I am proud to present
VIBE-ROM V7 !!
ROOT GAPPS TWEAKED AND NOOB-FRIENDLY
Instructions:
1- unzip all the files in your "/sdcard/sdfuse/" folder
2- Boot in droidboot mode (power+volUp)
3- Choose sdupdate option
4- Wait till finish
6- Reboot
NOTE: DO NOT ALLOW SUPERUSER TO AUTOUPDATE
Features
-NEW BOOTANIMATION
-MP4 recording (thanks to @xxx-man-by )
-NO NEED TO WIPE sdDATA (obviously apps will be wiped, USE TITANIUM BACKUP)
-All in one zip (root, gapps, tweaks)
-inverted play store (battery and eyes friendly , and solved dpi incompatibilities)
-Root Explorer
-No chinesse annoying bloatware
-Default language english
-Noob friendly
NO NEED TO GRANT PERMISSIONS OR ANYTHING, ALL IS MADE TO WORK JUST FLASHING
IT IS TESTED BY ME AND IT WORKS GREAT, SO IF IT DOESNT WORK FOR YOU, DO ALL THE STEPS AGAIN CAREFULLY
I AM NOT RESPONSIBLE IF YOU DO SOMETHING WRONG AND "BRICK" YOUR DEVICE. However it is almost imposible to brick an android phone...
DOWNLOAD: http://bit.ly/KZ5Pd6
SIGNATURE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RESERVED
597MB hence you need to flash v6 1st then upgrade to this v7 right !
mydroidfren said:
597MB hence you need to flash v6 1st then upgrade to this v7 right !
Click to expand...
Click to collapse
No, you don't need
trungduc5151 said:
yes, you should flash inb file from Vibe 6 first
Click to expand...
Click to collapse
You cant just flash the V7 straight from V4?
Hi QuBeX
1. Thanks for your great rom but can you upload SECUREit and Lenovo Power apk?
I see that you have deleted
2. Can we have battery option in setting in next VIBE?
Thanks
pjsplayez said:
You cant just flash the V7 straight from V4?
Click to expand...
Click to collapse
I have fixed my reply above, sorry for any confusion, you can flash this rom from any rom
---------- Post added at 11:46 AM ---------- Previous post was at 10:57 AM ----------
QuBeX said:
I am proud to present
VIBE-ROM V7 !!
ROOT GAPPS TWEAKED AND NOOB-FRIENDLY
Instructions:
1- unzip all the files in your "/sdcard/sdfuse/" folder
2- Boot in droidboot mode (power+volUp)
3- Choose sdupdate option
4- Wait till finish
6- Reboot
NOTE: DO NOT ALLOW SUPERUSER TO AUTOUPDATE
Features
-NEW BOOTANIMATION
-MP4 recording (thanks to @xxx-man-by )
-NO NEED TO WIPE sdDATA (obviously apps will be wiped, USE TITANIUM BACKUP)
-All in one zip (root, gapps, tweaks)
-inverted play store (battery and eyes friendly , and solved dpi incompatibilities)
-Root Explorer
-No chinesse annoying bloatware
-Default language english
-Noob friendly
NO NEED TO GRANT PERMISSIONS OR ANYTHING, ALL IS MADE TO WORK JUST FLASHING
IT IS TESTED BY ME AND IT WORKS GREAT, SO IF IT DOESNT WORK FOR YOU, DO ALL THE STEPS AGAIN CAREFULLY
I AM NOT RESPONSIBLE IF YOU DO SOMETHING WRONG AND "BRICK" YOUR DEVICE. However it is almost imposible to brick an android phone...
DOWNLOAD: http://bit.ly/KZ5Pd6
SIGNATURE
Click to expand...
Click to collapse
Hi Qubex Thanks for launching your V7
But, in V7 you have deleting SIM TOOL KIT and EMAIL..
can you please help me for bring it that applications system come back again?
Because that 2 Apllication sytem is very important for my Handheld:crying:
what are you have still files the backup data from that application
Thanks Before
mydroidfren said:
597MB hence you need to flash v6 1st then upgrade to this v7 right !
Click to expand...
Click to collapse
It is Because the compression level is higher, you can flash in any ROM
so i can flash to v7 from vibe v4?
JoppyDP said:
so i can flash to v7 from vibe v4?
Click to expand...
Click to collapse
yep
Downloaded this rom, very promising! thanks. Just a couple of question...
- Other languages are available?
- The order of firstname/lasname changeable (cant fint how to change)
Thanks!
2 small mods for VibeROM v7 by QuBeX:
framework-res.apk:
Removed Emergency call button from stock Lock screen (it's visible if you set security lock type to pattern or PIN). I'm already tired of unintentional emergency call attempts.
Settings.apk:
Added battery usage stats in System settings (Device section).
You have to download file(s) and manually replace system apk(s) with them. Yes, you ought to know how to do this (or google it). These mods are completely independent, you may apply any one of them.
framework-res.apk is for \system\framework\, permissions are rw-r--r--. Device will reboot on change.
Settings.apk is for \system\app\, permissions are rwxrwxrwx. I had to deodex the file, so it's slightly bigger than original one.
BTW, anyone using this “battery mod” please report if battery stats seem reasonable. Cause I’ve seen a number of times when stats were a mess and had obvious errors (like not listing 3D game I’ve played for 2 hours). Maybe that’s the reason why Lenovo hided battery usage from settings (it’s just hidden in fact, not removed). Maybe we should check for alternative power usage stats instead.
