Related
Hello,
just bougth a low-cost and really little android phone: Alcatel OT-980. It's quite cheap as long I bought for 79 gpb from new. And it has quite nice specs:
-CPU 600mhz
-256 Rom / 192 Ram
-Android 2.1
-Slide-out QWERTY keyboard
Anyone is working on it? Is it possibile to have root access? What about a new page on XDA for it?
Let's start talking about it guys
So guys no one is interested in it?
I just purchased one of these things and it has a strange fault - the "hang-up" button seems to be constantly depressed so it's always trying to shut itself down. If I hold that button down it goes back to normal, it's like the button logic is in reverse or something.
Has anyone heard of this? It's nearly impossible to get Alcatel support in Australia.
Same one was just released on WIND Mobile in Canada.
Cool
Are you planning to buy one?
Nope, I have all the Androids I need for now.
Sent from my Nexus One using XDA App
I have the OT-981a (Wind version)
It's just another simple android phone.
Alcatel made some changes to the OS.
Took out the update feature (Probably because they will never support updates)
No live wall papers even though the software is installed.
It is running 2.1 update 1
The usual start up to get to programing mode
(Volume down + power) only restores the phone.
Think it would be pretty damn hard to make a rom for this.
Plus not a popular device so don't hold your breath as much as I would love to find a rom to work on this it is not likely.
Note universal androot does work but the NAT Filter is missing so no Wifi tethering ether
djtyres said:
I have the OT-981a (Wind version)
It's just another simple android phone.
Alcatel made some changes to the OS.
Took out the update feature (Probably because they will never support updates)
No live wall papers even though the software is installed.
It is running 2.1 update 1
The usual start up to get to programing mode
(Volume down + power) only restores the phone.
Think it would be pretty damn hard to make a rom for this.
Plus not a popular device so don't hold your breath as much as I would love to find a rom to work on this it is not likely.
Note universal androot does work but the NAT Filter is missing so no Wifi tethering ether
Click to expand...
Click to collapse
- Is there a bootloader mode in addition to this "recovery" mode?
- If it's rootable, and the bootloader is not locked, there is still some chance a custom recovery could be installed. The question is how many devs care to make a recovery and ROM specifically for this phone.
That is exactly my point no one would take the time for this device.
I tried to the usual bootloader sequence but just reset my phone.
Unless it needs the usb plugged in
What if there's another combo that involves booting up while holding one or two of the hard keys?
Sent from my Nexus One using XDA App
I have this phone too and I am really interested in any development
Hard Reset
Anyone know if there is a button combination for a hard reset?
Customer downloaded a brightness app on market and the "0" setting forced his screen to go black. Phone still runs in the background but you don't know where/what you're doing.
Help?
MY_TD2 said:
Anyone know if there is a button combination for a hard reset?
Customer downloaded a brightness app on market and the "0" setting forced his screen to go black. Phone still runs in the background but you don't know where/what you're doing.
Help?
Click to expand...
Click to collapse
Upthread it is reported that power + volume up results in some sort of factory reset. I wouldn't know because I don't have the phone.
Here is an alternate idea, but you'll need someone's help to tell you roughly where to tap on the screen or how many up-down strokes it will take.
- Unlock the phone (swipe, you'll feel the vibration)
- Press Home a few times so you're on your main homescreen.
- Is the Power Widget on one of your homescreens? If so, some hunting and pecking can probably get you to tap on the Brightness icon.
- If not, you may be able to long-press and add a widget blindly, and hopefully that widget will be the Power Widget.
MY_TD2 said:
Anyone know if there is a button combination for a hard reset?
Customer downloaded a brightness app on market and the "0" setting forced his screen to go black. Phone still runs in the background but you don't know where/what you're doing.
Help?
Click to expand...
Click to collapse
Volume Down + Power is hard reset to factory defaults.
It's what the usual recovery combo is on most android phones lol
backup / fs image
I've done a bit of hacking on my phone, got root, and used the adb shell to install busybox etc.
I'm trying to find a way to get a proper image out of the phone, I'm guessing that I can statically compile dd for it, and create dd images of the different partitions of the nand, on the SD, then loop mount them on a linux machine for development.
If there's an easier way, then I'd like to know about it
Based on that I imagine it would be possible to add in some of the changes that the G1 recovery images have for our phone.
Which version of busybox did you install?
Im going to try and catch up here lol
Is there any way to get the stock rom anywhere, or can anyone get them from the phone?
Ok I have found busybox as well as installed it,
I also sent an email asking if we could get support for the ot-981 from clockworkmods (Rom Manager) fingers crossed here.
That way we can a back up of the original rom
I'm trying to get the image off, dd doesn't work because the mtd block devices can't be read (perhaps because they are mounted, but I would still expect dd as root to be able to read them), and tar doesn't help much, because the tar function in busybox doesn't interpret the --exclude or -X parameters to exclude the sdcard dir (to avoid a recursive tar), and to exclude /proc and /dev and /sys.
