Related
Did a full wipe, installed the ROM, and rebooted. Everything works except for cellular data, anyone have any suggestions? It's on Sprint.
Nillanic said:
Did a full wipe, installed the ROM, and rebooted. Everything works except for cellular data, anyone have any suggestions? It's on Sprint.
Click to expand...
Click to collapse
Yeah, if you had searched the AOKP thread you would have found that this was an issue with Th3Bill's first release of the MS1 AOKP rom. you have to nandroid back to your last version of AOKP (always backup before flashing a new rom) and then re-install the NEW version he has up on GOO.
R2DeeTard said:
Yeah, if you had searched the AOKP thread you would have found that this was an issue with Th3Bill's first release of the MS1 AOKP rom. you have to nandroid back to your last version of AOKP (always backup before flashing a new rom) and then re-install the NEW version he has up on GOO.
Click to expand...
Click to collapse
Will it work if I flash the older version, since I don't have a backup of this specific rom, and then flash the newer one on top of that?
And which older version should I use?
If you flash an older version it will still have the borked radios. I think the only option you have at this point is to flash back to stock and start over.
Sent from my MB855 using xda premium
You don't need to go back to stock. Just flash the new rom that works. The updated rom is great. Use SMS Backup so you can keep your txt messages.
Sent from my MB855 using xda premium
first flash the rom whatever cm10 miui aopk
second flassh the gsm zip i uploaded
third flash gapps
fourth flash option chooser dont choose any of gsm or cdma
choose emmc or sdcard
choose not ussc fix and reboot
koushi2012 said:
first flash the rom whatever cm10 miui aopk
second flassh the gsm zip i uploaded
third flash gapps
fourth flash option chooser dont choose any of gsm or cdma
choose emmc or sdcard
choose not ussc fix and reboot
Click to expand...
Click to collapse
I flashed your GSM fix, and now I dont pick up any service on ANY rom, did full wipes, restores to known working roms, all that, and still no signal.
Mind you I think it has something to do with me being on Sprint in the US
HELP MEEEE
Did u wipe full..
if u belonged to sprint us then try miui which follows some special instructions while flashing sprint phones..,
I would like to install a rom on my recently purchased galaxy facinate. I need to use the bluetooth and gps a lot, so I need a rom that has both of those working very well. What is the best stable rom to use for this? I have installed roms on previous phones and have had troubles with various functions, but I'm certain someone out there must know a good and stable one that noob like me could use.
Thank you for your time.
First take a look through this thread here http://forum.xda-developers.com/showthread.php?t=2132986 as it's a recent discussion about the same thing. Anyway, I would personally recommend CM 10.1 as I've been on it for a while now and it's rock solid (I've used BT and GPS on it too).
I want to make sure I use the proper instructions/files, I have found mixing up the roms can cause me troubles in past builds. I found these instructions on the forums, are those links still accurate for the CM10.1 build or do you know of a better installation method. Im focusing mostly on ...
--------
Step 2: Download ICS Teamhacksung Build 1 or 2 to the root of your devices sd card.
--------
but if you don't mind setting my mind at ease that I should use those files and then flash CM10.1 on top of those files/steps it will save me some headaches I'm sure. Again thank you for your time.
Step 1: Download these files to your pc:
Odin- http://www.mediafire.com/?5y0vkhz85w3j4cz
Samsung Driver- http://dl.dropbox.com/u/25089906/SAM...ile_Phones.exe
CWM4 fixed for cm7- http://forum.xda-developers.com/atta...2&d=1311907538
Stock EH03 rom- http://www.imnuts.org/downloads/fasc..._GB_CM.tar.md5
Atlas_v2.2 pit- http://www.mediafire.com/?r2mi80911vgjjjz
GB bootloaders- http://goo.gl/6aJ1N (this needs to be extracted with a program such as 7zip)
Step 2: Download ICS Teamhacksung Build 1 or 2 to the root of your devices sd card.
THS Build 1- https://dl.dropbox.com/u/69414229/fa...eng.BUILD1.zip
It looks like you pulled that from droidstyle's guide, which is exactly where you needed to go and everything is accurate.
About the THS flash... well, different people here seem to have different experiences. On my device I don't flash THS before installing anything, I go directly from flashing CWM4 to flashing whatever I want to and have no issues, but there have been people on here who get errors that way. If it makes you feel better to flash THS before CM 10.1 then go for it, it won't hurt anything, it'll just take longer.
This whole process is not something you should have to do again unless you really mess something up, once you're on CM 10.1 you only need to reboot into recovery, wipe data/davlik/cache and flash whatever other rom you want to. There are a lot of good roms available that you might want to check out, in fact one of the more popular roms Paranoid Android just came out with a new version that looks pretty good.