QuBeX, you mentioned inverted play store in features of your v7, but it’s just plain white for me from start. Is it really inverted in your K900?
Hi guys (& Qubex)
Did any of you noticed that 2 things:
- Wifi connecting to the open networks (supermarkets, and so on...) is sooo slow, and often the phone doesn't even connect to them...
- The GPS doesn't work correctly also... It takes him about 2-3 minutes for finding ONE satellite... And the other two isn't anywhere...:-/
Anybody?
Had 2 reboots today for no visible reason (just charging phone).
Will test it tomorrow, but now I’m going to roll back to Vibe 4.
silvsilv said:
Had 2 reboots today for no visible reason (just charging phone).
Will test it tomorrow, but now I’m going to roll back to Vibe 4.
Click to expand...
Click to collapse
How can I go back? Simply with the sdfuse method?
Btw, why does not Qubex answer to our questions? ...
Tegzike said:
How can I go back? Simply with the sdfuse method?
Click to expand...
Click to collapse
Yes, sure.
But mine is stable until now.
Btw, why does not Qubex answer to our questions? ...
Click to expand...
Click to collapse
Well, maybe because it’s not his job?
Or maybe because people here don’t like his new boot animation?.. ;o)
Tegzike said:
How can I go back? Simply with the sdfuse method?
Btw, why does not Qubex answer to our questions? ...
Click to expand...
Click to collapse
silvsilv said:
Yes, sure.
But mine is stable until now.
Well, maybe because it’s not his job?
Or maybe because people here don’t like his new boot animation?.. ;o)
Click to expand...
Click to collapse
Hi guys, I'm so sorry, but I have a lot of exams and I can't spent too much time with this also I'm very sad people don't like my boot animation :crying: hahahhahaha joking
Well, now talking about our k900 and vibe7. For me it is really stable, great battery life, no problem at all. maybe you didn't do a proper wipe or something also problems regarding hardware are Lenovo problems and only they can fix them...
Now, The inverted Play store. Download the last build, it is solved
Also if you don't want to lose data coming from vibe4 or vibe6 I have read that only flashing system.IMG.Gz works, but I haven't tested it so it is up to you
Hope your questions are solved and again sorry
I have some interesting situation.
I was on vibe4, then on vibe7 and yesterday I did back on vibe4, with same zip file I used for vibe4 first time with sdfuse.
I got mixed app from both roms???
I dont see anymore Ultimate power app, etc, that I have on first flash, but I see chinese app, also like first flash.
Now I have wide touch from vibe7, etc. what I didn't have in first flash of vibe4.
I did only rewrite sdfuse folder every time when I flash rom.
The download link doesnt seem to be working. It's loading non stop but not loading the page itself
VibeROM 4 made my phone hot. So I istalled this. But there is a superuser problem. Every time a notification will appear asking me to install Superuser, and then it will fail. Any idea? However, TitaniumBackupPRO runs OK, although it always asks for USB debugging to be activated even though i had done it already.
Related
I have finally put together a ROM for us Locked Bootloader users. I used Hogwarts COLA ROM as a base for this ROM. This is my first attempt with creating ROMS. So please bear with me if you find bugs, and let me know, so i can fix them. Thanks guys, and enjoy!
**WARNING - This has only been tested on LOCKED BOOTLOADER R800X!! Install at YOUR own risk!**
Features v1
- Replaced stock Launcher with ADW
- Replaced stock Camera with Camera Mod (use "R" button to snap pics)
- Added Notification Toggles
- Removed Carrier Name from Notification Dropdown
- Themed w/ XperainceIT "Green Acid" Theme.
- Replaced Boot Animation
Updated Features v1.1
- Updated Build.prop w/ a few tweaks (see code below for a list of tweaks)
- Added Green dialer Theme
- Changed Font to stock.
Code:
Raised JPG quality to 100%
Decreased dialing out delay
Helped scrolling responsiveness
Increased overall touch responsiveness
Raised photo and video recording quality
Signal (3G) tweaks
Net speed tweaks
Disabled blackscreen issue after a call
Fixed some application issues
Known bugs:
- Factory Reset/Data Wipe, breaks the ROM. (Working on fixing this)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTES- ROM Currently does NOT come with Titanium Back up or Screenshot, they were on my version when i took the screen shot.
Download Link:
IT ROM.v1.1**NEW**
IT ROM v1
Installation:
- Download, then extract IT ROM.
- Place ROM into /sdcard/clockwork/backup
- Boot into Recovery
- Wipe Cache / Dalvik Cache
- Restore
Future Updates:
Version 1.2- (ETA: Undetermined)
- Add Mobile Bravia Engine
- Add script for SetInstallLocation 2 (not sure if this will work as a pre-installed feature as it requires a line command prompt, then a reboot)
- Add a Theme Chooser app for the XperianceIT Themes (this one may take me a bit, not very good at app creation)
Some themes from my Theme Thread:
(Original Theme Thread)
"Purple Haze"
"Blood Lust" w/Toggles
"Pink Passion" w/Notification Toggles
"White Elegance w/Toggles"
"Blue Void" w/Toggles
"Blue Void" w/o Toggles
If any of you have any suggestions on new tweaks, mods, or would like to see certain apps included into this ROM as system apps, please let me know.
