this is my 2nd post in xda............
yesterday i post about my super bricked phone................
no one is helping me............
i flashed wrong rom to my micromax s26..............
now my phone status is.....
1. when i connect the usb to my computer it is not recognizing like new hardware is connected..........{no notification coming on the pc screen.............
2. that when i connect charger to my phone boot logo is coming and it does not going... the only way to off it is removing the battery..............
3. when i try to boot in to fastboot the boot logo only comes.............
4. when i try to switch on phone vibrates and stuckzzzzzzzz at boot logo...
plzzzzzzzzzzzzzzzzzzzzz anybody reply if once i get new hardware is connected on my pc screen i know what to do after that.....................
so plzzzzzzzzzzzzzzzzzzz anybody reply..................
if recognizing not possible plzzzzzzzzzzzz tell me warenty will be applicable for it.................
noooooooooooooooooooooooo reply.........................
plzzzzzzzzzzzzzzzz anybody solve my problem..........................
i just want to new hard ware recognized on my pc........................
Related
Hello friends,am in serious need of help,i plug in my ace to my computer using the cable and kies detected a new firmware which i tried to update to,after downloading finish to 100%,my phone restarted and shows downloading on the screen,for like 1hr it didnt change to any other thing and kies couldnt detect the phone,so i disconnected it from the cable,i removed the battery and inserted it again,now the phone can start up but all i can see on the screen is a computer icon with a phone icon,i dont know what to do,pls help...anybody with useful information or solution should post it here thanks.l
Remove then insert battery. Then try holding volume down and home button while holding power button. Will it go to download mode? If yes, read hubix's tutorial in the development subforum it's a sticky thread.
praisegod1 said:
Hello friends,am in serious need of help,i plug in my ace to my computer using the cable and kies detected a new firmware which i tried to update to,after downloading finish to 100%,my phone restarted and shows downloading on the screen,for like 1hr it didnt change to any other thing and kies couldnt detect the phone,so i disconnected it from the cable,i removed the battery and inserted it again,now the phone can start up but all i can see on the screen is a computer icon with a phone icon,i dont know what to do,pls help...anybody with useful information or solution should post it here thanks.l
Click to expand...
Click to collapse
Next time , use ODIN for flashing firmware . Kies was NEVER EVER reliable .
go to recovery mode perform a factory reset/data wipe that should fix it
Please use ODIN and flash with the one-package file from samfirmware. I did the same when Kies bricked my phone too while upgrading to Gingerbread. It works!
er.davinder said:
go to recovery mode perform a factory reset/data wipe that should fix it
Click to expand...
Click to collapse
Nope, there is no recovery mode accessible either when Kies bricks your phone. Happened to me so. Just a stupid screen with a computer and phone icon with <!> in between them. But anyway my suggestion above of using ODIN should help him out. =)
I am just sharing my experience and hope it helps.
DISCLAIMER: I am not responsible for bricking any phone and/or pc. I am not responsible for any phone or pc damage done by my message here. You are responsible for your own pc and phone. You are responsible for taking risk of upgrading your phone or pc. I just shared my experience in hope if it helps someone.
I had bricked my phone once where I could just see black screen and after some tries white screen and nothing. I removed SD Card and SIM Card and kept it aside. I then removed battery and tried putting phone in download mode. It still did not work then I waited 4-5 min and then inserted battery again. Then I tried putting phone in download mode and it successfully gone in download mode. Then my phone was not getting recognized thru USB cable for ODIN. I changed USB port still same issue then restarted my PC and then I connected phone to USB port and finally got Froyo installed again on my Galaxy Ace thru ODIN.
My phone is bricked
i had samsung galaxy ace gt-s5830 i've rooted my phone and install the super one click to unlock my phone when i restarted the phone its just wont boot the screen goes black and white but i can still access to my download mode i tried to install a new frimware to bring it back to life using odin but is till have the same problem please help and when i flash it using odin it gave me the blue screen that the phone flash pass but it just not booting all what give the screen goes white and black thats it can anyone help me pleasde and i woulf be so thanfulllll please help
buisness_life said:
i had samsung galaxy ace gt-s5830 i've rooted my phone and install the super one click to unlock my phone when i restarted the phone its just wont boot the screen goes black and white but i can still access to my download mode i tried to install a new frimware to bring it back to life using odin but is till have the same problem please help and when i flash it using odin it gave me the blue screen that the phone flash pass but it just not booting all what give the screen goes white and black thats it can anyone help me pleasde and i woulf be so thanfulllll please help
Click to expand...
Click to collapse
Is it stuck at the Galaxy Ace sign or the boot animation ?
Sent from my MSM7227 with Adreno 200 using XDA App
EmoBoiix3 said:
Is it stuck at the Galaxy Ace sign or the boot animation ?
Sent from my MSM7227 with Adreno 200 using XDA App
Click to expand...
Click to collapse
boot animation
Hello there i need some help this is what happened.
I had this phone with purple screen so i download the room and flash it tru the sd card with the method of the buttoms (voluime up+ volumne - and power) the phone start doing the proces finish but never boot up it stay on a black screen.
After a while checking what when wrong i find out that i flashed a wrong firmware i used y210-0100 when i had to use y210-0151, so i download the new sofware and tried again but this time the phone does not go in to the flash mode wiith the botom (or any other mode)at least does not show nothing on the screen.