This phone is hard to break, just don't get careless and you'll be fine honestly.
do you need to install gapps in addition to the cm10.1 nightly? and to verify you installed cm10.1 directly after cm7 skipping gbbootloader and teamhack installs?
I also found these set of instructions that seem easier, would this be the better way to go?
/wiki.cyanogenmod.org/w/Install_CM_for_fascinatemtd
Xceptiona1noob said:
do you need to install gapps in addition to the cm10.1 nightly? and to verify you installed cm10.1 directly after cm7 skipping gbbootloader and teamhack installs?
I also found these set of instructions that seem easier, would this be the better way to go?
/wiki.cyanogenmod.org/w/Install_CM_for_fascinatemtd
Click to expand...
Click to collapse
Yes, you do flash gapps after installing cm10. You do it immediately after flashing the ROM in recovery, no need to reboot first (better not to, in fact).
Process-wise, I've never reached for Heimdall, always used Odin, but the cm wiki article looks like a more tedious process to me...
Once you've got the USB drivers + Odin installed, and the various flashable files handy, we're only talking a few steps to go from stock to cm10.1.
Do note that after you've got JT's clockwork recovery installed, the cm instructions say to flash your cm ROM directly without flashing the older THS ROM first .
Sent from my SCH-I500 using xda premium
I just bought a Samsung Fascinate and was also wondering what people are using.
I tried the latest 4.22 versions of Hellybean and JellyBro. about the only thing I noticed was that the overclock setting on Hellybean had a top range of 1.4 GHZ and JellyBro topped out at 1.2.
tekweezle said:
I just bought a Samsung Fascinate and was also wondering what people are using.
I tried the latest 4.22 versions of Hellybean and JellyBro. about the only thing I noticed was that the overclock setting on Hellybean had a top range of 1.4 GHZ and JellyBro topped out at 1.2.
Click to expand...
Click to collapse
Devil kernel dude
Sent from my SCH-I500 using Tapatalk 2
I have read through the forums and am hesitant to post, but I am stuck. I have rooted my Note II using Causal and following the tutorial after Verizon's first update.It worked great. I am not using a custom rom, but have the TRWP recovery, super user, busy box installed; I am certain that was part of the Casual Root (thank you Adam). I have also updated Casual to NoYouVerizon, but realized that my phone is already rooted. I want to update to 4.1.2 and have read to not do so OTA. Would someone please either provide a link or directions on how to update I did download the stock Root Odex - I605VRAMC3 on both my PC and my Note II, but have no idea what to do with it.
Thank you
I was in exact same scenario as you. I was rooted and was just using themes but the only way to get updated was to use a custom rom. I may be wrong but that was my way of updating. Since then I have flashed just about every rom out there that is touchwiz. Been happy with the Beans build 17.
Hope this helps!
Sent from my SCH-I605 using Tapatalk 2
SAVJR said:
I have read through the forums and am hesitant to post, but I am stuck. I have rooted my Note II using Causal and following the tutorial after Verizon's first update.It worked great. I am not using a custom rom, but have the TRWP recovery, super user, busy box installed; I am certain that was part of the Casual Root (thank you Adam). I have also updated Casual to NoYouVerizon, but realized that my phone is already rooted. I want to update to 4.1.2 and have read to not do so OTA. Would someone please either provide a link or directions on how to update I did download the stock Root Odex - I605VRAMC3 on both my PC and my Note II, but have no idea what to do with it.
Thank you
Click to expand...
Click to collapse
The best way to do it would be to flash a rom through recovery, and only a rom made for flashing in recovery (ie a .zip, NOT a tar.md5).
You need to figure out which rom you want, download it, make sure the md5 checksum matches, and the flash the zip in your recovery.
There are quite a few choices for stock TW roms, and everyone had a favorite, but you have to decide which you would want and if you want any of the added features. Here are a few of the more popular stock roms that are the latest update from Big Red:
Stock Odex/Deodex:
http://forum.xda-developers.com/showthread.php?t=2108510
This is just the latest straight Verizon stock rom and you can choose the original odex or get the deodexed version if you want to theme your phone because having a deodexed room makes themeing easier and less glitchy.
Beans 17:
http://forum.xda-developers.com/showthread.php?t=2032447
This is the latest Verizon stock rom with a few added tweak and it is themed to look like an AOSP rom.
CleanRom VZW SE 3.1
http://forum.xda-developers.com/showthread.php?t=2073390
This is the latest Verizon stock rom but it had been completely debloated and had an Aroma installer so you can choose what all you want to be present in the rom. It is different from CleanRom ACE. CleanRom ACE is the latest international Note 2 rom that had been modified to work on our phones, it usually has more updates and features than CleanRom VZW SE because CR VZW SE is the Verizon stock rom with very little added. All CleanRom roms have bloatware removed.