Special Thanks:
- Hogwarts, for taking the time to teach and mentor me on building a ROM. His COLA ROM can be found HERE
Nice man! My only suggestion would be to offer a CWR ZIP to change the font to something more readable.
Sent from my R800i using Tapatalk
Clienterror said:
Nice man! My only suggestion would be to offer a CWR ZIP to change the font to something more readable.
Sent from my R800i using Tapatalk
Click to expand...
Click to collapse
Ahh man, thanks, i didnt even think about that!... lol I could add Font Installer as a system app.
Different color themes would be great.
Sent from my R800x using XDA App
iceman99393 said:
Different color themes would be great.
Sent from my R800x using XDA App
Click to expand...
Click to collapse
Good idea.... Original Post edited! Now have links to my themes from my theme thread.
Coo Tool
Downloading Now. Will update after testing.
(OFF TOPIC: I need someone to pm me and let me know the process in building and posting roms.)
Thanks. I appreciate all feedback.
XperianceIT
sent from my Xplay R800X, using XDA App!
Update.
Ok, Got the "Activity Market (in app market)not responding.
Force close or wait" a few times when first
starting it, but then seemed to striaghten up after I just waited a couple mins.
Other than that, so far all is working. Talk,Wifi,Bluetooth,GPS,, All Good.
Nice Job my man.
OK awesome. I think it has to sync all your Google info first. Other than that how you like it?
XperianceIT
sent from my Xplay R800X, using XDA App!
What does this do that cola doesnt?
Milenko2121 said:
What does this do that cola doesnt?
Click to expand...
Click to collapse
Well with a locked boot loader any "custom" ROM are all going to be about the same. Since we cant overclock, or upgrade past 2.3.3 yet. They are all just tweaked a little differently, like my ROM in comparison to COLA, has only a few minor differences... IT-ROM has the camera mod built in, has toggles built in to the theme, carrier name removed, and a few other cosmetic changes.... the next update will have tweaks built into the build.prop, adds a green dialer theme, and replaces font with stock font. This is my first attempt at playing with roms. It was more of a learning tool for me to get the basics down for removing system app, replacing system app, and what not.
XperianceIT
sent from my Xplay R800X, using XDA App!
Tip: if you want to create an update.zip, pull the /system folder and make symlinks in the update script.
Logseman said:
Tip: if you want to create an update.zip, pull the /system folder and make symlinks in the update script.
Click to expand...
Click to collapse
Well you think that but it wont work
Cola has to have /data/ to work
I'm the one who design it so trust me I know.
Once you loose data the rom is broken.
Logseman said:
Tip: if you want to create an update.zip, pull the /system folder and make symlinks in the update script.
Click to expand...
Click to collapse
Hey thats awesome info! I was wanting to do something like that but wasnt sure how to make a update.zip, and really didnt want peope to have to reflash the entire ROM again, i know how frustrating it is to have to re-do all your desktops, and widgets, and re-enter al your accounts and sync info.
Would you mind PM'ing me, or post it here, on how to make the symlinks, i am 100% unfamiliar with doing that. (im still learning all of this) Even if it doesnt work with the COLA based ROM, i'd stil like to learn this for future projects, and well, just cause its something I dont know how to do, and I ike to learn.
Hogwarts said:
Well you think that but it wont work
Cola has to have /data/ to work
I'm the one who design it so trust me I know.
Once you loose data the rom is broken.
Click to expand...
Click to collapse
I know a little bit too, don't worry. You need to keep the Setup Wizard APK which, if absent, breaks the Home button in case of a data wipe. Plus, even if you put a /data folder, it can be empty.
XIT, I think the best that you can do for the symlinks is to grab another ROM (from the Play if possible), unzip it and check its symlinks. I'm not too sure of what symlinks your ROM needs. You can see the symlinks in the update script file in the Meta-Inf folder.
Logseman said:
I know a little bit too, don't worry. You need to keep the Setup Wizard APK which, if absent, breaks the Home button in case of a data wipe. Plus, even if you put a /data folder, it can be empty.
Click to expand...
Click to collapse
wont work.
locked bootloader cant flash a whole filesystem and datasystem
thats why UK rom has to be flashed as nandroid
1-2 files with the wifimodules work because your just pushing something
but when you try to
format /system
push /system
format /data
push /data
it basicly is going to wipe out CWM recovery in the process because if ur aware the CWM resides in system folder
so yes it wont work for locked bootloader
also I wouldn't keep setup wizard because it is a costly file to keep when it's never needed
the cost is about 1.2 mb not including data if i remember correctly.
so its gone.
when you use nandroid backup you dont need it anyway
I think you're right, I forgot about where the cwm was.
Logseman said:
I think you're right, I forgot about where the cwm was.
Click to expand...
Click to collapse
ya i know because i've tried it myself
i created update .zip and the CWM would always return error
i could never get it to work as many times as i tried
I like it, very nice. Plenty of space, apps and drawer loads faster. I implamented the "adb shell, pm setInstallLocation 2, exit". That way I can choose pretty much any app to be moved to sd or installed to sd. Stable rom so far today, no issues.
Sent from my R800x using xda premium
Hogwarts said:
Well you think that but it wont work
Cola has to have /data/ to work
I'm the one who design it so trust me I know.
Once you loose data the rom is broken.
Click to expand...
Click to collapse
/data/ has never been required for me.