I'm going to try to cross compile tar for android and hope to get a backup out that way.
Hi guys new to the scene and planning to get this phone as a low budget andriod device.. I hope you guys will be able to find a way to develop for this phone and more importantly upgrade it. It would be a big help! Thanks for all your hard work so far!!!
I rooted mah Prime (TY Viperboy and contributing dev's!) and finally installed Font Changer. After I selected the font I wanted, obviously I re-booted....and re-booted..and etc. My TFP won't get past the ASUS boot animation, the circle just keeps spinning and spinning. I tried wiping user data and still nothing. Does anyone have a similar experience or advice? I didn't change the density or anything else, just the font.
I also tried the reset button a few times just in case and still the same thing. Android Commander doesn't see it when I connect either, Windows tried to install drivers for it(which i've obviously already installed) and kept getting an error.
98 views...am I the only one who has used Font Changer on the TFP? Do any of you vets on here have an idea how I might be able to boot the device or at least completely revert it to all factory settings/apps? I apologize for having a one sided conversation, but I really would like to use mah Prime again. Thanks!
Sent from my SPH-M900 using XDA App
I use Font Changer and haven't had a problem yet.
Hmm...Well I opted to re-boot from Font Changer after I changed fonts. Did you do the same?
pappasquirrel said:
Hmm...Well I opted to re-boot from Font Changer after I changed fonts. Did you do the same?
Click to expand...
Click to collapse
Yes. I don't know what to tell you.
Anyone know if there is a file I could put on my sd card that the TFP would boot from, like how PG86IMG works w fastboot?
not sure, but i would suggest you to get the newest update from their site, then pop it on a micro sd, (or sd if you have the dock) and try holding power and vol up .... or maybe power vol down, dont remember..
now when you download the zip from asus site, make sure to unextract and copy the zip after you unextract. It's a zip in a zip.
Then try with the zip as its labeled, maybe it'll work or rename to update.zip.... that seems to be the norm on other devices.
good luck, i hope it works so we can have another solution for those that this happens to. Can't wait for unlocker tool, so we can get a recovery on this and if that ever happens we can just do a restore. good luck!
Good idea, thanks! I will give that a go and report back soon. I know I had this problem once or twice on my EVO3D and Moment, I would have to do something similar and try again. I'm hoping for good news to report
keep us updated, I am sort of in the same boat. Mine wont boot up after last firnware update and I have been searching to see if I can make it read the update file from SD
btw, try volume up with power, then hit volume down.... maybe it'll just do a recovery with the image it already has
damn i dont know if its volume up or down.... anyone ever tried this? i dont have my tab with me...to test
Its vol dwn+power for recovery. it will ask to press vol up within 5 sec to enter RCK, I've done that and "andy" just lays there on his back w an exclamation mark coming out of his chest.
If you wait, you get a screen with 10 seconds to select one of two options, User Data Wipe and linex cold boot. I've tried both with no avail. One more thing I found out is since my Prime just stays at the loading screen, everytime I hold power or reset button it would just reboot and hang there again. Aside from letting the battery die the only option I've found to shut down is hold vol up+power till it vibrates, keep em dwn for 2 more seconds and it will shut down.
Sent from my SPH-M900 using XDA App
Font Changer, now TFP won't boot.
My Asus Prime is in the same situation as yours. A rooted it and install Font Changer, after reboot my TFP won't get past the ASUS boot animation. I tryed all the things you do, but Android doesen´t start.
I install APX driver in Windows 7, and when i connect the USB cable, the device is reconized in Windows Device Manager, but a can not acess the tablet.
I don´t know a method the acess the Tablet from microSD, do you know ?
May be BOOTLOADER UNLOCK release from ASUS solve it.
Good luck for us.
Still nada. Windows will reconize that its plugged in, but I get a code 43 or code 10 and can't access the TFP in anyway (that I know of). I asked the same question over on Transformerforums.com and member leeshor has been really helpful. Most of the idea's I was given I had already tried or I could not get to work for my specific problem, but I'm sure that the info will be helpful for a lot of you guys. Here's a link to my thread, check leeshor's sig for some helpful tips. http://www.transformerforums.com/forum/transformer-prime-help/15428-font-changer-now-wont-boot.html
I'm still workin' on it and I'll post if I am able to make any progress, good luck!
Data wipe will definitely not work in this situation as it does nothing to the /System which is where the font's are stored. My best guess is that the font was changed but the permission was not correctly written, had this problem in the early days of my Desire HD.
The only solution that will work, is if you can get into an ADB shell and either put the original fonts back or change the permissions to the correct permissions.
Doktaphex said:
Data wipe will definitely not work in this situation as it does nothing to the /System which is where the font's are stored. My best guess is that the font was changed but the permission was not correctly written, had this problem in the early days of my Desire HD.
The only solution that will work, is if you can get into an ADB shell and either put the original fonts back or change the permissions to the correct permissions.
Click to expand...
