Hello,
I hope someone can help me urgently.
I've HTC AMAZE 4G , I do not know its bricked or no
Currently showing HTC logo with black background and 4 Triangle in corners. ( Image attached )
I just tried to root mobile ( Unlocked successfully , Then tried to S-Off it NOT successful, SuperCID also successful , Recovery Update also successful )
After all, wiped all data from Recovery.
Still all is fine and bootloader and recovery will appear when i need them( when pressing Volume down and power )
I just ReLocked bootloader , then installed one of stuck roms ( can not remember exact name, i just downloaded some HTC AMAZE Stuck rom from websites , But i'm sure that rom not customized )
After that installiation, all steps passed with "OK" result. only one of them ( I think ERROR WAS: nfc not reposnded...or something like it )
Then rebooted phone.
After that! HTC logo with 4 Triangle in corners coming up.
I can not access recovery or bootloader page when pressing Volume down and power button.
I only can run fastboot commands.
For example:
C:\adb-fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.92.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOserialno: SH28SVF01437
INFOimei: 357265045498225
INFOproduct: ruby
INFOplatform: HBOOT-8260
INFOmodelid: PH8510000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4012mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: RUU
INFOcommitno-bootloader: dirty-b411d064
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.503s
I also tried to install rom via fastboot and also Android rom installer utility.
Here is result from Fastboot:
FAILED (remote: 12 signature verify fail)
I also tried to install boot.img or recovery.img or system.img and all of them same result: FAILED (remote: 12 signature verify fail)
Also tried from Android utility ( Rom installer .exe ):
Error : Invalid Model ID or etc..
Anyway, Its emergency issue and need to fix this phone.
Please help if someone have some experience with this issue.
Thanksssssssssss
I have the same problem 6 mounths ago... I think (not sure ) you must flash the boatloader.... flash boot_signed.img with the boot_signed.bat ... It works for me . Do u have them ?!
thelordofkings97 said:
I have the same problem 6 mounths ago... I think (not sure ) you must flash the boatloader.... flash boot_signed.img with the boot_signed.bat ... It works for me . Do u have them ?!
Click to expand...
Click to collapse
Hi,
Thanks for reply,
Tried it already, and tried again:
C:\adb-fastboot>fastboot flash boot boot_signed.img
sending 'boot' (3812 KB)... OKAY [ 0.809s]
writing 'boot'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 1.325s
At all receiving FAILED (remote: 12 signature verify fail) for all image or rom installiation via fastboot
Your thread is now in the HTC Amaze 4G > Amaze 4G Q&A, Help & Troubleshooting section. Here you may find people offering more help.
Please be sure to post any questions you may have in the approiate location. To find out how, please take a few moments and read THIS.
Thank you
First of all your amaze is S-on you said earlier it was s-off second flash a ruu through the boot loader
Sent from my HTC_Amaze_4G using Tapatalk
Ok now i understand your problen yor boot loader is old version you did not read the instructions right you were to flash another ph85img then your boot loader would have upgraded now you should try to flash a latest t-mobile ruu
Sent from my HTC_Amaze_4G using Tapatalk
---------- Post added at 01:07 AM ---------- Previous post was at 01:05 AM ----------
And try again if you dont understand an instruction you should searc for a video on youtube if still not understanding post a question in related thread and wait for soneone to answer but never do something opposite
Sent from my HTC_Amaze_4G using Tapatalk
your CID says ''INFOcidnum: HTC__044'' means its the amaze asian version..find the GB asian ruu and flash it you cant flash any other RUU without S-OFF
TonyStark said:
Your thread is now in the HTC Amaze 4G > Amaze 4G Q&A, Help & Troubleshooting section. Here you may find people offering more help.
Please be sure to post any questions you may have in the approiate location. To find out how, please take a few moments and read THIS.
Thank you
Click to expand...
Click to collapse
Hi,
Sorry about it, Thanks for note.
ravike14 said:
your CID says ''INFOcidnum: HTC__044'' means its the amaze asian version..find the GB asian ruu and flash it you cant flash any other RUU without S-OFF
Click to expand...
Click to collapse
Hi,
Thank you!
I'll try it and will report here.
Hello,
I just tried with ASIA ROM " RUU_Ruby_hTC_Asia_WWE_1.60.707.3_R_Radio_1.13.550L.13DC_30.69b.550L.101_release_253820_signed.exe '
Signatore Error PASSED ,installation process started.