Right now the phone vibrates when i turn it on but does not show nothing on the screen only a black screen adb system in the computer recognize the phone but only when i conected in recovery mode (but nothing shows in the screen).
I have tried to flash it again with adb but nothing has work yet even thought to flash it tru the sdcard with adb but nohting has work yet, actually i am not an expert with the adb thing maybe you can recomend some comands that may work.
When i trien comands like "fasrboot -w" adb says waitng for device and get stuck there forever also with "fasboot flash file" or something likes that
So i will like to know if some one has any suggestion please let me know it may help me to fix this problem.
Y210-0100 Black Screen
Same thing happen to me after upgrading. HELP!!!
Hi There, I have a problem that i hope you guys can help me.
Today i was restarting my Phone and by my mistake it fell on the ground and the battery fell out, After this it doesn't even vibrate to start up, I can't perform Hard Reset, Neither go on download mode, I tried to pull it to the PC via USB and it detects it for 1 sec and then it appears as Unknown Device and i can't do anything, TO flash back the rom.
Well i hope any of you can help me, If you need any more information just say, Thanks in Advance.
- Bruno
Edit: I must say that if you plug the phone to the PC it detects but saying Unknown Device and saying that there is no drivers for it, I am unable to Get to download mode or hard reset, Help pls.
I may add that, I need help as soon as posible since i need the phone to work i hope you guys can help me, If you need i can send a video of how it is happening
Problem too
I have a lg L5 II E450F and all screen is black dont display anything I tried with pressing both buttons I searched a lot and the unique solution I tried is pressing the two buttons of volume and connect but in lg support tool told me that all is fine and flashing correctly but my screen don't display or the phone dont vibrate or sound nothing please help me too. I think is something in the display data because I make a back up with piranha box and it works but nothing display or show something or made something still dead please help
BrunoGanzuas said:
Hi There, I have a problem that i hope you guys can help me.
Today i was restarting my Phone and by my mistake it fell on the ground and the battery fell out, After this it doesn't even vibrate to start up, I can't perform Hard Reset, Neither go on download mode, I tried to pull it to the PC via USB and it detects it for 1 sec and then it appears as Unknown Device and i can't do anything, TO flash back the rom.
Well i hope any of you can help me, If you need any more information just say, Thanks in Advance.
- Bruno
Edit: I must say that if you plug the phone to the PC it detects but saying Unknown Device and saying that there is no drivers for it, I am unable to Get to download mode or hard reset, Help pls.
Click to expand...
Click to collapse
lgflashtool
and vcom mtk drivers
get them
select flash files
plug phone first time to setup driver then next time if lgflashtool ready to flash it will attach itself to pc using preloader
Hi all,this might be a old problem but hoping for solution.Moto E stuck in bootloop (I think so), Black screen.Whenever I connect to PC,sound of disconnecting and reconnecting is coming.Can't enter recovery or fastboot mode.Nothing happens on holding combination keys for 2minutes also.Whenever I connect led light blinks and goes off.Charged battery by connecting it to another moto e,so it's not battery fault.Developer options aren't enabled,as the person who gave this to me is noob. Is there anything I should try ?? Any hope for recovery except motherboard replacement ?
krishna2k9 said:
Hi all,this might be a old problem but hoping for solution.Moto E stuck in bootloop (I think so), Black screen.Whenever I connect to PC,sound of disconnecting and reconnecting is coming.Can't enter recovery or fastboot mode.Nothing happens on holding combination keys for 2minutes also.Whenever I connect led light blinks and goes off.Charged battery by connecting it to another moto e,so it's not battery fault.Developer options aren't enabled,as the person who gave this to me is noob. Is there anything I should try ?? Any hope for recovery except motherboard replacement ?
Click to expand...
Click to collapse
Same here bro
Just reflash my phone with 5.1 lollipop as my phone is stuck in fastboot mode but even after sucessfull flashing the device is not booting only detecting as qploader 9008 in device manager
Hi there, I'm using Otus the 3g version, I recently got it but is a used phone, there was a popup for official update and when I updated it, it installed from recovery, and turned off after that it never turned on, nothing happens when i connect phone with charger, I cannot go to fastboot or recovery, sometimes when i connect to pc it goes to EDL mode (I can see the device in device manager ) is there a fix for this ?
Sometimes when I connect charger there is a light yellow/white LED flashing for sometime and then the phone dies
Please help me!!
thanks:crying:
More info : phone 's bootloader is locked and its not rooted
I think you may have hardbricked your device just like mine. The white LED flashing is because of no battery. I had the same issue in August. Unfortunately there is no possible fix for a hard brick. Myself and some other Members of the Moto E 2015 community have tried coming with a solution but in vain.
balajithegreat said:
Hi there, I'm using Otus the 3g version, I recently got it but is a used phone, there was a popup for official update and when I updated it, it installed from recovery, and turned off after that it never turned on, nothing happens when i connect phone with charger, I cannot go to fastboot or recovery, sometimes when i connect to pc it goes to EDL mode (I can see the device in device manager ) is there a fix for this ?
Sometimes when I connect charger there is a light yellow/white LED flashing for sometime and then the phone dies
Please help me!!
thanks:crying:
More info : phone 's bootloader is locked and its not rooted
Click to expand...
Click to collapse
i will be helping you guys
go to this thread
https://forum.xda-developers.com/moto-e-2015/help/loader-img-to-unbrick-moto-e-otus-t3709769