Click to collapse
That's what I figured, I just can't get windows to recognize it. When I connect via USB and the device is off, windows sees it as an unknown device(obviously) and that the drivers are fine. After I power it up, windows will either recognize it as an MTP device and when I try to access the tab or re-install the drivers I get a code 10. Or it will still show up as an unknown device with an "!" giving me a code 43. Is there any other way I can gain root access?
It's been awhile (or seems so) and I still haven't had any success. Has anyone else made progress getting back to a usable device??
Ok, so before I send my prime in...do any of you smarty pants know (guess is fine) if this lil problem some of us are having will have a solution when ASUS unlocks the bootloader? Unless there is some kind of boot.zip err something that will load up from stock recovery, I don't think it will change anything. Thoughts? Advice? Bueller?? Thank you in advance
Sent from my SPH-M900 using XDA App
Unlock-bootloader.apk....I guess that answers my question to whether i'd be able to fix permissions from recovery :/ What am I not seeing? There has to be a way to get these Primes w no adb access and a stuck boot screen to fire up...?
Sent from my SPH-M900 using XDA App
Have you tried the blob file from SDcard trick. I believe you rename the update to EP201_SDUPDATE.zip and it should be able to run from the RCK. It has to be on a micro sdcard though otherwise it doesn't work apparently.
As outlined here:
http://forum.xda-developers.com/showpost.php?p=22743057&postcount=119
Well, I have a d2pad SN 201301 on the back so its somewhat new
It uses rk2829 rockchip.
Anyways Ive been trying to get recovery on it for the past couple hours to use a new rom, finally got recovery working, did everything installed my rom, and let it restart.
Well, The rom isnt compatible, there was a later version a few pages into the thread that might have been, but the one I got wasnt.
So now I'm stuck, at the intro d2 logo
I only have 1 button and it is power.
Ive tried to get adb working, because it at least says its connected, but with no success anyone have any ideas?
wzzupp548 said:
Well, I have a d2pad SN 201301 on the back so its somewhat new
It uses rk2829 rockchip.
Anyways Ive been trying to get recovery on it for the past couple hours to use a new rom, finally got recovery working, did everything installed my rom, and let it restart.
Well, The rom isnt compatible, there was a later version a few pages into the thread that might have been, but the one I got wasnt.
So now I'm stuck, at the intro d2 logo
I only have 1 button and it is power.
Ive tried to get adb working, because it at least says its connected, but with no success anyone have any ideas?
Click to expand...
Click to collapse
Hey, I realize that it's been a couple years since you posted this question. I never saw any responses. So how did it all end?
Also, there was one critical piece of information you failed to share with the XDA community...you said you worked on getting into recovery with a device that only had a power button and no volume buttons. May I ask how on earth you managed to get into recovery using only a power button? Reason I ask is that I am now facing this situation. NTech Alexis RX3HD8 tablet, rockchip RK2928 processor, power button and no volume buttons! I need to get into recovery but I cannot turn on USB debugging (and the tablet is pattern locked but the pattern was entered too many times....so I am locked out).
At this point, if I cannot enter recovery mode, the tablet is a permanently soft-bricked which is, for all intents and purposes, the same as a hard-brick.
I think what happened for me was, wanted to install new rom, got into recovery to install it, then it bricked my tab, after that I was at the logo
in my case i fixed everything by getting a rkflasher, to reinstall it, and contacting support for the factory image, which is lucky they new something about it, some companies abandon support, or dont know enoguh about what they sell, lol
as for your situation
these are the things i'd try
1. If it has google play, and is connected wifi even if its locked you can try this page
https://www.google.com/android/devicemanager
and then pick ur device and factory reset it is an option (although ive never tried it)
2. search around on the internet for 1 button recovery methods, I've seen quite a few weird tablets, and some I can think of with 1 button recovery
A. a pin hole thats not the reset button or the mic, was an actual button, and that was used to get into recovery with a safety pin, and doing the normal holding it while powering on method
B.. holding the power button, and instead of letting go when u see a logo, keep holding it, till it shuts off again, then power it on
C. plug it in to pc via usb, and turn it on, while its booting, see if ur pc recognizes it at any point during the startup and try to run some commands, ive had a brand of tabs, that give u adb access during boot, but then remove it after finished booting
4. their website is in spanish, and they dont have firmware/manual links available for your tablet
You could contact support for recovery instructions or reflash instructions,, and hope they speak english or you speak Spanish
Most of the time with 1 button tablets, if theirs no info of similar ones online, unless you can contact support, you might be out of luck
PS, my edit:
also, I saw ur post on the youtube video while looking up stuff about this tablet, if that guy can get you a firmware, you have another option of trying to get to download mode too
my tablet, with rk2928 uses these instructions to get it to show up in the RKBatchTool.
https://www.d2pad.info/docs/OSFirmwareInstallInstruction_D2-721.pdf
maybe they can help you get into download mode on urs
all of this being said, I hope my first suggestion will work, IDK if wifi is disabled during pattern lock, or if u can factory reset any tablet, I just know I always see that option when I'm using it to find my devices ect.
