hello folks,
since upgrading to android 4.3 I have not been able to install custom apps that are not available on play store.
unknown sources option is greyed out and there seems no way to enable it. Please see the attachment. when trying to install .apk the message that pops up is 'this app is blocked by device administrator'.
Please help me by suggesting solution or atleast a workaround to this problem.
A common issue when upgrading to 4.3 from kies. If I'm right and you're using official rom, then I suggest doing a factory reset + cache wipe in recovery mode (note- it will delete all of your apps, but internal storage will stay intact).
For instructions about how to enter recovery mode: https://www.youtube.com/watch?v=ANH-oatE6bk&feature=youtube_gdata_player
Sent from my GT-I9300 using Tapatalk
amirTor said:
A common issue when upgrading to 4.3 from kies. If I'm right and you're using official rom, then I suggest doing a factory reset + cache wipe in recovery mode (note- it will delete all of your apps, but internal storage will stay intact).
For instructions about how to enter recovery mode: https://www.youtube.com/watch?v=ANH-oatE6bk&feature=youtube_gdata_player
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
ermmm. I have installed rom via odin flashable zip file of and I have filed via chain fir.
it wasn't working before root either.
on a side note, I have Microsoft exchange installed apk from android 4.4 kit and work email id linked plus custom email ids too..
could that be controlling my security as security policy/ dialing unknown sources. ??
amy91 said:
ermmm. I have installed rom via odin flashable zip file of and I have filed via chain fir.
it wasn't working before root either.
on a side note, I have Microsoft exchange installed apk from android 4.4 kit and work email id linked plus custom email ids too..
could that be controlling my security as security policy/ dialing unknown sources. ??
Click to expand...
Click to collapse
When flashing rom with odin, there is a 'marging' issue (some files and data from pervious rom remains after flashing, which caused the device to be quite unstable- like the problem you're experiencing)
Backup all of your data, and go to recovey mode->wipe data/factory reset, and wipe cache.
That will reset your device to a factory state, but will also remove all previous apps which causing this issue
Sent from my GT-I9300 using Tapatalk
Related
so i installed cwm touch on my device,
factory reset
clear cache
clead dalv cache
format system
install beatstalk and get this error
E: can't copy meta-inf/com/google/android/update-binary
installation aborted
can anyone help me
i've tried from both my internal and external sd card
What version is CWM? You need 6.0.4.3.
Also, try re-downloading the rom and gapps.
Error I717 vs i717
I have installed CWM touch 6, wiped (2x) then goto install and get the error that "This rom is for I717, and your device is i717" I have formatted the sd card and downloaded 2 different versions of the 4.4 and both give the same error. Also when I try to install others roms I get an error about "Bad" file. Any suggestions?
Only bug I see is YouTube does not work. I uninstalled and reinstalled updates and also tried force stopping the app.
It will play the first video I choose but then it won't play anything else.
Otherwise, Great Rom!
ddochi11 said:
What version is CWM? You need 6.0.4.3.
Also, try re-downloading the rom and gapps.
Click to expand...
Click to collapse
cwm touch 6.0.4.3 and standard cwm 6.0.4.3
i've downloaded cm11 and installed beanstalk 4.4 downloaded rom and multiple version of the rom and all the same thing
Maybe try formatting the sd card
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Installed this ROM and GAPPS from the dev thread for t0lte device.
First issue: AOSP keyboard force close. Looked up solution - install Google KB via APK. Ok, managed to do that, then set it to default. The AOSP FC message still appears, although not as frequently as before, and at least Google KB works.
Next issue: No data, no phone network.
Next issue: Went to set up APN, entered information, Menu > Save, APN did not save.
Not sure what the problem(s) is/are. Wanted to try this ROM but maybe I'll wait a while to see if anyone else runs into the same issues and if so, if they get fixed.
Permissions?
Well apparently the APN issues are caused by any 4.4 ROM if it is installed using TWRP.
So I have tried a couple of 4.4 ROMS using CWM and yes, my issues with APN didn't crop up. However, if I used another ROM that wasn't 4.4 (Paranoid) and then restored a backup of a 4.4 ROM, the APN again disappeared and was not modifiable. Anyway it's not the fault of any particular ROM, it appears.
As for the other issues, I have not gone back to Beanstalk since I posted my other message. Mostly because I don't really want to have to start from scratch every time I want to switch to a KitKat ROM (unless coming from another KitKat ROM, I presume - although I haven't ruled out that any recovery from backup wipes out APN).