Sent from R800x
Greetings!
I have decide long enough and here i am, trying to build my own ROM and share with you guys.
I am still new in creating my ROM, yet i wanna challenge myself and try to have fun with it. To be honest, it is harder than i thought with no complete tutorial out there.
I am planning to start things slowly and learning as i go along. Thus, i start with the basic, modifying stock ROM, and de-odex them. Clear all the bloatware or what i think is not necessary.
Please take note this is just a trial. If you are interested, do try out, and let me know how or where i can improve. I am noob, please don't flame me.
Current Release
MJ ROM: Trial Version 1.3 - 16.04.2012
Firmware: I9100XWLP7
CSC: XENLP3
Kernel: current LATEST Siyah Kernel v3.1rc4 (dual boot supported )
Coming Soon:
add in call recording feature
add in toggle bar - Postpone! Seems like Lidroid method will supercede my translucent status bar.will fine other method to make both thing works.
planning to switch launcher, as i am not too fond with Apex (suggestion please)
create my own logo (might take times, still figuring out)
Beats audio, anyone? (some claim it doens't work, does it? )
Click to expand...
Click to collapse
Bugs:
Not everything is perfect, though i expected a perfect ROM to ease everyone. However, there are some minor bug i encounter. Not a big deal.
- Keyboard not poping up at the initial setup the ownership of the phone
solution: i realise it takes time for the ROM to load up the keyboard (maybe due to language change from netherland to english - united state issue). what i do is, i just press back and forward few time, and the keyboard will initially pop up. don't worry, it just happen the very first time android setup. no more issues after that.
- Messaging app cannot use
solution: i suspect this is Apex Launcher issues. just delete the dock bar Messaging shortcut. Drag and put the new Messaging app from app drawer and you are good to go.
Click to expand...
Click to collapse
Change Log - trial version 1.3 - 16.04.2012:
latest siyah kernel v3.1rc4 with dual boot supported!
add in cool boot animation (my own creation )
add in honeycomb battery mod as default
Click to expand...
Click to collapse
Change Log - trial version 1.2 - 15.04.2012:
latest siyah kernel v3.1rc3 with dual boot supported!
50% translucent status bar
open up hidden samsung cool wallpapers! more selection available!
add in cool boot animation (android destroy apple!)
add in big android battery mod - Done! All you need to do is to download the zip file from below link and flash it with CMW recovery option. Simple and easy. (separate flashing)
add in honeycomb battery mod (separate flashing)
Click to expand...
Click to collapse
Change Log - trial version 1.1 - 14.04.2012:
SuperSU (FULLY ROOTED NOW! )
CWM with touch menu!
latest siyah kernel v3.1rc2 with dual boot supported!
old bootloader for use of USB jig (fully tested, remove yellow triangle and remove binary counter! )
overclock to 1.4ghz
Click to expand...
Click to collapse
Change Log - trial version - 13.04.2012:
Apex Launcher v1.5 (Touch Wiz launcher remove due to force close)
Fully Deodexed
Zipaligned
BusyBox
SuperSU (not really working, i lost the root access, not sure why )
NO WIPE
remove all bloatware and unnecessary apps
Click to expand...
Click to collapse
Benchmark scores for reference:
Quadrant Benchmark(1.2ghz): 3866
Antutu Benchmark(1.2ghz): 6399
WARNING: i have tried running overclock to 1.4ghz, but the score is opposite. i got very ridiculous low score in quadrant benchmark. bug in new firmware?
Don't try to overclock unless you know how to fix it.
Click to expand...
Click to collapse
WHO SHOULD TRY
-Those who want total stock ROM experience with root access,
-Those who is kind enough to train a new developer for S2 and keep the development alive!
Before you did any chances or installation, please make a backup just in case you are not happy and wanna revert back! I will not be responsible for any damages occurred to your phone! I have tested everything myself before i release it to the public, to minimize the errors.
Installation Guide
- Download the ROM (don't unzip)
- Copy the .ZIP file to your INTERNAL SD card
- Boot your phone into CWM (hold Vol Up, Home & Power Button)
- Wipe data/factory reset
- Wipe cache
- Wipe dalvik cache
- Select 'Install ZIP from SD Card'
- Select 'Choose Zip from SD Card'
- Then select the the rom .zip file you downloaded
- Reboot
Battery Mod Installation Guide
1. Download the Battery_Mod.zip.
2. Put it in your internal SD card.
3. Open CMW from your app drawer.
4. Choose "Flash update" (Flash and update .zip).
5. Browse for the Battery_Mod.zip file.
6. Flash it and enjoy!
DOWNLOAD
MJ ROM TRIAL VERSION 1.3 IS UP FOR FREE!
CLICK HERE TO DOWNLOAD
Download Big Android Battery Mod Here!
Download Honeycomb Battery Mod Here!
Screenshot as per below.
New screenshot for new release added (MJ - Trial version 1.3)!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NEW Battery MOD with Big Android!
New screenshot for new release added (MJ - Trial version 1.3)!
Credit:
Currently quite busy with modification. Will add in every help i got from this xda shortly.
Credit back to respective developers!
