NOTE 2 Not showing imei or serial and no baseband...help? - Verizon Samsung Galaxy Note II

I got a note 2 thats showing no phone info at all and doenst seem to have a modem. Its on android 4.1.2
When I flash stock odin 4.1.2 it fails at flashing the modem. ALSO I CANT root first cause my phone is not recognized at all when its booted into android. Not in device manger or anything. But does work in download mode
PICS BELOW SHOWING MY PROBLEMS
Sent from my Nexus 5 using xda app-developers app

Kennii said:
I got a note 2 thats showing no phone info at all and doenst seem to have a modem. Its on android 4.1.2
When I flash stock odin 4.1.2 it fails at flashing the modem. ALSO I CANT root first cause my phone is not recognized at all when its booted into android. Not in device manger or anything. But does work in download mode
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Did you unlock it again? I'm guessing since you said you can't root means that you didn't use the stock image that was already rooted. Just had this same issue with a friend, flashed back to stock w/root, factory reset everything, and it worked. Then backed up everything and went to a new rom.

No I didnt unlock. Im uploading pics to show my problem.
My phone is not detected at all when plugged up to pc its just charged so no adb or rooting commands.
I used CASUAL but when it tries to push the PIT file it fails. Odin also fails when trying to use the PIT file and when it comes to flashing the modem
Sent from my Nexus 5 using xda app-developers app

Kennii said:
No I didnt unlock. Im uploading pics to show my problem.
My phone is not detected at all when plugged up to pc its just charged so no adb or rooting commands.
I used CASUAL but when it tries to push the PIT file it fails. Odin also fails when trying to use the PIT file and when it comes to flashing the modem
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
You made sure to put it in to debugging mode too, right?

Of course, thats simple.
Phone isnt recognized at all when plugged to pc.
Not in mtp, ptp, or adb. Nothing at all except indication that its in a power source.
Sent from my Nexus 5 using xda app-developers app

Kennii said:
Of course, thats simple.
Phone isnt recognized at all when plugged to pc.
Not in mtp, ptp, or adb. Nothing at all except indication that its in a power source.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Are you using the right version of casual for your fw?

you're not understanding me. dont matter my causal version i cant use casual because my phone is not recognized thru ADB
only thing its recognized thru is download mode. my pc shows NOTHING is plugged when my phone is on android and plugged up to the pc

Kennii said:
you're not understanding me. dont matter my causal version i cant use casual because my phone is not recognized thru ADB
only thing its recognized thru is download mode. my pc shows NOTHING is plugged when my phone is on android and plugged up to the pc
Click to expand...
Click to collapse
You said you used casual and when it tried to push the pit it failed.

Check your drivers or try another PC

I have a version of causal that does work on 4.1.2 and also allows u to start the command from download mode so thats how I was able to try casual.
Yes im 100% I have all drivers correct
Sent from my Nexus 5 using xda app-developers app

Kennii said:
I got a note 2 thats showing no phone info at all and doenst seem to have a modem. Its on android 4.1.2
When I flash stock odin 4.1.2 it fails at flashing the modem. ALSO I CANT root first cause my phone is not recognized at all when its booted into android. Not in device manger or anything. But does work in download mode
PICS BELOW SHOWING MY PROBLEMS
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
hi,
ideally, Nand Erase All option is not to be selected in Odin which you selected....this option has unexpected problem like the one you encountered and hence this is the cause of your handset issue of Banseband & IMEI unknown. Please avoid this option in future.
Thanks,
Nikhil Dhand
Chat: [email protected]

I tried it without also. Same result. Ive tried flashing all android versions 4.1.2, which is the one i got the phone with and yes it was in this condition. Ive also tried 4.1.1 and 4.3. All stop at modem but one stopped at tz.img
Sent from my Nexus 5 using xda app-developers app

ive tried flashing modems by themselves but the fail. the phone will not take a modem
and i also get no connection to the pc when booted into android

