Am using a novotech android tablet window 7.
But any time I on it it's does not boot and its stay on like that until the battery is down before its off.
What can I do?
You mean Novatech nTablet with Windows 7 and Android in dual boot?
Does It show any errors?
Could you take any picture?
Could you describe the details of the problem?
Do you think you caused the error? How?
I don't think anyone can help you without more info...
EDIT:
You say your android is not booting... windows is fine?
If only your android is not booting, you might have softbricked it, but I have no idea how that tablet works...
Related
Hi guys I have an Evesham 7211 sat nav unit which uses win ce 4.2 but the unit freezes after the boot up screen is displayed.
I have a dump.bin of this device but cannot connect to the pc with it.
Does anyone know how I can flash this rom file back to the device to get it to boot again ?
help
bump common guys help me out please
Most likely there is nothing you can do, if device does not have a hard-reset option - you're out of luck.
Hey guys i have a archos gen8 tablet. It will not boot into android at all. I have downloaded the legacy android version and installed it through recovery but it just hangs on the archos, entertainment your way screen. I can boot into the SDE just fine but no android. I searched around on this site for maybe someone else with a similar problem but i found nothing.
Has anyone heard or seen this problem before? I read maybe it could be an issue witht eh bootloader but if so why is it booting the SDE just fine? Im really at my wits end with this thing and any help at all would be greatly appreciated!!!
What have you done really and in which order?
Did you eventually format the device and then istalled SDE?
Hi, my father has a Telechips 8902 based tablet (It's absolutely horrible!)
I decided I would put CM7 on it for him using the build at http://androtab.info/telechips/firmwares ..
I flashed it through Fastboot, however CM won't boot at all.. Just stays at the Android boot animation,
I've already tried formatting the data partition to no avail..
I've ran and uploaded logcat to http://pastebin.com/q4fdWfT7 and continues at http://pastebin.com/3xcia9Qs
Could someone who knows what they're doing have a look and see if they know whats wrong?
I'll be eternally grateful
Thanks
Hello everyone. This is a long story, so thanks in advance to read it and try to help me.
I've got a Trekastor surftab Ventos 8.0 this one --> http://www.trekstor.de/detalles-de-surftabs/product/272.html?file=tl_files/generatedPdf/272-de.pdf
model st80208-2 . I'm not sure if it is the 8 or 16 GB. And I don't know how to check it because the tablet is bricked.
How did I brick the tab?
This is a good question. I had lost the charger and I tried with another one with a higher voltage. This ruined the batery. And when I found the charger the tablet show a strange behaviour. It was trying to start but reboot before to finish. I was able to finish a full boot but the batery only works for a few minutes. After solve the batery problem, now I can start the tablet without problem about the voltage but, it seems like all this failed attemps to boot have made some damage somewhere.
What I have now?
The tablet start. It show's the trekstor logo. After that it show's the android logo, and that's all. It stuck's looping in the android logo.
What I have tried?
Everything.
1.- Custom recovery. http://forum.xda-developers.com/showthread.php?t=2039964 or this http://forum.xda-developers.com/showthread.php?t=1995984
This method not working in my tablet even when it was not bricked. (I tried it, when I was trying to get root access a month ago).
Power + Volumen (-) gets nothing at all. It's start normally. (and loop in my currently situation)
Power + Volumen (+) gets this screen http://cdn.howtogeek.com/wp-content/uploads/2012/12/android-recovery-mode.jpg and anything happens no matter what button I'm pressing even with the custom recovery in the sdcard.
2.- I tried to flash the tablet, but I didn't find information about how to do it and trust me, I have searched a lot.
I triend with this software: "Amlogic Image Burning Tool v.1.6.2.2" and this firmware http://forum.xda-developers.com/showthread.php?t=2039964 . But I get the error "find no upgrade config, please load it manually". I'm pretty sure I doing something wrong, but I have no experience with this software or flashing in general.
That's all for now I'm tired of reading this forum and this other one in german. (thanks to google translator) http://www.android-hilfe.de/surftab-ventos-8-0-forum/ and I did not find anything useful for me
You people are my only hope. (Any Star wars fan in the room?:laugh:
So any help would be wonderful, thanks in advance and sorry for my mistakes, english is no my mother language.
Hello XDA! (especially to admins and Filipino users).My Tablet is rooted using Kingroot(PC) and I replaced it with SuperSU. I need help with my tablet. I ruined my Android's system because I deleted and replaced some apks' in the system/app folder. I have been searching Google for an Official Firmware but there is no any for my tablet because it is a new unpopular yet tablet. My main problem is that it enters the Android system for 3 seconds and it shows a windows like "Android is upgrading" and a loading circle. It shows like a "Half Bootloop" because it does not boot completely. My Android version is Jellybean 4.2.2. I don't know what to do. I know how to flash but, how can I flash if it keeps bootlooping. Although I'm not giving up yet because I can still access the "Droidboot" and the "Default Android Recovery". Please can anyone help me? Especially the Filipinos? Sorry for my bad English because I'm panicking(The tablet is not mine).