You also need to flash the latest radio along with your new rom if you want the newest radio that came with the VRAMC3 update, the radio will be the VRAMC3 one.
Radios:
http://forum.xda-developers.com/showthread.php?t=2108510
Sent from my SCH-I605 using XDA Premium HD app
Thank you - Can the ROM be flashed from a SD Card or does it have to be on the internal card. ?
shangrila500 said:
The best way to do it would be to flash a rom through recovery, and only a rom made for flashing in recovery (ie a .zip, NOT a tar.md5).
You need to figure out which rom you want, download it, make sure the md5 checksum matches, and the flash the zip in your recovery.
There are quite a few choices for stock TW roms, and everyone had a favorite, but you have to decide which you would want and if you want any of the added features. Here are a few of the more popular stock roms that are the latest update from Big Red:
Stock Odex/Deodex:
http://forum.xda-developers.com/showthread.php?t=2108510
This is just the latest straight Verizon stock rom and you can choose the original odex or get the deodexed version if you want to theme your phone because having a deodexed room makes themeing easier and less glitchy.
Beans 17:
http://forum.xda-developers.com/showthread.php?t=2032447
This is the latest Verizon stock rom with a few added tweak and it is themed to look like an AOSP rom.
CleanRom VZW SE 3.1
http://forum.xda-developers.com/showthread.php?t=2073390
This is the latest Verizon stock rom but it had been completely debloated and had an Aroma installer so you can choose what all you want to be present in the rom. It is different from CleanRom ACE. CleanRom ACE is the latest international Note 2 rom that had been modified to work on our phones, it usually has more updates and features than CleanRom VZW SE because CR VZW SE is the Verizon stock rom with very little added. All CleanRom roms have bloatware removed.
You also need to flash the latest radio along with your new rom if you want the newest radio that came with the VRAMC3 update, the radio will be the VRAMC3 one.
Radios:
http://forum.xda-developers.com/showthread.php?t=2108510
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
SAVJR said:
Thank you - Can the ROM be flashed from a SD Card or does it have to be on the internal card. ?
Click to expand...
Click to collapse
Either or. Just navigate to the folder that it's in.
Sent from my SCH-I605 using xda app-developers app
SAVJR said:
Thank you - Can the ROM be flashed from a SD Card or does it have to be on the internal card. ?
Click to expand...
Click to collapse
I generally move mine to my external SD because I like to wipe the entire internal memory when flashing to a competent different rom to get rid of all the filets and miscellaneous crap that I let accumulate so it'll be like a freshI new phone.
Then again I have a 64 GB micro SD card and keep several different releases of each rom I use along with all the recovery flashable kernels, radios, GAPPs, current version of TWRP and CWM, a couple previous releases of TWRP and CWM, miscellaneous mods, and various other flashable stuff.
Really its all up to you though. I like to keeo everything perfectly arranged in its own folder in my external and leave the internal for apps, if you want evening on your internal you can do that too!
Just remember if you choose to wipe your internal memory before flagging like I do then itll delete EVERYTHING on your internal SD card so you'll need to back up your media (pictures, videos, and music) because itll be deleted. You don't have to wipe your internal memory and it won't hurt anything if you choose to wipe it or if your choose not to hurt anything, it's completely up to you!
Sent from my SCH-I605 using XDA Premium HD app
Thank you
Thank you, you have been a great help. I was able to flash Scotts Rom CleanRomAce last night and worked without a hitch. I assume, from what I have read, that I can flash any Rom or updated Rom over this, when the time comes. Just curious, which one do you favor.
Thank you Again for taking the time to help me.
shangrila500 said:
I generally move mine to my external SD because I like to wipe the entire internal memory when flashing to a competent different rom to get rid of all the filets and miscellaneous crap that I let accumulate so it'll be like a freshI new phone.
Then again I have a 64 GB micro SD card and keep several different releases of each rom I use along with all the recovery flashable kernels, radios, GAPPs, current version of TWRP and CWM, a couple previous releases of TWRP and CWM, miscellaneous mods, and various other flashable stuff.
Really its all up to you though. I like to keeo everything perfectly arranged in its own folder in my external and leave the internal for apps, if you want evening on your internal you can do that too!
Just remember if you choose to wipe your internal memory before flagging like I do then itll delete EVERYTHING on your internal SD card so you'll need to back up your media (pictures, videos, and music) because itll be deleted. You don't have to wipe your internal memory and it won't hurt anything if you choose to wipe it or if your choose not to hurt anything, it's completely up to you!
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
SAVJR said:
Thank you, you have been a great help. I was able to flash Scotts Rom CleanRomAce last night and worked without a hitch. I assume, from what I have read, that I can flash any Rom or updated Rom over this, when the time comes. Just curious, which one do you favor.