LP7 it's not AOSP man ! it's SAMMY-based.
by the way, welcome here and good luck in this jungle.
for the beginning, try to post some screenshoot, of course to full root your rom, choose a sympathic theme, put call recording and the new siyah kernel.
cya !
nesquix said:
LP7 it's not AOSP man ! it's SAMMY-based.
by the way, welcome here and good luck in this jungle.
for the beginning, try to post some screenshoot, of course to full root your rom, choose a sympathic theme, put call recording and the new siyah kernel.
cya !
Click to expand...
Click to collapse
thanks man! btw, is it legal to use theme provide here? can i use the mod they provide here? i scare i violate the rules or whatever copyright thingy.
U can use themes,apps and other mods from developers just ask their permission first and credit them in your op.
About supersu,you need to install(push) binary for it to work. Think it's binary is a xbin file, but not sure ask in chainfire thread.
anyways good luck with your project
zodiaxe66 said:
U can use themes,apps and other mods from developers just ask their permission first and credit them in your op.
About supersu,you need to install(push) binary for it to work. Think it's binary is a xbin file, but not sure ask in chainfire thread.
anyways good luck with your project
Click to expand...
Click to collapse
thanks for your hints and advise. really appreciate it.
edit: i think i found the reason on why my custom ROM is not rooted. it seems like i am using stock ROM unrooted, that's why it is not rooted. base on my research, i just have to flash the stock ROM, root it, flash kernel and old bootloader. back up, and start cooking afterward. correct me if i am wrong.
anyway, gonna try it tomorrow. used almost full day in trial and error, at least i can flash and run my first trial.
Mj rom trial version 1.2 is here!
MJ Rom Trial Version 1.2 is up!
Try it out for free!
Please don't flame me. Learning in progress.
New big android battery mod added!
Follow the steps below to flash it to my ROM:
1. Download the Battery_Mod.zip.
2. Put it in your internal SD card.
3. Open CMW from your app drawer.
4. Choose "Flash update" (Flash and update .zip).
5. Browse for the Battery_Mod.zip file.
6. Flash it and enjoy!
Might compile couple more battery mod to suit different people. Stay tune!
Bugs encounter. No worry, just a minor one.
Other than that, everything should work fine.
hi guys, thanks for trying out my own. i realise it is kinda messy, so i decide to try to recompile every for next release. hopefully the minor bug can be fixed.
give me sometimes as i am doing everything from scrap.
Good luck to u project .
milandhal said:
Good luck to u project .
Click to expand...
Click to collapse
thank you
MJ ROM Trial version 1.3 is up
I am very happy to propose you my first custom rom/mod for the Huawei Mediapad / T-Mobile Springboard! This rom is based on the release S7-301u,Android4.0,C232B005,General_Channel and should work on all versions of the device. The system has been made as light as possible and all "unnecessary" application has been removed.READ CAREFULLY:
This will WIPE you device
You need a SD-Card to install this rom
You are doing this at your own risks
Rom Description:
This rom is my daily driver, I like my tablet, clean without anybloatware or unneccessary app or widgets from T-Mobile or Huawei
Based on firmware C232B005 - Android Gingerbread 4.0.3
Rooted - latest version
Removed all unnecessary applications
Latest version 2.06.26:
Make a backup before installing, I am not responsible if YOU don't know what you are doing! I am not asking for donation but press the thanks button and please Vote for this thread tooCredits:
comec for letting us know for the newer ICS version
mendozinas, for his online kitchen
Before asking a question, use this button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and watch this , thanks:
v2.06.26
New Base - S7-301u, C232B005
New Notification Toggle, a must until we have AOKP or CyanogenMod
Updated SuperSU
Updated SolidExplorer
Updated GMail
v2.06.08
Fixed - Skype video is now fully functional - Credit to rac!, bduvel and OrDroid
Fixed - Battery in percent under 15%
v2.06.06
New Base - C170B008
Rooted with SuperSU - Thanks to Chainfire
New file explorer - Solid Explorer - Thanks to glodos
All bloatware removed
Fully zip-aligned and deodexed so if people want to theme it, now is the time
Battery Mod in %
Default language set to English
New boot animation
v2.05.27
Rooted with SuperSU - Thanks to Chainfire
All Chinese bloatware removed
Added latest Google play
Battery Mod in %
Default language set to English
New boot animation
Frequently Asked Questions:
Why can't I have root access from Solid Explorer
Did you install BusyBox?
if not, go to Google Play and install BusyBox.
Once installed, open it and install "for REAL" Busybox in your device
you can now un-install the Busybox APK
Open Solid Explorer and try to do something where you need root acess -> you should be prompted
Can I use this rom on a T-Mobile device
Yes, you will still be in HSPA+ (4G)
I personally reach without problem 5.6Mbps in download and over 2.7Mbps in upload
What is the difference between this ROM and the official one
Not much
It is de-bloated, have battery in % and starts in English
it is fully deodexed and zip-aligned
you may find it a bit snappier
Why can't I see this ROM is ROM Manager
So far we don't have a fully functional CWM, I may work with another dev to achieve this, fingers crossed!
I can't connect to the internet
Did you check if your APN is correctly set?
If not, go here and feel free to participate: http://forum.xda-developers.com/showthread.php?t=1669485
Can I update my device without wiping my device
You surely can, DO A BACKUP
Download the latest firmware, DO A BACKUP
unzip the dload folder and the update.zip inside of it, DO A BACKUP
Now put your device in fastboot mode -> volume+ & power, DID I TELL YOU TO DO A BACKUP????
