[Q] help with my android hebe_plus_gosco - Android Q&A, Help & Troubleshooting

man, i wanna get cwm for my android, but its not listed on the supported list.
i've already rooted it, but im stuck with the recovery, pls someone help where to start?
its the spec from build.prop from my android
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=hebe_plus_gosco-user 4.0.4 IMM76D eng.root.20130124.172254 test-keys
ro.build.version.incremental=eng.root.20130124.172254
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.sw.version=COMBO_V1.20
ro.build.hw.version=COMBO_HW_MP
ro.bluetooth.name=Combo_Note
ro.build.sourcecode.version=6748
ro.build.date=Thu Jan 24 17:24:16 CST 2013
ro.build.date.utc=1359019456
ro.build.type=user
ro.build.user=root
ro.build.host=scmi7-ubnutu
ro.build.tags=test-keys
ro.product.model=hebe_plus_gosco
ro.product.brand=qcom
ro.product.name=COMBO 333
persist.fuse_sdcard=false
project.ct_b_library.mode=false
ro.product.board=7x27
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=odm
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm7627a
# ro.build.product is obsolete; use ro.product.device
ro.build.product=hebe_plus_gosco
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=hebe_plus_gosco-user 4.0.4 IMM76D eng.root.20130124.172254 test-keys
ro.build.fingerprint=qcom/hebe_plus_gosco/msm7627a:4.0.4/IMM76D/eng.root.20130124.172254:user/test-keys
ro.build.characteristics=default
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.7x27A.type=mdp
debug.composition.7x25A.type=mdp
dalvik.vm.heapsize=48m
#
# system props for the cne module
#
persist.cne.UseCne=none
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.fmc.mode=false
persist.cne.fmc.init.time.out=30
persist.cne.fmc.comm.time.out=130
persist.cne.fmc.retry=false
persist.dsds.enabled=true
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
#
# system prop for opengles version
#
ro.opengles.version=131072
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.ds_fmc_app.mode=0
#
# system props for IMS module
#
persist.ims.regmanager.mode=0
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for Bluetooth SAP profile
#
ro.qualcomm.bluetooth.sap=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
#system property for Bluetooth discoverability timeout in seconds
#0: Always discoverable
#debug.bt.discoverable_time=0
#
# System prop to disable strict mode flash on display
#
persist.sys.strictmode.visual=false
#
# System prop to enable/disable OMH. Enabled by default
#
persist.omh.enabled=1
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=1
#
#System prop to determine availability of
#analog fm path
#
ro.fm.analogpath.supported=true
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#
#System property for single instance recording
#
ro.fm.mulinst.recording.support=false
#
#System property for msm
#
ro.hw_plat=7x27a
#
# for using emmc partition instead sdcard
#
persist.sys.emmcsdcard.enabled=0
#
# for disable emmc partition support
#
persist.sys.emmcpartition=1
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=21
#
# system property to enforce Phone Mode view
#
ro.screen.layout=normal
#
# Turn off tiled rendering
#
debug.enabletr=false
#
#System prop for setting the pixel format
#
#[email protected]
#ro.staticwallpaper.pixelformat=RGB_565
#
#System prop for disabling the meta data mode for encoder
#
debug.camcorder.disablemeta=0
#
# Simulate sdcard on /data/media
#
#persist.fuse_sdcard=true
#add by [email protected]
# set usb default compositions
#
# if by_nv set to true and nv 4526 set to 3, usb config will set to user mode when boot completed
ro.usb.config.by_nv=false
ro.usb.config.factory=mtp,diag,serial_smd,serial_tty,rmnet_smd,mass_storage,adb
ro.usb.config.user=diag,serial_smd,serial_tty,rmnet_smd,mass_storage,adb
persist.sys.usb.config=diag,serial_smd,serial_tty,rmnet_smd,mass_storage,adb
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
#
# System prop for capping scroll velocity
#
#[email protected] +-
ro.max.fling_velocity=8000
#
# System prop for disabling the rendering dirty regions
#
hwui.render_dirty_regions=false
# for enable poweroff charging feature
persist.pwroffcharging.enabled=true
#
# System prop for enabling discontinuity for HLS Variant Playlist
#
httplive.enable.discontinuity=true
#
# System prop for enabling camera shutter sound
#
ro.camera.sound.forced=1
persist.data_netmgrd_mtu=1300
# System prop for enabling the cdrom feature
#
persist.service.cdrom.enable=1
#to avoid some apk startup failures
dalvik.vm.checkjni=false
############################################# basewin add begin #################################################
