Zte v987 bricked ! Help plz! - Android Q&A, Help & Troubleshooting

Hello guys i need your help as my phone does not work at all! Originally I wanted to change my rom but the recovery menu was in Chinese and so accidentally i erased the root and rom that was in it , so when opening the phone stucks in ZTE's logo. So I found a management tool for rom and root and a guide to recover the operating system of the mobile. Unfortunately I did not succeed and instead accidentally tapped the format button that it was in Sp flash tools and so now the zte v987 does not open at all. All it does is to be recognized by the computer and the sp flash tools like usb. Finally i download the sp flash tools and the green circle was shown up but when I press the power button and the volume up to open the phone, it does nothing , just black screen .Please help me because I left without mobile.
Also where can i find all these missing files shown up below in the picture? ?
I need your help please,
Michael.

Related

[Q] Hard Brick

HI Guys!!
Iam using China phone CELKON A19.
I cant find in the devices section
I recently rooted my device and it worked well.
but when i use MTK tools and install CMW recovery mode.
I could not find recovery image so i used a different one.
AND IT IS BRICKED!!!
It is vibrating and goes off.I cant enter flash and download mode by holding voldown+power.
So guys please help me!!

[Q] Plz tell to repair it

I have got a great problem
i have a smartphone karbonn a9*
i rooted it
i opened the root folder and by mistake deleted the whole system folder
And now when i switch it on only the karbonn logo comes and the the smartphone is still
...
i tried to boot it in recovery mode or any other mode
but it didn't booted
i tried to flash it from pc by update zip...
But it didn't worked
plz help me