CVAngelo said:
Hey, I realize that it's been a couple years since you posted this question. I never saw any responses. So how did it all end?
Also, there was one critical piece of information you failed to share with the XDA community...you said you worked on getting into recovery with a device that only had a power button and no volume buttons. May I ask how on earth you managed to get into recovery using only a power button? Reason I ask is that I am now facing this situation. NTech Alexis RX3HD8 tablet, rockchip RK2928 processor, power button and no volume buttons! I need to get into recovery but I cannot turn on USB debugging (and the tablet is pattern locked but the pattern was entered too many times....so I am locked out).
At this point, if I cannot enter recovery mode, the tablet is a permanently soft-bricked which is, for all intents and purposes, the same as a hard-brick.
Click to expand...
Click to collapse
Without ADB a soft-brick can become permanent state!
wzzupp548 said:
I think what happened for me was, wanted to install new rom, got into recovery to install it, then it bricked my tab, after that I was at the logo
in my case i fixed everything by getting a rkflasher, to reinstall it, and contacting support for the factory image, which is lucky they new something about it, some companies abandon support, or dont know enoguh about what they sell, lol
as for your situation
these are the things i'd try
1. If it has google play, and is connected wifi even if its locked you can try this page
https://www.google.com/android/devicemanager
and then pick ur device and factory reset it is an option (although ive never tried it)
2. search around on the internet for 1 button recovery methods, I've seen quite a few weird tablets, and some I can think of with 1 button recovery
A. a pin hole thats not the reset button or the mic, was an actual button, and that was used to get into recovery with a safety pin, and doing the normal holding it while powering on method
B.. holding the power button, and instead of letting go when u see a logo, keep holding it, till it shuts off again, then power it on
C. plug it in to pc via usb, and turn it on, while its booting, see if ur pc recognizes it at any point during the startup and try to run some commands, ive had a brand of tabs, that give u adb access during boot, but then remove it after finished booting
4. their website is in spanish, and they dont have firmware/manual links available for your tablet
You could contact support for recovery instructions or reflash instructions,, and hope they speak english or you speak Spanish
Most of the time with 1 button tablets, if theirs no info of similar ones online, unless you can contact support, you might be out of luck
PS, my edit:
also, I saw ur post on the youtube video while looking up stuff about this tablet, if that guy can get you a firmware, you have another option of trying to get to download mode too
my tablet, with rk2928 uses these instructions to get it to show up in the RKBatchTool.
https://www.d2pad.info/docs/OSFirmwareInstallInstruction_D2-721.pdf
maybe they can help you get into download mode on urs
all of this being said, I hope my first suggestion will work, IDK if wifi is disabled during pattern lock, or if u can factory reset any tablet, I just know I always see that option when I'm using it to find my devices ect.
Click to expand...
Click to collapse
Hey thanks for getting back to me. You've been extremely helpful and your response may hopefully be found in future by others who have the same problem.
Here's how it's working out for me with this device:
1. It has Google Play but unfortunately the wifi is turned off and there's no way to connect. But in any event, the little kid whose tablet it is (I'm working on the tablet at the request of her father who is my friend), she doesn't remember the Gmail account name or password.
2. I've searched the entire Internet (LOL) including Spanish and Chinese websites/videos but no luck. I can't find anything about putting this badboy into recovery. The reset button is just for show...it only turns the tablet off in case the power button is unresponsive.
3. I've been to the website of "manufacturer". It's a Portuguese company (I speak the language) but they haven't responded to any contact requests. And they appear to offer the firmware for the devices but download link is dead. So I cannot even get the firmware to flash it. The dude on YouTube has not sent me any link to firmware.
But the bigger problem and the key to the issue is that I cannot get the tablet to be recognized by the computer no matter what I've tried. I've tried all kinds of combinations of power button play but I never get that satisfying BEEP that indicates that there is a connection open. You see, I have the drivers for the tablet but there is no way to install them without the tablet giving the opening (even if it would come back as Unknown Device). So, I'm crap out of luck with this soft-brick.
Again, thanks for your help. After 3 days and probably 15 hours spent trying to reset this thing, I'm going to have to throw in the towel. Important lessons learned:
#1. NEVER PURCHASE AN ANDROID DEVICE THAT HAS NO VOLUME KEYS (or without knowing how to get into recovery). You're only asking for trouble if anything should go wrong. And believe me, this is the THIRD TIME I've seen a device that cannot go into recovery. In one case, I was able to flash new firmware directly on bootup off the external SD card (it was an Android laptop with WM8505 chip). I guess one out of three ain't bad odds...but they are not the kind of odds you want with expensive devices.
#2. ALWAYS TURN ON USB DEBUGGING WITH ANY ANDROID DEVICE YOU OWN AND TELL YOUR FRIENDS TO DO THE SAME. One day, it may end up being the savior of the life of that device because it usually means you can access the device via ADB in case of a soft-brick. LOL.
