I finally managed to build a OTG cable with external power supply. I tought that the last build of CM 10.2 had the kernel and drivers prepared for OTG but no. Is there ANY other way to install drivers for OTG or another kernel?
If I'm not mistaken our devices never had OTG support to begin with.
Sent from my LG Optimus 9 running RaptureROM using Tapatalk
leolawliet said:
If I'm not mistaken our devices never had OTG support to begin with.
Sent from my LG Optimus 9 running RaptureROM using Tapatalk
Click to expand...
Click to collapse
Yeah I know that. But I tought that if we could manage to build a OTG cable with external power supply and use Cyanogenmod ( wich is supposed to have a kernel prepared for OTG ) we could finnaly "enable" the OTG feature on our L9.
*Like I said I don't know almost nothing about ROM's, kernels and other stuff.All the information I have is from what I've read on the internet.I put pieces togheter and I've tought that this "sistem" should probably work. :fingers-crossed:
You might try some kernels you find, maybe one of them lets you use OTG.
If you find it, you can tell us
Enviado desde mi LG-P760 mediante Tapatalk
---------- Post added at 08:37 PM ---------- Previous post was at 07:58 PM ----------
You can try this kernel, although the developer says OTG is not tested: http://forum.xda-developers.com/showthread.php?t=2233113
Enviado desde mi LG-P760 mediante Tapatalk
---------- Post added at 08:41 PM ---------- Previous post was at 08:37 PM ----------
And this one http://forum.xda-developers.com/showthread.php?t=2249312 :thumbup:
Enviado desde mi LG-P760 mediante Tapatalk
I don't see why it shouldn't be tested
This device would be better with OTG.
Is there any way to support "USB OTG" for not "USB OTG" phones?
AboutVikas said:
Is there any way to support "USB OTG" for not "USB OTG" phones?
Click to expand...
Click to collapse
Yes, as alexbarbu says, although our L9s doesn´t support OTG officially, if you flash a kernel with OTG support (such as the ones I have posted before) and you have a OTG cable with a third extension to a power supply, it is supposed that USB OTG should work on our devices. :good:
Pablito_097 said:
Yes, as alexbarbu says, although our L9s doesn´t support OTG officially, if you flash a kernel with OTG support (such as the ones I have posted before) and you have a OTG cable with a third extension to a power supply, it is supposed that USB OTG should work on our devices. :good:
Click to expand...
Click to collapse
thanks
Maybe StickMount does the job for self-powered devices. Real on-the-go won't work. My cardreader's power led won't even light up, so no saving jpegs from my dslr.
Related
Hello,
I have installed the AmatROM for Galaxy Tab 3 and I am still not getting USB charging. I would post in the ROM forum, but I do not have permissions yet.
kd7eir said:
Hello,
I have installed the AmatROM for Galaxy Tab 3 and I am still not getting USB charging. I would post in the ROM forum, but I do not have permissions yet.
Click to expand...
Click to collapse
Hey,
You could simply send me a PM about this ! :laugh:
Response to your notice:
The USB Charging is NOT normally implemented by the ROM itself
It's implemented by the Kernel and BinDroid Kernel have this feature.
Properly check your USB Cable and please, DON'T USE THE DEVICE WHILE IT'S CHARGING through the USB.
You can use Galaxy Current Charging (search in PlayStore) to check if it's charging or not.
Sent from my room mate's computer
Nonta72 said:
Hey,
You could simply send me a PM about this ! :laugh:
Response to your notice:
The USB Charging is NOT normally implemented by the ROM itself
It's implemented by the Kernel and BinDroid Kernel have this feature.
Properly check your USB Cable and please, DON'T USE THE DEVICE WHILE IT'S CHARGING through the USB.
You can use Galaxy Current Charging (search in PlayStore) to check if it's charging or not.
Sent from my room mate's computer
Click to expand...
Click to collapse
Thank you for the information. I reinstalled and it's charging via USB now.
kd7eir said:
Thank you for the information. I reinstalled and it's charging via USB now.