[Q] Need Help with Infocus M2 3G

Someone please post How to flash infocus m2 3g mobile...
I am stuck in bootloop...
I cannot goto recovery mode... because i flashed it with CWM from(find the link in text file in attachment) using mobileuncleTools.apk(both are available in attachments)...after this only I got this problem...
I can only getinto Fastboot mode only...(tried with combination of Vol+ and Power Button while putting the usb cable)
I tried with Vol- & Power button combination... Still BootLoop
I tried SP FlashTool but always says timeout....
Its a Locked Bootloader so cannot flash anything via fastboot mode...It always says "Security Deny - Err:0x2017"
and I tried to Unlock Bootloader by Entering command "Fastboot -i 0x0489 oem unlock"... its also failed and result is "Unknow Command"
Please some on Tell me How to Entirely Flash with Locked Bootloader.......
HI
TigerDhana017 said:
Someone please post How to flash infocus m2 3g mobile...
I am stuck in bootloop...
I cannot goto recovery mode... because i flashed it with CWM from(find the link in text file in attachment) using mobileuncleTools.apk(both are available in attachments)...after this only I got this problem...
I can only getinto Fastboot mode only...(tried with combination of Vol+ and Power Button while putting the usb cable)
I tried with Vol- & Power button combination... Still BootLoop
I tried SP FlashTool but always says timeout....
Its a Locked Bootloader so cannot flash anything via fastboot mode...It always says "Security Deny - Err:0x2017"
and I tried to Unlock Bootloader by Entering command "Fastboot -i 0x0489 oem unlock"... its also failed and result is "Unknow Command"
Please some on Tell me How to Entirely Flash with Locked Bootloader.......
Click to expand...
Click to collapse
Link gives CMW recovery for Infocus M2 ..not for 3g
of course infocus m2 3g is factory locked bootloader...so u cant flash recoveries
wait any unlocker
hi vivek has ur problem with m2 being solved?
hi all
thanx to all of u guys at xda i was able to get my infocus working again.here's what i did:-
1) downloaded stock ROM from needrom.com the one m mentioning here by the name @"LSO-2260-0-00WW-A02-update"
2) transfer it in the root of SD Card.
3)get into recovery mode,power hold alongwith volume increase and USB attached to PC.
4) The moing ment INFOCUS logo comes up leave the power buttton.
5)keep the volume increase pressed untill recovery screen pops up(you'll be able to make out it's recovery coz of the deceased android logo with exclamation mark in it's chest) or the screen changes color,if nothing comes written on the screen after recovery screen comes( ie the deceased android logo with exclamation mark in it's chest) plz press the power button
6)recovery menu will definitely pop up.
7) select install from SD card.
8) select the zip file from the drop down menu and install.
9) reboot then and wait it''l set up the way it sets up for the first time.
10) mind it it was for the INFOCUS M2 3G INDIA version
rgds n once again thanx.
it says the scatter file is missing.what to do?
gauravinvouge said:
hi all
thanx to all of u guys at xda i was able to get my infocus working again.here's what i did:-
1) downloaded stock ROM from needrom.com the one m mentioning here by the name @"LSO-2260-0-00WW-A02-update"
2) transfer it in the root of SD Card.
3)get into recovery mode,power hold alongwith volume increase and USB attached to PC.
4) The moing ment INFOCUS logo comes up leave the power buttton.
5)keep the volume increase pressed untill recovery screen pops up(you'll be able to make out it's recovery coz of the deceased android logo with exclamation mark in it's chest) or the screen changes color,if nothing comes written on the screen after recovery screen comes( ie the deceased android logo with exclamation mark in it's chest) plz press the power button
6)recovery menu will definitely pop up.
7) select install from SD card.
8) select the zip file from the drop down menu and install.
9) reboot then and wait it''l set up the way it sets up for the first time.
10) mind it it was for the INFOCUS M2 3G INDIA version
rgds n once again thanx.
Click to expand...
Click to collapse
I downloaded the LSO-2260-0-00WW-A02-update from serioushackguid4u.blogspot.com for my Indian version.but it says the scatter file is missing.what should I do now?please send me the link
.
Bro...i rooted my Infocus M350 and then i ran a ota update..but atlast i get an error..then my phone was in bootloop..
then i installed cwm recovery mode through fastboot mode and flashes the stock rom(dwnloded from xda's site) and then lollipopupdate.zip..
But samething happens..the bootlogo was according to lollipopupdate.zip but still i was in a bootloop..then i reflashes the stock(kitkat.zip) and when i rebooted my phone then there was a lighted black screen with no symbols and no logo...but it is connecting to pc and fastboot mode can be accessed but android screen is blackened with nothing showing...plz help..i m in a big trouble and Thanks in Advance
Sent from my GT-S7582 using XDA Free mobile app
What help u need
my infocus m2 during a update getting error and now when i switch on the phone then the sign of infocus view and then after showing that sign its again swich off
please help what can i do .....
reply must
recovery mode 'no command''
Bro i have Infocus m2 3g version . I forgot my password then i was go to the recovery mode there are show's 'no command' pls help me thanxx in advance
krtbc11 said:
Bro i have Infocus m2 3g version . I forgot my password then i was go to the recovery mode there are show's 'no command' pls help me thanxx in advance
Click to expand...
Click to collapse
User mobile is cwm no comment found show on logo just press volume up button and down button press it two time your phone opended on cwm recovery
Is there is any way to update infocus m2 3g in a latest android version?????
plzz answer soon.
Hi guys. Please help me. . My m2 3g is already rooted. Then i download Software update lastnight. I install it but error. Then after a few minutes. My m2 is stuck in a logo and no command. I don't have a backup... I already tried to fix it in my pc. But not connected. Please help me. (sorry for my bad english) need help guys.
its showing invalid ota missing sctter file installation aborted error
what should i do please help me
i am also facing same problem so plzzz send me that zip file or link for infocus m2 3g on my mail id "[email protected]" plzzz
[/YOUTUBE]
TigerDhana017 said:
Someone please post How to flash infocus m2 3g mobile...
I am stuck in bootloop...
I cannot goto recovery mode... because i flashed it with CWM from(find the link in text file in attachment) using mobileuncleTools.apk(both are available in attachments)...after this only I got this problem...
I can only getinto Fastboot mode only...(tried with combination of Vol+ and Power Button while putting the usb cable)
I tried with Vol- & Power button combination... Still BootLoop
I tried SP FlashTool but always says timeout....
Its a Locked Bootloader so cannot flash anything via fastboot mode...It always says "Security Deny - Err:0x2017"
and I tried to Unlock Bootloader by Entering command "Fastboot -i 0x0489 oem unlock"... its also failed and result is "Unknow Command"
Please some on Tell me How to Entirely Flash with Locked Bootloader.......
Click to expand...
Click to collapse
how to stop adds on infocus m2 3g as i am getting frequently on browsing on wifi
{reopen} infocus m2 4g need help
fastboot solution please.
fastboot boot cwm.img commang works but my device's bootloader stucks as it is showing download mode at left corner.
when i hold power button it simply restarts.
it isnt because of, i tried to flash that custom recovery .but my device is not permanantly flashable.
at that time it bricked and goes to a qualcomm qdloader something driver state.
when i overcome that problem , now i unable to go to cwm again.
before the problem of qdloader qualcomm driver ,my device easily accepts the cwm img . now it wont.
sorry for bad english

Soft Bricked Doogee dg300, need help :)

Hi,
i just got a Doogee dg300 from a friend and tried to update to a custom ROM to make it run more smoothly.
I installed CWM with the help of MTKDroid 2.5.3 and then installed MediaMod5 ROM through CWM.
Everything worked fine.
Clever me then decides to try out OBSIPOP5 ROM (cannot post link yet, new user)
Installed through CWM, now stuck in Bootloop.
Unable to enter download mode.
Unable to enter Recovery.
If i press any button or plug in the phone to an USB cable, phone shows: google logo -> white screen -> restart -> google logo -> ...
Any advise will be greatly appreciated!

Star S7589 unbrick

Hello.
I have big problem with my phone Star S7589 (mtk 6589 SoC). It started to hang from time to time and I had to take battery off to restart it. It helped everytime but lastly the phone didn't boot anymore. It doesn't boot to recovery or CWM. Every combination of vol+/- with power make no change, no boot. After connecting phone to the computer it shows as mtk com. SP Flash tool stops after download DA (red stripe) and show 0xFC0 error. I tried to flash only preloader or whole flash and it doesn't help. I tried also download only and format all + download option without success.
Is the memory broken or what could happen?
Please help. Regards.

Categories

Resources