Hopefully between the ROM developers and the custom recovery makers, this gets resolved and I can get back to feeding my ROM addiction.
I have a Note 2 (obviously), and I have rooted my phone the first day I got it and have never updated the phone since I purchased it. So, I am still on 4.1.2. My phone has been super laggy and I want to take the oppurtunity the when I reset my phone that I can take advatages of the new features that mobile phones have by upgrading all the way to 5.1.x.
So, I downloaded CM 12.1 by wilson3q with 5.1 system. I first tried the 5.0 version since the 5.1 looked too new, and did not have time to deal with the bugs. When I flashed the 5.0 version, I got errors of not being able to flash gapps for 5.0 and that I lost my root. I tried downloading the new TWRP to see if I can get a newer version that would work better, but no luck. I got an error saying that I lost my root privileges and did I want TWRP to fix it. I slid yes to fix, but no luck.
The same problem occurred when I tried with 5.1.
So, I ended up restoring my nandroid backup and I am back on 4.1.2 again with root working again.
I am thinking that I am probably supposed to 'step up' the updates, but not sure. Does anyone have a solution or a link to the solution that they can help with?
PS: I did not like the camera that came with the new mod. I do like the stock one. Are there flashes of cameras that I can use as well when I do end up upgrading?
Thank you in advance!!!
geske001 said:
I have a Note 2 (obviously), and I have rooted my phone the first day I got it and have never updated the phone since I purchased it. So, I am still on 4.1.2. My phone has been super laggy and I want to take the oppurtunity the when I reset my phone that I can take advatages of the new features that mobile phones have by upgrading all the way to 5.1.x.
So, I downloaded CM 12.1 by wilson3q with 5.1 system. I first tried the 5.0 version since the 5.1 looked too new, and did not have time to deal with the bugs. When I flashed the 5.0 version, I got errors of not being able to flash gapps for 5.0 and that I lost my root. I tried downloading the new TWRP to see if I can get a newer version that would work better, but no luck. I got an error saying that I lost my root privileges and did I want TWRP to fix it. I slid yes to fix, but no luck.
The same problem occurred when I tried with 5.1.
So, I ended up restoring my nandroid backup and I am back on 4.1.2 again with root working again.
I am thinking that I am probably supposed to 'step up' the updates, but not sure. Does anyone have a solution or a link to the solution that they can help with?
PS: I did not like the camera that came with the new mod. I do like the stock one. Are there flashes of cameras that I can use as well when I do end up upgrading?
Thank you in advance!!!
Click to expand...
Click to collapse
Try Phiz recovery, I've never had trouble with "[I605][CWM Advanced Edition] PhilZ Touch". If I recall we had to start using that one when kit-kat was released (i reserve the right to recall poorly)
I have a link to download mirror here:
http://forum.xda-developers.com/showpost.php?p=60899023&postcount=146
from your new recovery, you should be able to install CM12.1 and 5.1 gaaps recommended in the Wilson3Q i605 thread. from here:
http://forum.xda-developers.com/note-2-verizon/development/rom-unofficial-build-i605-t3069506
FWIW, I am on the 20150803 build and still using the GApps Minimal Edition 2015-04-04 for Android 5.1 (91 MB) from here:
http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
with no issues to report.
You may also need to track down updated radios (to flash from CWM). I think you can find a link to the updated ND7 Modem/Baseband here:
http://forum.xda-developers.com/showthread.php?t=2765021
somewhere in middle of first post
Good Luck!
PS you may want to flash superSU from recovery... get the zip from chainfire's xda thread here:
http://forum.xda-developers.com/showthread.php?t=1538053
(I've been dirty flashing for so long I dont' remember if the rom came with SuperSU or superuser... as such I can't recall if I had to flash this zip or not, but I probably did if I had issues with root)
Note you may also need to enable root from the settings menu after enabling developer mode.
there should be a "root access" option (or somehting like that there)
PPS are you also remembering to wipe data & clear cache/dalvik?
I have found zoot's mega wipe useful...
http://forum.xda-developers.com/showthread.php?t=1983489
it is for the N7100/N7105, butI have used it on the i605 quite a bit. Initial test result reported here:
http://forum.xda-developers.com/showpost.php?p=44093932&postcount=117
that said zoot's script is probably overkill
jheide44 said:
Try Phiz recovery, I've never had trouble with "[I605][CWM Advanced Edition] PhilZ Touch". If I recall we had to start using that one when kit-kat was released (i reserve the right to recall poorly)
I have a link to download mirror here:
http://forum.xda-developers.com/showpost.php?p=60899023&postcount=146
from your new recovery, you should be able to install CM12.1 and 5.1 gaaps recommended in the Wilson3Q i605 thread. from here:
http://forum.xda-developers.com/note-2-verizon/development/rom-unofficial-build-i605-t3069506
FWIW, I am on the 20150803 build and still using the GApps Minimal Edition 2015-04-04 for Android 5.1 (91 MB) from here:
http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
with no issues to report.