Thank you Again for taking the time to help me.
Click to expand...
Click to collapse
When an updated version of Cleanrom comes out you can dirty flash over the current version you are running, however I ALWAYS clean flash Cleanrom because usually the only reason Scott updates it is to fix an issue, rarely because there aren't many, and when a new version comes out. When a new version comes out I like to clean flash, and its recommended to clean flash BTW, because dirty flashing can lead to all kinds of bugs. As for AOSP it is generally recommended to clean flash because it is more lrone to bugs because its constantly updated. Whenever you flash a different rom though, like from Cleanrom to Beans or CR to anything else, you ALWAYS clean flash it.
Just in case you dont know what a clean flash and a dirty flash are:
Clean is when you do the wipes explained in the OP of every rom thread.
Dirty is when you flash a rom over your current one without wiping anything.
if I am going to use TW I am going to use Cleanrom, its just a personal preference. Some people love Beans because it is modded to look like AOSP, personally I would rather run AOSP. As for AOSP I prefer ParanoidAndroid (aka PA or AOSPA) and Vanilla RootBox (aka VRB or RB). I prefer VRB more than PA lately though because for me it seems more stable at the current time, when HALO is finally released for PA I will most definitely test it out and may switch back until VRB kangs it. Really you should run any that tickle your fancy out and see what you think of them before deciding on just one.
Sent from my SCH-I605 using XDA Premium HD app
Okay - Maybe you can help me one more time...So I dirty flashed over CleanRom ACE to try Beans17. I didn't like it and flashed back to ACE. Everything was working fine until I realized ACE doesn't support Verizon Visual VM. No real big deal, but I use it regularly. So II was going to flash to CLeanRom SE and when I went to do so, I soft bricked my phone (Triangle of Death). I read through the threads and read Adams post to flash back to stock using Odin (downloaded the correct pit file and tar, but Odin will not recognize the device. I tried new cables, ports and installed the latest Samsung USB drivers. Am I stuck taking it to Verizon?
shangrila500 said:
When an updated version of Cleanrom comes out you can dirty flash over the current version you are running, however I ALWAYS clean flash Cleanrom because usually the only reason Scott updates it is to fix an issue, rarely because there aren't many, and when a new version comes out. When a new version comes out I like to clean flash, and its recommended to clean flash BTW, because dirty flashing can lead to all kinds of bugs. As for AOSP it is generally recommended to clean flash because it is more lrone to bugs because its constantly updated. Whenever you flash a different rom though, like from Cleanrom to Beans or CR to anything else, you ALWAYS clean flash it.
Just in case you dont know what a clean flash and a dirty flash are:
Clean is when you do the wipes explained in the OP of every rom thread.
Dirty is when you flash a rom over your current one without wiping anything.
if I am going to use TW I am going to use Cleanrom, its just a personal preference. Some people love Beans because it is modded to look like AOSP, personally I would rather run AOSP. As for AOSP I prefer ParanoidAndroid (aka PA or AOSPA) and Vanilla RootBox (aka VRB or RB). I prefer VRB more than PA lately though because for me it seems more stable at the current time, when HALO is finally released for PA I will most definitely test it out and may switch back until VRB kangs it. Really you should run any that tickle your fancy out and see what you think of them before deciding on just one.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
SAVJR said:
Okay - Maybe you can help me one more time...So I dirty flashed over CleanRom ACE to try Beans17. I didn't like it and flashed back to ACE. Everything was working fine until I realized ACE doesn't support Verizon Visual VM. No real big deal, but I use it regularly. So II was going to flash to CLeanRom SE and when I went to do so, I soft bricked my phone (Triangle of Death). I read through the threads and read Adams post to flash back to stock using Odin (downloaded the correct pit file and tar, but Odin will not recognize the device. I tried new cables, ports and installed the latest Samsung USB drivers. Am I stuck taking it to Verizon?
Click to expand...
Click to collapse
Not yet you aren't, you don't take it to them until its a last resort. this is just a driver issue.
Thats also why I said you needed to clean flash different roms, if you were updating from Cleanrom ACE 4.9 for 5.0 a dirty flash would be acceptable but if you experienced bugs you would have had to go back and clean flash before you could report those bugs and get help from the guys in the CR thread. When flashing completely different roms you ALWAYS clean flash.
Did you put the phone in download mode before connecting to Odin? What OS is your computer on? Do you have both the drivers from droidstyles guide and Kies installed?
I will help you with the driver issue as much as i can but you should really really really create a new thread in the Q&A section about this so it will get more views and maybe Hopesrequiem, droidstyle, and some of the other members who trouble shoot the driver issues can help. You should title it something like Odin driver issue with a soft brick, they'll need to know what OS youre using, what version of Odin you're using, and a lot of other stuff. Before you do that though I have a thread I am going to link in my next post here and I want you to read it and do what it says.