But finally received NFC FAIL-PU Error.
Partition Update Fail.
Please check attachment images.
Let me know if you have any idea.
Thanks.
thelordofkings97 said:
I have the same problem 6 mounths ago... I think (not sure ) you must flash the boatloader.... flash boot_signed.img with the boot_signed.bat ... It works for me . Do u have them ?!
Click to expand...
Click to collapse
Hello
If you have boot and recovery image files( that files fixed the issue for you, please send them to me )
Thanks
ill try to find it
ourquestinc said:
Hello
If you have boot and recovery image files( that files fixed the issue for you, please send them to me )
Thanks
Click to expand...
Click to collapse
your file is corrupt
you see asian ruu is hard to find i have a zip file but my evo is very slow right now so cant upload and the link i have forgotten but i will search so wait.
Muneeb Saeed said:
your file is corrupt
you see asian ruu is hard to find i have a zip file but my evo is very slow right now so cant upload and the link i have forgotten but i will search so wait.
Click to expand...
Click to collapse
Hello,
I've downloaded it from: http://persianhtc.net
If you can please upload it in one of sharing websites or etc...Also let me know exact size of .exe file and exact name.
Thanks
Any idea?
the internet
ourquestinc said:
Any idea?
Click to expand...
Click to collapse
the name is same as yours but has PH85Img_ in the start and zip in the end i cand upload right now i dont have a login i might have to upload in dropbox or google drive but it will be up tonight or tommorow morning the internet in pakistan is very slow right now.
Ok im getting a 50 kb upload speed now ill upload it tonight and post the link.
Sent from my HTC_Amaze_4G using xda app-developers app
Dear Friend.
If You need Ruby all stock RUU
All here
http://www.androidruu.com/?developer=Ruby
Thanks
Sent from my HTC One XL using xda app-developers app
I checked there is no gb asian ruu i have uploaded mine on google drive ruu if hee wants it hee will msg me actually hes been gone for a day or two i sent him pms but hee didnt respond
Sent from my HTC_Amaze_4G using xda app-developers app
Hello,
Thanks for replies and sorry for the delay,
As i said, I just found right RUU from: http://persianhtc.net/index.php?dir=Amaze 4G(Ruby)/rom/original/EXE/
"RUU_Ruby_hTC_Asia_WWE_1.60.707.3_R_Radio_1.13.550L.13DC_30.69b.550L.101_release_253820_signed.exe"
Installed it, Signature Errors solved, But see attached images.
Any solution?or idea?
Give me your bootloader details.
Sent from my HTC One XL using xda app-developers app
Related
Hi!
Yesterday i managed my Flyer to S-off via revolutionary tool.
Today i wanted to update to Honeycomb with this tutorial:
+
Google search: android.modaco.com Installing Honeycomb on your Flyer
Guide from Paul.
i got now stuck after the htcdev bootloader unlock.
i should transfer the cwm recovery file via fastboot into the flyer
command: fastboot flash recovery revolutionary-cwm-4.0.1.4-flyer.newhboot.img
Code:
< waiting for device >
sending 'recovery' (4682 KB)...
OKAY [ 0.753s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.198s
Why this is failed? i tried to do the next step, getting into clockworkmod recovery but nothing happens.
My Flyer shows now:
Code:
*** RELOCKED ***
*** Security Warning ***
FLYER PUT SHIP S-ON RL
HBOOT-1.11.0006
MICROP-0950
RADIO-3821.08.00.26_M
eMMC-boot
Aug 29 2011, 13:32:02
Fastboot 9v AC (because charging)
VOL UP
VOL DOWN
POWER
Bootloader
reboot
reboot bootloader
power down
What can i do now? any idea?
edit: adb don't work, fastboot works.
I'm going crazy tried to reunlock bootloader via htcdev. When i flash the unlock token i get same error
Code:
C:\Users\h0f1\Desktop\htc\android-sdk_r15-windows\android-sdk-windows\platform-t
ools>fastboot flash untlocktoken Unlock_code.bin
sending 'untlocktoken' (0 KB)...
OKAY [ 0.015s]
writing 'untlocktoken'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.019s
Why in the world would you use the htcdev unlock? Go to flyer development and follow globatron's honeycomb guide. Much better than voiding your warranty.