You may also need to track down updated radios (to flash from CWM). I think you can find a link to the updated ND7 Modem/Baseband here:
http://forum.xda-developers.com/showthread.php?t=2765021
somewhere in middle of first post
Click to expand...
Click to collapse
I assume that you are giving steps in order, BUT I feel that I should flash the radio to 4.4.2 first, in which the link was broken. I have spent a couple hours trying to find another link, but I am afraid that I may be using an incorrect one. Do you have a good link for that, please?
Also, I have ready the newest Samsung 3.10 Odin downloaded and installed, as well as the USB driver installed and downloaded the ADB fastboot. If I remember correctly, I am supposed to move this onto C: and run it to access the device (Note 2). It has been since Android first came out since I have used the ADB though. So, I apologize for the ignorance. So, do I just make sure the adb is in the same directory and run Odin or did I not need ADB and just run Odin?
I also assume that I run the Philz touch after I have gotten to 4.4.2 rooted first. Am I correct by assuming that?
jheide44 said:
Good Luck!
PS you may want to flash superSU from recovery... get the zip from chainfire's xda thread here:
http://forum.xda-developers.com/showthread.php?t=1538053
(I've been dirty flashing for so long I dont' remember if the rom came with SuperSU or superuser... as such I can't recall if I had to flash this zip or not, but I probably did if I had issues with root)
Note you may also need to enable root from the settings menu after enabling developer mode.
there should be a "root access" option (or somehting like that there)
PPS are you also remembering to wipe data & clear cache/dalvik?
I have found zoot's mega wipe useful...
http://forum.xda-developers.com/showthread.php?t=1983489
it is for the N7100/N7105, butI have used it on the i605 quite a bit. Initial test result reported here:
http://forum.xda-developers.com/showpost.php?p=44093932&postcount=117
that said zoot's script is probably overkill
Click to expand...
Click to collapse
Yes, I have done a cache/dalvik wipe a few times (because I have tried reflashing to get it to work with no luck).
I have downloaded the .zip version of superSU as well, and gapps minimal 5.1 with wilson3q's 5.1 ROM. So, I am almost ready to go with the exception of the correct radio upgrade file.
Thank you so much for your help!!! Much appreciated!
PS Will my old WifiTether apk files still work with 5.1 or do I need to get a new one?
Thanks Again!
No need for Odin....
http://forum.xda-developers.com/showpost.php?p=35396049&postcount=1
(Good read)
Just flash philz from twrp. Reboot recovery wipe/reset... then flash new ROM gaaps... Wipe/reset... Then reboot.
I can post the radio zip to my site later tonight. I believe you can flash that last, or later (from philz cwm, after getting on cm12.1)
Same as superSU. Check out ROM first. It comes with root that can be enabled in developer options. you can always reboot to recovery later and flash the zip.
PS. WiFi tether built into ROM "hotspot" (no VZW subscription required)
Pps try this for the nd7 radios
https://androidfilehost.com/?fid=23501681358546508
Sent from my SCH-I605 (VZW Note 2) on CM12.1 using Tapatalk
jheide44 said:
No need for Odin....
http://forum.xda-developers.com/showpost.php?p=35396049&postcount=1
(Good read)
Just flash philz from twrp. Reboot recovery wipe/reset... then flash new ROM gaaps... Wipe/reset... Then reboot.
I can post the radio zip to my site later tonight. I believe you can flash that last, or later (from philz cwm, after getting on cm12.1)
Same as superSU. Check out ROM first. It comes with root that can be enabled in developer options. you can always reboot to recovery later and flash the zip.
PS. WiFi tether built into ROM "hotspot" (no VZW subscription required)
Pps try this for the nd7 radios
https://androidfilehost.com/?fid=23501681358546508
Sent from my SCH-I605 (VZW Note 2) on CM12.1 using Tapatalk
Click to expand...
Click to collapse
I will try this later. Thank YOU! I have to take kids to practice now.
jheide44 said:
No need for Odin....
http://forum.xda-developers.com/showpost.php?p=35396049&postcount=1
(Good read)
Just flash philz from twrp. Reboot recovery wipe/reset... then flash new ROM gaaps... Wipe/reset... Then reboot.