Click to expand...
Click to collapse
Good to hear
Hope u are enjoying the ROM
Sent from my room mate's computer
hi, i have a question, our smartphone support otg? i read a thread but i dont see the link, can u help me?
OTG Support - Moto E
OTG support was available for version 4.4.2 and after upgrading to 4.4.4 it stopped working. Now we get only 4.4.4 version pre-installed. Is there a way to downgrade to version 4.4.2?
naveenultimategamer said:
absolutely no and never...
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
Dinesh Merrill said:
OTG support was available for version 4.4.2 and after upgrading to 4.4.4 it stopped working. Now we get only 4.4.4 version pre-installed. Is there a way to downgrade to version 4.4.2?
Click to expand...
Click to collapse
Moto E does not support OTG, it never did, it's both hardware and software limitation.
Is there a way to downgrade to version 4.4.2?
Dinesh Merrill said:
OTG support was available for version 4.4.2 and after upgrading to 4.4.4 it stopped working. Now we get only 4.4.4 version pre-installed. Is there a way to downgrade to version 4.4.2?
Click to expand...
Click to collapse
Is there a way to downgrade to version 4.4.2?
Yes flash 4.4.2 stock firmware without flashing gpt.bin file.
Yes, you can unlock Qualcomm settings.
Step 1 - install a custom android launcher, such as nova or apex.
Step 2 - long press on the home screen and popup appears, and click on add shortcuts. Shortcuts>activities>com.Qualcomm.settings>Qualcomm settings.
Whenever you connect your otg go to Qualcomm settings and click on enable otg or otg mode peripheral, and also switch on mass storage mode.
KabirUnreal said:
Yes, you can unlock Qualcomm settings.
Step 1 - install a custom android launcher, such as nova or apex.
Step 2 - long press on the home screen and popup appears, and click on add shortcuts. Shortcuts>activities>com.Qualcomm.settings>Qualcomm settings.
Whenever you connect your otg go to Qualcomm settings and click on enable otg or otg mode peripheral, and also switch on mass storage mode.
Click to expand...
Click to collapse
so is it working for u to have otg on moto e on lollipop?
Doesn't work in lollipop, but it did in KitKat.
KabirUnreal said:
Doesn't work in lollipop, but it did in KitKat.
Click to expand...
Click to collapse
[email protected]!!!!!
otg was working on kitkat?!!on moto e?
have you tested ?and on lollipop try fat32
Yes, you need to follow the instructions above and need ES File Explorer from, the play store.
Guys plz whoes on stock rom pls try if u can use otg in motoe using above method... It will help devs to implement this feature into custom roms.......
---------- Post added 25-02-2015 at 12:22 AM ---------- Previous post was 24-02-2015 at 11:25 PM ----------
Well i flashed stock rom just to cross-check if above methid will work,
Well bad news is that i tried all method in stock 4.4.4 rom and didn't nt conected my pen drive.... Not tested on soak test rom and stock 4.4.2 so anyone have 4.4.2 rom then check if it works...........
Adarsh1998 said:
Guys plz whoes on stock rom pls try if u can use otg in motoe using above method... It will help devs to implement this feature into custom roms.......
---------- Post added 25-02-2015 at 12:22 AM ---------- Previous post was 24-02-2015 at 11:25 PM ----------
Well i flashed stock rom just to cross-check if above methid will work,
Well bad news is that i tried all method in stock 4.4.4 rom and didn't nt conected my pen drive.... Not tested on soak test rom and stock 4.4.2 so anyone have 4.4.2 rom then check if it works...........
Click to expand...
Click to collapse
CONFIRMED!
OTG works on stock 4.4.2 using external powered usb hub, there is no mouse/keyboard detection but sucefully load my usb flash drive using the "Nexus Media Importer" app from playstore.
This means, Moto E has USB Host Support from hardware! The only limitation is in newest softwares/kernels!