Sent from my SCH-I605 using XDA Premium HD app
---------- Post added at 09:30 AM ---------- Previous post was at 09:26 AM ----------
Here is the link I said I would post, read the OP and do what he did and see if that fixes your issue with Odin not seeing your phone.
http://forum.xda-developers.com/showthread.php?t=2304481
Also remember when youre using Odin to put your phone into Download Mode and to launch Odin before you plug your phone in.
Sent from my SCH-I605 using XDA Premium HD app
I recently picked up a GP 4.2. I immediately got it rooted so now I'm running a 2.3.6 stock rom with root. What's the next step in terms of getting a recovery installed and maybe moving up to an ICS or JB rom? I've kind of poked around a bit but it's some what confusing with all the other types of GPs in the same area. Does anybody have a recovery and rom they'd recommend? Is using rom manager to push CWM feasible?
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
MetaMav said:
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
Click to expand...
Click to collapse
Thank you for the info Meta. I'm somewhere around the mid-high mid level with flashing and rooting but slogging through trying to find the right info for a GP 4.2 was getting a bit hectic. I think part of it was the way some people abbreviate the model compared to others. I just wanted to make sure I didn't brick the device.
I got it mainly for a perm, in-car music and GPS/navigation provider instead of always looking to my phone to do it. One thing I noticed about the rom, it mentions installing it via CWM. If I don't have CWM yet, can this rom get pushed by odin or do I have to get CWM first and then flash the rom?
NapalmDawn said:
Thank you for the info Meta. I'm somewhere around the mid-high mid level with flashing and rooting but slogging through trying to find the right info for a GP 4.2 was getting a bit hectic. I think part of it was the way some people abbreviate the model compared to others. I just wanted to make sure I didn't brick the device.
I got it mainly for a perm, in-car music and GPS/navigation provider instead of always looking to my phone to do it. One thing I noticed about the rom, it mentions installing it via CWM. If I don't have CWM yet, can this rom get pushed by odin or do I have to get CWM first and then flash the rom?
Click to expand...
Click to collapse
you should flash CWM via odin first and then flash the ROM via CWM
Would the instructions here be the right thing to do?
http://www.youtube.com/watch?v=-MbHDbjph8A
MetaMav said:
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
Click to expand...
Click to collapse
Do you know if CM will come to the 3.6 as well? And from what I understand, to get CWM on the 3.6 you have to flash a custom kernel?
NapalmDawn said:
Would the instructions here be the right thing to do?
http://www.youtube.com/watch?v=-MbHDbjph8A
Click to expand...
Click to collapse
Yes. Those instructions are correct. However, you do not need to run the adb dev tool like the person does in the beginning of video in order to boot into download mode. You can just hold the power, home, and down-volume button to boot the phone into download mode before using Odin. Zaclimon's CWM kernel can be found here (along with the wifi fix): http://forum.xda-developers.com/showthread.php?t=2198444 and installed with the instructions in the youtube video.
Xenphor said:
Do you know if CM will come to the 3.6 as well? And from what I understand, to get CWM on the 3.6 you have to flash a custom kernel?
Click to expand...
Click to collapse
From what I have read I know that SerkTheTurk is currently compiling CM for the 4.2. I would imagine either him or some other 3.6 dev will take up the task of CM for your device. And, the answer to your second question is yes, you do have to flash a custom kernel similar to how the 4.2 requires a custom kernel.
Hope that helps.
MetaMav said:
Yes. Those instructions are correct. However, you do not need to run the adb dev tool like the person does in the beginning of video in order to boot into download mode. You can just hold the power, home, and down-volume button to boot the phone into download mode before using Odin. Zaclimon's CWM kernel can be found here (along with the wifi fix): http://forum.xda-developers.com/showthread.php?t=2198444 and installed with the instructions in the youtube video.
From what I have read I know that SerkTheTurk is currently compiling CM for the 4.2. I would imagine either him or some other 3.6 dev will take up the task of CM for your device. And, the answer to your second question is yes, you do have to flash a custom kernel similar to how the 4.2 requires a custom kernel.
Hope that helps.
Click to expand...
Click to collapse
Ok thanks. I also have a question regarding flashing kernels. In the linux world (and other os world), randomly changing your kernel is a big no no that would lead to major compatibility issues. I don't understand how people can mix and match kernels, roms, firmware, bootloaders, recoveries and everything else? There won't be conflicts?
Regarding the kernel available for the 3.6: what do I do if I encounter stability issues with it and, say, the upcoming CM7? I wouldn't be able to go back to my original kernel because I didn't have CWM to back it up in the first place. Won't I be stuck with a potentially faulty kernel?
