Hey guys, whats up?
So, for starter, i'm new in here so I don't know much about how things work.. i'm just gonna post my problem.
Yesterday I accidentally dropped my phone on the pool, and after doing
all the basic "life saving" on the phone, such as: dismount and dry
and didn't put the battery until 4 hours later, but when I put the
battery, the led flash turned on, and so I removed it real quick.
After this i used the hair dryer on cold for like 10 min to try and
keep it clean. Few hours later I decided to try again, this
time when I turned it on, it showed BLU logo and right after the
Android Robot with a writing under it that says: No Command. So I
pressed the power button and some options appeared, such as reboot
system now, wipe all data and apply updates..
(UPDATE)
Found a new way of turning the phone on, by pressing volume down + power button, and now I got the Factory Mode, which I've been told to
use the "Clear eMMC". I tryed, but it says: Formatting Data and then again, the No Command. error...
Pleease guys, I don't know what to do now
Thank you!!
Related
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
kameisama said:
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
Click to expand...
Click to collapse
Time to take it in and get a new one.....
Same problem here phone started b not coming out of lock mode. Backlight is on but no display on screen (if i tilt the screen left and right i can see light coming from behind) did about 6 hard resets and still same problem. also power button works whenever it wants to. this phone sucks @ss, i want my mogul back. on a second note my replacement will be here on wednesday.
Touch Pro stock rom purchased back in nov when it came out
yeah, i've had the same problem, i found if i hit my phone on the back or side and then batter pull and hit the soft reset while off, not the power button to turn it back on, it comes back on with color on the screen not just blank black screen with backlight, this works mostly every time, but when it doesn't, i just hold the power button down and do battery pull and hit the power button and it works, its like its got a combo of things you have to do before it works.. weird
Boot Up
I have also had similar problems. I for some reason sometimes have to remove my SD card and boot up without it for some reason. Not all the time, but every once in a blue moon. Not too sure how that affects anything, but you may try that too.
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Mayonesa said:
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Click to expand...
Click to collapse
Have you tried re flashing the ROM?
it wasnt HTC's fault for your phone's not booting...thats what happens when u try to mess with the hardware too much and you dont know what your doing
Would you want to sell???
Reboot Brick HTC process
****DOn't take battery out after hard boot***
1.just watch videohttp://www.youtube.com/watch?v=sk56olMkCtU and do what they do but dont take battery out. LEAVE phone STUCK on BOOT screen. Nothign else will move or work but you want phone just like that.
2. connect usb cable to active sync. (this may not link up but leave usb connected anyhow) Do not delete phone profile.
3.use rom like Download MightyROM6_Herman.exe avail at: http://www.lilrico.com/Mighty/mightyromblog/?p=454
4 although active sync is still attatched but may not be connecting. It will connect thru usb anyway when you run the rom software. http://www.youtube.com/watch?v=fV2I2WAFkg4&NR=1
This worked and kept phone from cutting on and off. and restored ROM. don't know about original htc boot. but your phone will work under this rom for now and you can go from there.
hey thanks plain ole dumb, it works now.
man I thought it was over.
thanks again
Hi everyone,
I've tried using search on my problem, but most of the time people who experience it have some custom ROMs or been flashing them, or doing some other modifications.
I've just been charging my phone, everything was working, until it charged to 100%, but forgot to unplug it just then. Next time I looked at it, it was off. I've held the power button and got a message "Android is updating.. starting apps", which was weird, as even official updates don't install themselves without confirmation - what update then? As it was stuck on that screen for more than 20 minutes, I've turned it off, and back on. The the Samsung S II I900 logo appears, the sound of booting, and a Samsung glowing logo, on which it's stuck forever.
I've tried a battery pull, tried leaving it overnight with that glowing logo, so it discharged and turned itself off, but it's all the same, it doesn't go past the logo.
I really don't want to lose some data I have there - mostly messages and some app data, which I'm not sure is backed up on google servers somewhere. I'm doing a backup for photos, but still, some can be lost if I do some plain factory reset.
What can I start with to try and bring it to life?
Sorry if it's a noob question that's being asked frequently.
Funny thing, I'm waiting for a Nexus 5 to arrive, as my SGSII is old and weird, and I guess it has sensed the treason, hehe. :\
rainscience said:
Hi everyone,
I've tried using search on my problem, but most of the time people who experience it have some custom ROMs or been flashing them, or doing some other modifications.