I can post the radio zip to my site later tonight. I believe you can flash that last, or later (from philz cwm, after getting on cm12.1)
Same as superSU. Check out ROM first. It comes with root that can be enabled in developer options. you can always reboot to recovery later and flash the zip.
PS. WiFi tether built into ROM "hotspot" (no VZW subscription required)
Pps try this for the nd7 radios
https://androidfilehost.com/?fid=23501681358546508
Sent from my SCH-I605 (VZW Note 2) on CM12.1 using Tapatalk
Click to expand...
Click to collapse
Sorry to bother you, but I still am getting errors with Failed root access for Titanium Backup Pro. I also cannot find Developer Options in the settings menu.
I have tried flashing the radio before and after wiping and installing the ROM then gapps then superSU. I get into superSU and it asks me for root access and I grant it, but Titanium Backup Pro still says that it has no root access.
Any ideas? Thank YOU!!
geske001 said:
Sorry to bother you, but I still am getting errors with Failed root access for Titanium Backup Pro. I also cannot find Developer Options in the settings menu.
I have tried flashing the radio before and after wiping and installing the ROM then gapps then superSU. I get into superSU and it asks me for root access and I grant it, but Titanium Backup Pro still says that it has no root access.
Any ideas? Thank YOU!!
Click to expand...
Click to collapse
with SuperSU installed, you may need to just need to update binaries. open SuperSU and it should prompt you if necessary. the "normal" option should work (no need to flash from recovery)
for TiBu...
--within SuperSU settings you may need to disable (uncheck) "mount name separation".
--You may also have to enable unknown sources (under settings, security).
-- there might be something to enable for USB debugging as well (TIBU should prompt for it)
FWIW, you can restore user apps/data... but I would not attempt to restore any system data. Personally, I have found it best to get to know a fresh ROM for a while before trying to restore crap from an older ROM . there might be value in re-configuring apps manually and/or restoring them one at a time (after making sure the ROM is working properly) i.e. you won't need any of those aforementioned WiFi tether apps since it is built into the ROM now.
Instructions on enabling developer options in CM ROM, from here: http://wiki.cyanogenmod.org/w/Doc:_developer_options
1- In the Settings app, select About Phone (or About Tablet).
2- Scroll down, and tap the Build number entry seven times. On the seventh tap, you will be notified that "You are now a developer."
3- Return back to the main Settings menu. Developer options and Performance entries should now be visible.
Click to expand...
Click to collapse
(that is likely how to enable superuser that is "baked" into the rom, given you already installed SuperSU it may only complicate matters)
You may be rooted and just having TiBu issues. If all else fails you can check with an app. A long time ago, I've used "Simple Root Checker" by SimoneDev to check root/busybox. It is still in the play store.
Good Luck!
jheide44 said:
with SuperSU installed, you may need to just need to update binaries. open SuperSU and it should prompt you if necessary. the "normal" option should work (no need to flash from recovery)
for TiBu...
--within SuperSU settings you may need to disable (uncheck) "mount name separation".
--You may also have to enable unknown sources (under settings, security).
-- there might be something to enable for USB debugging as well (TIBU should prompt for it)
FWIW, you can restore user apps/data... but I would not attempt to restore any system data. Personally, I have found it best to get to know a fresh ROM for a while before trying to restore crap from an older ROM . there might be value in re-configuring apps manually and/or restoring them one at a time (after making sure the ROM is working properly) i.e. you won't need any of those aforementioned WiFi tether apps since it is built into the ROM now.
Instructions on enabling developer options in CM ROM, from here: http://wiki.cyanogenmod.org/w/Doc:_developer_options
(that is likely how to enable superuser that is "baked" into the rom, given you already installed SuperSU it may only complicate matters)
You may be rooted and just having TiBu issues. If all else fails you can check with an app. A long time ago, I've used "Simple Root Checker" by SimoneDev to check root/busybox. It is still in the play store.
Good Luck!
Click to expand...
Click to collapse
Thank you! It ended up being my version of Titanium Backup. I downloaded a new version and it is good. As far as restoring is concerned, I do not even want the apps themselves restored from there, because there may be a new version and would like a fresh install of those apps. I just want my data restored. For example, I have a surveillance software that I would just like to restore the entries (IP's usernames and passwords). I would like my email settings to be there, so that I do not have to re setup my 7 email addresses. My Text/SMS messages and my alarms. So, I am not trying to do a full restore.