Kennii said:
ive tried flashing modems by themselves but the fail. the phone will not take a modem
and i also get no connection to the pc when booted into android
Click to expand...
Click to collapse
Hi,
i am sharing you a link on this....use it and see if it helps or you can revert back to me as i have helped many in fixing their handset
http://forum.xda-developers.com/showthread.php?t=2196891
Thanks,
Nikhil Dhand
Chat: [email protected]

i have that program it fails at installing PIT file and so does Odin

Have you tried a different cable, for some reason it seems this phone is picky on what cables and even what USB port it wants to work on. Don't use a USB 3.0 port use a US 2.0.
Sent from my SCH-I605 using xda app-developers app

Yep tried that also . And ok a different pc. Neither detected the phone in any type of way in android
Sent from my Nexus 5 using xda app-developers app

any other ideas?

Please
Sent from my Nexus 5 using xda app-developers app

Have you tried wireless adb? What about airdroid? Just wondering exactly where you stand? Did the phone show a notification when plugged in? The Devil is in the details.
I've been Nebulized, such a sweet taste with none of the smoke, and other bull$h|+.

Related

Soft brick..cant find solution anywere

i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
KevandLynds said:
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Not actually true. It just needs to be a working micro USB cable. I use a generic micro USB cable (originally for a BlackBerry, I think) for all my flashing. Works fine.
this doesnt work guys, iv tried 3 different usb cables. nothing is happening it just wont connect. is it a way of installing a usb driver for my phone so it will reckonise my phone??
please help some one need help
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
blackgf said:
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
Click to expand...
Click to collapse
Yes i tried all that with no luck i just cant get my phone connected to my laptoo if i could I
could unbrick
Check for Windoze updates if you're unable to get your PC & phone to recognise each other after trying the obvious (different USB ports, different cables, different versions of Odin, making sure Kies/its processes aren't running in Task Manager on PC. Try *all* of these).
This has solved the issue for a few people over the last week or so. Failing that, uninstall Kies from your PC, reboot, redownload it, reinstall it, reboot & try again.
If that doesn't work, try a different PC.
Bratcher123 said:
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
Click to expand...
Click to collapse
This method not required to connect your mobile to PC.
Just need external sdcard and ics based recovery
If you are ics recovery version , we can come from this issue.
1, download any ics ROM ( stock based ) and copy to your external sdcard.
2, root the mobile using this way
http://forum.xda-developers.com/showthread.php?t=1501719
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel
3, as per the above guide once you flashed cwm.zip , you will get cwm based recovery screen.
4, wipe system and cache
5, install the custom ROM from external sdcard
I believe this method will work for you.
All the best
Sent from my GT-I9100 using XDA
sendhiloo7 said:
I believe this method will work for you.
Click to expand...
Click to collapse
I believe it won't since he bricked his device and can't even start the phone.
Do what MistahBungle said + make sure that you install Kies first so that you have the proper drivers for Odin.
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
That's nice.
Now have you tried the other suggestions that have been made ? If your phone & PC can't/won't recognise each other, you need to fix that first. Forget about CW not working. It's not relevant. You're not going to fix this without an Odin flash and making that happen should be your focus/priority.
Bratcher123 said:
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
Click to expand...
Click to collapse
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Might be. Try the (many) suggestions on the first page. Any one of those could be/resolve the problem. In addition to those suggestions, you can also try uninstalling Kies on your PC, rebooting, re-downloading it, reinstalling it, rebooting & then seeing if your PC & phone recognise each other.
But definitely try those other suggestions first.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
trell959 said:
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
Click to expand...
Click to collapse
I use Siyah, and have no such problems.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
grungysquash said:
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
Click to expand...
Click to collapse
That doesnt help as Odin doesnt recognise the phone in Download mode.
crunchie-uk said:
That doesnt help as Odin doesnt recognise the phone in Download mode.
Click to expand...
Click to collapse
+1 10char.....
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
AntAust1513 said:
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
Well I thought of that, but none of us can get into recovery at all.
Sent from my SGH-I897 using XDA