Xenphor said:
Ok thanks. I also have a question regarding flashing kernels. In the linux world (and other os world), randomly changing your kernel is a big no no that would lead to major compatibility issues. I don't understand how people can mix and match kernels, roms, firmware, bootloaders, recoveries and everything else? There won't be conflicts?
Regarding the kernel available for the 3.6: what do I do if I encounter stability issues with it and, say, the upcoming CM7? I wouldn't be able to go back to my original kernel because I didn't have CWM to back it up in the first place. Won't I be stuck with a potentially faulty kernel?
Click to expand...
Click to collapse
In changing kernels in the android world, you have mixed results. There are times a kernel can cause some issues but for the most part (we're talking like 98%), if an XDA dev posts a kernel and lets you know you can use it, you can trust it. These devs no matter the device spend painstaking hours ironing things out. Also, many of them have a select group of people testing the kernel for faults and issues. In a very active community, if a well known dev posts a kernel, you can trust it. HOWEVER...no matter what we think or believe or what we're told, every device is a unique and beautiful snowflake. Back up back up back up BACK UP BACK UP BACK UP your stuff. If you want to be super ULTRA safe, take the back up and download it to your PC or somewhere safe.
NapalmDawn said:
In changing kernels in the android world, you have mixed results. There are times a kernel can cause some issues but for the most part (we're talking like 98%), if an XDA dev posts a kernel and lets you know you can use it, you can trust it. These devs no matter the device spend painstaking hours ironing things out. Also, many of them have a select group of people testing the kernel for faults and issues. In a very active community, if a well known dev posts a kernel, you can trust it. HOWEVER...no matter what we think or believe or what we're told, every device is a unique and beautiful snowflake. Back up back up back up BACK UP BACK UP BACK UP your stuff. If you want to be super ULTRA safe, take the back up and download it to your PC or somewhere safe.
Click to expand...
Click to collapse
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Xenphor said:
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Click to expand...
Click to collapse
Just flash the cwm kernel because its basically the stock kernel but with cwm, and it shouldnt brick but if it does you can flash the stock kernel back again
Sent from my YP-GI1 using Tapatalk 2
SerkTheTurk said:
Just flash the cwm kernel because its basically the stock kernel but with cwm, and it shouldnt brick but if it does you can flash the stock kernel back again
Sent from my YP-GI1 using Tapatalk 2
Click to expand...
Click to collapse
Where could I find a stock kernel?
Xenphor said:
Where could I find a stock kernel?
Click to expand...
Click to collapse
US version: http://forum.xda-developers.com/showthread.php?t=1885374
International: http://forum.xda-developers.com/showthread.php?t=1884071
Sent from my YP-GI1 using Tapatalk 2
SerkTheTurk said:
US version: http://forum.xda-developers.com/showthread.php?t=1885374
International: http://forum.xda-developers.com/showthread.php?t=1884071
Sent from my YP-GI1 using Tapatalk 2
Click to expand...
Click to collapse
Ok thank you. However, will this work with YP-GS1?
But about kernels, on the webpage where I downloaded the stock rooted rom http://tau.shadowchild.nl/attn1/?p=166 it says specifically that the Wifi module in system and kernel must MATCH. This is what I'm talking about in regards to kernel compatibility with roms. How do I know if a kernel I'm downloading will have changes applied to it that will work with another rom like with this stock rom/kernel?
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
NapalmDawn said:
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
Click to expand...
Click to collapse
Well I had to flash this kernel http://forum.xda-developers.com/showthread.php?t=2198234 to get CWM on mine. I haven't actually flashed anything with CWM because there doesn't seem to be any good roms for the 3.6 unless CM7 comes out sometime. I used Odin to flash a stock rom from here http://tau.shadowchild.nl/attn1/?p=166
NapalmDawn said:
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
Click to expand...
Click to collapse
Poop. I think I bootloped the sucker. I can use Odin to reflash the stock, rooted rom just like I did when I got it first rooted right? Do we have another rom for the 4.2 I could try flashing? Not sure why it has bootlooped. I even went back into CWM, did a factory reset, flashed only the rom (no addons) and same thing. Possible bad download? It is flashing from the internal SD as my CWM is not seeing my external SD.
NapalmDawn said:
Poop. I think I bootloped the sucker. I can use Odin to reflash the stock, rooted rom just like I did when I got it first rooted right? Do we have another rom for the 4.2 I could try flashing? Not sure why it has bootlooped. I even went back into CWM, did a factory reset, flashed only the rom (no addons) and same thing. Possible bad download? It is flashing from the internal SD as my CWM is not seeing my external SD.
Click to expand...