Flash the system partition using this command: fastboot flash system system.img.ext4, TOO LATE FOR THE BACK UP
Flash the "customization" partition using this command: fastboot flash cust cust.img.ext4
Reboot
Polish language
This version supports the Polish language?
alquere said:
This version supports the Polish language?
Click to expand...
Click to collapse
You would need to try, i didn't alter any language ncluded in the original rom
Sent from my HUAWEI OsiMood-ed MediaPad using XDA Premium HD app
I want to use with S7-302u .
How do I modify it?
chok_thewa said:
I want to use with S7-302u .
How do I modify it?
Click to expand...
Click to collapse
you dont need to modify anything, just maybe you'll need to flash the "original" modem files using fastboot
First make sure you have the modem files for you device!
Thanks for the job hoping to see more speed improvememt
monkeydrufy said:
Thanks for the job hoping to see more speed improvememt
Click to expand...
Click to collapse
New version is on its way based on the russian B008, really smooth and deodexed at least for the apps
It will be even lighter just the way I like it
CarpeNoctem said:
New version is on its way based on the russian B008, really smooth and deodexed at least for the apps
It will be even lighter just the way I like it
Click to expand...
Click to collapse
I was going to ask for this one! But now all I need to do is wait! Thanks!
Thanks for your hard work
john9 said:
Thanks for your hard work
Click to expand...
Click to collapse
I dont really do much here... I just clean up the mess
Can not download the MediaPad OsiMood v2.06.02.
it's say "Download path is invalid!"
no7749 said:
Can not download the MediaPad OsiMood v2.06.02.
it's say "Download path is invalid!"
Click to expand...
Click to collapse
Should be fixed now
Can I update from 2.05.27 without losing any data?
dark_fighter said:
Can I update from 2.05.27 without losing any data?
Click to expand...
Click to collapse
Yes,you can . I tested by myself.
how? do i flash normaly?
chok_thewa said:
Yes,you can . I tested by myself.
Click to expand...
Click to collapse
No,no, I'm sorry .It will wipe all data.
It is written in the OP, flashing will WIPE
Battery level is incorrect when actual level is lower than 15%.
Please make patch for solving this problem.
Sent from my HTC Incredible S using xda premium
how to get skype working on this?
aside from skype everything is working great!
Hello everyone,
Just wanted to share my personal build based off the latest concept rom, saw that there weren't any active builds for concept so I decided to share my own, nothing fancy, just a few basic features
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Code:
Based off latest Sony Concept Firmware- .3657
Full root access- (Rooted with Super SU (2.79) + DM-verity removed + latest busybox (1.26.2))
Deodexed
Removed AOSP core apps- replaced with Google apps- Dialer, Contacts, Messaging
Debloated (Apps can be found in Play Store)
Zipalign
Init.d support in system & kernel + init.d tweaks
Sqlite tweaks
Superuser mod for signature verification
Optimized Qualcomm GPU files
Plus a few other things :)
Disclaimer
Code:
Flash at your own risk, I am not responsible for any data loss, any bricked or dead phones. Always make backups
Instructions:
*** Please make sure your bootloader is unlocked and you are already rooted and running the latest concept rom ***
D5803 only
1) Reboot recovery- TWRP is recommended
2) Wipe the following partitions:
System
Data
Cache
Dalvik
3) Install rom
4) *** Recommended- Install DRM Fix to restore camera functionality here ***
Reboot
Please note first boot may take a long time- be patient
Important- Go to settings-apps-default apps-set Phone to Google Dialer
Screenshots
Downloads
Please note this initial release is a beta, everything should work as intended but you never know
https://www.androidfilehost.com/?fid=745425885120702422
MD5: 3f92a785b954cd7b62b8e362fe4aa271
Coming Soon
Extra debloating + guide
Battery life guide for concept + recommended apps
Feel free to suggest improvements
Credits
Sony Concept Team
@Chainfire
@Ticklefish
@osm0sis
@serajr
@franciscofranco
@DavidMKD
@Androxyde
If I forgot to add you to credits please let me know and I will add ASAP :good:
Please press thanks if you like the rom
.
Debloat Guide
Below is a list of system apps that are potentially safe to remove.
Always make sure to have backups.
My recommended app is Titanium Backup to remove/disable apps.
If you are unsure, try freezing/disabling a few apps to see how things go
Second List- Stats
This is a list of system Sony Data collection /Stats apps. I have been testing these for a day or so and they appear fine to remove but this one is a maybe, please note that I do not use sony apps like keyboard or xperia home, only the xperia email so thse sony apps may/may not be related to those apps. You can always try for yourself and see:
If you are unsure about an app I will do my best to try and figure out what it is. Also if I missed any or if anything needs to be added please let me know :good:
To state the obvious, if you are uninstalling things like stock launchers, keyboards and things, always make sure to have the replacement app set up before you uninstall things
Good Luck
One more
First! ... this ROM is based Stock? Compatible with the model D5833?
Thank you very much for the support
pickandrew said:
First! ... this ROM is based Stock? Compatible with the model D5833?
Thank you very much for the support
Click to expand...
Click to collapse
Hi there,
This is not based off stock, this is based off Sonys Concept Rom, you can find more info here:
https://forum.xda-developers.com/z3-compact/general/sonys-android-concept-marshmallow-t3229536
It's more lightweight than stock and is closer to AOSP, with a few sony features.