Sent from my PG86100 using Tapatalk
i did yesterday exactly those steps from globatron for soff and cw recovery.
For getting Honeycomb i used another guide yesterday.. because i found this site today..
I really dont know what to do now
Worst case run ruu of your stock software
Sent from my HTC Flyer P510e using xda premium
somehow it doesnt work
C:\Users\h0f1\Desktop\htc\android-sdk_r15-windows\android-sdk-windows\platform-t
ools>fastboot flash untlocktoken Unlock_code.bin
sending 'untlocktoken' (0 KB)...
OKAY [ 0.013s]
writing 'untlocktoken'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.017s
edit:
made it now with other version of fastboot... this is crazy..
so i unlocked again and now i can go on with the other steps?!
I would return to stock then use globatrons update method. Do you know your stock ruu
Sent from my HTC Flyer P510e using xda premium
is going back to stock via ruu possible when i changed hboot, radio and boot file?
the guide from paul says:
Do NOT under any circumstances run the RUU in it’s entirety nor ‘fastboot flash rom.zip’ – this will make irreversible changes that you don’t want!
Be careful if you flash any RUUs or do anything that could revert you to S-ON on a broken system – this could leave you stuck
i think i will recharge and go through the last 4 points..
im afraid
Try to get a new unlock token.
I can not see why running your ruu to stock.would be an issue but I am not 100% certain. I did a revert last week and the only thing I needed to do prior was relock hboot first which you are already locked.
Sent from my HTC Flyer P510e using xda premium
first i wanna say thanks for your help!
i did today the last two steps after recharging the battery.
last 2 steps are putting the new image onto sdcard via adb and second step was factory reset und dalvik wipe. All two steps worked fine for me, but after restart the flyer is going to a bootloop.
what should i do now?
Should i get back with the RUU?
Can i setup honeycomb after getting back with ruu with the tutorial from globatron?
best regards
tom
did you flash the zip through recovery
Sent from my HTC Flyer P510e using xda premium
^the tutorial say get into clockwork recovery mode and type into command "adb shell mount /sdcard && adb push stock-hc-flyer-system.zip /sdcard/"
this command finished after 3 minutes and i was also lookin at the sd card the file is on the sd card.. after this i wiped dalvik and made a factory reset in the clockwork recovery mode. Afterwards Reboot -> then bootloop
lool is it possible that i have to " install zip from sdcard" ? if yes i'm the dumbest flyer user on the world *g*
edit: i tried now to install the update via recovery, it says E: Can't open /sdcard/stock-hc-flyer-system.zip (bad)
h0f1 said:
lool is it possible that i have to " install zip from sdcard" ? if yes i'm the dumbest flyer user on the world *g*
edit: i tried now to install the update via recovery, it says E: Can't open /sdcard/stock-hc-flyer-system.zip (bad)
Click to expand...
Click to collapse
Re-download, it's corrupt.
ikingblack said:
Re-download, it's corrupt.
Click to expand...
Click to collapse
+1
Sent from my HTC Flyer P510e using xda premium
really i promise i will neveer ever never try to flash/hack/root anything. its just horrible thinking all the time you brick it or anything else xD
i tried to reboot bootloader via adb in the recovery mode, flyer turned off and now nothing happens. cant go into bootloader or something else.. trying to recharge again, maybe battery is low again (i hope..)
well i will go on tomorrow evening.
great work guys anyways, thanks
tom
h0f1 said:
really i promise i will neveer ever never try to flash/hack/root anything. its just horrible thinking all the time you brick it or anything else xD
i tried to reboot bootloader via adb in the recovery mode, flyer turned off and now nothing happens. cant go into bootloader or something else.. trying to recharge again, maybe battery is low again (i hope..)
well i will go on tomorrow evening.
great work guys anyways, thanks
tom
Click to expand...
Click to collapse
I don't know if it's possible to really stop it from booting or displaying anything on the screen. Recharge and once it's done hold power button for a long time.