Click to collapse
I have been meaning to post this on the dev thread for awhile. I thought this problem might only be for certain people but I think it applies to US and maybe non-EU devices. I believe that the ChaOS ROM will bootloop on US (YP-GI1/XAA) devices if you do not install ChaOS's Enhanced Stock ROM (http://forum.xda-developers.com/showthread.php?t=2279450) for whatever reason. I spent days trying to install his ROM and bootlooping.
The way I successfully installed (if I remember correctly):
-Do a factory reset of rooted stock ROM
-Boot to CWM (meaning you have already flashed the custom kernel) and install ChaOS's Enhanced Stock (put all install files on internal SD)
-Boot to CWM, wipe davlick cache under "advanced", wipe cache partition, and install the ChaOS ROM
-Wait a little while and your device should boot up properly
I hope this works for you. If it doesn't let me know and I can help you further. If this does work for you too then I will post this on the ROM's thread for other users.
Xenphor said:
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Click to expand...
Click to collapse
SerkTheTurk said it very well, you do not need to worry, but if you also want to do a backup before you install the custom kernel you could use the adb tools on the computer to backup the device. I'm sure you could learn how to do that with a quick Google search.
MetaMav said:
I have been meaning to post this on the dev thread for awhile. I thought this problem might only be for certain people but I think it applies to US and maybe non-EU devices. I believe that the ChaOS ROM will bootloop on US (YP-GI1/XAA) devices if you do not install ChaOS's Enhanced Stock ROM (http://forum.xda-developers.com/showthread.php?t=2279450) for whatever reason. I spent days trying to install his ROM and bootlooping.
The way I successfully installed (if I remember correctly):
-Do a factory reset of rooted stock ROM
-Boot to CWM (meaning you have already flashed the custom kernel) and install ChaOS's Enhanced Stock (put all install files on internal SD)
-Boot to CWM, wipe davlick cache under "advanced", wipe cache partition, and install the ChaOS ROM
-Wait a little while and your device should boot up properly
I hope this works for you. If it doesn't let me know and I can help you further. If this does work for you too then I will post this on the ROM's thread for other users.
SerkTheTurk said it very well, you do not need to worry, but if you also want to do a backup before you install the custom kernel you could use the adb tools on the computer to backup the device. I'm sure you could learn how to do that with a quick Google search.
Click to expand...
Click to collapse
ell there's not really much point in backing up the kernel when I've already downloaded it on my computer.
I've since flashed KingOS rom and don't really notice any differences at besides a few color changes... what's all the hype about?
Xenphor said:
ell there's not really much point in backing up the kernel when I've already downloaded it on my computer.
I've since flashed KingOS rom and don't really notice any differences at besides a few color changes... what's all the hype about?
Click to expand...
Click to collapse
Xen-it seems GPlayer development is still fairly newish. the work you see from devs now are all ground work. For the 4.2 and 3.6, they seem a little less dev populated than the 4 and 5. People will build upon the work of early devs and eventually get kernels that can OC and maybe ICS and JB roms. At this stage, we likely won't see anything like ZOMG earth shattering until people spend time with the devices. Seems Serk is on his way to doing the best he can for 4.2 but I am not sure who is tackling 3.6
It's weird how roms for devices go. I learned this when I had a tbolt and shockingly saw a FUNCTIONAL JB rom for my old Eris while the tbolt was still hanging back in ginger land with not even a really good ICS rom let alone JB. I asked the Tbolt community-why? How is it the dinosaur Eris has JB and not us? It all depends on what the devs can do with the sources provided. Sometimes certain hardware points are sticky. you can have beautiful JB rom for a device that can't talk to the camera if the hardware source isn't made available (reference the HP TP for many years)
For now, flash what you're comfortable with and and learn what you do and don't like. Also learn if you want to play things safe and not experiment or take on potentially beta builds. For the tbolt, tackling an ICS rom was too dicey so I never did. On my new Rezound, I eat up JB roms as they are in much better shape
Hey guys! I'm using a Galaxy Note with a Bell board (was originally AT&T but that bricked because at the time I thought flashing an N7000 ROM would work, D'oh!) and I want to upgrade to a Jelly Bean Rom. I'm using Blackstar XI, a 4.0.4 ROM, and I'm looking for a lightweight JB rom. It can lack stylus/pen support, I found myself not using that feature as much as I thought I would.
Would I run into any issues using a QuincyATT Cyanogenmod 10.1.3 ROM, considering it's a Bell note board? Would I need to unlock my SIM first? And I recall there being a trick with Notepad++ I needed to do in order to make it work, even on my AT&T board.
I just have an issue with heavy RAM usage at boot and I can't even run some apps, since I know touchwiz is stupid.
Anyone willing to help me get it running on my note? Any help would be appreciated!