CVAngelo said:
Hey thanks for getting back to me. You've been extremely helpful and your response may hopefully be found in future by others who have the same problem.
Here's how it's working out for me with this device:
1. It has Google Play but unfortunately the wifi is turned off and there's no way to connect. But in any event, the little kid whose tablet it is (I'm working on the tablet at the request of her father who is my friend), she doesn't remember the Gmail account name or password.
2. I've searched the entire Internet (LOL) including Spanish and Chinese websites/videos but no luck. I can't find anything about putting this badboy into recovery. The reset button is just for show...it only turns the tablet off in case the power button is unresponsive.
3. I've been to the website of "manufacturer". It's a Portuguese company (I speak the language) but they haven't responded to any contact requests. And they appear to offer the firmware for the devices but download link is dead. So I cannot even get the firmware to flash it. The dude on YouTube has not sent me any link to firmware.
But the bigger problem and the key to the issue is that I cannot get the tablet to be recognized by the computer no matter what I've tried. I've tried all kinds of combinations of power button play but I never get that satisfying BEEP that indicates that there is a connection open. You see, I have the drivers for the tablet but there is no way to install them without the tablet giving the opening (even if it would come back as Unknown Device). So, I'm crap out of luck with this soft-brick.
Again, thanks for your help. After 3 days and probably 15 hours spent trying to reset this thing, I'm going to have to throw in the towel. Important lessons learned:
#1. NEVER PURCHASE AN ANDROID DEVICE THAT HAS NO VOLUME KEYS (or without knowing how to get into recovery). You're only asking for trouble if anything should go wrong. And believe me, this is the THIRD TIME I've seen a device that cannot go into recovery. In one case, I was able to flash new firmware directly on bootup off the external SD card (it was an Android laptop with WM8505 chip). I guess one out of three ain't bad odds...but they are not the kind of odds you want with expensive devices.
#2. ALWAYS TURN ON USB DEBUGGING WITH ANY ANDROID DEVICE YOU OWN AND TELL YOUR FRIENDS TO DO THE SAME. One day, it may end up being the savior of the life of that device because it usually means you can access the device via ADB in case of a soft-brick. LOL.
Click to expand...
Click to collapse
At last, did we find at last how to enter in recovery mode if there is only one button (power). I am in the same situation with @CVAngelo .Is it possible not to exist recovery mode at all? My tablet is BENEVE R708G with Rockchip RK2928. I tried every combination with power button and reset button but no luck at all.I have boot loop after trying to change the bootanimation.The weird thing is that the new boot animation ''works'' but after that it goes on boot loop forever.
So, like everyone else, I rooted my phone and decided I dont need all this bloatware and other nonsense system apps.
I was foolish enough not to back up things I were removing, and nothing SEEMED important, but all of the sudden my "Htc dialer": Has stopped working.
My phone will turn on, but I cant turn it off, it just reboots without actually turning the phone off when I hold the power down.
I cant get it into recovery mode ( power vol up) and when it turns on, it goes to the default lock screen the phone comes with, and then I CANT see my home screen at all. The home button doesnt work either.
I cant get to my apps, I have to use my girlfriends DNA to beam whatever app im trying to get to onto my phone.
I can go to settings, but cant factory reset.
I tried killing the battery to get power it off, but then cant get to recovery screen there either.
I'm not sure if anyone has the system apps apk's just laying around so I can attempt to repair my phone, ( my girlfriend wont let me root her phone, but thatll be the next step if no one can help) but any insight as to what I can do would be appreciated.
Try fastboot flashing recovery and then dirty flashing the rom you were on before you started deleting things. This may help you keep your rom setup. If this doesn't work then go to the moonshine thread run the ruu and start from scratch.
xiastro1ix said:
So, like everyone else, I rooted my phone and decided I dont need all this bloatware and other nonsense system apps.
I was foolish enough not to back up things I were removing, and nothing SEEMED important, but all of the sudden my "Htc dialer": Has stopped working.
My phone will turn on, but I cant turn it off, it just reboots without actually turning the phone off when I hold the power down.
I cant get it into recovery mode ( power vol up) and when it turns on, it goes to the default lock screen the phone comes with, and then I CANT see my home screen at all. The home button doesnt work either.
I cant get to my apps, I have to use my girlfriends DNA to beam whatever app im trying to get to onto my phone.
I can go to settings, but cant factory reset.
I tried killing the battery to get power it off, but then cant get to recovery screen there either.
I'm not sure if anyone has the system apps apk's just laying around so I can attempt to repair my phone, ( my girlfriend wont let me root her phone, but thatll be the next step if no one can help) but any insight as to what I can do would be appreciated.
Click to expand...