I dont have a D5833 so I cannot confirm if this works or not, if you want to try it you can, just make sure to a have a backup ready
Hey there, thanks for this ROM!
I'm on latest Concept with SuperSU 2.79SR3 and Xposed installed. Could I dirty flash your ROM if I uninstall Xposed first? Or should I wipe everything?
What about the camera quality in comparison to stock? Is fisheye effect present?
systemallica said:
Hey there, thanks for this ROM!
I'm on latest Concept with SuperSU 2.79SR3 and Xposed installed. Could I dirty flash your ROM if I uninstall Xposed first? Or should I wipe everything?
Click to expand...
Click to collapse
Clean flash is always recommended to prevent future issues. Best to play safe and do a full wipe :good:
birsir said:
What about the camera quality in comparison to stock? Is fisheye effect present?
Click to expand...
Click to collapse
Camera quality should be same as stock, no fisheye.
This ROM is based off official Sony Concept firmware
Second post updated with debloating list. If you want me to provide explanations for each app I am happy to do so.
As always, make sure to backup before modifying your system., I always recommend Titanium Backup to remove/backup apps.
I have taken system apps down from about +-150 to about 85.
I have also disabled a few extra things that are not on the list like NFC services because I don't use this feature.
Good luck :good:
I get error 7 when installing. I delete this lines in the zip and get error 6. I can' t install the rom! What can i do?
dav6wat said:
I get error 7 when installing. I delete this lines in the zip and get error 6. I can' t install the rom! What can i do?
Click to expand...
Click to collapse
Zip installs fine for me, please can you provide more information? Just saying you get status 7 is not very helpful.
1) Have you tried re-downloading the rom and checking the md5 to make sure it is not corrupted.
2) This has only been tested on D5803, D5833 may not work
Also make sure you are running the latest version of TWRP and that you are already running concept rom and is rooted
22sl22 said:
Zip installs fine for me, please can you provide more information? Just saying you get status 7 is not very helpful.
1) Have you tried re-downloading the rom and checking the md5 to make sure it is not corrupted.
2) This has only been tested on D5803, D5833 may not work
Also make sure you are running the latest version of TWRP and that you are already running concept rom and is rooted
Click to expand...
Click to collapse
My device is D5803 too. I try 2 downloaded rom ams checked md5. Is this the latest TWRP recovery https://dl.twrp.me/z3c/twrp-3.0.2-1-z3c.img.html ?? I think could be the recovery...
may I suggest including DRM restore function?
https://forum.xda-developers.com/crossdevice-dev/sony/xperia-z1-z2-z3-series-devices-drm-t2930672
Edit: I saw it's included in OP.
dav6wat said:
I get error 7 when installing. I delete this lines in the zip and get error 6. I can' t install the rom! What can i do?
Click to expand...
Click to collapse
Try redownloading the ROM.
This is the screenshot of the error 7. I' m in Concept 3657, rooted with superSU 2.79, with TWRP 3.0.2-1.
If i edit script in zip file, deleting assets line, and rename file to 220117_Concept_Plus_Beta2.zip, then gives me error 6.
dav6wat said:
This is the screenshot of the error 7. I' m in Concept 3657, rooted with superSU 2.79, with TWRP 3.0.2-1.
If i edit script in zip file, deleting assets line, and rename file to 220117_Concept_Plus_Beta2.zip, then gives me error 6.
Click to expand...
Click to collapse
Have you tried redownloading the rom
---------- Post added at 10:50 AM ---------- Previous post was at 10:48 AM ----------
So I am having Bluetooth issues and when someone is calling me it doesn't display the thing where it says to answer,I need to wait for the person to hang up then call them back.
Could it be because I flashed this ROM over CM12.1?
Have you tried redownloading the rom
Click to expand...
Click to collapse
Yes, I redownloaded 4 times, and same error.
dav6wat said:
Yes, I redownloaded 4 times, and same error.
Click to expand...
Click to collapse
For me sometimes it would work to flash TWRP MultiROM recovery from here:
http://www.dl.myself5.de/aries/MultiROM/TWRP-Multirom-20160606-00-aries.img
If it doesn't want to download then long press on the link and press the last option which should say like "Download connection".
Dinkec27 said:
Have you tried redownloading the rom
---------- Post added at 10:50 AM ---------- Previous post was at 10:48 AM ----------
So I am having Bluetooth issues and when someone is calling me it doesn't display the thing where it says to answer,I need to wait for the person to hang up then call them back.
Could it be because I flashed this ROM over CM12.1?
Click to expand...
Click to collapse
Yes, possibly. As per first post, please make sure you are already running the concept rom and are rooted. Also make sure to set Google Dialer as default dialer
22sl22 said:
Yes, possibly. As per first post, please make sure you are already running the concept rom and are rooted. Also make sure to set Google Dialer as default dialer
Click to expand...
Click to collapse
Oh okay,then I will reflash to concept,root it and install the rom again and I will keep you up to date.
Hi.. First of all i want to say i am not responsible for anything if your device would be broken while doing this steps.
BACK UP YOUR ALL STUFFS
I tried on my device and it is working. So i want to help to A2017U users who wants to MiFavor 5.0. I added screenshots from my devices at the end of topic.
I am not good at English. I hope you can understand what i mean
IT IS WORKING ON A2017G MODEL TOO
AGAIN AND AGAIN. PLEASE READ ALL TOPIC. AND BE SURE YOU ARE RESPONSIBLE FOR EVERYTHING.