[Q] Firmware upgrade encountered an issue.

how i want to fix this matter ? help me guys. " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. " my screen S2 appear this. all time. i cant go anywhere. when i unplug usb cable it blank. cant on. after i plug in usb cable, it appear this. pc cant recognize this driver " OMAP4430 ". im death. please help me.
What have you done dude
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kind of help plss.
llrzall said:
kind of help plss.
Click to expand...
Click to collapse
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kunterk said:
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
llrzall said:
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
Click to expand...
Click to collapse
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Make sure you are flashing the right ROM for your device.........
kunterk said:
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
A similar kind of thing happened to my phone as well when I was upgrading to 4.0.4 from gingerbread via Kies. The installation got stuck when the phone was in the download mode and I had no other option than to disconnect. But yours got stuck while using Odin. I would suggest you to flash the firmware again. I hope your phone goes into download mode now. As for the drivers, uninstall everything related to samsung from your PC and then reinstall it. DO NOT UPGRADE SAMSUNG KIES IF IT ASKS YOU TO DO SO! AS I TOLD YOU A SIMILAR THING HAPPENED TO MY PHONE. MY PC COULD'NT RECOGNIZE IT AND I REINSTALLED EVEYTHING AND IT FINALLY SHOWED SOME SIGN. MAKE SURE YOUR ANTIVIRUS IS FULLY DEACTIVATED WHILE YOU EXECUTE THE FLASHING OPERATION!
leech4 said:
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
Click to expand...
Click to collapse
make senses. but genuine won't make any different, all micro usb cable are the same. i'm using my old Nokia micro usb cable now, and just works fine
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
first of all, while your phone is disconnected from USB cable, can you enter download mode?if no, then try to find someone that have JIG. else, as leech4 said, this might caused by your USB cable. OR might caused by your USB port of your PC. as i said earlier, try to repair your USB driver (not sammy USB driver, but your PC's usb driver). flash using ODIN, and kill kies services from task manager as kies will conflict with ODIN later. here i give you LSJ link(thanks to ApriliaM3) in case you don't have. extract the zip and use all the PDA, PHONE and CSC file. you can even use PIT to re-partition your system. (tested and proven to be working). good luck mate.:good:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
TheATHEiST said:
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
Click to expand...
Click to collapse
LOL. its ur phone? no rite. learn from mistake, make me perfect next time.
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Wow, I suspect this kind of brick or what so ever others called it. I've read some where, and they talking about JIG. If what they mean is the same like what I understood from my electronic knowledge, then you have to find someone that have JIG to do further troubleshooting directly from your board, not via usb. Well, I'm just saying. You might want to seek for other solution first since it's your device.
Cheers
Sent from my GT-I9100 using xda app-developers app

[Q] LGNPST Not Recognizing LGOG

My phone won't boot. I don't know what happened, but the Vol Up -> Recovery shortcut doesn't work. When I turn the device on LG flashes for a split second and then a black (but lit) screen. I can get the device in to download mode, but LGNPST will not recognize my phone on my desktop nor my laptop.
I was/currently am flashed to a July 4th build of Houston's Rootbox, CWM Recovery.
Any ideas on where to go from here?
I had to go into manage devices and install the drivers on my computer. Maybe even reinstall lgnpst or use a different cable. Good luck
Sent from my GT-P3110 using xda app-developers app
popshovit said:
I had to go into manage devices and install the drivers on my computer. Maybe even reinstall lgnpst or use a different cable. Good luck
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
Is it possible you could go in to a little more detail? I'm no stranger to manually installing drivers, but the device manager isn't finding anything in the (tSilenzio's LGNPST) driver folders. Switched cables but still no luck.
I think I downloaded them from lg's website there's a link around here somewhere. Or u could probably Google it. I was just using lgnst the other day but I was all over the place. I forget where everything was
Sent from my GT-P3110 using xda app-developers app
Yeah, no dice, tried everything I could think of. Running to AT&T tomorrow and seeing what their verdict is. If they can't do anything I suppose I'm shipping it off to JTAG.
Edit: Pic of desktop/LGNPST/Device Manager: http://imgur.com/FtRsz2a