Click to collapse
Honestly I don't know where to begin with your post. Its all over the place. The phone turns off by holding the power button for 10 seconds and waiting for the capacitive buttons to stop flashing. If your phone turns on its really not possible for this NOT to work. Yes it will reboot this is normal, though once the lights stop blinking you can quickly hold volume down and power to access boot loader and power down fully from there. Recovery is accessed from bootloader too assuming you have one installed. A lot can be done from both bootloader and recovery to solve problems so finding out if you can access them is the first step. I don't understand your statement about the default lock screen showing and you can't see your home screen. Which ROM is it? Which lock screen are you referring to? Why can't you simply unlock the phone? What is stopping you from doing that? Your home button doesn't work and you can't get to your apps...meaning? You can't access the app drawer? I thought you couldn't unlock the device there is conflicting info there. I don't see how you are beaming tasks one at a time through this painful process but I would just avoid that until you've fixed the problem. You can access settings but no factory reset, why? What can you do from settings? And finally you are asking for some apk's "just lying around".....dude your issues seem severe, obviously you are inhibited from using your phone right now but someone giving you some apps won't solve your problem in fact it would probably make it worse. Get into recovery perform a full wipe and flash a different ROM. Also don't mess with deleting apps if your not sure it might screw up your system.
xlxcrossing said:
Honestly I don't know where to begin with your post. Its all over the place. The phone turns off by holding the power button for 10 seconds and waiting for the capacitive buttons to stop flashing. If your phone turns on its really not possible for this NOT to work. Yes it will reboot this is normal, though once the lights stop blinking you can quickly hold volume down and power to access boot loader and power down fully from there. Recovery is accessed from bootloader too assuming you have one installed. A lot can be done from both bootloader and recovery to solve problems so finding out if you can access them is the first step. I don't understand your statement about the default lock screen showing and you can't see your home screen. Which ROM is it? Which lock screen are you referring to? Why can't you simply unlock the phone? What is stopping you from doing that? Your home button doesn't work and you can't get to your apps...meaning? You can't access the app drawer? I thought you couldn't unlock the device there is conflicting info there. I don't see how you are beaming tasks one at a time through this painful process but I would just avoid that until you've fixed the problem. You can access settings but no factory reset, why? What can you do from settings? And finally you are asking for some apk's "just lying around".....dude your issues seem severe, obviously you are inhibited from using your phone right now but someone giving you some apps won't solve your problem in fact it would probably make it worse. Get into recovery perform a full wipe and flash a different ROM. Also don't mess with deleting apps if your not sure it might screw up your system.
Click to expand...
Click to collapse
Alright let me try to be a little more descriptive.
So as for the lock screen, I can unlock the screen, but then I see a black screen, no home page/icons. I cant get into the app drawer, when i try to factory reset, it says "rebooting" for a few seconds, screen turns off, right back on to lock screen, sim card says preparing, and then i'm back to where i was, doesnt actually reset. As for the beaming, I can say, open system app remover or file viewer on my girlfriends phone, then beam it, and my phone will open the corresponding app. This is the only way I can get apps to open, since I can't get to drawer or go to home screen.
When I hold down the power button down, the buttons flash, I get a message saying " continue to hold for 3 seconds" it counts down to 1, and then nothing. I can hold it til my arm falls off, nothing at all happens when it hits 1, I also can't power the phone down. If i try to, the screen goes black, capactive buttons turn white, back to lock screen and phone does " preparing sim" and the network/wifi reconnect as if it was just rebooted.
I have the default rom the phone came with, I believe I have a bootloader, I used a guide from this site to perform my root. The folder I have contains distiller, dnashellroot.apk, boot_secure, busybox, su and superuser.apk
dude your issues seem severe, obviously you are inhibited from using your phone right now
Click to expand...
Click to collapse
The weird part is, other then not being able to turn it off/get into drawer/see home screen, everything else works. If i get a text, i can drag down and select it and it opens. If i open gmail on my GF's phone and beam it, will open Gmail and function 100%. Same goes for any app we both have that I beam.
I just used my rooting method to force bootloader up, which worked, but when i hit recovery, im looking at a picture of a phone laying down with a orange triangle/exclamation point in the center of it.
xiastro1ix said:
The weird part is, other then not being able to turn it off/get into drawer/see home screen, everything else works. If i get a text, i can drag down and select it and it opens. If i open gmail on my GF's phone and beam it, will open Gmail and function 100%. Same goes for any app we both have that I beam.
I just used my rooting method to force bootloader up, which worked, but when i hit recovery, im looking at a picture of a phone laying down with a orange triangle/exclamation point in the center of it.
Click to expand...
Click to collapse
Ok - fact of the matter is that you might want to try getting into recovery via the bootloader (vol down + power from off). If you can access the recovery module from there, you are then able to click advanced (using TWRP) then click sideload. You will then need to use ADB to sideload a new ROM onto the phone, then install via TWRP. Hopefully you might even still have the old .zip for the current ROM that you're using and just really need to get to recovery.
mushroomhead13xx said:
Ok - fact of the matter is that you might want to try getting into recovery via the bootloader (vol down + power from off). If you can access the recovery module from there, you are then able to click advanced (using TWRP) then click sideload. You will then need to use ADB to sideload a new ROM onto the phone, then install via TWRP. Hopefully you might even still have the old .zip for the current ROM that you're using and just really need to get to recovery.