I've just been charging my phone, everything was working, until it charged to 100%, but forgot to unplug it just then. Next time I looked at it, it was off. I've held the power button and got a message "Android is updating.. starting apps", which was weird, as even official updates don't install themselves without confirmation - what update then? As it was stuck on that screen for more than 20 minutes, I've turned it off, and back on. The the Samsung S II I900 logo appears, the sound of booting, and a Samsung glowing logo, on which it's stuck forever.
I've tried a battery pull, tried leaving it overnight with that glowing logo, so it discharged and turned itself off, but it's all the same, it doesn't go past the logo.
I really don't want to lose some data I have there - mostly messages and some app data, which I'm not sure is backed up on google servers somewhere. I'm doing a backup for photos, but still, some can be lost if I do some plain factory reset.
What can I start with to try and bring it to life?
Sorry if it's a noob question that's being asked frequently.
Funny thing, I'm waiting for a Nexus 5 to arrive, as my SGSII is old and weird, and I guess it has sensed the treason, hehe. :\
Click to expand...
Click to collapse
Press volume up button+home button+power button. Press these three button at a same time to go into recovery mod.
As you are facing bootloop you have to do wipe data and wipe cache it will delete your apps and messages. I think this is the only solution to fix your phone at this stage.
Jeetu said:
Press volume up button+home button+power button. Press these three button at a same time to go into recovery mod.
As you are facing bootloop you have to do wipe data and wipe cache it will delete your apps and messages. I think this is the only solution to fix your phone at this stage.
Click to expand...
Click to collapse
that's not good news..
I was thinking of flashing some stock rom, like the one you get in a Kies updates, the no-wipe type.. Do you think it might work or I shouldn't even try?
hmm anyone? please?)
maybe there's still a way to access some data?
Just install a stock with Odin. All yr data will still be there. Cheers
hey there,
damn im so nervous right now.
ive not got too much time right now to fix my smartphone but I need it urgently.
i have a s3 with gorgoid custom rom, which i flashed like 4 month ago.
since then I DID NOT make ANY change to the rom or anything. no flashes etc.
I just used it.
now I just wanted to write someone back on whatsapp.
and suddely: smartphone goes off and on again. but I only see the first s3-logo: http://media2.giga.de/2013/10/Samsung-Galaxy-S3-Teaser-Bootloop.jpg
then it turns off and then on again.
...bootloop...
why so suddenly whithout any change to the system?
and even more: what can I do to rapidly fix it? at best without loosing any data........
thanks a lot!
edit: when inserting the battery back in it again, the s3 starts after 3 seconds automatically.
when I try to put in the battery and then quickly hold down volup-home-power button, I shortly see the recovery menu (I have cwm 6 or so) but the phone reboots quickly after it...
Reflash your existing rom, same version, don't wipe data. Clear cache and dalvik, try rebooting.
If that doesn't work then you'll have to factory reset, or may have bigger issues like efs corrupt.
edit: your power button is broken, try wiggling it or replace it.
I cant even get into recovery, thats the f***ing big problem always when inserting the battery, the phone starts itself.
isnt it normal that the phone starts itself when inserting the bootloop or how do you assume my power button is broken?!
and how to "fix" it at least so that it doesnt start itself anymore!? I cant break it off the phone... because then I cant start my phone anymore...
OMG and already fixed it.
what I did:
let the battery out for 15min.
in the meantime tried to rattle the power button a bit (to loosen it in case it somehow stuck and thus pressing constantly).
with 3 fingers pressing vol-up + power button + home button, then with another finger inserting the battery.
that lead me into recovery which then worked.
cleared cache and dalvik cache.
system reboot.
works now
PUH!!!!!!!
Next time if this problem occur again, try to "playing" around with your power button (like push harder three or five time).
I think your power button got stuck, that is why your phone always looping around like in the link you gave.
TheoDores said:
Next time if this problem occur again, try to "playing" around with your power button (like push harder three or five time).
I think your power button got stuck, that is why your phone always looping around like in the link you gave.
Click to expand...
Click to collapse
Yeah true, just happened again.
I hope I can fix it again now...