0. Back up your all data and your IMEI and current ROM or etc. Your internal or external storage will not be wiped. Just in case.
1. Download files from this topic. [url]https://drive.google.com/file/d/0Bxx5zEkXrECaWXlsZHRpbzlMazQ/view[/URL]
2. Download A2017_B15_Bootstack from here. [url]https://drive.google.com/open?id=0B9-QLXYJGAyWeUFjeWtTWXpFakE[/URL] [File is from djkuz, i just edited it. Actually just deleted 1 file lol].
3. Go TWRP.
4. Install Bootstack.
5. Move ROM folder to TWRP/backup/xxxxxxx folder.
6. Go restore from TWRP menu and select ROM which you downloaded.
7. Install SuperSU to Root it. (OPTIONAL)
8. Reboot.
Installation Video
https://www.youtube.com/watch?v=8eu_XabW1mA
To activate Google Services.
0. Go MiAsistant.
1. Slide to left and go App Manager
2. App Freezing.
3. Cancel Google Play Services.
4. Install [url]https://forum.xda-developers.com/attachment.php?attachmentid=4214487&d=1500300688[/URL]
thanks @gotospeed
You can download GooglePlay Store or other google apps from www.apkmirror.com
if you want to go back U version;
0. Go TWRP
1. Flash B25 Bootstack from DrakenFX.
Thats all.
thanks
@djkuz as i remember his name
@DrakenFX
Please press hit thanks button if I help you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What's the performance of this ROM, and how big is the changelog compared to mifavor 4.2?
Any info if it will be released for a2017u/g officially?
ГАСООП said:
What's the performance of this ROM, and how big is the changelog compared to mifavor 4.2?
Any info if it will be released for a2017u/g officially?
Click to expand...
Click to collapse
I don't know when will it be released. I don't use long time, so I can not compare. But design is better so far for me
Hello, thanks for your work, I want to install this Rom but the step 6 is a little confusing, cause I don't know which Rom should install, link of download has a lot of files.
Can you please update this step with names of files to install?
Hebelm16 said:
Hello, thanks for your work, I want to install this Rom but the step 6 is a little confusing, cause I don't know which Rom should install, link of download has a lot of files.
Can you please update this step with names of files to install?
Click to expand...
Click to collapse
Edited link, please download it.
More screenshots please
Laleka said:
More screenshots please
Click to expand...
Click to collapse
added :good:
WesTD said:
added :good:
Click to expand...
Click to collapse
What about the music player? Same or different
I really hope that version 5.0 only comes to Asian phones (if at all and at most) because that's what typically people from there like. But in my opinion, the new style just moves further away from stock Android look and closer to iOS. The skin looks "heavy" and "bloat -ish". The notification toggles UI got worse and the rounded notifications is not useful. It's like a bit more childish theme. Would be nicer if ZTE actually let us and not them customize the notification toggles. They literally removed one of Android Nougat's offered feature here: customized toggles and hidden menu.
this method is working on G model too.
Installed and followed the instructions to the tee. I have the U variant. Phone is not booting into system, recovery or EDL mode. When trying to power on the phone it vibrates and light blinks twice. Same when trying to boot into recovery.
EDIT: I fixed my problem. It just isnt booting after following the steps tho.
crashnova said:
Installed and followed the instructions to the tee. I have the U variant. Phone is not booting into system, recovery or EDL mode. When trying to power on the phone it vibrates and light blinks twice. Same when trying to boot into recovery.
EDIT: I fixed my problem. It just isnt booting after following the steps tho.
Click to expand...
Click to collapse
Yeah, guess we'll have to wait and hope MiFavor 5 officially comes to the U version. After many months of using custom ROMs, I came back to plain stock + root and realized how much I missed it. Stock ROM with Nova Launcher isn't that bad. I mean without Xposed, not THAT much you can do on custom ROMs anyway, with the exception of a few minor tweaks here and there. At least not with what I want.
@WesTD do me a favor, please. Create another backup and include system, data and boot. I'm going to make a flashable zip.
ChiDi9901 said:
I really hope that version 5.0 only comes to Asian phones (if at all and at most) because that's what typically people from there like. But in my opinion, the new style just moves further away from stock Android look and closer to iOS. The skin looks "heavy" and "bloat -ish". The notification toggles UI got worse and the rounded notifications is not useful. It's like a bit more childish theme. Would be nicer if ZTE actually let us and not them customize the notification toggles. They literally removed one of Android Nougat's offered feature here: customized toggles and hidden menu.
Click to expand...
Click to collapse
They have added this feature in 5.0
JackTheBest said:
They have added this feature in 5.0
Click to expand...
Click to collapse
That is good news! In this case I welcome functions over style as long as the style doesn't restrict them.
Gesendet von meinem SGP611 mit Tapatalk
I will add installation video soon.
Installation video.
https://www.youtube.com/watch?v=8eu_XabW1mA
It worked on my 2017U. Instead of installing the Google Play Services linked in the OP, I installed it from apkmirror, along with Google Play Store. Worked perfectly. One thing I would like to add, if you are being prompted for a password upon startup, go to TWRP and perform a factory reset. I was and that's what worked for me.
Does Magisk work on this?
It looks like an update came out
https://4pda.ru/forum/index.php?showtopic=814221&st=1280#entry63361136