Related
Hi,
If you lost your charger for the prime would this work to charge the prime too or the keyboard dock ?
http://www.youtube.com/watch?v=UaG__WOWEHI
If you lost your charger, you would be better off buying a new one from a place like Office Depot (http://www.officedepot.com/a/products/768723/ASUS-Power-Adapter-For-Eee-Pad/). It would be safer and it would probably be better for your the longevity of your Prime.
Something like the charger shown in the video might work OK for the Prime. I say "might" because the Prime expects 15v not 12v and generally won't enter "charging mode" from only 12v. However it will still charge the tablet, just more slowly than the original Asus charger.
I build a charger for my car from a similar setup to what is in the video. I followed the directions that are in the ultimate accessory guide post. My charger switches to 15V so it charges at the normal rate. Mine also has a USB port so I can charge my phone at the same time.
i got my second charger from ebay. cost me $15, its was a new in box asus transformer wall charger. Now i have two and dont worry about it.
almightywhacko said:
If you lost your charger, you would be better off buying a new one from a place like Office Depot (http://www.officedepot.com/a/products/768723/ASUS-Power-Adapter-For-Eee-Pad/). It would be safer and it would probably be better for your the longevity of your Prime.
Something like the charger shown in the video might work OK for the Prime. I say "might" because the Prime expects 15v not 12v and generally won't enter "charging mode" from only 12v. However it will still charge the tablet, just more slowly than the original Asus charger.
Click to expand...
Click to collapse
I dont think its the prime thats entering "charging mode" but rather the charger itself that gets thrown into "Charge Mode". There is a connection at the 40 pin connector that goes from ground back to the charger, i do believe THAT is what makes the charger output 15v instead of 5v so it doesnt fry your other USB devices.
There are many people who have used home made chargers for their prime. Look for a thread talking about the pinout of the 40pin connector and you can find more. Hope this helps.
One of the things I was really excited about with the Lumia 920 was the built in wireless charging feature. Since the Nokia charging plate was selling for about 70 bucks (ouch) I decided to see what alternatives were available. I've tried two different wireless chargers so far with mixed results:
LG Electronics WCP-700 - This charger works great and I was able to snag it from amazon for 35 bucks shipped. If you want wireless charging but don't want to pay 70 bucks for one charger, then I highly suggest this model. You can get 2 for the price of one Nokia Charger.
Powermat 2x - I was hoping the community could give me some advice on the powermat. Naturally if you plug the powercube into the phone, it will charge just fine. BUT I noticed that if you put a charging plate on the charger and then put the 920 on top of it, the 920 will begin to go into charging mode, although when i tried doing that, it didn't really seem to be charging at any noticeable rate( I may have been taking the phone off the charger too frequently though). Does anyone know exactly what voltage and amperage the powermat wirelessly charges at? My concern is that the volts or amps will be off and damage could be done to the battery in my lumia 920. Any thoughts?
Good questions! I was wondering the same thing about the different mats out there.
What about the Energizer one?
Also, the LG one apparently beeps a lot...does it do so with the Nokia? When it finishes charging it turns off and lets the phone run off battery for a bit, then turns back on to top it off again, causing it to beep each time it turns on throughout the night. Have you noticed this?
LudoGris said:
Good questions! I was wondering the same thing about the different mats out there.
What about the Energizer one?
Also, the LG one apparently beeps a lot...does it do so with the Nokia? When it finishes charging it turns off and lets the phone run off battery for a bit, then turns back on to top it off again, causing it to beep each time it turns on throughout the night. Have you noticed this?
Click to expand...
Click to collapse
From what I've read, the Energizer QI chargers will work fine with the 920, I just didn't get one since the LG model was a bit cheaper. The LG one does beep, although I haven't found it to be too much of an issue. When I place the phone on the charger, the LG mat will beep and show the green charging icon, and my phone will make the connection noise. I also think the mat will beep occasionally when the phone is charged, since it lets the battery drain a bit, then starts charging again, although last night it didn't wake me up at all while I slept. You could probably remove the speaker from the LG pad fairly easily, although from my experience, it's not bothersome enough to be worth the trouble.
beebop483 said:
One of the things I was really excited about with the Lumia 920 was the built in wireless charging feature. Since the Nokia charging plate was selling for about 70 bucks (ouch) I decided to see what alternatives were available. I've tried two different wireless chargers so far with mixed results:
LG Electronics WCP-700 - This charger works great and I was able to snag it from amazon for 35 bucks shipped. If you want wireless charging but don't want to pay 70 bucks for one charger, then I highly suggest this model. You can get 2 for the price of one Nokia Charger.