SrDesalmado said:
CONFIRMED!
OTG works on stock 4.4.2 using external powered usb hub, there is no mouse/keyboard detection but sucefully load my usb flash drive using the "Nexus Media Importer" app from playstore.
This means, Moto E has USB Host Support from hardware! The only limitation is in newest softwares/kernels!
Click to expand...
Click to collapse
Seriously? I still doubt about it. Sorry but could you give me ss/ photo please?
SrDesalmado said:
CONFIRMED!
OTG works on stock 4.4.2 using external powered usb hub, there is no mouse/keyboard detection but sucefully load my usb flash drive using the "Nexus Media Importer" app from playstore.
This means, Moto E has USB Host Support from hardware! The only limitation is in newest softwares/kernels!
Click to expand...
Click to collapse
Not sure with external power supply normally any android device will Mont. .. We need to mount without ext powered usb hub... Like in moto g and x.....
Correct me if i Wrong
wLoader said:
Seriously? I still doubt about it. Sorry but could you give me ss/ photo please?
Click to expand...
Click to collapse
Adarsh1998 said:
Not sure with external power supply normally any android device will Mont. .. We need to mount without ext powered usb hub... Like in moto g and x.....
Correct me if i Wrong
Click to expand...
Click to collapse
Some Android device does not support any type of usb connections, like most of LG phones, these devices haven't otg drivers, XML permissions, mount partitions and kernell support, but in hardware i think the only limitation is the 5V power supply, and yes, you're right, mounting usb sticks through ext powered usb hub isn't otg support like moto g and x, is only a simple USB Host support
SrDesalmado said:
Some Android device does not support any type of usb connections, like most of LG phones, these devices haven't otg drivers, XML permissions, mount partitions and kernell support, but in hardware i think the only limitation is the 5V power supply, and yes, you're right, mounting usb sticks through ext powered usb hub isn't otg support like moto g and x, is only a simple USB Host support
Click to expand...
Click to collapse
is that moto e?in ss
-Adarsh- said:
is that moto e?in ss
Click to expand...
Click to collapse
Yeap
SrDesalmado said:
Yeap
Click to expand...
Click to collapse
Can u explain how you did it?and is that thing working on lollipop?
-Adarsh- said:
Can u explain how you did it?and is that thing working on lollipop?
Click to expand...
Click to collapse
@-Adarsh- Normally any android phones can mount usb with external powerd usb hub....
Srch in youtube like 'usb hub android' watch first vedio....
-Adarsh- said:
Can u explain how you did it?and is that thing working on lollipop?
Click to expand...
Click to collapse
I used a external powered usb hub and a simple otg cable, this method is working only on 4.4.2 stock firmware, don't ask me why, in lollipop it don't seems to work, but probally using a custom kernel is possible put usb host to work, let's wait for a developer to do that in future
Is otg working on moto e after lollipop update?
-Adarsh- said:
Is otg working on moto e after lollipop update?
Click to expand...
Click to collapse
It's not software specific. .. Its hardware specific...
Adarsh1998 said:
It's not software specific. .. Its hardware specific...
Click to expand...
Click to collapse
I don't belive it's not possible... Moto E has USB Host drivers, permissions, and mount partitions (I see it on my device) but, OTG don't works, with and without a powered USB HUB... So, i belive it's only a kernel limitation... or something like this... It's only my opinion, but maybe is possible make OTG works, just wondering
SrDesalmado said:
I don't belive it's not possible... Moto E has USB Host drivers, permissions, and mount partitions (I see it on my device) but, OTG don't works, with and without a powered USB HUB... So, i belive it's only a kernel limitation... or something like this... It's only my opinion, but maybe is possible make OTG works, just wondering
Click to expand...
Click to collapse
Ya its a kernel restriction in our case...maybe someday someone will build a kernel..btw have u tested otg with lollipop update...and if u are soak test user then tell motorola to add otg if possi in your feedback
Is there anyway to make otg work in cm 12.1
Which is your phone model?