Good Luck
help fully bricked htc flyer p510e
here is what i did step by step:
bought an htc flyer, then upgraded it officially to honeycomb
i did not like honeycomb so i unlocked bootloader with htc dev method
then flashed recovery and rooted....
changed the misc_version and downgrade back to gingerbread with fastboot flash zip rom.zip
it worked........gta 3 and gta vice city worked.......few months later the gta 3 and vice city started crashing( just like honeycomb)
so i got s-off with revolutionary.....and flashed honeycomb PG41IMG.zip
that worked...........few months later i wanted gta back so i could not take i tried flash back down but did not work...it would get stuck in RUU mode ...so i flashed PG41IMG.zip back and that worked ..i was not bricked...so i tried another method
i flashed fastboot express downgrader.nb0 and
flyer downgrader.nb0
then changed gingerbread rom.zip to PG41IMG.zip and placed it on sd card
went into bootloader and let it flash
the bootloader at this moment:
***security warning***
pvt chip s-on
hboot 1.10.000
..................
it does not show whether the bootloader is locked or unlocked......no recovery.......tablet does not boot.....only to bootloader and fastboot.....
i tried to flash the unlock token for bootloader but get
signature failed error....
i tried to flash the honeycomb PG41IMG.zip but get
checking header failed
remote[signature failed]
cant flash anything because of that ...cant flash recover to even turn off the verification signature check.....
plz help ...whether you help me to fix it back to gb or hc to dont care ..just want it to work
plz help me fast
battery charges but phone goes into fastboot .....
plz help
just ask if u need more information on the situation..
plz anyone
Should probably find a good RUU that is compatible, create a gold card and do a clean re-load of compatible ROM.
So, i tried to do the WireTrick and it f-ed up my phone. i lost recovery + rom and can't flash anything cuz i'm on HBOOT 1.58 S-ON. (UNLOCK HTCdev).
I wanna relock it and run the Sprint RUU.exe but i'm getting the follow error;
_____________________________________________________
C:\rootevo3dnew>fastboot oem lock
...
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [PG_ERROR] htc_pg_hdr_get(114):
(bootloader) sd_read_sector error
(bootloader) [PG_ERROR] htc_pg_part_hdr_get(166):
(bootloader) htc_pg_hdr_get failed
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 134086008 (0x7FDFD78)
FAILED (status read failed (Too many links))
finished. total time: 1.014s
________________________________________________________
Is there any other way to get Lock/Relock?
MANY THX
Sorry I may be wrong and hopefully someone will correct me if I am because I cant remember for sure but since your unlocked, you could install recovery thru bootloader with PG86100.zip. Once you get recovery then you could at least get your phone will working again...
Sent from my Rooted S-OFF EVO 3D
Hit that thanks button if I helped.
scottypeterson said:
Sorry I may be wrong and hopefully someone will correct me if I am because I cant remember for sure but since your unlocked, you could install recovery thru bootloader with PG86100.zip. Once you get recovery then you could at least get your phone will working again...
Sent from my Rooted S-OFF EVO 3D
Hit that thanks button if I helped.
Click to expand...
Click to collapse
No, I can't cuz I still s-on...
Axhole said:
So, i tried to do the WireTrick and it f-ed up my phone. i lost recovery + rom and can't flash anything cuz i'm on HBOOT 1.58 S-ON. (UNLOCK HTCdev).
I wanna relock it and run the Sprint RUU.exe but i'm getting the follow error;
_____________________________________________________
C:\rootevo3dnew>fastboot oem lock
...
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [PG_ERROR] htc_pg_hdr_get(114):
(bootloader) sd_read_sector error
(bootloader) [PG_ERROR] htc_pg_part_hdr_get(166):
(bootloader) htc_pg_hdr_get failed
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 134086008 (0x7FDFD78)
FAILED (status read failed (Too many links))
finished. total time: 1.014s
________________________________________________________
Is there any other way to get Lock/Relock?
MANY THX
Click to expand...
Click to collapse
Is there some reason you can't reinstall a recovery using adb? If you boot to bootloader, I would think you could flash your recovery image using adb commands. Then you should be able to reinstall your rom. I installed my recovery with s-on this way with no issues.
Barring that, I am not sure if the wire trick works on 1.58, I did it before I allowed my hboot to upgrade, but what happens if you try it again? Do you have anything to lose?
Just boot into bootloader, enter fastboot then in fastboot connect usb cable.
In PC you can flash downloaded recovery using "fastboot flash recovery recovery_name.img" command, just make sure that recovery image is in the same dir as fastboot.exe.