Powermat 2x - I was hoping the community could give me some advice on the powermat. Naturally if you plug the powercube into the phone, it will charge just fine. BUT I noticed that if you put a charging plate on the charger and then put the 920 on top of it, the 920 will begin to go into charging mode, although when i tried doing that, it didn't really seem to be charging at any noticeable rate( I may have been taking the phone off the charger too frequently though). Does anyone know exactly what voltage and amperage the powermat wirelessly charges at? My concern is that the volts or amps will be off and damage could be done to the battery in my lumia 920. Any thoughts?
Click to expand...
Click to collapse
Doesn't the PowerMat use a different wireless charging standard? I thought I read somewhere it wasn't the QI standard.
PowerMat is its own standard.
Not sure where you are, but the plate is $50 and the stand is $70 here.
Might want to try mail-order?
As for other plates, I have a few lying around, but I don't want to risk my phone trying them without knowing. I have 2 plates and a stand, so I am pretty covered.
Philips DLP7210B/10 also works with the Lumia 920.
I ordered a Palm Touchstone off Amazon for $6 and free shipping. I'll know in a few days when it gets here if it works or not, but I read somewhere that it should.
Sorry to disappoint you, but the Touchstone does not work. It makes the charging notification sound, but the battery still drains; it doesn't charge at all.
I have the Maxell Airvolt QI charger. It works but the phone seems to get warm unlike the Fatboy charger I use at night.
jhoff80 said:
Sorry to disappoint you, but the Touchstone does not work. It makes the charging notification sound, but the battery still drains; it doesn't charge at all.
Click to expand...
Click to collapse
Doh!
I really hope someone makes a 12v charging pad to keep in your car. Plug into the cig lighter and lay the phone on the "pad" somewhere in the car. I know the new dodge cars have it as an option now.
john94si said:
I really hope someone makes a 12v charging pad to keep in your car. Plug into the cig lighter and lay the phone on the "pad" somewhere in the car. I know the new dodge cars have it as an option now.
Click to expand...
Click to collapse
There's no reason why a 12v adaptor of sufficient ampage wouldn't work. Just match up the plug and polarity to the DC adaptor that comes with the charging pad.
But obviously a QI charger is not designed for use in a car. QI only recently release their guidelines:
http://www.wirelesspowerconsortium....ermarket-chargers-v-10.pdf?force-download=yes
It seems there are two current wireless charging standards: QI and PMA
Powermat are PMA, and this is a copyrighted licensed standard, i.e., Powermat will get revenue/license on each device. There is a limited trial in Starbucks.
QI is open, and I think a "free" standard. They have public charging spots in Japan, and Japanese handsets are predominantly QI
This is all just what I've recently read, so I'm not an expert or utterly certain it is correct, but it does seem that Nokia 920's are to the QI standard, and so any QI charging plate should work...?
gilesjuk said:
There's no reason why a 12v adaptor of sufficient ampage wouldn't work. Just match up the plug and polarity to the DC adaptor that comes with the charging pad.
But obviously a QI charger is not designed for use in a car. QI only recently release their guidelines:
Click to expand...
Click to collapse
I personally plan to do just this. I figure a Qi compatible charger hard wired into the car, then find a good place to mount it with a thin grip pad covering it. It should work just fine.
SuperSport said:
I personally plan to do just this. I figure a Qi compatible charger hard wired into the car, then find a good place to mount it with a thin grip pad covering it. It should work just fine.
Click to expand...
Click to collapse
Make sure you post pictures when you do this.
Sent from my RM-820_nam_att_100 using Board Express
SuperSport said:
I personally plan to do just this. I figure a Qi compatible charger hard wired into the car, then find a good place to mount it with a thin grip pad covering it. It should work just fine.
Click to expand...
