Hi everybody,
I've a big problem with a friend's Motorola XT912 Verizon 4G-LTE
This phone was on 4.1.2
672.300.400.XT910.Asia3Retail.en.CN and GAS_ASIA_SPYDERICS_P008 but no Google APPS.
I rooted it and installed Safestrap recovery successfully but when i power it on it boot into AP Fastboot Mode, i everytime manually boot to normal boot by pressing the 3 butons. I used Matt's DROID_RAZR_Utility_Jellybean_XT912 to fix it. Done with success but no network!
I tried to fix it too and now my problem started.
My BIG mistake is i tried to flash another official firmware and now it's stuck on this screen:
AP Fastboot Flash Mode (S) (Boot Failure)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Devices is LOCKED. Status Code: 0
Battery OK
OK to Program
Transfer Mode:
USB Connected
Invalid CG OTV (CG: Invalid SP Data)
Invalid CG Version (CG: system)
Invalid CG OTV (CG: system)
Google for 672.300.400.XT910.Asia3Retail.en.CN and NOTHING found!!!
When i try with Matt's DROID_RAZR_Utility_Jellybean_XT912 i get errors on CDT.BIN file "infopreflash validation failure (No such file or directory)"
RSD Lite got error on "6/18 cdt.bin".
Same error with recovery, boot and devtree files!
Can't access into recovery mode too.
HELP ME! Someone can give me the link for the 672.300.400.XT910.Asia3Retail.en.CN version?
Or give me a solution to get this Rarz XT912 Verizon back! I'm desperate! :crying:
Come on guys need your help PLEASE!
Nobody can help me? Need help to take me out from this hell
Still waiting...
Are you positive it is an xt912? I see Asia in the firmware name suggesting it is actually an xt 910 (I.e. not us version for use on Verizon CDMA network, but the version designed for gsm networks everywhere except the us). If so you need the version of matt's utility designed for the xt910 in order to flash back to stock.
Sent from my Droid RAZR Maxx (XT912, spyder) using TapaTalk.
can use this rom "http://forum.xda-developers.com/showthread.php?t=2434629" and is perfect for walking with other DepNet.com for as kikat 4.4.2 .. I have no signal!
XT912 Verizon 4G-LTE problem
WaveMaster1406 said:
Hi everybody,
I've a big problem with a friend's Motorola XT912 Verizon 4G-LTE
This phone was on 4.1.2
672.300.400.XT910.Asia3Retail.en.CN and GAS_ASIA_SPYDERICS_P008 but no Google APPS.
I rooted it and installed Safestrap recovery successfully but when i power it on it boot into AP Fastboot Mode, i everytime manually boot to normal boot by pressing the 3 butons. I used Matt's DROID_RAZR_Utility_Jellybean_XT912 to fix it. Done with success but no network!
I tried to fix it too and now my problem started.
My BIG mistake is i tried to flash another official firmware and now it's stuck on this screen:
AP Fastboot Flash Mode (S) (Boot Failure)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Devices is LOCKED. Status Code: 0
Battery OK
OK to Program
Transfer Mode:
USB Connected
Invalid CG OTV (CG: Invalid SP Data)
Invalid CG Version (CG: system)
Invalid CG OTV (CG: system)
Google for 672.300.400.XT910.Asia3Retail.en.CN and NOTHING found!!!
When i try with Matt's DROID_RAZR_Utility_Jellybean_XT912 i get errors on CDT.BIN file "infopreflash validation failure (No such file or directory)"
RSD Lite got error on "6/18 cdt.bin".
Same error with recovery, boot and devtree files!
Can't access into recovery mode too.
HELP ME! Someone can give me the link for the 672.300.400.XT910.Asia3Retail.en.CN version?
Or give me a solution to get this Rarz XT912 Verizon back! I'm desperate! :crying:
Click to expand...
Click to collapse
hi, am facing this same problem, been battling it for weeks now. please how did you resolve the issue? thanks much
Related
i am stuck at the ap fastboot step when i tried to use the droid razr utilities tool to restore the rogers razr stock rom, cant boot the phone.
i am stuck at here:
AP fastboot Flash Mode (S) (Boot failure)
0A.0C
Device is locked, status code:0
Battery OK
OK to program
Connect USB
Data Cable
invalid CG OTV (CG system): Invalid SP Data
invalid CG HAB (CG:system, status 0X004E)
invalid CG OTV (CG: system)
i don't know what should i do next, can u please help???