Guys, come on. I can't flash/boot recovery. that's the why i wanna relock it. when i try to boot an img, i get the msg "FAILED (remote: reproduce boot image with on-flash ramdisk error)", as far as i know it's cuz the ramdisk is empty. HELP PLEASE. lol.
Helppp!!!
Damn it! Nobody? Any one? I'm phoneless...
http://forum.xda-developers.com/showthread.php?t=1677053
read this thread. there is a command that will restore the backups in the folder with the exe file.
"(bootloader) Lock successfully..."
That line is there, more likely than not you're locked successfully. Run the RUU and see what happens
Axhole said:
Damn it! Nobody? Any one? I'm phoneless...
Click to expand...
Click to collapse
U can flash a zip ruu u just need to dl a signed ruu that u were currently on and run it then extract the zip from the .exe if ur on Windows search in the start menu %temp% delete everything and if it leaves some files that's fine then run the ruu .exe then look in the newest of the 2 folders it creates then find a file in the folder with another folder in it open that folder and find rom.zip move it to desktop and rename PG86IMG.zip place on sd and boot in bootloader and press vol + and u can try the wire trick again if u want
Sent from my PG86100 using xda premium
rockerdudelive said:
http://forum.xda-developers.com/showthread.php?t=1677053
read this thread. there is a command that will restore the backups in the folder with the exe file.
Click to expand...
Click to collapse
i tried that... no good ;-/
beneath-a-burning-turtle said:
"(bootloader) Lock successfully..."
That line is there, more likely than not you're locked successfully. Run the RUU and see what happens
Click to expand...
Click to collapse
NO my friend... it's like, "ok, you got it", then next line you have "NO WAIT, you can't get it" lol. STILL a big "UNLuCKy" ;0)
kickyoace said:
U can flash a zip ruu u just need to dl a signed ruu that u were currently on and run it then extract the zip from the .exe if ur on Windows search in the start menu %temp% delete everything and if it leaves some files that's fine then run the ruu .exe then look in the newest of the 2 folders it creates then find a file in the folder with another folder in it open that folder and find rom.zip move it to desktop and rename PG86IMG.zip place on sd and boot in bootloader and press vol + and u can try the wire trick again if u want
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
i did that and it just reboot with no changes... no errors. darn it!
Axhole said:
NO my friend... it's like, "ok, you got it", then next line you have "NO WAIT, you can't get it" lol. STILL a big "UNLuCKy" ;0)
Click to expand...
Click to collapse
Trust me, I think you got it. When I had a stroke of stupidity and relocked to take ota (which you should NEVER do), it gave me that EXACT line after it said locked successfully and I was locked just fine. Ran the ruu and was back to stock
Sent from my PG86100 using xda app-developers app
I went through similar issues but never got full update to New hboot I had to reunlock my phone flash stock rooted Rom then do wire trick but as previously stated I was still on 1.5 hboot and not sure if wire trick works on 1.58
Sent from my PG86100 using xda app-developers app
I just wanna said to y'all that I really appreciate all the help. I went to a sprint store and the technician told me that my cellphone has a "hardware failure". New cellphone, end of story. Thanks y'all.
Hello,
I have tried to flash a custom ROM to my htc desire x but unfortunetly I am a almost complete noob. I have been using Desire_X_All-In-One_Kit_v2.0 in order to complete the action. The problem is that i have never rooted the fone nor i have put in the recovery into it. So basically i unlocked the bootloader and thought it would all work.Well you know yourselfs it didn't.I have been looking all over the place for a way to get my phone fixed and i found one(ima Junior member can't post links yet ( Re-flash stock ROM (RUU) after bricking a rooted device)) .I have done all the steps but in step5 i get an error
C:\rec>fastboot flash recovery recovery_signed.img
sending 'recovery' (4266 KB)...
OKAY [ 0.795s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.323s
and in step 7 i get Error 140 bootloader error during RUU
Any help here would be greatly appreciated
Regards Kuba
First of all write down all you have written in bootloader screen.
It will be easy to fix it.
nlooooo said:
First of all write down all you have written in bootloader screen.
It will be easy to fix it.
Click to expand...
Click to collapse
How do you mean? do you mean whats written when i enter the bootloader or what have I written in in the terminal ( eg. fastboot flash recovery recovery_signed.img)
Thanks a lot for your quick reply
Bootloader screen, when you enter bootloader.