On another note, I am trying to get my calendars back into my phone with no luck. I cannot install google calendar and get my google calendars to populate into my task widget, and the ROM is not letting me set up my POP email addresses. Also, I see no ringtones, so I have no ringers to ring my phone nor tones for my alarm clock. I flashed gapps for 5.1 and I see nothing extra from the ROM. I thought gapps was google apps. Am I trying to do stuff differently than you? There seems to be a few problems in that manner that I am trying to work with.
I am thinking of downgrading to 5.0. Maybe the 5.1 is too new?
Again, THANK YOU for your help!
geske001 said:
Thank you! It ended up being my version of Titanium Backup. I downloaded a new version and it is good. As far as restoring is concerned, I do not even want the apps themselves restored from there, because there may be a new version and would like a fresh install of those apps. I just want my data restored. For example, I have a surveillance software that I would just like to restore the entries (IP's usernames and passwords). I would like my email settings to be there, so that I do not have to re setup my 7 email addresses. My Text/SMS messages and my alarms. So, I am not trying to do a full restore.
On another note, I am trying to get my calendars back into my phone with no luck. I cannot install google calendar and get my google calendars to populate into my task widget, and the ROM is not letting me set up my POP email addresses. Also, I see no ringtones, so I have no ringers to ring my phone nor tones for my alarm clock. I flashed gapps for 5.1 and I see nothing extra from the ROM. I thought gapps was google apps. Am I trying to do stuff differently than you? There seems to be a few problems in that manner that I am trying to work with.
I am thinking of downgrading to 5.0. Maybe the 5.1 is too new?
Again, THANK YOU for your help!
Click to expand...
Click to collapse
I wouldn't downgrade, nobody is actively working on 5.0.2 anymore.... that thread is basically dead. Also, it is likely less "stable"/mature than what you have installed now (that is currently being maintained). i.e. you have the ROM that I would stick with.
like I said I wouldn't restore any thing into system (apps or data)... you can do whatever you please. (but it could be causing you more issues than just biting the bullet & configuring manually) i.e. restoring accounts might result in unanticipated issues, you came from a much older version of android.
all I had to do was install google calendar from play store and then the CM12 calendar stuff all worked (I might have had to restart and/or install the google calendar prior to setting up primary gmail). you might need to remove all your accounts and load them again (a factory reset might be faster though.)
also you might have to update google services and the play store before certain things "play nice".
I know you don't want to hear this but...
from here on out i'll likely point to all your issues being based on restoring system data. (based on my limited knowledge and personal experience). FWIW, I'd try to reconfigure/setup everything manually and you will likely have much better results.
jheide44 said:
I wouldn't downgrade, nobody is actively working on 5.0.2 anymore.... that thread is basically dead. Also, it is likely less "stable"/mature than what you have installed now (that is currently being maintained). i.e. you have the ROM that I would stick with.
like I said I wouldn't restore any thing into system (apps or data)... you can do whatever you please. (but it could be causing you more issues than just biting the bullet & configuring manually) i.e. restoring accounts might result in unanticipated issues, you came from a much older version of android.
all I had to do was install google calendar from play store and then the CM12 calendar stuff all worked (I might have had to restart and/or install the google calendar prior to setting up primary gmail). you might need to remove all your accounts and load them again (a factory reset might be faster though.)
also you might have to update google services and the play store before certain things "play nice".
I know you don't want to hear this but...
from here on out i'll likely point to all your issues being based on restoring system data. (based on my limited knowledge and personal experience). FWIW, I'd try to reconfigure/setup everything manually and you will likely have much better results.
Click to expand...
Click to collapse
I figured that, and feared that and the same time. So, what am I flashing onto the phone with gapps then? Also, one of the reasons I was wanting to go back was because there are a few apps that are not 'compatible' with this system. Meanwhile, I am going to wipe and reset again, and do what you suggested and just reconfigure.
Thanks again!
geske001 said:
I figured that, and feared that and the same time. So, what am I flashing onto the phone with gapps then? Also, one of the reasons I was wanting to go back was because there are a few apps that are not 'compatible' with this system. Meanwhile, I am going to wipe and reset again, and do what you suggested and just reconfigure.
Thanks again!
Click to expand...
Click to collapse
GAaps are the google apps... good read:
http://wiki.rootzwiki.com/Google_Apps
(hopefully I am not out of line for posting a link to that wiki)
many ROMS like CM don't' include gaaps due to licencing/legal issues. which is why the AOSP roms devs often have you flash the GAAPS package separately (also you can pick your package for your fact pattern... full gaaps/minimal gaaps/etc.).