Factory Cable for Razr
I am having the same issue...or actually, my buddy who tried to root his Razr and had asked for my help. I even got a factory cable, but so far, any and all instructions are quite vague. Can anyone provide a simple detailed step by step on how to fix this phone???
I don't understand where to use the CMD??? Empty radio users...HELP!!
hartlin said:
I am having the same issue...or actually, my buddy who tried to root his Razr and had asked for my help. I even got a factory cable, but so far, any and all instructions are quite vague. Can anyone provide a simple detailed step by step on how to fix this phone???
I don't understand where to use the CMD??? Empty radio users...HELP!!
Click to expand...
Click to collapse
My Droid Razr Maxx is European, I went through this before, first when in AP fastboot mode erase all what's on your Razr, fastboot -w, fastboot erase boot, fastboot erase system, fastboot erase preinstall, fastboot erase webtop.
Then try to download a different country system like (6.7.2-180_SLC-34_SIGNLATAM_USASPYDRETBRPLUSB1B2B5B8B8LA033.0R_SPYDERICSMAXRETBRLA_fastboot.xml) this is the one which I used of Brazil ICS 4.0.4 and re-flashed it using RSD Lite.
Then try re-flashing your own system.
It worked for me, hopefully it works for you.
baojerry123 said:
i am stuck at the ap fastboot step when i tried to use the droid razr utilities tool to restore the rogers razr stock rom, cant boot the phone.
i am stuck at here:
AP fastboot Flash Mode (S) (Boot failure)
0A.0C
Device is locked, status code:0
Battery OK
OK to program
Connect USB
Data Cable
invalid CG OTV (CG system): Invalid SP Data
invalid CG HAB (CG:system, status 0X004E)
invalid CG OTV (CG: system)
i don't know what should i do next, can u please help???
Click to expand...
Click to collapse
instead of the utilities tool, have u tried using the latest RSDLite? (and make sure u run as Admin if ur running it from Win7 or Win8.
grab the latest Rogers fastboot, RSD Lite, reboot phone to fastboot screen (which u might not need since ur stuck there already? but try reboot it anyway), and flash the img file.
let us know what happens.
I have an XT912 on Verizon US that is currently bricked with a low battery. I tried using vel0city's method of charging in Recovery (http://forum.xda-developers.com/showthread.php?t=1549625), but when I try to access anything other than AP Fastboot I get the message:
Invalid Flash Mode (S) (Boot Failure)
0A.6C
To return to normal mode ....
Device is Locked...
Battery Low
Cannot Program
Connect USB
Data Cable
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG Version (CG: system)
Invalid CG OTV (CG: system)
When I try to power off the device and then power back on (just with the power button) it brings me back to the AP Fastboot screen. I have tried using Droid Razr Utility to fix my device before this occurred, but that did not work, and I am now stuck here. Please help me!!!
kingadam719 said:
I have an XT912 on Verizon US that is currently bricked with a low battery. I tried using vel0city's method of charging in Recovery (http://forum.xda-developers.com/showthread.php?t=1549625), but when I try to access anything other than AP Fastboot I get the message:
Invalid Flash Mode (S) (Boot Failure)
0A.6C
To return to normal mode ....
Device is Locked...
Battery Low
Cannot Program
Connect USB
Data Cable
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG Version (CG: system)
Invalid CG OTV (CG: system)
When I try to power off the device and then power back on (just with the power button) it brings me back to the AP Fastboot screen. I have tried using Droid Razr Utility to fix my device before this occurred, but that did not work, and I am now stuck here. Please help me!!!
Click to expand...
Click to collapse
Hey, I am in the same situation!! Luckily, I have one solution. This is the only way to get out of it as far as I know. So, you need to buy a Motorola Factory cable for your XT912. They are very cheap. Here's a link: http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1311&_nkw=motorola+factory+cable&_sacat=0&_from=R40
Once you have received the cable, read here on how to use it to unbrick your XT912 (just scroll down for instructions) : http://www.usbstyle.com/cables/motorola-droid-razr-xt912-factory-cable-for-fastboot-mode-unroot-unbrick-rooted/
NOTE: The Factory Cable is NOT for charging!!! The Factory Cable bypasses the "Battery Low" message (when plugged into PC), so then you put it into AP Fastboot and run Razr Utility 1.8.2! Hope I helped!
Thanks for the help! I might have to try that option... Did you see the method to charge in fastboot? It's the link on my post. I was just thinking that if I got it to charge (so that I don't have to buy the cable to bypass the battery low thing), could I fix it?