Also, give me the version of RUU that you have.
nlooooo said:
Bootloader screen, when you enter bootloader.
Also, give me the version of RUU that you have.
Click to expand...
Click to collapse
*****RELOCKED********
PROTO PVT SHIP S-ON RL
HBOOT-1.24.0000
RADIO-1.10.40.23
eMMC-boot
Oct 30 2012, 20:09:09
The most recent RUU i have downloaded is RUU_PROTO_U_ICS_40A_HTC_Europe_1.14.401.1_Radio_10.18.40.05U_1.09.45.201_release_284072_signed
But i have read that FAILED <remote: signature verify fail> error that im getting is related to wrong ruu .I guess you know better
There's a newer release 1.18.401.1 there's a link in Index in my signature, try to download that one and run it with phone booted in fastboot and attached to PC. If that doesn't go will try something else.
nlooooo said:
There's a newer release 1.18.401.1 there's a link in Index in my signature, try to download that one and run it with phone booted in fastboot and attached to PC. If that doesn't go will try something else.
Click to expand...
Click to collapse
Great man!! thanks for help!! Could you just make it clear what i need in the folder with the ruu ?. its Adb.exe AdbWinAp.dll fastBoot.exe and the image file? is there anything else i would need? (as you see i know basically nothing about this)
It's not a folder its exe file, just run it from PC.
nlooooo said:
It's not a folder its exe file, just run it from PC.
Click to expand...
Click to collapse
YOUR Fuc**ng Awsome bruf everything back on track !!.....THank a lot
hlick14 said:
YOUR Fuc**ng Awsome bruf everything back on track !!.....THank a lot
Click to expand...
Click to collapse
That's why I'm here and that's what the thanks button stands for...
I purchased a EVO 4G LTE for my sister a little while back and recently she had her boyfriend attempt to root it for her, and since I'm here it obviously didn't go over all too well. All he said he did was follow a video (which he gave me) on how to root for the newer software version. "Something happened and it didn't work so I watched another video and tried that" The phone is currently unlocked with S-ON and he flashed a working version of TWRP and cm10 couldn't figure it out and here we are. help please. Rooted using Linux. i did some reading and found out i had to flash the boot.img through fastboot. it just hangs at <waiting for device> in the terminal. Apologies if this has been answered, if so please point me in the right direction.
http://forum.xda-developers.com/showthread.php?t=1917106
Scroll down to see how to replace the files with the files from the cm10 rom that he flashed to the phone.
I forgot to mention I too am running linux, i tried to open this in wine and it wont save the files to my system. i will try this at a friends house asap and report back, thanks
BusstopBill44 said:
I forgot to mention I too am running linux, i tried to open this in wine and it wont save the files to my system. i will try this at a friends house asap and report back, thanks
Click to expand...
Click to collapse
Is adb configured right?
I use Linux and when I was son I was able to flash boot.img without problems
Sent from my EVO using xda app-developers app
jesuscash said:
Is adb configured right?
I use Linux and when I was son I was able to flash boot.img without problems
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
I'm not really sure what he did or why he even tried. How can I check adb to see if that was done correctly?
tilltheend714 said:
http://forum.xda-developers.com/showthread.php?t=1917106
Scroll down to see how to replace the files with the files from the cm10 rom that he flashed to the phone.
Click to expand...
Click to collapse
Alright, we have made some progress, I went to a buddys house and flashed the boot.img using said method flashed gapps as well.Now, i have no touch function but it does boot to the homescreen, any advice?
BusstopBill44 said:
Alright, we have made some progress, I went to a buddys house and flashed the boot.img using said method flashed gapps as well.Now, i have no touch function but it does boot to the homescreen, any advice?
Click to expand...
Click to collapse
I'm guessing it's on the latest firmware (3.16)? That update breaks the touch panel on all non-3.16 roms (which would include cm)...the only way to downgrade is to flash the tp.img from the previous firmware (3.15), which requires s-off. I would recommend going that route as it makes things a lot easier. For example, once you're s-off you won't have to fastboot flash kernels anymore. Check out the dirty racun thread in Original Development for more info. If you decide to s-off, you can flash the old tp.img zip from the 3.15 firmware to get the touch panel working for cm:
http://themikmik.com/showthread.php...dio-Collection&p=220556&viewfull=1#post220556
Otherwise, if you don't want to go s-off then you'll need to flash a sense Rom that's using the 3.16 base (which I think most if not all are now). I recommend Viper4g, runs great and has tons of tweaks like cm.