Please help! Sudden brick :(

I have a note 2 rooted and on jellybean rom. I never took any update. My phone won't boot up or get into recovery. I can get into download mode but I can't get Odin to work. I've tried different USB ports and cables (have not tried different computers yet). When I plug in cable and phone to pc or outlet it gets stuck on the battery logo and circle. When I try to get into recovery it displays Samsung name off and on. I'm trying Odin back to stock but like I said it won't see my phone when connected. I will get a new cable ASAP to see if that makes a difference. I have pulled battery sim and sd several times to no avail. I will leave them out for the night and try again tomorrow. Anyone else have any suggestions? Thanks ! I really appreciate it !
Sent from my iPhone using Tapatalk 2
looks like you've gone through most of the steps. Have you tried reinstalling the samsung drivers? Plug it in and let it charge for a few hours? Maybe the battery is too low.
Thanks for your suggestion! I have reinstalled the drivers and restarted PC already. Last night I left battery sim and sd card out but today I will leave it charged for a few hours to see if it changes. I have also ordered an new OEM charger and battery to see if that helps. I am currently transferring all files and programs for returning it to stock to my sd card so I can try it on a different PC. I will keep you posted as to my progress. Thank you so much for your help!!
Sent from my iPhone using Tapatalk
download mode
Hello,
I see that you state you can not get into recovery mode, But can you get it into download mode. If so you maybe able to use adb and push the pit file to it and then install the stock rom again.
jcody03 said:
Hello,
I see that you state you can not get into recovery mode, But can you get it into download mode. If so you maybe able to use adb and push the pit file to it and then install the stock rom again.
Click to expand...
Click to collapse
I'm unfamiliar with the steps I need to take to do adb. I've only used Odin but to update my progress or lack thereof, I am still unable to get Odin (either version) to communicate with my phone when it is connected. I have tried both my pcs (they worked in the past). I have tried different USB cables and ports. Do you know the steps I need to take to use adb? I will google it and see what I find. I will update soon. Thanks again for your help!
Sent from my iPhone using Tapatalk 2
download mode
cnotes2019 said:
I'm unfamiliar with the steps I need to take to do adb. I've only used Odin but to update my progress or lack thereof, I am still unable to get Odin (either version) to communicate with my phone when it is connected. I have tried both my pcs (they worked in the past). I have tried different USB cables and ports. Do you know the steps I need to take to use adb? I will google it and see what I find. I will update soon. Thanks again for your help!
Sent from my iPhone using Tapatalk 2
Click to expand...
Click to collapse
If you phone will not connect with your computer in download mode as well as recovery mode. I do not think there is much you can do other then see if you can get it replaced. I had have run into an issue like this before. Once I was able to get into download mode and push out the stock recovery onto the phone. But if it will not go into download mode as well there is not much I think you can do.
It will go into download mode. When connected to the pc Odin won't see it. Do you think using adb would be pointless at this point? I have not used a new USB cable so I wanted to wait at least for that to arrive along with an OEM battery I ordered to see if that helps any or is that pointless as well? Also does it matter where you store Odin on your pc ? (Internal vs on a sd card? Thanks for your help ! I may just need to send it in but wanted to try everything I could come up with.
download mode
cnotes2019 said:
It will go into download mode. When connected to the pc Odin won't see it. Do you think using adb would be pointless at this point? I have not used a new USB cable so I wanted to wait at least for that to arrive along with an OEM battery I ordered to see if that helps any or is that pointless as well? Also does it matter where you store Odin on your pc ? (Internal vs on a sd card? Thanks for your help ! I may just need to send it in but wanted to try everything I could come up with.
Click to expand...
Click to collapse
I would first try the new cable and but it into download mode and try to push the pit file that is here: http://forum.xda-developers.com/showthread.php?t=2024207
I would try to follow the un-root section I know there is a lot of issue with the note 2 and updates or unrooting where it will not find the recovery because when you use Cause it moves the location of it. This might help. good luck.
I have my new battery. Just waiting on the cables
Sent from my iPhone using Tapatalk
Sounds, Like a bad EMMC, If Your Phone doesn't get in to recovery and if it wont get recognized by Odin. Try updating the drivers, than Try Flashing back to the First firmware that came with the note II which is 4.1.1 So Try it, If it doesn't work like that, than it's indeed a bad EMMC on the board. Good luck my Friend!
osnu1008 said:
Sounds, Like a bad EMMC, If Your Phone doesn't get in to recovery and if it wont get recognized by Odin. Try updating the drivers, than Try Flashing back to the First firmware that came with the note II which is 4.1.1 So Try it, If it doesn't work like that, than it's indeed a bad EMMC on the board. Good luck my Friend!
Click to expand...
Click to collapse
Thanks for the suggestion! I'm already on 4.1.1. I've never updated my note 2. I have updated drivers (although I can't find it in device manager but I've indeed downloaded it via my pc not via phone/ cable) I'm hoping its not a had EMMC because I don't know what that is but it sounds like that would make it a hardware issue correct? I'm hoping its just bad cables (I have old cables) and a bad battery (I still have the original battery on moderate to heavy usage) but recently became second device when I got note 3 (just in time lol)
Edit: is it still necessary to flash 4.1.1 if I'm already on it ? Thanks again!
Sent from my iPhone using Tapatalk 2
Can anyone point me in the right direction in using adb to fix my issue? Thanks !
Sent from my iPhone using Tapatalk 2
I give up. It's truly dead. Tried new battery and charger to see if I can flash stock or recovery no luck. ill send it in for repair or sell as is on eBay. Blah this bites.
Sent from my iPhone using Tapatalk 2
Try using different USB ports on your computer! I had same problem, Odin didn't show phone connected So I just tried different USB ports and one of the three ports showed connected Give it a shot and hope it helps!
Sent from my SCH-I605 using xda app-developers app
[ QUOTE=Goody68;48435738]Try using different USB ports on your computer! I had same problem, Odin didn't show phone connected So I just tried different USB ports and one of the three ports showed connected Give it a shot and hope it helps!
Sent from my SCH-I605 using xda app-developers app[/QUOTE]
Sadly I've tried different ports and 3 different computers with no luck. Idk if ADB would be any different if my computer can't see the connection with the phone. I'll just get another or get a different phone smh. Thanks for the help !
Sent from my iPhone using Tapatalk
One last thing, did you make sure your USB debugging was checked?
Sent from my SCH-I605 using xda app-developers app
USB debugging on my phone? If you mean that then my phone is dead so I can't check but it was prior to my phone dying on me.
Sent from my iPhone using Tapatalk
jcody03 said:
Hello,
I see that you state you can not get into recovery mode, But can you get it into download mode. If so you maybe able to use adb and push the pit file to it and then install the stock rom again.
Click to expand...
Click to collapse
I am unable to locate genuine resources on where to download ADB files and how to use it. Would you happen to know where I can find them ? Thanks !
Sent from my iPhone using Tapatalk