Also the gaaps zip files you flash from recovery install the files into system. a lot of folks like the minimal editions of GAaps because it doesn't force all the apps into system. instead it just gets you up and running with the play store and a few essentials... that lets the user install all the other google apps as user apps, from the play store.
basically taking the "debloat" mentality as far as you can... keep stuff out of system and let the user decide what to install.
Hi,
I was able to root my 7510 wifi tab 10.1, using odin I installed twrp then cyanogenmods 4.2.2 rom and it worked fine and I was...happy. Then for some reason and update perhaps chrome started having problems so I tried to uninstall and reinstall, it locks up and reboots. I then went into twrp to do another wipe and re-install of 4.2.2 and I can't do the factory reset. It locks up when trying to deal with the data/media then reboots. I did - in superuser mode - go into a terminal line command screen and tried to manually delete files in that directory and it seems the darn chrome folder lets me delete some but locks up/reboots on other files.
Cyanogenmod 4.2.2 (10.1 19.04.27.47 pdt 2013)
Tablet gt-p7510
Kernel 3.1.10 cyanogenmod+
I am guessing that chrome files are either being access or locked in some way that is hosing the delete and I dont know how to force it or reset the files. I am a EE engineer having to much fun in android - fyi
Any ideas or help as they say is appreciated
Thanks
Ric
More on Data wipe issue
Just tried in twrp to repair the files system and it failed in the /data folder
I guess something is really buggered in there
I might try a format data approach once I backup the files on the tablet pending no ideas over the next few days
Oh, all the other apps work fine, can install/uninstall and using FF to brows now.....yeccchhhh
Try to update your TWRP Version.
I have recently acquired a P9 Plus (Chinese Version) and one of the issues with all of the Android phones sold in China is that they don't have Google services (Google in banned in China because of its refusal to comply with the Chinese internet regulations). There are ways you can install bits and pieces from the Huawei app store but it would be difficult to get all of the Google services together. There are ways already posted on XDA where you can install contact sync and app store one by one, but to me downloading through apkmirror (or any other site) could be a risk since those are uploaded by anonymous users and unless you can decompile the code and try to understand what's in those, it would be difficult to know if the apk is or is not doing something that are not designed for.
This guide assumes that you have unlocked bootloader and installed TWRP on it. Also I am not sure if you need to root the phone (which is pretty much for free once you had TWRP installed) but I had my phone rooted by the time I installed OpenGapps, obviously during this process you would have got the ADB drivers installed.
This process will wipe all user data, so please make sure you do a backup on your phone first.
First step is to download the installer zip to PC (or to SD card, I didn't have a spare SD card so I just download directly to PC), go to http://opengapps.org/, choose ARM64 (I know it is not actually ARM processor but somehow this package works, may be ARM and Kirin have compatible instruction set? That will sure make custom ROM development a lot easier!), 6.0 for OS version and choose the package you would like to have. I used nano but I am sure for other packages would work too.
Now go to TWRP on your phone. If you have downloaded the installer on your SD card you can just do Install -> select the zip and flash. I downloaded to my PC so I have to use the Sideload route, basically go to Advanced -> ADB sideload and simply do adb sideload FILE_NAME.zip (replace FILE_NAME with the actual OpenGapps package name you have downloaded). After that I originally tried to wipe caches and simply reboot but that didn't work for me.
So here is the trick, you will need to wipe Data and Internal Storage as well. I know, this sounds crazy but this is how it worked for me. If you managed to get other combinations to work feel free to suggest here as well.
What I did was I went to Wipe -> Advanced Wipe wiped Cache/Dalvik Cache, Internal Storage and Data (i.e., check everything except System and Micro SDCard) and then did a wipe.
After that, Reboot -> System.
Now once you are done with the set up, you will be greeted with an "uglier" version of the original UI (no fancy gold color!), but guess what, you should be able to see Google Play Store and you should be able to add Google accounts in Settings -> accounts.
For some reason I noticed if you try to add Google accounts you seem to be able to add one only (may be I overlooked something) so what I did was I went to the GMail app then go to Settings -> Add Account and that allows me to add the other Google accounts. Once you add a Google account on the GMail app it should be visible in other Google apps (App Store/Movies/Games, for instance) as well.
Any questions/better ideas feel free to post them below.
Deleted for "decency"
jvelasco said:
CFW: P9Plus B198 ROM Kangvip (excelent ROM!)
With micro opengapps...
Work fine...
Click to expand...
Click to collapse
Can you post download link please? I can't download, it is all in Chinese
Deleted
jvelasco said:
P9Plus_B198_Kangvip.zip
MD5: 349790fd71aa7b721bf172cfacec3056
For me the most useful of this ROM:
Click to expand...
Click to collapse
this rom without google apps
or how we can install google apps
Deleted
***DELETED****
To all: KangVIP ROMs has tonnes of bloatware in it including something called QiHu360 Browser that can't be removed automatically, please consider this before install the KangVIP ROM.
Deleted
***REMOVED***
zhuanyi said:
If you have read my post above, KangVIP has stuff that can not be removed (not easily at least), the official 198 has none of that.
If you want to post about the KangVIP ROM at least have the decency to start your own thread.
Beyond that, I don't really understand what you are trying to say.
Click to expand...
Click to collapse
To foolish words, deaf ears!
zhuanyi said:
I have recently acquired a P9 Plus (Chinese Version) and one of the issues with all of the Android phones sold in China is that they don't have Google services (Google in banned in China because of its refusal to comply with the Chinese internet regulations). There are ways you can install bits and pieces from the Huawei app store but it would be difficult to get all of the Google services together. There are ways already posted on XDA where you can install contact sync and app store one by one, but to me downloading through apkmirror (or any other site) could be a risk since those are uploaded by anonymous users and unless you can decompile the code and try to understand what's in those, it would be difficult to know if the apk is or is not doing something that are not designed for.
This guide assumes that you have unlocked bootloader and installed TWRP on it. Also I am not sure if you need to root the phone (which is pretty much for free once you had TWRP installed) but I had my phone rooted by the time I installed OpenGapps, obviously during this process you would have got the ADB drivers installed.
This process will wipe all user data, so please make sure you do a backup on your phone first.
First step is to download the installer zip to PC (or to SD card, I didn't have a spare SD card so I just download directly to PC), go to http://opengapps.org/, choose ARM64 (I know it is not actually ARM processor but somehow this package works, may be ARM and Kirin have compatible instruction set? That will sure make custom ROM development a lot easier!), 6.0 for OS version and choose the package you would like to have. I used nano but I am sure for other packages would work too.
Now go to TWRP on your phone. If you have downloaded the installer on your SD card you can just do Install -> select the zip and flash. I downloaded to my PC so I have to use the Sideload route, basically go to Advanced -> ADB sideload and simply do adb sideload FILE_NAME.zip (replace FILE_NAME with the actual OpenGapps package name you have downloaded). After that I originally tried to wipe caches and simply reboot but that didn't work for me.
So here is the trick, you will need to wipe Data and Internal Storage as well. I know, this sounds crazy but this is how it worked for me. If you managed to get other combinations to work feel free to suggest here as well.
What I did was I went to Wipe -> Advanced Wipe wiped Cache/Dalvik Cache, Internal Storage and Data (i.e., check everything except System and Micro SDCard) and then did a wipe.
After that, Reboot -> System.
Now once you are done with the set up, you will be greeted with an "uglier" version of the original UI (no fancy gold color!), but guess what, you should be able to see Google Play Store and you should be able to add Google accounts in Settings -> accounts.
For some reason I noticed if you try to add Google accounts you seem to be able to add one only (may be I overlooked something) so what I did was I went to the GMail app then go to Settings -> Add Account and that allows me to add the other Google accounts. Once you add a Google account on the GMail app it should be visible in other Google apps (App Store/Movies/Games, for instance) as well.
Any questions/better ideas feel free to post them below.
Click to expand...
Click to collapse
Hie, does re-locking bootloader clear the phone? Just like unlocking
ndiri said:
Hie, does re-locking bootloader clear the phone? Just like unlocking
Click to expand...
Click to collapse
I don't think locking does (at least with my experience in using the dload method), however if you want to unlock again later on it will wipe the phone. I'd recommend you to backup the phone before performing any of these actions though.
zhuanyi said:
I don't think locking does (at least with my experience in using the dload method), however if you want to unlock again later on it will wipe the phone. I'd recommend you to backup the phone before performing any of these actions though.
Click to expand...