---------- Post added at 07:15 AM ---------- Previous post was at 07:09 AM ----------
jobitjoseph1 said:
Is there anyway to make otg work in cm 12.1
Click to expand...
Click to collapse
Which is your phone model?
700Abhi007 said:
Which is your phone model?
---------- Post added at 07:15 AM ---------- Previous post was at 07:09 AM ----------
Which is your phone model?
Click to expand...
Click to collapse
It's lte model xt1521
Hi,
I have the lte version xt1524 (surnia) and using current cm12.1 nightly. In settings > storage menu I also do not find any sign of usb otg, although stock rom supports it.
Can usb otg be implemented in surnia cm12.1?
Markus.Eisen said:
Hi,
I have the lte version xt1524 (surnia) and using current cm12.1 nightly. In settings > storage menu I also do not find any sign of usb otg, although stock rom supports it.
Can usb otg be implemented in surnia cm12.1?
Click to expand...
Click to collapse
I have the moto e2 4G lte (XT1527) with cm12.1 and the otg cable works excellent
dannroda said:
I have the moto e2 4G lte (XT1527) with cm12.1 and the otg cable works excellent
Click to expand...
Click to collapse
not in xt1521. also unable to send sms
dannroda said:
I have the moto e2 4G lte (XT1527) with cm12.1 and the otg cable works excellent
Click to expand...
Click to collapse
When I connect usb storage to the phone it is powered by it but neither cm12.1 nor any file manager regognizes it.
Does any XT1524 user have working usb otg with cm12.1 nightly?
Markus.Eisen said:
When I connect usb storage to the phone it is powered by it but neither cm12.1 nor any file manager regognizes it.
Does any XT1524 user have working usb otg with cm12.1 nightly?
Click to expand...
Click to collapse
Did you tried ES FILE EXPLORER (it has an internal option to mount usb stick, but very buggy) or chainfire's stickmount??
Your phone lacks otg support
---------- Post added at 09:48 AM ---------- Previous post was at 09:41 AM ----------
Just by flashing a custom rom or using any file explorer will not give you otg support.Your device should have otg hardware support
700Abhi007 said:
Your phone lacks otg support
---------- Post added at 09:48 AM ---------- Previous post was at 09:41 AM ----------
Just by flashing a custom rom or using any file explorer will not give you otg support.Your device should have otg hardware support
Click to expand...
Click to collapse
All the moto e lte models support otg. I'm currently using it with stock rom.
dannroda said:
Did you tried ES FILE EXPLORER (it has an internal option to mount usb stick, but very buggy) or chainfire's stickmount??
Click to expand...
Click to collapse
StickMount or ES File Explorer do not work.
StickMount says something like "mount command busy". ES File Explorer has a folder "usbdisk" in "storage" but it is empty when otg connected.
700Abhi007 said:
Your phone lacks otg support
---------- Post added at 09:48 AM ---------- Previous post was at 09:41 AM ----------
Just by flashing a custom rom or using any file explorer will not give you otg support.Your device should have otg hardware support
Click to expand...
Click to collapse
When I use stock rom USB otg works correctly.
Any other ideas?
Use root explorer and try any 2.0 pendrive with some files in it
Good luck
does surnia really supports otg or not ?
satyajit161 said:
does surnia really supports otg or not ?
Click to expand...
Click to collapse
Off course . it supports otg in stock rom
jobitjoseph1 said:
Off course . it supports otg in stock rom
Click to expand...
Click to collapse
i am using cm 12.1-20151120 official nightly with squid kernel . is there any way to use usb otg in it ???
http://forum.xda-developers.com/mot...d-standard-t3051835/post63002596#post63002596
Usb otg definitely works on cm12.1
jobitjoseph1 said:
Is there anyway to make otg work in cm 12.1
Click to expand...
Click to collapse
jobitjoseph1 said:
Is there anyway to make otg work in cm 12.1
Click to expand...