Click to expand...
Click to collapse
I can get into bootloader, i tried recovery, i get a verizon screen bootloader but just resets phone after a few minutes.
At my friends suggestion i just got TWIP installed and now i'm just waiting to see what she suggests next. I figured out thanks to my advance app killer I can get to the play store whenever i need to, and then open any apps i've installed through there. Stupid work around, but hey, it works lol.
xiastro1ix said:
I can get into bootloader, i tried recovery, i get a verizon screen bootloader but just resets phone after a few minutes.
At my friends suggestion i just got TWIP installed and now i'm just waiting to see what she suggests next. I figured out thanks to my advance app killer I can get to the play store whenever i need to, and then open any apps i've installed through there. Stupid workout, but hey, it works, lol.
Click to expand...
Click to collapse
Well if you just got TWRP installed via fastboot or goo manager you should be pretty well set. Download a new ROM, reboot into recovery and install. I would suggest wiping the davik and cache - possibly even the system just to give you a fresh start.
mushroomhead13xx said:
Ok - fact of the matter is that you might want to try getting into recovery via the bootloader (vol down + power from off). If you can access the recovery module from there, you are then able to click advanced (using TWRP) then click sideload. You will then need to use ADB to sideload a new ROM onto the phone, then install via TWRP. Hopefully you might even still have the old .zip for the current ROM that you're using and just really need to get to recovery.
Click to expand...
Click to collapse
mushroomhead13xx said:
Well if you just got TWRP installed via fastboot or goo manager you should be pretty well set. Download a new ROM, reboot into recovery and install. I would suggest wiping the davik and cache - possibly even the system just to give you a fresh start.
Click to expand...
Click to collapse
So far Ive used goo to get twrp installed and now we are working on getting sense 5 working.
Appreciate all the input, might be getting somewhere finally lol.
xiastro1ix said:
So far Ive used goo to get twrp installed and now we are working on getting sense 5 working.
Appreciate all the input, might be getting somewhere finally lol.
Click to expand...
Click to collapse
I highly suggest NOS M7 Sense 5 Build ( http://forum.xda-developers.com/showthread.php?t=2184706 ) - Absolutely stunning at how well it works. I just switched from that to the GPE port from NOS M7 as well. Good work on getting somewhere, I remember the days of IDK WHAT IM DOING OMG WHAT IS THE ADB ...FASTBOOT..... UGH WHATS WITH THIS VERIFICATION ERROR! lol
mushroomhead13xx said:
I highly suggest NOS M7 Sense 5 Build ( http://forum.xda-developers.com/showthread.php?t=2184706 ) - Absolutely stunning at how well it works. I just switched from that to the GPE port from NOS M7 as well. Good work on getting somewhere, I remember the days of IDK WHAT IM DOING OMG WHAT IS THE ADB ...FASTBOOT..... UGH WHATS WITH THIS VERIFICATION ERROR! lol
Click to expand...
Click to collapse
[ROM] Sense 5 M7 Digital Dream ROM v2.1 7/30/13
Im actually all set, i got the phone up and working on this rom, and now im SAFELY using the list below to delete all the apps I dont want.
http://forum.xda-developers.com/showthread.php?p=34704106
This rom kicks ass, i cant believe i stayed with default rom all this time to begin with, turned a bad situation into a much better one
Love XDA so much, this sites a life saver. The first thing that came into mind when I bricked it was, Yep, time to hit XDA.
xiastro1ix said:
[ROM] Sense 5 M7 Digital Dream ROM v2.1 7/30/13
Im actually all set, i got the phone up and working on this rom, and now im SAFELY using the list below to delete all the apps I dont want.
http://forum.xda-developers.com/showthread.php?p=34704106
This rom kicks ass, i cant believe i stayed with default rom all this time to begin with, turned a bad situation into a much better one
Love XDA so much, this sites a life saver. The first thing that came into mind when I bricked it was, Yep, time to hit XDA.
Click to expand...
Click to collapse
Absolutely! I first started out on XDA when I got my first android phone; MyTouch 3g (HTC Magic). I then took my tinkering to full fledged modding where I was charging to overclock, root and unlock phones. It used to be fairly profitable, now there's one click steps for everything. Glad you were able to figure it out instead of having to take it to someone! Good work!
Pls help me root my zte obsidian running android 5.1 Model NO. Z820
I need help too
I also have ZTE obsidian tmobile and really want to root it i cant do much because it only comes with 4gb of space and i cant move apps to the SD card till i root Please help find a root
yeah same issue here all say that it cant after like 10-15 mins its just like nope sry
have you used this
http://forum.xda-developers.com/cro...oolbox-android-one-toolkit-one-click-t3030165
Yes, I tried. Its not working.