You dont need the cable. I was in the same situation and the way I fixed it was to plug the phone into a outlet. Then restart the phone - hold down both the up and down buttons, and then the power button. Wait about 10 secs....after the screen flashes and turns black, do the same thing. You should now be able to select which mode to boot into. Select NORMAL BOOT. This should give you the red Motorola screen and then the charging battery screen. Wait until fully charged and then restart phone. After restarting again and going into the boot select screen, then you can select AP FASTBOOT and everything should be fine
I had this issue the other day when trying to flash JB. Took me about 2 days to get it going again but run a google search for empty radio or something like that just fast boot flash the empty radio file then fastboot flash the system.img manually and reboot and you should be good to go
Eighthourblink, I tried doing that technique but when I booted using the "normal" method the M logo popped up for a split second, then the AP Fastboot menu came up again with the same error as before. At the top where it normally says "AP Fastboot Flash Mode (S)" it says "AP Fastboot Flash Mode (S) (Flash Failure). Pretty much I can't do anything other than access the fastboot screen. I think the reason is that when I tried using the Razr Utility (1.6 - option 2) the system files did not get transferred before the battery low error came up.
cyphrmatrix: I tried using RSD Lite to flash files over to the phone, but it will not recognize my phone. I installed the drivers correctly and the computer recognized my phone (I used to be able to use Droid Razr Utility without a problem), but for some reason RSD Lite won't find my device.
I got my phone fixed! After a week of research and failed attempts at restoring the phone back to normal, I finally found a solution. I bought Team Black Hat's factory cable converter (in order to bypass the low battery) and had to use DroidRazrUtility 1.8 in order to do the full restore. My initial problem was that I used really old software to restore the phone (DroidRazrUtility 1.42) and it just crapped out on me. Hope no one has to ever have this problem!
kingadam719 said:
I got my phone fixed! After a week of research and failed attempts at restoring the phone back to normal, I finally found a solution. I bought Team Black Hat's factory cable converter (in order to bypass the low battery) and had to use DroidRazrUtility 1.8 in order to do the full restore. My initial problem was that I used really old software to restore the phone (DroidRazrUtility 1.42) and it just crapped out on me. Hope no one has to ever have this problem!
Click to expand...
Click to collapse
please, share the file, i need that file DroidRazrUtility 1.8
Plzz help me moto xt912 is dead
Heyy guys dis is Swati
plzz help me
even I tried to flash my Moto Xt912 n now it bricked
n wat disfferent is tht
I can't even enter in AP Fastboot mode
It just stucks at motorola logo and off
I had latest cynogenmod and Lollipop
bt i was trying to flash kitkat rom
So plzzz help me out
Plzz help me
:crying:
kingadam719 said:
I have an XT912 on Verizon US that is currently bricked with a low battery. I tried using vel0city's method of charging in Recovery (http://forum.xda-developers.com/showthread.php?t=1549625), but when I try to access anything other than AP Fastboot I get the message:
Invalid Flash Mode (S) (Boot Failure)
0A.6C
To return to normal mode ....
Device is Locked...
Battery Low
Cannot Program
Connect USB
Data Cable
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG Version (CG: system)
Invalid CG OTV (CG: system)
When I try to power off the device and then power back on (just with the power button) it brings me back to the AP Fastboot screen. I have tried using Droid Razr Utility to fix my device before this occurred, but that did not work, and I am now stuck here. Please help me!!!
Click to expand...
Click to collapse
Even my moto xt912 verizon is bricked I had lollipop and was just try to downgrade to kitkat and now same only Ap fast boot mode works
I tried Droid Razr Utility but got all the commands failed
I installed all the driver correctly
Now I was trying RSD Lite but I don't understnd wy it won't show my phone connected plzz help me
Hi!
I have this problem. I looked up to fix it, but I couldn't find someone in the same situation.
I was trying to upgrade my ICS 4.0.4 to the JB Leak. Right in the beginning I followed this step, "Use the Razr Utility to restore ICS to version 6.16.211. (First attachment)
But in the process I noticed some "Fails" when the program was writing some files. I proceed and end doing a wipe data as the program asked. (Second attachment)
After this, my cellphone restarts directly to the AP Fastboot screen with a boot failure:
AP Fastboot Flash Mode (S) (Boot Failure)
0A.74
eMMC Info: Size 16G
To return to normal mode - first pres power key to power down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
Invalid CG OTV (CG: System) Invalid SP Data
Invalid CG Version (CG: System)
Invalid CG OTV (CG: Sytem)
Click to expand...
