs in the "safety checks" portion of the unlocker binary that were sensitive to the OS revision, so you might have to search through the unlock thread to find a version of the unlock binary that is compatible with whatever rooted ROM is on the phone when the unlocking is attempted.)
good luck
PS The AryaMod ROM (w/ phantomOne kernel) is pretty solid - Marshmallow w/ S-Pen apps, too! As with any other dev ROM, there are a few sharp edges, but mostly everything works (except NFC).
.