Click to collapse
Ooooo, my Edge has a little 'shelf' under the console that has a ribbed rubber bottom. And it has a 12v plug right beside it. I bet my husband (the engineer) might be able to wire up a charging plate. He would need to shorten the cord so it wouldn't flop around. But he's very good at that sort of thing.
This is a great idea! He works overseas but I think I have a new 'honey-do' for him on his next R&R. Thanks!
beebop483 said:
Any thoughts?
Click to expand...
Click to collapse
Anything that is a Qi charger should work, it's a standard.
http://en.wikipedia.org/wiki/Qi_(inductive_power_standard)
I have an Everyready Qi charger, the 920 and it are happy as clams together.
schettj said:
Anything that is a Qi charger should work, it's a standard.
http://en.wikipedia.org/wiki/Qi_(inductive_power_standard)
I have an Everyready Qi charger, the 920 and it are happy as clams together.
Click to expand...
Click to collapse
Nice! I'll get one too!
tabletop charging
I personally think it would be awesome to be able to integrate QI wireless charging into a tabletop. think about it, when you sit down at a table for dinner, you usually take your phone out of your pocket, right? what if you could charge it while you eat? why doesn't starbucks do this?:highfive:
i was shopping for a oem Car dock that would work with our phones but also fit any case i wanted to put in the dock so heres the solution im ordering mine this week
http://www.amazon.com/iBolt-Vehicle-Car-Mount-Dock/dp/B008B0WNA6
Did you get it? How did it work out?
Sent from my HTC One X+ using Tapatalk 2
I've seen this one on amazon, Kidigi usually makes good quality stuff and - as it looks - comes with the insert as well so it could be used w and w/o case
http://www.amazon.com/Car-Charger-M...2&keywords=kidigi+charging+car+dock+htc+one+x
...comparison with the price of the iBolt ...looks like the same device to me.
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
J Cubed said:
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
Click to expand...
Click to collapse
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
TeK9samurai said:
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
Click to expand...
Click to collapse
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
I agree that the ibolt is a little clunky but i love it. Its really sturdy. It stays in the position you locked it down at. It's easy to dock the phone with 1 hand. I havent noticed any charging issues but i'll keep an eye on that now that you mentioned it.
interesting
and to think i was going to try and mod my Atrix toys to see if i could make them work.. .this looks way easier, wonder why they dont include the proper cable in the first place or if there are any other docks similar
techcontrol said:
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
Click to expand...
Click to collapse
Hello,
Well it's been quite some time but I didn't wanna open a new thread for this.
I'm using the iBolt dock for my HOX for quite some time and as told above it charges really really slow.
You might say it is caused by the cable, makes sense, but the charger I use to connect the iBolt is the geniune HTC car charger, which does charge the phone pretty fast.
Also, I exit car mode when I don't need it and turn the screen off in order to charge more, but it randomly and frequently turns the phone on. Sometimes just the Android homescreen but sometimes it re-launches the car app too. I was planning to call iBolt for this but I do not have much hope for getting detailed information about the output (actually the USB pin design) since there is no information about this on the web sites.
Can anyone confirm that it supports fast (normal) charging? It becomes useless beacuse of this issue.
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
techcontrol said:
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
Click to expand...
Click to collapse
Late thanks =)
After writing that message it came to me too and checked it, though it was saying that it is AC charging but I can swear to anything, whether car mode or screen is on, or not, it is not charged in 1000mA mode.. When I directly charged it with the genuine charger, it was fine.
So bought a 2amp car charger, and used its cable, and it works fine now.
May be, the genuine HTC charger CABLE and the iBolt are not quite friendly with each other. I remember Nokia's not launching PC Suite when it was not a genuine Nokia cable, may be a trick like that. iBolt does not like genuine cables or genuine cable does not like oem "sockets"
Hey guys! Bought the official samsung charging pad today, for novelty factor more so then anything else if im honest! It was €55 to buy online here in Ireland (which is crazy money) but i got it along with a case for only €40 as part of a deal so i thought why the hell not. It came without a cable so naturally i assume i must use the fast charge cable with it? Here are a few questions i have.........
If using the fast charging cable with it , does that mean i will be getting fast charging capabilities from it? (iam assuming not)
If its generally not a good idea to use fast charge plugged in over night then does this apply to the wireless pad in conjunction with the fast charger?