[Q] Please help me to go back to stock rom / problem with connecting to PC

Hi, I have asked this question few months ago but i couldn't get the answer and also, somehow I couldn't login so I have made the account again and I have been searching around to find out the answer for my problem but I couldn't
I have few questions/issues.
I have Galaxy S3 (GT-9300). I have brought in it New Zealand but it was unlocked phone. So when I did was installing the omega rom, I found out that the rom it had was the rom from one of the europe countries (I can't remember)
I was wondering if I can install any GT-9300 stock rom to get back to stock rom phone or do I somehow have to find out which stock rom it had before?
The other question is that I was trying to reinstall and update the omega rom from the scratch by going to stock rom then installing the latest omega rom. But my phone somehow won't connect to the PC, it charges properly and I know its not the computer or cable 's problem. I have searched and searched on google but couldn't find any solution to resolve that. (Tried different versions of Kies, tried removing everything turning off the phone and restarting, tried to changed to tfs(?) mode and other stuff)
Because of that, I can't use Odin to change Roms or anything. Is there anything I can do to resolve this problem or changing Roms without connecting to the computer?
Currently, I have Omega v54.
Thank you so much
Go read the sticky thread in general forum, how to return to stock.
You can use any firmware for the i9300 but best is the latest for your country.
Sorry but the main problem is that my phone is not getting recognized by the computer so i cant use Odin to do that. Please read the whole contents
Try different versions of drivers.
Sent from my GT-I9300
What do you mean by different drivers?
I have tried all the USB 2.0 and USB 3.0 slots on my pc
but no luck.
The message i am getting is ' USB Device Not Recognized' 'One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message'
You have skipped several steps in the learning process. Go read the sticky thread in general forum, you'll need the correct Samsung drivers to connect your pc with Odin.
I did that while ago, and did that again this morning. uninstalled kies, installed latest Samsung USB driver. but exactly same as before.
same usb error message. and on the device manager, it shows up as unknown device.
another thing I found is that on *#7284# (Service mode) I can only find UART : MODEM, PDA USB: MODEM, PDA. (I have tried this with USB debug mode)
Kies stops Odin from working
Sorry I think you are keep saying the same thing but I DO NOT HAVE Kies. didn't have it for at least 4 months now.
and its the problem with connection to the PC more than going back to stock rom.
Need to resolve the connection problem first to do the Odin step.
please read the messages properly before reply.
jin0616 said:
Sorry I think you are keep saying the same thing but I DO NOT HAVE Kies. didn't have it for at least 4 months now.
and its the problem with connection to the PC more than going back to stock rom.
Need to resolve the connection problem first to do the Odin step.
please read the messages properly before reply.
Click to expand...
Click to collapse
Uninstall all the drivers and try my,magic, drivers
https://www.dropbox.com/s/fhimf3vi737by0n/Samsung-Driver.exe?dl=0
Sent from my Nexus 4 using XDA Free mobile app
Stevica Smederevac said:
Uninstall all the drivers and try my,magic, drivers
https://www.dropbox.com/s/fhimf3vi737by0n/Samsung-Driver.exe?dl=0
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you Thank you so much. Its working. my computer is recognizing the phone. :laugh:
How did you do that? is it a special driver?
Now I can start on going back to stock rom
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
jin0616 said:
Thank you Thank you so much. Its working. my computer is recognizing the phone. :laugh:
How did you do that? is it a special driver?
Now I can start on going back to stock rom
Click to expand...
Click to collapse
Nothing special,just used by me and i know they must work
Sent from my Nexus 4 using XDA Free mobile app
---------- Post added at 22:25 ---------- Previous post was at 22:20 ----------
jin0616 said:
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
Click to expand...
Click to collapse
Then it's something wrong either with usb cable,usb port(on Pc) or ,most likely,micro usb on your phone.
When you insert usb cable into micro usb port,try jerking it up and down,left and right but gently and listen will it make connection for a second,at least.
Sent from my Nexus 4 using XDA Free mobile app
Ok i will try that. This is a stupid question but If the phone port is damaged, is it going to be extra cost to repair that for custom rom installed phones? (i live in new zealand)
jin0616 said:
Ok i will try that. This is a stupid question but If the phone port is damaged, is it going to be extra cost to repair that for custom rom installed phones? (i live in new zealand)
Click to expand...
Click to collapse
If you have warranty,yes but it's 20$ max.
Sent from my Nexus 4 using XDA Free mobile app
jin0616 said:
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
Click to expand...
Click to collapse
Try another usb cable, another usb port.
Stevica Smederevac said:
If you have warranty,yes but it's 20$ max.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks. I will try to do that when I can get a chance.

Categories

Resources