Sent from my EVO LTE
BusstopBill44 said:
Alright, we have made some progress, I went to a buddys house and flashed the boot.img using said method flashed gapps as well.Now, i have no touch function but it does boot to the homescreen, any advice?
Click to expand...
Click to collapse
Boot into bootloader and check the radio. If its 1.12.11.1210 then he took the 3.16 OTA and your only choices are what premo15 said.
premo15 said:
I'm guessing it's on the latest firmware (3.16)? That update breaks the touch panel on all non-3.16 roms (which would include cm)...the only way to downgrade is to flash the tp.img from the previous firmware (3.15), which requires s-off. I would recommend going that route as it makes things a lot easier. For example, once you're s-off you won't have to fastboot flash kernels anymore. Check out the dirty racun thread in Original Development for more info. If you decide to s-off, you can flash the old tp.img zip from the 3.15 firmware to get the touch panel working for cm: (Had to remove link)
Otherwise, if you don't want to go s-off then you'll need to flash a sense Rom that's using the 3.16 base (which I think most if not all are now). I recommend Viper4g, runs great and has tons of tweaks like cm.
Sent from my EVO LTE
Click to expand...
Click to collapse
Thanks, i decided to try and go S-OFF. I flashed the correct RUU for 3.16 and I get an error message after I flash the RUU,zip
/RabiesShot_LINUX$ sudo ./fastboot flash zip RUU.zip
< waiting for device >
sending 'zip' (659905 KB)...
OKAY [ 45.943s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version...
FAILED (remote: 43 main version check fail)
finished. total time: 122.961s
BusstopBill44 said:
Thanks, i decided to try and go S-OFF. I flashed the correct RUU for 3.16 and I get an error message after I flash the RUU,zip
/RabiesShot_LINUX$ sudo ./fastboot flash zip RUU.zip
< waiting for device >
sending 'zip' (659905 KB)...
OKAY [ 45.943s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version...
FAILED (remote: 43 main version check fail)
finished. total time: 122.961s
Click to expand...
Click to collapse
Did you run babyracun before relocking and running the ruu?
tilltheend714 said:
Did you run babyracun before relocking and running the ruu?
Click to expand...
Click to collapse
Wow, I completely looked past that, thought I read that whole page thoroughly. It looks like after I failed at that RUU it no longer has TWRP installed, I really hate asking but what can I possibly do now?
BusstopBill44 said:
Wow, I completely looked past that, thought I read that whole page thoroughly. It looks like after I failed at that RUU it no longer has TWRP installed, I really hate asking but what can I possibly do now?
Click to expand...
Click to collapse
re-flash twrp
bigdaddy619 said:
re-flash twrp
Click to expand...
Click to collapse
another error, $ sudo ./fastboot flash recovery openrecovery-twrp-2.4.2.0-jewel.img
sending 'recovery' (8032 KB)...
OKAY [ 1.277s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.107s
and tried it with 2.4.1.0, which i had before, as well.
BusstopBill44 said:
Wow, I completely looked past that, thought I read that whole page thoroughly. It looks like after I failed at that RUU it no longer has TWRP installed, I really hate asking but what can I possibly do now?
Click to expand...
Click to collapse
I don't know if you can just install TWRP again or if you'll have to go through the HTCdev unlock again. You'll need the Unlock_code.bin for the Dirtyracun process anyway so you might as well get it again.
tilltheend714 said:
I don't know if you can just install TWRP again or if you'll have to go through the HTCdev unlock again.
Click to expand...
Click to collapse
^^^^ true
I don't know if this will work since you've already tried dirtyracun; but I just used this method to achieve s off. It's ridiculously easy, and took me 5 minutes..
http://forum.xda-developers.com/showthread.php?t=2163013
tilltheend714 said:
I don't know if you can just install TWRP again or if you'll have to go through the HTCdev unlock again. You'll need the Unlock_code.bin for the Dirtyracun process anyway so you might as well get it again.
Click to expand...
Click to collapse
alright, some progress, got my unlock from HTCDEV got the unlock token, restarted the whole S-OFF process over,got through the ruu.zip. it installed, It rebooted itself instead of allowing me to "sudo ./fastboot reboot bootloader." It booted to a stock rom (which is now 3.15), I was in shock that I had her phone working again. restarted to bootloader, noticed it was locked and s-on went back to the directions and had me unlock through the unlock_token and finall had me run "sudo ./RabiesShot...which is giving me errors.
Starting up...
Testing connection...
Test 1: Rebooting into bootloader
Waiting fastboot (18/60)
Waiting...
Test 2: Booting device...
Waiting ADB... (60/60)
Test 2: Booting FAILED
Reboot device manually
Connection test failed!
After this error I rebooted into bootloader and im S-ON with unlocked. can i jump right into s-off'ing it
BusstopBill44 said:
alright, some progress, got my unlock from HTCDEV got the unlock token, restarted the whole S-OFF process over,got through the ruu.zip. it installed, It rebooted itself instead of allowing me to "sudo ./fastboot reboot bootloader." It booted to a stock rom (which is now 3.15), I was in shock that I had her phone working again. restarted to bootloader, noticed it was locked and s-on went back to the directions and had me unlock through the unlock_token and finall had me run "sudo ./RabiesShot...which is giving me errors.
Starting up...
Testing connection...
Test 1: Rebooting into bootloader
Waiting fastboot (18/60)
Waiting...
Test 2: Booting device...
Waiting ADB... (60/60)
Test 2: Booting FAILED
Reboot device manually
Connection test failed!
After this error I rebooted into bootloader and im S-ON with unlocked. can i jump right into s-off'ing it
Click to expand...
Click to collapse
Yeah, you should be able to run rabies shot again. Did you enable USB Debugging befor trying to run rabies shot? And are you running linux 32-bit?
tilltheend714 said:
Yeah, you should be able to run rabies shot again. Did you enable USB Debugging befor trying to run rabies shot? And are you running linux 32-bit?
Click to expand...
Click to collapse
thanks, and after all that s-off/on nonsense I cant s-off with a 32 gb microsd....grrrr
BusstopBill44 said:
thanks, and after all that s-off/on nonsense I cant s-off with a 32 gb microsd....grrrr
Click to expand...
Click to collapse
You can try this
http://forum.xda-developers.com/showthread.php?t=2163013
But that requires root. You don't have a 2gb card laying around anywhere?
hi. my htc amaze is softbreaked and i need RUU to flash it . i don't know CID . How do I know which RUU i download ? i tested all i have file but did not answer.
pourya-man said:
hi. my htc amaze is softbreaked and i need RUU to flash it . i don't know CID . How do I know which RUU i download ? i tested all i have file but did not answer.
Click to expand...
Click to collapse
Maybe you can find your CID this way:
http://forum.xda-developers.com/showthread.php?t=1548090
pbergonzi said:
Maybe you can find your CID this way:
http://forum.xda-developers.com/showthread.php?t=1548090
Click to expand...
Click to collapse
thank's :laugh:
CID is HTC__044
Which RUU do I get?
pourya-man said:
thank's :laugh:
CID is HTC__044
Which RUU do I get?
Click to expand...
Click to collapse
If you are capable enough to flash your phone, you are capable of searching.
I searched, and without any certainty of what you did do or should do, found this link:
http://forum.xda-developers.com/showpost.php?p=41310223&postcount=135
If this link is helpful to you, be certain to use proper instructions for what you want to do.
Let me repeat that, "Be certain to use proper instructions for what you want to do."
thank my friend . problem fixed
Glad for you--you're getting pretty good at this.
Hello again . i s-off amaze and updated to ics but can't flash recovery
log :
---------------------------------------------------------------------------------------------------------------------------------
E:\Application\Android\Phone\HTC\01 Fastboot>"E:\Application\Android\Phone\HTC\0
1 Fastboot\Flash Recovery.bat"
E:\Application\Android\Phone\HTC\01 Fastboot>fastboot flash recovery recovery.im
g
sending 'recovery' (5502 KB)... OKAY [ 1.264s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 1.580s
---------------------------------------------------------------------------------------------------------------------------------
hboot is locked . i can't unlock it with Unlock_code.bin file.
What is the solution?
you need to get a new Unlock_code.bin file from htcdev.com, Something has changed older code won't work.