Is there any other way. I am desperate. It doesnt allow to move the Apps to SD card. There is no way. Locked in 4GB
I have a z820 in need of root as well. I've tried everything, including the link up there, and so far.....nope. Nothing. No apps to SD for me either.
Zte can't root for ****!!!!
I'm so mad because I really tried everything even a computer won't let me tried everything there to like why would the make a zte that can't even move your games or pictures or music to your SD card knowing danm well everybody gone need like we only got 4g that's nothing so what are we so posted to do delete stuff that we like.to trade for the other that we really don't need **** I'm pissed right now I know y'all are to but if anybody finds something please send me the info or con me by [email protected] thank you:good:
Needs update
This Phone really needs an update, it reboots and sucks, we can't even get into fastboot or anything to try to unlock the bootloader someone needs to make this possible because who in the hell uses only 4gb of storage, apps are so big and you can only download like 3 apps then you have to get rid of something if you want another app and its dumb so please someone..HELP US :crying:
Throwing my post up here so I can follow. Need root bad on this thing. I am using lite versions of every app. Lol
Same problem w/ ZTE obsidian..tCan't move to SD card. Anybody figure somethcing out yet?
I've gotten Kingroot to attempt to root it once and the results varied. Usually got 16% but the highest was almost 30% but I can't even get kingroot to even root it anymore.
The phone is not going into fastboot at all. I think the bootloader is locked. The phone will never be rooted.
I might of found a way, but it's untested so, proceed at your own risk, I am not responsible if your phone becomes bricked.
Enable developer mode and tick "OEM Unlocking" in the developer menu
Download SuperSU update zip from Chainfire's site and put it on your sdcard (internal won't work)
Power off your phone and hold power and volume up
Select recovery, wait for the android with the lid open to show up
Hold power and volume up for a couple seconds and let go
A menu should pop up, if not try again until it does
Select "update from sdcard"
Select the SuperSU zip
Let it flash the zip (shouldn't take long)
Choose reboot
See if SuperSU is installed and test that it works
Again, this is untested and would need a couple of people testing it to make sure it works flawlessly, so if this worked, please post that it did.
Nope. Thank you though.
picsles said:
Nope. Thank you though.
Click to expand...
Click to collapse
Any type of error happen or did it not allow it to flash at all?
I can't even get to recovery. Gives me the choice then goes to dead android guy.
Sent from my LGL21G using Tapatalk
Musicmanmike said:
I can't even get to recovery. Gives me the choice then goes to dead android guy.
Sent from my LGL21G using Tapatalk
Click to expand...
Click to collapse
You have to hold down power and vol up for like 2 seconds when you get to the dead android, then you'll get the recovery menu.
When I try to install the update package, I get 'opening update package' followed after less than a second by 'installation aborted'.
I powered down from the Developer Options screen with OEM unlock turned on when trying to update - it appears to turn off during boot as it is off again on restart.
Any suggestions? I looked at the logs that are visible from the recovery screen but they did not seem to have anything useful. Are there logs I can retrieve via ADB to see what the issue is?
My phone has build B18.
Kurrelgyre said:
When I try to install the update package, I get 'opening update package' followed after less than a second by 'installation aborted'.
I powered down from the Developer Options screen with OEM unlock turned on when trying to update - it appears to turn off during boot as it is off again on restart.
Any suggestions? I looked at the logs that are visible from the recovery screen but they did not seem to have anything useful. Are there logs I can retrieve via ADB to see what the issue is?
My phone has build B18.
Click to expand...
Click to collapse
OEM Unlocking is always on for me even after restarts but I haven't tried to flash SuperSU yet. You might wanna get a logcat while doing it and post it here to see if anyone knows what the problem is. I have an older build of the phone (B03) but I dunno if it matters or not.
EDIT: Also every new Kingroot build allows you to attempt to root it for like 2 days and then it just can't for some reason but the thing with 18% still happens.
LUModder said:
You might wanna get a logcat while doing it and post it here to see if anyone knows what the problem is. I have an older build of the phone (B03) but I dunno if it matters or not.
Click to expand...
Click to collapse
The logcat I am familiar with is in ADB. The only way I can find to access the phone from recovery with ADB is to select the flash from ADB option, which puts the phone in sideload mode where you can't pull data off. I was unsure if trying to load the ZIP that way would brick the phone so I haven't tried it.
I also tried using Fastboot and it doesn't recognize the phone at any time.
Is there another way to capture what is happening with the update?
I tried selecting restart in bootloader from the recovery menu with the phone connected to the PC. It stayed at the ZTE splash screen for over 10 minutes but neither fastboot nor ADB was able to communicate with it. I tried various key combinations without effect and finally ended up pulling the battery. Maybe it just froze up during boot for some reason.
I have tried every one-touch root I can find, none of them work. All the manual guides start with unlocking the bootloader - which I can't find any info on for this model. Based on the partition info, it's definitely locked: it has 27 (!) partitions including names like seccfg and oemkeystore. Is this normal for a lollipop device?