Click to collapse
why is the dload not working in some instances? like on AL10, I cannot perform the dload update method, i have the latest update of emui 5.0 thats why i wanna re-lock then downgrade using hi-suit, then flash twrp and flash the updated version. it sucks,
but maybe you can help me on how to do the dload update.
i am fedup with these apps especially handsfree and this voicemail keep popping up every now and then
i was running uptill now android 5.1 and had rooted my mobile for s-off and any custom rom but didnt want to spend money on that
today i installed latest RUU on this mobile phone n since then im getting these annoying pop ups from various stock sprint apps
any simpler way to get rid of those?
babarasghar said:
i am fedup with these apps especially handsfree and this voicemail keep popping up every now and then
i was running uptill now android 5.1 and had rooted my mobile for s-off and any custom rom but didnt want to spend money on that
today i installed latest RUU on this mobile phone n since then im getting these annoying pop ups from various stock sprint apps
any simpler way to get rid of those?
Click to expand...
Click to collapse
To get rid of Hands Free Activation you just need to delete the \system\priv-app\HtcOMADM_SPCS folder in twrp
1. Boot into TWRP
2. Mount System
3. Use the file explorer and navigate to \system\priv-app\HtcOMADM_SPCS
4. Press the tick in the bottom right
5. Select delete
6. Unmount System
7. Reboot phone.
chimpsinties said:
To get rid of Hands Free Activation you just need to delete the \system\priv-app\HtcOMADM_SPCS folder in twrp
1. Boot into TWRP
2. Mount System
3. Use the file explorer and navigate to \system\priv-app\HtcOMADM_SPCS
4. Press the tick in the bottom right
5. Select delete
6. Unmount System
7. Reboot phone.
Click to expand...
Click to collapse
okay i am trying to re-install TWRP now ... after installing latest Stock RUU to get official updates ... i am re-installing TWRP but when i type
C:\Users\Babar>C:\Users\Babar\Downloads\twrp.img
i get "the disc image file is corrupted" i tried 2.8.5 version and also 3.0.3 version as well ... all r saying corrupted image
need help
babarasghar said:
okay i am trying to re-install TWRP now ... after installing latest Stock RUU to get official updates ... i am re-installing TWRP but when i type
C:\Users\Babar>C:\Users\Babar\Downloads\twrp.img
i get "the disc image file is corrupted" i tried 2.8.5 version and also 3.0.3 version as well ... all r saying corrupted image
need help
Click to expand...
Click to collapse
Where are you getting this from? "C:\Users\Babar>C:\Users\Babar\Downloads\twrp.img"
Just google installing TWRP on M9 and you should get loads of guides. If the image you're getting is genuinely corrupt you're going to have to check your sources as the ones downloaded from the main twrp pages are usually fine.
chimpsinties said:
Where are you getting this from? "C:\Users\Babar>C:\Users\Babar\Downloads\twrp.img"
Just google installing TWRP on M9 and you should get loads of guides. If the image you're getting is genuinely corrupt you're going to have to check your sources as the ones downloaded from the main twrp pages are usually fine.
Click to expand...
Click to collapse
This method didn't work for me, I tried the old command mode guide and same twrp worked fine for me.
Sent from OnePlus 3T
babarasghar said:
This method didn't work for me, I tried the old command mode guide and same twrp worked fine for me.
Sent from OnePlus 3T
Click to expand...
Click to collapse
Did you get bloatware removed?
https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en
Use caution. You can go thru batch settings, select remove all apps and then while in there, click deselect all. Then go thru and pick what you want to remove (EXTREME CAUTION you can remove an app or so that will require you to flash the rom again)
Other So Called "ROOT app remover" apps backup the app before you delete it and then decides for you if it should be reinstalled for you, and you cant delete them.
babarasghar said:
i am fedup with these apps especially handsfree and this voicemail keep popping up every now and then
i was running uptill now android 5.1 and had rooted my mobile for s-off and any custom rom but didnt want to spend money on that
today i installed latest RUU on this mobile phone n since then im getting these annoying pop ups from various stock sprint apps
any simpler way to get rid of those?
Click to expand...
Click to collapse
I recommended going into your settings. Apps. And just select the apps that are sprint related & force stop them, and then disable each app individually. After they are disabled clear the data & cache of each one. Then they'll no longer be displayed or asked to be updated. This is without having to install TwRp.
-E
hi
babarasghar said:
okay i am trying to re-install TWRP now ... after installing latest Stock RUU to get official updates ... i am re-installing TWRP but when i type
C:\Users\Babar>C:\Users\Babar\Downloads\twrp.img
i get "the disc image file is corrupted" i tried 2.8.5 version and also 3.0.3 version as well ... all r saying corrupted image
need help
Click to expand...
Click to collapse
i can help u with the twrp for ur htc m9