Click to collapse
At first i had the same issue the usb folder wont show up even though i used es file explorer bt then in the app after opening the side menu there's this tab called as : local in this tab you'll find usbstorage. Click on it and done!
But make sure the pendrive led is glowing! Cz most of the usb otgs have loose connection problems!
ASKdroid said:
At first i had the same issue the usb folder wont show up even though i used es file explorer bt then in the app after opening the side menu there's this tab called as : local in this tab you'll find usbstorage. Click on it and done!
But make sure the pendrive led is glowing! Cz most of the usb otgs have loose connection problems!
Click to expand...
Click to collapse
Thanks bro it really helped. It works. Do you know any solution for the SMS issue (unable to send SMS in cm 12.1)
jobitjoseph1 said:
Thanks bro it really helped. It works. Do you know any solution for the SMS issue (unable to send SMS in cm 12.1)
Click to expand...
Click to collapse
Well i use pac-rom...this has the same ui as cm12.1 except the fact that it is based on cm12.1 also it has less bugs than cm12.1 n sms works fine without any errors in pac-rom! Also u could try using other messaging apps like textra or Google messenger!
Or just visit this link! You might find some potential solutions here! http://forums.androidcentral.com/samsung-galaxy-note-4/578595-can-only-send-mms-sms-fails.html
Yes, I have the same problem - on the xt1524 OTG works fine on stock ROM, but doesnt work on the current nightly for CM12.1.
Hi guys! I have a problem with my wired xbox one controller connected via usb otg to the tablet. It simply doesn't work. Energy arrives cause the led works, but it doesn't connect. With my Mi A1 it works like a charm, plug & play and it's done. I think it could be a kernel problem... How can I fix it?
I'm on the latest miui.eu... maybe with some gsi rom?
Solved: Need custom rom to work. Definitely software problem, maybe a missing file in MIUI
Alecotro said:
Hi guys! I have a problem with my wired xbox one controller connected via usb otg to the tablet. It simply doesn't work. Energy arrives cause the led works, but it doesn't connect. With my Mi A1 it works like a charm, plug & play and it's done. I think it could be a kernel problem... How can I fix it?
I'm on the latest miui.eu... maybe with some gsi rom?
Click to expand...
Click to collapse
In magisk exist a module to support xbox one controller
But i tried with a gsi image and not works...
Led of usb otg not on...
Enviado desde mi MI 6 mediante Tapatalk
---------- Post added at 11:11 PM ---------- Previous post was at 11:02 PM ----------
Try that: https://en.miui.com/thread-3632888-1-1.html
Enviado desde mi MI 6 mediante Tapatalk
Kaneki said:
In magisk exist a module to support xbox one controller
But i tried with a gsi image and not works...
Led of usb otg not on...
Enviado desde mi MI 6 mediante Tapatalk
---------- Post added at 11:11 PM ---------- Previous post was at 11:02 PM ----------
Try that: https://en.miui.com/thread-3632888-1-1.html
Enviado desde mi MI 6 mediante Tapatalk
Click to expand...
Click to collapse
Good to know, we "only" need to wait for kernel sources and than a real custom rom... Hope it doesn't take that long
Alecotro said:
Good to know, we "only" need to wait for kernel sources and than a real custom rom... Hope it doesn't take that long
Click to expand...
Click to collapse
This year maybe xD
Enviado desde mi MI 6 mediante Tapatalk
Kaneki said:
This year maybe xD
Enviado desde mi MI 6 mediante Tapatalk
Click to expand...
Click to collapse
Kernel released today! Maybe you're right!
Alecotro said:
Kernel released today! Maybe you're right!
Click to expand...
Click to collapse
Amazing news!!
Enviado desde mi MI 6 mediante Tapatalk
As expected works flawlessly with LineageOs 16.0. I think it should work with any custom rom AOSP based
Are you sure it doesn't work? My xbox one controller connects easily with my MIUI 10 Mi Pad 4.