MoronDroid said:
Hey guys! I'm using a Galaxy Note with a Bell board (was originally AT&T but that bricked because at the time I thought flashing an N7000 ROM would work, D'oh!) and I want to upgrade to a Jelly Bean Rom. I'm using Blackstar XI, a 4.0.4 ROM, and I'm looking for a lightweight JB rom. It can lack stylus/pen support, I found myself not using that feature as much as I thought I would.
Would I run into any issues using a QuincyATT Cyanogenmod 10.1.3 ROM, considering it's a Bell note board? Would I need to unlock my SIM first? And I recall there being a trick with Notepad++ I needed to do in order to make it work, even on my AT&T board.
I just have an issue with heavy RAM usage at boot and I can't even run some apps, since I know touchwiz is stupid.
Anyone willing to help me get it running on my note? Any help would be appreciated!
Click to expand...
Click to collapse
If you like blackstar, I would just flash Blackstar Blackjelly after doing a backup. It's what I've been running as my go-to on my Telus note. The other jb's are great too, but cm comes with the odd small bug like echo on speaker phone. Most of the customizations make them worth trying though.
Sent from my SAMSUNG-SGH-I717
Sweet. I could give that a try if the Cyanogenmod ROM doesn't work. Is there anything I need to do in preparation, since this is technically a Bell note? Or can I just go ahead and flash the ROM without any changes to the ZIP?
MoronDroid said:
Sweet. I could give that a try if the Cyanogenmod ROM doesn't work. Is there anything I need to do in preparation, since this is technically a Bell note? Or can I just go ahead and flash the ROM without any changes to the ZIP?
Click to expand...
Click to collapse
I'm assuming you have an unlocked bootloader already since you are running cm. Just be sure to have latest cm recovery or gimmeitorilltell's twrp (although other versions work with Jellybean, if you try kitkat or lollipop you'll have problems). Make sure you are flashing a quincyatt rom.
I have been using SGH-I717ATT-UCMD3-Modem with great success for a radio. Your mileage may vary.
If you get no signal, before blaming the rom, first check your mobile networks access point names and settings to be sure they match your carrier. (A good idea is to take a couple screenshots of your settings now before you flash any new roms as there are quite a few numbers involved)
Sent from my SAMSUNG-SGH-I717
Good news! I tried the CM10.1.3 ROM and it worked well minus two small gripes:
1. Occasional freeze/hang on lock screen, causing it to reboot
2. Random artifacting/crashes during video playback/browsing through gallery
I'm gonna say this is the best performing ROM I've tried so far, but I'm going to give BlackJelly a try! I'll keep you posted. Just figured I'd give Cyanogenmod a proper shot now that I know how to install ROMs!
developweb said:
I'm assuming you have an unlocked bootloader already since you are running cm. Just be sure to have latest cm recovery or gimmeitorilltell's twrp (although other versions work with Jellybean, if you try kitkat or lollipop you'll have problems). Make sure you are flashing a quincyatt rom.
I have been using SGH-I717ATT-UCMD3-Modem with great success for a radio. Your mileage may vary.
If you get no signal, before blaming the rom, first check your mobile networks access point names and settings to be sure they match your carrier. (A good idea is to take a couple screenshots of your settings now before you flash any new roms as there are quite a few numbers involved)
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Time for BlackJelly! Downloading now.
I also may need some help getting the SIM to work once this ROM is on. So that way, I can use this stock-rom based OS for actual phone things instead of it just being a tiny tablet! Yay!
Can you point me in the direction of the latest TWRP recovery that I can flash through Odin?
MoronDroid said:
Time for BlackJelly! Downloading now.
I also may need some help getting the SIM to work once this ROM is on. So that way, I can use this stock-rom based OS for actual phone things instead of it just being a tiny tablet! Yay!
Can you point me in the direction of the latest TWRP recovery that I can flash through Odin?
Click to expand...
Click to collapse
I'm not sure about Odin, but I flashed the latest TWRP to my device using Rashr from Google Play store.
Other install methods are described here:
https://twrp.me/devices/samsunggalaxynote1att.html
Sent from my SAMSUNG-SGH-I717
developweb said:
I'm not sure about Odin, but I flashed the latest TWRP to my device using Rashr from Google Play store.
Other install methods are described here:
https://twrp.me/devices/samsunggalaxynote1att.html
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Upgrading my recovery now, yay! I also have the Phase kernel because I've heard a lot of good things about it.
MoronDroid said:
Upgrading my recovery now, yay! I also have the Phase kernel because I've heard a lot of good things about it.
Click to expand...
Click to collapse
Backup, backup, backup. If TWRP successfully installs then backup. If something goes wrong you can revert everything or just the boot partition. (Kernel)
Sent from my SAMSUNG-SGH-I717