Click to collapse
I tried to flash using RSD Lite, but I Got an error in the 6th step: failed flashing process. 6/19 flash cdt.bin
Thanks if anyone can help me.
MichelBFR said:
Hi!
I have this problem. I looked up to fix it, but I couldn't find someone in the same situation.
I was trying to upgrade my ICS 4.0.4 to the JB Leak. Right in the beginning I followed this step, "Use the Razr Utility to restore ICS to version 6.16.211. (First attachment)
But in the process I noticed some "Fails" when the program was writing some files. I proceed and end doing a wipe data as the program asked. (Second attachment)
After this, my cellphone restarts directly to the AP Fastboot screen with a boot failure:
I tried to flash using RSD Lite, but I Got an error in the 6th step: failed flashing process. 6/19 flash cdt.bin
Thanks if anyone can help me.
Click to expand...
Click to collapse
Guys, sorry for reposting, but I think I fixed it!!!
The 7th stock rom I found worked on RSD Lite 6.1. Now in step 15/21...
I'm waiting till the flash process ends so I'll post the results.
_____________________
It really worked. After trying another six roms, I found one which passed on the 6th step on RSD Lite.
I'm from Brazil, and the only ROM that worked was a brazilian retail which was equal/newer than I had.
So, I was trying to root the phone, something got messed up and now it fails to boot. When I try to boot normally or recorver I get:
----------------------------------------------------------------------------------------
Invalid Flash Mode (S) (Boot Failure)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
Invalid CG OTV (CG:system): Invalid SP Data
Invalid CG HAB (CG:system, status: 0X0056)
Invalid CG OTV (CG:system)
----------------------------------------------------------------------------------------
Right now I'm charging the phone again because the battery is low.
When I download the stock ROMs from anywhere I get 1 of 2 problems, either I cant extract it completely because:
1 or more files are "corrupt" or the XML file is "wrong"
or when using RSD lite It stops at 1/16 - 3/16 because "Phone returned fail"
All I need to do is reinstall the stock ROM or a custom one in order to even get the phone usable.
Is there a way to unlock the bootloader to install a ROM from this situation? I'm unable to boot normally or recovery.
Please help :c
MORE INFO:
So while trying to manually flash 4.1.2 jellybean back onto my razr, it wouldnt flash system.img or cdrom
Keeps telling me it failed, and when using RSDlite, it now goes up to about step 11/16 or 10/14 (depending on the fastboot files) which is where it's trying to flash system.img.
I need the xt912 4.1.2 jellybean fastboot files.
Right now I have the phone jumpcharging so there is no problem with low battery, but when flashing the phone I've tried RSD lite, fastboot.exe and moto-fastboot.exe/mfastboot.exe
When using any of those I just cant flash system.img and CDrom, sometimes in Matts utility it won't flash the preinstall.img.
Hi,
I made a mistake by trying to flash my phone with DROID_RAZR_Utility_Jellybean_XT912 and bricked it.
Now when I try to power up device I get:
AP Fastboot Flash Mode (S) (Flash Failure)
OA.74
eMMC Info: 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Transfer mode:
USB Connect
When I try Normal power up from Boot mode I get:
AP Fastboot Flash Mode (S) (Flash Failure)
OA.74
eMMC Info: 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Transfer mode:
USB Connect
invalid CG OTV (CG: system): invalid SP data
invalid CG Version (CG: system)
invalid CG OTV (CG: system)
I went through many forums and fount few solutions, BUT basically all solutions require download right stock ROM and try to flash phone using RDS lite or EternityProject Flash-IT. And this is biggest problem-
sbf.droid-developers is down;
eternityproject is down too and ALL discussions point to these pages for downloads (it seems that everybody thought that these pages would work forever) there are NO mirrors or alternatives.
So basically I am in the dead end.
Perhaps somebody knows alternative download sites or can share needed files???
I have Motorola Razr Maxx XT910 (not XT912 ) I live in East Europe (EU)and I need 672.180.41.XT910.Retail.en.EU (at least I think it will work for me) firmware with XML file for RDS Lite flashing, or EternityProject Flash-IT tools.
Hello mate,
I bricked my XT910 today too anyway check this site fwteam.grupoandroid . com
I am new user, I cant post link... sry
Angel Velchev said:
Hello mate,
I bricked my XT910 today too anyway check this site fwteam.grupoandroid . com
I am new user, I cant post link... sry
Click to expand...
Click to collapse
Thanks, I'll check it out