And I hope so hard that i doesnt get stuck at any time forever
hi! i have found similar threads, but they did not help me solve the problem, so here i am, writing a new one sorry guys. also sorry for my bad english, it is not my primary language..
i have an htc desire X which has a damage only on the outside display, the touch screen worked perfectly. then, all of the sudden the phone kept restarting, freezing for few seconds on the HTC welcome screen, then turning off again. it did that for about few hours then died completely, battery wouldn't charge either. on charge, red light on, no sign of life.
i have bought a new battery, and the phone turned on and did the same again, restarting every few seconds. i have pushed the low volume button + start combination, to have it go to the bootloader menu. since then it is frozen on that menu, stuck there. no buttons would work. they do work to get to the menu, but on bootloader not anymore.
i am a newbie, i dont know what to do, except for the fact that i have all contacts still in the internal storage and i was hoping to save them to an external disk/pc/microsd.
when i restarted the phone, the sim and the microsd were already out.
connecting the usb cable to the pc doesnt bring me anywhere either, my pc says "device not recognized" then it doesnt see any device.
please help me to get my data out somehow:crying:
little update:
this morning the "smart"-phone is not stuck anymore, i was able to get to the bootloader and select recovery, BUT unfortunately any attempt to push the on button to confirm it went wrong, phone keeps just restarting or freezes again on HTC welcome screen. any idea?
Hello everyone,
I've been a reader for a while, purely out of interest. I've never really dabbled with customizing android. In that regard I am a noob... I recently acquired a Medion X6001 that I was planning to build into my car as informant/navigation. Phone root successful, developer options active, debugging and oem options active. Automate programmed to all the standards I was happy with., worked great. All that was left to do to was get the thing to boot on charge. The "fastboot oem off-mode-charge 0" command was unsuccessful so I resorted to trying to find the system file responsible for battery icon on charge with power off.
That's where I went wrong. This phone has two icons; first a battery with a bolt, then switches to another with blue fluid and battery percentage. I found the blue fluid battery icon - 'system/bin/kpoc_charger', unfortunately I needed the killswitch battery icon. So I made another guess and renamed - 'system/bin/lmkd'. This was the file directly before ...kpoc and my daft logic lead me to believe that that might have been the right file. Obviously, it wasn't.
So the problem? The phone won't boot. Not really... At first, it was entirely stuck in bootloop. So, the good sheep I am, I factory reset the phone through recovery. The phone still went into bootloop for a few minutes, but came out of it to an applet saying 'optimizing apps'. Took 10 minutes to optimize and then went through to another applet saying something along the lines of "system process not found, do you want to wait?". Behind this applet I could tantalizingly see the startup screen of a freshly reset android.... It gave the option to wait or push ok, neither of which were actually active to touch. If I held the power button it would give me the option to shutdown, reboot or screenshot, also none of which where actually active to touch.
So after more googling, I wiped the cache through recovery. Everything stayed the same; bootloops for a few minutes then applets. Only now everything is in Chinese kanji... which is why I can't reiterate verbatim what the applets originally said...
After around 12 hours of tirelessly searching the web I've tried everything I've found but every time I get through a door there's another one closed. I can't install twrp or clockwork, I can't flash the rom, the phone won't let me unlock the bootloader in fastboot. Went I type the command it asks if I want to unlock it: volume up yes, volume down no. But fails: "remote access denied"
Since the factory reset, I don't have access through adb anymore. If I let the phone boot I can see it connect to the computer, but only as mtp. The file is entirely empty. I have no access to usb debugging. And to remotely access that, I need to be able to unlock the bootloader.
I can't get around the blocks and everything that is advised to get around bootloops and flash through fastboot are seemingly impossible because I no longer have proper access. But I can't get into the phone to get access...
And to make matters worse, just now as I type this.... I can't get into fastboot anymore. I think the phone battery is dead, but apparently doesn't accept a charge. When I plug it in the battery symbol appears, the dark red led lights up indicating very low battery. Very shortly after that the led turns off, which is not how it was before I buggered everything. Battery icon stays on, but when I push the necessary buttons to get into recovery, everything goes blank and the phone does nothing. When released, battery icon comes back and red led for a few seconds. Repeat. Phone has been plugged in all night....
I'm nearly bald from pulling my hair out. I hope there's someone out there that can give me a hand. I have a hard time believing I bricked the phone just by changing a bin file name.
Thanks in advance!
fastboot
I have access to fastboot again. Plugged the phone into a different cable, is now charging. I can see the battery % through recovery.
Back in business....sort of.
Any idea's welcome.
bump
Anyone?
Well I found the ultimate cure: buy a new one.
I will however keep fumbling around with the other one and hopefully as my knowledge increases I'll have a break through.