And lastly. Can i run the cable from the usb port on my computer or does it have to be plugged in to a socket when using the wireless pad? The answers may seem obvious but just asking none the less! Not taking any chances with this baby ha
I have four of them. Two of the small rectangular ones from last year, and two of the newer round ones from this year, so I'll take a stab at your questions.
If using the fast charging cable with it , does that mean i will be getting fast charging capabilities from it? (iam assuming not)
I have not seen, nor did I expect to see, any difference using a fast-charger vs. standard. As such, I only use standard charger adapters for wireless duty.
If its generally not a good idea to use fast charge plugged in over night then does this apply to the wireless pad in conjunction with the fast charger?
My S6 Edge stops charging while on either version of the wireless charging pad, once it reaches 100%. The light on the (newer, round) pad goes from blue to green once it has reached this point.
And lastly. Can i run the cable from the usb port on my computer or does it have to be plugged in to a socket when using the wireless pad? The answers may seem obvious but just asking none the less! Not taking any chances with this baby ha
Unless your PC can source 2A from the USB port, then, no, you cannot use your PC USB port to power the wireless charging pad.
Any idea where i could get a longer geniune samsung charging cable so? I bought the wireless pad for use at a desk but the cable on the fast charger is too small to reach from the socket to the desk! I would need the cable to be at least another foot or two longer
Questions belong in Q&A, not General.
Thank you.
I have a question I'd like to add!
I've never used wireless charging before, can you use it on the s6 edge with a case on the phone? Does this impede the wireless charging? Thanks!
jkt97401 said:
I have a question I'd like to add!
I've never used wireless charging before, can you use it on the s6 edge with a case on the phone? Does this impede the wireless charging? Thanks!
Click to expand...
Click to collapse
Impede? Yes.
Any distance between the surface of the charging-pad and the back of your phone will impact the wireless inductive charging. The less, the better.
Also, obviously, any case that includes conductive materials will be a non-starter.
That said, my Speck case and my wife's (brand unknown at this moment) case work satisfactorily with both the Samsung round and rectangular charging pads. I have read that there are people that have had poor wireless charging experiences with some (probably thicker, more rugged) cases.
Searching should find the specifics.
Should I use the one by Samsung so as not to degrade the battery?
or it doesn't matter at all?
What brands would you recommend?
It doesn't matter. I use 2 official wireless chargers and one 3rd party pleeson brand.
Not one difference.
Sent from my SM-G955U using Tapatalk
I don't know, after the latest system update on verizon my 3rd party wireless charger stopped working. Only charges about 20% then stops.
Shouldn't be. But I'm waiting for the new convertible one to be on sale.
No problem with my choetech stand fast wireless charger.
The S8 supports most wireless chargers, but it's best to make sure the charger you pick was made for at least the S7 if you want to get the wireless fast charge function.
The transmitter for the wireless charger also needs to line up with the right spot on your phone or it might not make a proper connection. I had this issue with my S6 where the spot on the phone was lower than the charger, so I had to put something below the phone to line it up with the charger.
Just saw this fast wireless charger deals on Slickdeals! Hope useful for you: https://slickdeals.net/f/10178316-choetech-qi-wireless-charging-stand-for-galaxy-note-5-s8-s7-s6-edge-and-more-16-ac-fsss?src=SiteSearchV2_SearchBarV2Algo1
I snagged the official 2017 wireless charger for a steal at best buy. I showed them an online add from cdw and they took it!!! Only cause it was the last one in stock and they wanted to slang it quick. Lady at the register was surprised I got the deal.
Bought a Tronsmart Chocolate Bar charger. Works just fine, though I plan to move the charger circuit (replacing the microUSB port with a soldered USB cable or even a QC3.0 power brick) into a 3D printed phone stand.
I have a normal diy wireless charging coil. It heard up more than it charges.
I bought a Black Web wireless charger from Walmart originally as a temporary charger until we got in the Samsung one. Honestly not going to bother. It works well enough, no heat and holds the phone at 100% once charged.
I looked around on Amazon and it seems to be identical to several they sell, just different branding.
I'm content at the moment, was only $20.
My Nexus 6 charger worked only at normal speeds. I like the magnet in it so ordered magnets to attempt to modify the Blackweb charger. They aren't necessarily needed, just something I want to attempt.