#
# System prop for enabling dualmicphone in call.
#
hw.dualmic_enabled=true
hw.dualmic_disable_in_speaker=true
#
# set ro.product.device value in system.prop instead of "echo "ro.product.device=$TARGET_DEVICE" " in buildinfo.sh
#
ro.product.device=msm7627a
persist.sys.timezone=Asia/Bangkok
persist.sys.country=ID
persist.sys.language=in
#
# Camera preview, capture, recording rotation.
#
#ro.camera.preview.rotation=90
#ro.camera.front.jpg.rotation=270
#ro.camera.back.jpg.rotation=270
#ro.camera.front.record.rotation=180
#ro.camera.back.record.rotation=0
#ro.camera.front.prev.rotation=270
#ro.camera.back.prev.rotation=90
#ro.camera.front.livesnapshot=180
####################################################################################
# SYSTEM
ro.sf.lcd_density=240
####################################################################################
####################################################################################
# TEST
# CTS, true or false
# jgq add
ro.test.cts=true
# ChinaTelecom true or false
# jgq add
ro.test.ct=false
# ChinaUnicom true or false
# jgq add
ro.test.cu=true
####################################################################################
#[email protected] add
ro.proximity_menu=1
ro.light_sensor_menu=1
####################################################################################
# TELEPHONY
# modem count and communication
# jgq add
# 0 - single
# 1 - dual slot single standby, DSSS
# 2 - dual slot dual standby, single call, DSDS_SC
# 3 - dual slot dual standby, dual call, DSDS_DC
ril.basewin.baseband=2
# modem network mode
# jgq add
# 0 - NETWORK_MODE_WCDMA_PREF
# 1 - NETWORK_MODE_GSM_ONLY
# 2 - NETWORK_MODE_WCDMA_ONLY
# 3 - NETWORK_MODE_GSM_UMTS
# 4 - NETWORK_MODE_CDMA (EVDO & CDMA 1X)
# 5 - NETWORK_MODE_CDMA_NO_EVDO (cdma 1x)
# 6 - NETWORK_MODE_EVDO_NO_CDMA (EVDO ONLY)
# 9 - NETWORK_MODE__GSM_WCDMA_LTE
# Note: if ril.basewin.modem is 2 or 3
# MUST be combination of two of these modes
# MUST be careful of the sequence, for example: 40 Means Phone 0 is CDMA and Phone 1 is WCDMA
# if ril.basewin.modem is 1
# MUST be combination of two of these modes
# unlike DSDS modem, in this case the sequence of definition is free, 40 or 04 means the same, which is W or C DSSS modem
ril.basewin.network=01
# Extra Modem Model
# jgq add
# extra modem type, like MT6252, Skip defining this if you do not use extra modem
#ril.basewin.extra_modem
persist.dsds.enabled=true
####################################################################################
# simple match min_match number for phone number (right to left) in contact/calllist/sms
# ro.contacts.match.number=11
# virtual function (HOME/MENU/BACK/SEARCH/CALL/ENDCALL) key vibrate function
ro.vk.haptics=1
# auto-loaded SIM/UIM contacts(ADN)
ril.basewin.adn.auto_load=true
####################################################################################
# CU Auto Register
#ro.autoreg.cu.provider=Hebe
#ro.autoreg.cu.model=Hebe
# valid value :0 (auto), 1 (show spn), 2 (show plmn), 3 (show spn&plmn)
persist.sys.spnrule=2
# OTA deviceModel
#ro.ota_config.device_model=Hebe
#for CAMREA interpolation
#ro.camera.front.max.pixels=1600x1200
ro.camera.back.max.pixels=3264x2448
# [email protected] 2012-05-09 +{ 110/119 must not be in the ril.ecclist in china
custom.ril.ecclist=110,119
# [email protected] 2012-05-09 }+
#[email protected]+{ vibrator time
ro.vk.haptics.time=50
#[email protected]+}
#display deviceinfo from deviceinfo.xml if it has info setting
ro.use.deviceinfo.file=true
# [email protected] + { for optimize system,eg: sina weibo
windowsmgr.max_events_per_sec=120
ro.kernel.android.checkjni=0
debug.enabletr=true
ro.max.fling_velocity=8000
# [email protected] + } for optimize system
ro.num.location.display=false
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
power.webview.DM=0
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r1
ro.com.google.clientidbase=android-google
ro.com.google.locationfeatures=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt