Does anybody know why my hosts file gets reset after a reboot no matter whether I change with adaway or adblock or if I manually replace the hosts file myself and set to read only. Have searched about and only solution I read about was get a custom kernel. Although I am already on a custom kitkat ROM and using dorimanx kernel for galaxy s2. Also never had problems with hosts resetting on jb or ICS. Even creating a symlink to data/data/hosts doesn't work. On reboot the symlink just gets replaced with the original useless hosts file.
Sorry to bump but it is irritating and can't find a solution.
just some hints,
hosts file is located on /system partition which should be read only mounted during runtime.
check:
Code:
# mount | grep /system
/dev/block/mmcblk0p9 /system ext4 ro,seclabel,relatime,user_xattr,barrier=1,data=ordered 0 0
ro is ok. If so, the file can be changed only during boot (some init script) or later by app with root permission.
check if some init script is not involved:
Code:
# grep hosts /init*
Code:
#grep hosts /system/etc/init.d/*
Is there any output of the commands? I'm on i9100/CM10.2 and there is no output.
Then would be good to revoke root permissions to all apps (not unroot) and see if the issue is still there.
and also check the time of last change of the file:
Code:
ls -l /system/etc/hosts
is it realy during boot?
After spending entirely too much time on this I finally have a working solution. Save the contents of this script to your internal SD card. Ensure the last line is a blank carriage return.
Code:
#!/system/bin/sh
sleep 10
mount -o rw,remount /system
cp /storage/emulated/0/Download/working/hosts /system/etc
Install Script Manager (SManager), and set this script as: on boot, executable, as root. This will then copy your custom "hosts" file under your SDcard to /system/etc after 10 seconds.
Using this script through init.d didn't work for me, which I guess means whatever was over-writing my "hosts" file was doing after the init.d process.
Definitely remount system partition to read only again. Append following line to your script:
Code:
mount -o ro,remount /system
d0gd3v said:
Definitely remount system partition to read only again. Append following line to your script:
Code:
mount -o ro,remount /system
Click to expand...
Click to collapse
good call, thanks
Related
Okay, I got sick of typing
Code:
mount -o remount,rw /dev/block/mmcblk0p12 /system
or
Code:
busybox mount -o remount,rw /system
to mount the /system partition in RW mode so I created two very simple scripts that you can run through Script Manager to Mount RW and Mount RO.
I do quite a bit from ADB and I just found it more convenient to tap a shortcut on my home screen to mount the /system partition.
With the help of imchairmanm, I have fixed the scripts to be available globally, so all you have to do is type "mountrw" (without the quotation marks) to mount the /system partition in Read/Write mode, and type "mountro" (again, without the quotation marks) to mount the /system partition in Read Only mode.
So, now it can be run both ways!
Installation:
1. You must be rooted. (See my HowTo: Root your Motorola Droid X2 tutorial.)
2. You must have Busybox installed. If you are rooted, you have busybox installed. I've tested the scripts on BB 1.18.2, 1.19.2 and 1.19.3.
3. Download the mounts.zip file and extract it to a folder on your SDCard (internal or external, it doesn't matter). I use /mnt/sdcard/Scripts/Mounts/.
3. Download Script Manager from the market.
4. Open the Script Manager app and navigate to the folder you put the mount scripts in.
5. Tap the first mount script (mountro).
6. Tap the star and the Android superuser icon next to it. This configures the script as a favorite and to run the script as root.
7. Tap SAVE.
8. Repeat steps 5 through 7 for the second mount script (mountrw)
9. Now you can run each script from within Script Manager, or create shortcuts to them on your home screen.
To create the shortcuts, do the following:
1. Long press a blank area on your home screen and select Widget.
2. In the Choose Widget popup, scroll down to Script Manager Ads (if you have the free version) and tap it.
3. In the list, tap the mountro script. This will place the shortcut on your home screen.
4. Repeat steps 1-3 for the mountrw script.
Now, when you need to mount /system as RW all you need to do is tap the mountrw script, then when you are done, either reboot, or tap the mountro script.
The following is the code for each of the scripts:
mountro:
Code:
#!/system/bin/sh
# This mounts the /system file system as Read Only which is the default when
# Android is booted.
echo "Mounting /system in Read Only mode!"
busybox mount -o remount,ro / 2>/dev/null
busybox mount -o remount,ro rootfs 2>/dev/null
busybox mount -o remount,ro /system 2>/dev/null
echo "Done!"
mountrw:
Code:
#!/system/bin/sh
# This mounts the /system file system as Read Write in order to modify or add
# files to the /system file system.
echo "Mounting /system in Write mode!"
busybox mount -o remount,rw / 2>/dev/null
busybox mount -o remount,rw rootfs 2>/dev/null
busybox mount -o remount,rw /system 2>/dev/null
echo "Done!"
It's simple and no frills... The way I like it.
Alternative install:
I didn't realize it, but, I had already made a flashable zip. Just download mount_rw_ro-V1.1.zip and boot into the BSR and flash it from there.
If anyone has any suggestions, I'm open to them! Let me know!
Ciao!
Hm, I was curious since you said you couldn't get your scripts to run globally, so I tried them out by putting them in /system/xbin. After adjusting permissions and making sure owner and group were root, they ran fine and globally as-is. I wonder if the simpler version you started with would have worked or not?
imchairmanm said:
Hm, I was curious since you said you couldn't get your scripts to run globally, so I tried them out by putting them in /system/xbin. After adjusting permissions and making sure owner and group were root, they ran fine and globally as-is. I wonder if the simpler version you started with would have worked or not?
Click to expand...
Click to collapse
did you run them from /system/xbin? I put them in /system/xbin and then cd / to get back to root and tried to run them. They are not found.
Code:
# cd /system/xbin
cd /system/xbin
# pwd
pwd
/system/xbin
# ls -l mount*
ls -l mount*
lrwxrwxrwx root root 2011-12-05 13:08 mount -> /system/xbin/busybox
lrwxrwxrwx root root 2011-12-05 13:08 mountpoint -> /system/xbin/busybox
-rwxrwxrwx root root 316 2011-11-06 19:04 mountro
-rwxrwxrwx root root 328 2011-11-06 19:04 mountrw
# cd /
cd /
# pwd
pwd
/
# mountro
mountro
mountro: not found
# sh mountro
sh mountro
sh: Can't open mountro
#
That was the problem I was running into. I even tried sh mountro. The error "Can't open mountro" essentially means it can't find it.
If this is what you did, and you had different results, I would love to find out why. Thanks!
Ciao!
Yeah, that's what I meant by they are available globally. I can run them from anywhere in the filesystem. I'm not sure what the difference is. Mine have owner and group set to root and the applicable permissions set as well.
It runs through the script correctly, I get all of the echo messages, and if I cd to system afterwards, everything is rw or ro as it should be. I don't know what other information would be helpful for you, but I'll answer whatever other questions you might have. I don't quite understand why it'd ever have a problem with your scripts in the first place. It seems like a strange thing to happen.
Edit: I just ran through and ran the same commands as you did and they were all successful. It sounds like maybe something isn't right in your $PATH? That's the only thing I can think of. What does it say when you type "echo $PATH"? Either that or something with your terminal emulator or rom? Have you tried a different terminal? It shouldn't matter but you never know.
imchairmanm said:
Yeah, that's what I meant by they are available globally. I can run them from anywhere in the filesystem. I'm not sure what the difference is. Mine have owner and group set to root and the applicable permissions set as well.
It runs through the script correctly, I get all of the echo messages, and if I cd to system afterwards, everything is rw or ro as it should be. I don't know what other information would be helpful for you, but I'll answer whatever other questions you might have. I don't quite understand why it'd ever have a problem with your scripts in the first place. It seems like a strange thing to happen.
Edit: I just ran through and ran the same commands as you did and they were all successful. It sounds like maybe something isn't right in your $PATH? That's the only thing I can think of. What does it say when you type "echo $PATH"? Either that or something with your terminal emulator or rom? Have you tried a different terminal? It shouldn't matter but you never know.
Click to expand...
Click to collapse
I dunno what is going on. My path shows /system/xbin. Oh, I'm on Eclipse 1.3 (but that shouldn't matter)... Oh well.
Code:
# echo $PATH
echo $PATH
/sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin
It happens from the adb shell and from the terminal program on my DX2.
Hm. My $PATH is the same except it also includes /data/local/bin. That shouldn't matter. I'm on eclipse too and running the commands from the terminal in eclipse parts. I don't know why something in the path wouldn't execute. Does "which mountrw" find it? I had a problem earlier where I thought it wasn't finding a script I wrote, but it actually was failing at the first line because I had the wrong path to sh listed. If which finds your scripts I'd say it's more likely something with the script rather than the system. I'd also try writing a little hello world script and seeing if you can get that to execute globally too.
imchairmanm said:
Hm. My $PATH is the same except it also includes /data/local/bin. That shouldn't matter. I'm on eclipse too and running the commands from the terminal in eclipse parts. I don't know why something in the path wouldn't execute. Does "which mountrw" find it? I had a problem earlier where I thought it wasn't finding a script I wrote, but it actually was failing at the first line because I had the wrong path to sh listed. If which finds your scripts I'd say it's more likely something with the script rather than the system. I'd also try writing a little hello world script and seeing if you can get that to execute globally too.
Click to expand...
Click to collapse
Aw, CRAP! I've run into this problem when I develop on a Windows machine and try to run it on a linux box... ARGH! Thank GOD I use gvim. I was able to change the file format from DOS to UNIX, then save it and push it back out to /system/xbin. chmod'd it to 777 and ran mountrw/mountro and they work now... How can I be so friggin' dense... I know better than that...
Oh, to answer your question on the which command, yes, which finds them both.
What clued me in was you saying that the problem might be with the script. Thanks! It FINALLY works! I've updated the OP with the corrected files.
Also, does anyone want me to make this a flashable zip? Let me know.
Ciao!
Hello Gentlemen. Sorry to disturb you with a noob question but I cannot solve it for the life of me and I have tried everything I could find on the forums. I have an Aluratek Cinepad AT107F. I have successfully rooted it. I have full super user permissions and I have no problems deleting any files or folders EXCEPT one directory. Let me explain the situation.
I recently did a firmware update and it included brand new APKs for Youtube, also added Google Play Support, and added Angry Birds.
I am unable to update Youtube to the latest version. It gives a "Package file was not signed correctly. Uninstall the previous copy of the app and try again.".
So I attempted to do just what it had asked. I rooted just to do this. I tried removing it with Titanium Backup, I tried Root Uninstaller, I tried Root Explorer, I tried deleting using the "adb shell rm" command. I still get a "Read-only file system".
Even though I have root and granted root access to Root Explorer, I am unable to change the permissions for this /oem/apps/ directory. It's on the top level of the internal memory. I have no external SD card.
I've spent 10+ hours trying to figure this out and I'm sure someone knows something that I don't and can fix this super easy. I'm asking for your help, you're my only hope!
Your issue is that the update gave you modded files that the OEM doesn't want deleted. Most likely do to them not have permission from Google to do so. You will be hard pressed to find help here as we mainly deal with official releases and apks.
Wayne Tech S-III
zelendel said:
Your issue is that the update gave you modded files that the OEM doesn't want deleted. Most likely do to them not have permission from Google to do so. You will be hard pressed to find help here as we mainly deal with official releases and apks.
Wayne Tech S-III
Click to expand...
Click to collapse
Am I in the wrong sub forum? Is there another forum at XDA-Developers that could help?
Vindicoth said:
Am I in the wrong sub forum? Is there another forum at XDA-Developers that could help?
Click to expand...
Click to collapse
No nowhere on the site really deals with unofficial android versions and knock of devices. Your best bet will be the OEM
Read the error message again. The file is on a read-only filesystem. That is why you cannot delete it. In other words, you lack permission to write to the partition.
System partitions get mounted readonly to prevent modification. To remount /system as read-write,
Adb shell mount -o remount,rw /system
If you get "not permitted" error, your ROM's ro.secure means you cannot execute mount operations passed with adb command. So instead you must first open the shell,
> AdB shell
# mount -o remount,rw /system
Now you can delete:
Adb shell rm /system/file
If it is a directory
Adb shell rm -rf /system/dir
If you accidentally mistype that last command with a space beyween that first forward-slash and "s" you will have a very unworkable device....and that's why it is mounted read-only.
If the file is on a different read only filesystem, identify the partition the file is on and
Adb shell mount -o remount,rw /dev/block/id /LocToMountTo
You may have to specify the type
-t fstype
Adb shell mount
will tell you this
Don't forget to remount it as read-only (ro) when you are done
anotherguy19 said:
Read the error message again. The file is on a read-only filesystem. That is why you cannot delete it. In other words, you lack permission to write to the partition.
System partitions get mounted readonly to prevent modification. To remount /system as read-write,
Adb shell mount -o remount,rw /system
Now you can delete:
Adb shell rm /system/file
If it is a dir
Adb shell rm -rf /system/file
If you accidentally mistype that last command with a space beyween that first forward-slash and "s" you will have a very unworkable device....and that's why it is mounted read-only.
If the file is on a different read only filesystem, identify the partition the file is on and
Adb shell mount -o remount,rw /partition/id /folder
You may have to specify the type
-t fstype
Adb shell mount
will tell you this
Don't forget to remount it as read-only (ro) when you are done
Click to expand...
Click to collapse
Well I can access /system just fine. The problem is the /oem/apps folder is not in the /system folder. It's in the top level folder.
/system and /oem/apps are in the root directory. I can change the permissions on /system just fine using Root Explorer, but when trying to change the permissions using any method possible, /oem wont change.
This happens alot on Devices out of China and other places that sell knock offs. They make it so you cant delete their apps and if you do then it bootloops which only a reflash will fix.
Vindicoth said:
Well I can access /system just fine. The problem is the /oem/apps folder is not in the /system folder. It's in the top level folder.
/system and /oem/apps are in the root directory. I can change the permissions on /system just fine using Root Explorer, but when trying to change the permissions using any method possible, /oem wont change.
Click to expand...
Click to collapse
/system and /oem are different partitions then
mount | grep oem
or
adb shell mount | grep oem
Will tell you what /dev/block/xxxx the /oem is on and if it is mounted as read-only (ro)
> adb shell
# mount -o rw,remount /oem
zelendel said:
This happens alot on Devices out of China and other places that sell knock offs. They make it so you cant delete their apps and if you do then it bootloops which only a reflash will fix.
Click to expand...
Click to collapse
Ever get the feeling that you're writing in invisible ink lol?.. Eventually he will listen! You have great patience!
zelendel said:
This happens alot on Devices out of China and other places that sell knock offs. They make it so you cant delete their apps and if you do then it bootloops which only a reflash will fix.
Click to expand...
Click to collapse
Referencing zelendel's post, the device could fail to boot because it is looking for the removed app in /oem
So you could try to remove it from being referenced by the startup scripts.
Try doing a search for files that could be referencing the apk you want to remove.
> adb shell
# grep -r AppName.apk /system/etc
CtrlAltDelIrl said:
Ever get the feeling that you're writing in invisible ink lol?.. Eventually he will listen! You have great patience!
Click to expand...
Click to collapse
If it bootloops then I'll just flash it again, but its worth a try isn't it? Thanks anyways.
anotherguy19 said:
Referencing zelendel's post, the device could fail to boot because it is looking for the removed app in /oem
So you could try to remove it from being referenced by the startup scripts.
Try doing a search for files that could be referencing the apk you want to remove.
> adb shell
# grep -r AppName.apk /system/etc
Click to expand...
Click to collapse
Thank you for your very helpful posts and willingness to help me possibly bootloop my device
when I type the grep command it says it is not found, so I will download busybox onto my tablet and try those commands.
Vindicoth said:
Thank you for your very helpful posts and willingness to help me possibly bootloop my device
when I type the grep command it says it is not found, so I will download busybox onto my tablet and try those commands.
Click to expand...
Click to collapse
So after running mount | grep oem it shows this
[email protected]:/ # mount | grep oem
/dev/block/nandi /oem cramfs ro,relatime 0 0
So is it possible to change this directory to rw? I tried the mount -o rw,remount oem but it doesnt show anything after i input the command
[EDIT]
So it seems that the cramfs file system is read-only.
Vindicoth said:
Thank you for your very helpful posts and willingness to help me possibly bootloop my device
when I type the grep command it says it is not found, so I will download busybox onto my tablet and try those commands.
Click to expand...
Click to collapse
I love breaking things. It's only then we can figure out how it works.
Busybox is exactly what you need.
grep will search for strings within all files and subdirs of /system/etc; matching whatever you type for "AppName.apk"
It is a case-sensitive search unless you add
-i
So
grep -ri ....
or
grep -r -i....
Both would work.
But you don't even know if you need to be searching for a file to modify.
You may want to go ahead and delete the file and reboot.
If it fails, note the file(s) you deleted and know the system is looking for them and then proceed with seeing if you can identify a file in /system/etc that is looking for it's presence.
---------- Post added at 11:59 PM ---------- Previous post was at 11:53 PM ----------
Vindicoth said:
So after running mount | grep oem it shows this
[email protected]:/ # mount | grep oem
/dev/block/nandi /oem cramfs ro,relatime 0 0
So is it possible to change this directory to rw? I tried the mount -o rw,remount oem but it doesnt show anything after i input the command
[EDIT]
So it seems that the cramfs file system is read-only.
Click to expand...
Click to collapse
Commands that complete "quietly" mean they were successful.
If you type
# mount | grep oem
After
# mount -o rw,remount /oem
/dev/block/nandi /oem cramfs ro,relatime 0 0
Should have changed to
/dev/block/nandi /oem cramfs rw,relatime 0 0
anotherguy19 said:
I love breaking things. It's only then we can figure out how it works.
Busybox is exactly what you need.
grep will search for strings within all files and subdirs of /system/etc; matching whatever you type for "AppName.apk"
It is a case-sensitive search unless you add
-i
So
grep -ri ....
or
grep -r -i....
Both would work.
But you don't even know if you need to be searching for a file to modify.
You may want to go ahead and delete the file and reboot.
If it fails, note the file(s) you deleted and know the system is looking for them and then proceed with seeing if you can identify a file in /system/etc that is looking for it's presence.
---------- Post added at 11:59 PM ---------- Previous post was at 11:53 PM ----------
Commands that complete "quietly" mean they were successful.
If you type
# mount | grep oem
After
# mount -o rw,remount /oem
/dev/block/nandi /oem cramfs ro,relatime 0 0
Should have changed to
/dev/block/nandi /oem cramfs rw,relatime 0 0
Click to expand...
Click to collapse
Followed those steps and its still
/dev/block/nandi /oem cramfs ro,relatime 0 0
Apparently the cramfs is a read only filesystem by design.
Vindicoth said:
Followed those steps and its still
/dev/block/nandi /oem cramfs ro,relatime 0 0
Apparently the cramfs is a read only filesystem by design.
Click to expand...
Click to collapse
You need to create an image of the partition, mount the partition on a system with tools to edit it, extract the contents, and re-create the cramfs.
You would need a linux box or linux virtual machine like Virtualbox, or maybe cygwin has the tools. I would just download and burn a Linux LiveISO and run it from VirtualBox, creating a shared folder to get access to the image file (oem partition).
With debian system, you would do
# apt-get install cramfsprogs fusecram
fusecram allow you to mount the cramfs partition on Linux PC via
# mount -t loop cramfsOEM.partition /mnt/workingdir
However since we cannot simply mount the filesystem on the device by plugging into the usb port of the linux machine and mounting from there, we must first create an image (file) of /dev/block/nandi.
> adb shell
# dd if=/dev/block/nandi of=/nandi.img bs=4k
And then copy it to our pc so we can work with the file.
# exit
> adb pull /nandi.orig.img .
Now we can transfer this file to a machine with the requisite cramfs tools to modify the file.
If you look back, I wrote
# mount -t loop cramfsOEM.partition /mnt/workingdir
replace cramfsOEM.partition for nandi.orig.img, or whatever you named it.
Workingdir needs to exist, so
# mkdir /mnt/workingdir
Now you will have to look up cramfsprogs which will allow you to extract the contents to modify. On the Debian or Ubuntu linux machine "/mnt/workingdir" would be the equivalent of "/oem" on your Android device.
However, all this is could very well be for naught, as it is likely the firmware has marked this partition as "signed" so if we try to write back our modified image, the system will fail to boot since the size will be different. On the other hand, the firmware may very well just check to see the partition size is correct. And since you are decreasing the size, the new cramfs image created with a linux box will (should) fit in the old partition.
Fyi, an image file is like a zip file without the compression.
After you modify the cramfs, you can write it back with something like
> adb push cramfs.mod.img /
> adb shell
Then write over the old partition. However, you shouldn't write over a mounted file system so
# umount /dev/block/nandi
Then write over it.
# dd if=/cramfs.mod.img of=/dev/block/nandi bs=4k
Then reboot
# shutdown -r now
And see what happens.
anotherguy19 said:
You need to create an image of the partition, mount the partition on a system with tools to edit it, extract the contents, and re-create the cramfs.
You would need a linux box or linux virtual machine like Virtualbox, or maybe cygwin has the tools. I would just download and burn a Linux LiveISO and run it from VirtualBox, creating a shared folder to get access to the image file (oem partition).
With debian system, you would do
# apt-get install cramfsprogs fusecram
fusecram allow you to mount the cramfs partition on Linux PC via
# mount -t loop cramfsOEM.partition /mnt/workingdir
However since we cannot simply mount the filesystem on the device by plugging into the usb port of the linux machine and mounting from there, we must first create an image (file) of /dev/block/nandi.
> adb shell
# dd if=/dev/block/nandi of=/nandi.img bs=4k
And then copy it to our pc so we can work with the file.
# exit
> adb pull /nandi.orig.img .
Now we can transfer this file to a machine with the requisite cramfs tools to modify the file.
If you look back, I wrote
# mount -t loop cramfsOEM.partition /mnt/workingdir
replace cramfsOEM.partition for nandi.orig.img, or whatever you named it.
Workingdir needs to exist, so
# mkdir /mnt/workingdir
Now you will have to look up cramfsprogs which will allow you to extract the contents to modify. On the Debian or Ubuntu linux machine "/mnt/workingdir" would be the equivalent of "/oem" on your Android device.
However, all this is could very well be for naught, as it is likely the firmware has marked this partition as "signed" so if we try to write back our modified image, the system will fail to boot since the size will be different. On the other hand, the firmware may very well just check to see the partition size is correct. And since you are decreasing the size, the new cramfs image created with a linux box will (should) fit in the old partition.
Fyi, an image file is like a zip file without the compression.
After you modify the cramfs, you can write it back with something like
> adb push cramfs.mod.img /
> adb shell
Then write over the old partition. However, you shouldn't write over a mounted file system so
# umount /dev/block/nandi
Then write over it.
# dd if=/cramfs.mod.img of=/dev/block/nandi bs=4k
Then reboot
# shutdown -r now
And see what happens.
Click to expand...
Click to collapse
Wow that was very detailed. I thought I might have to do something like that. Thanks so much again. I'll try this in the morning since it's getting very late here. I'll go ahead and download a linux livecd tonight.
I want to set the cache folder of Google Music to the external sdcard using mount -o bind command
I created a file (without extension) that contains the following
Code:
#!/system/bin/sh
mount -o bind /emmc/Android/data/com.google.android.music/ /sdcard/Android/data/com.google.android.music/
I made sure the target folder exists and saved the file to /system/etc/init.d, but in fact it looks like the script isn't executed.
P.S. the script file's properties are: -rwxr-xr-x, Owner: 00000 root, Group: 02000 shell.
Storing permanent data
How?
I have a xperia u, which has not external SD card slot..
Data partition is MUCH bigger than what I need (I'm using 500mb of 2gb) and I want to move obb files to data partition to free some space in SD partition..
Is that possible?
You might try to move the file to the data partition and then create a symlink where the file was originally.
From a shell with root access:
# ln -s /your/data/partition/filename.obb /original/place/filename.obb
I'm doing the same moving apk and dalvik-cache but I have the problem that after reboot files are still there but the app is disabled.
You can check it here: http://forum.xda-developers.com/showthread.php?t=2597924
I would suggest to try it on an app that it's not important for the system and I don't assume any responsability
P.S.
partition where you create symlink must be ext2/3/4
I think I understand how this works.. Lets say symlinks are some kind of 'windows direct access' for files that can be recognized by the system.. Am I right?
How can I figure out what format are my partitions?
I want to move /mnt/sdcard/Android/obb/com.package.name/file.obb to /data/data/com.package.name/file.obb
Assuming that partitions are in the correct format, I'll have to move files with a root file browser, then connect phone with debug on and type this:
-adb shell
-su
-ln -s /data/data/com.package.name/file.obb /mnt/sdcard/Android/obb/com.package.name/file.obb
Is that ok?
Yest that's the use, I don't know about "windows direct access" because I'm linux user
To check how is your partition formatted there are different ways from console but I just tried this app and it works:
https://play.google.com/store/apps/details?id=com.cls.partition
If both partitions are ext2/3/4 remember also to set the same user, group and permissions, you can do that copying the file from shell.
The whole sequence should look like this:
Code:
$ adb shell
$ su
# cp -a /mnt/sdcard/Android/obb/com.package.name/file.obb /data/data/com.package.name/file.obb
# rm /mnt/sdcard/Android/obb/com.package.name/file.obb
# ln -s /data/data/com.package.name/file.obb /mnt/sdcard/Android/obb/com.package.name/file.obb
cp - a to copy preserving permissions and rm to remove the file.
/data is ext4.. /mnt/sdcard is vfat D=
No symlink then
I never used it but you can still mount bind folders (not files) in fat, something similar to symlink:
Code:
$ adb shell
$ su
# mkdir /data/data/com.package.name/obb/
# cp -a /mnt/sdcard/Android/obb/com.package.name/* /data/data/com.package.name/[B]obb/[/B]
# rm -r /mnt/sdcard/Android/obb/com.package.name/*
# mount -o bind /data/data/com.package.name/[B]obb/[/B] /mnt/sdcard/Android/obb/com.package.name/
if it works you need to find a way to excute that on boot maybe with a init script.
And if there is not crucial data you could even bind all the obb folder together like:
Code:
# mount -o bind /data/data/com.package.name/[B]obb/[/B] /mnt/sdcard/Android/obb/
You can also check this thread:
http://forum.xda-developers.com/showthread.php?t=1410262
Double check everything because I never tried it
Is it possible to add init.d support to my current rom and execute a sh file from it to initialize bind on boot?
No idea sorry
You can try asking in your phone section: http://forum.xda-developers.com/xperia-u
I found how to add init.d support!
Not sure if it works for any device/rom/kernel, but it worked for my Xperia U with GingerBeanSS v3.5 (Sony GB based)..
If anyone is interested, go to this link: http://forum.xda-developers.com/showthread.php?p=32716432
Now I suppose I can create a "BindOBB.sh" with the script you mentioned before in any place of /system, and make a "bindobb" file in /system/etc/init.d/ to execute that script..
So theoretically binding folders should work on every boot!
I used windows my entire life.. I'm not completely sure about linux scripts..
Sorry about making so much questions!
I really appreciate your help!
No problem I'm glad if I can help.
Init script is usually named starting with two numbers like: 00script, 20script, 99script that should give the order scripts are excuted.
For the script itself you need to follow the sample you donwloaded so it will be something like this:
Code:
#!/system/bin/sh
#Comment
busybox mount -o bind /data/data/obb/ /mnt/sdcard/Android/obb/
This is to mount all obb folder or, if you want to mount only some, you can write them all in the script or keep a list of packages in another file and make the script read that.
Remember to make a backup and you might try first with only one package
Ok, I've understood everything (thanks google! ) and done it..
mount -o bind[...] isn't executed by init script.. Maybe a syntax error as it is my first time doing it..
The same command (without 'busybox' at first, of course) seems to work via ADB, because in SolidExplorer when I go to obb folder BEFORE running the script it is empy, but after running it all packages' folders and files appear!
Now problem is that when running a game that need obb data, it closes by itselfs (no FC nor 'missing data' warning)..
Same problem with a 3rd party TTS engine that needs obb data too..
The first problem could be that when you try to execute the command partitions are not mounted yet. Check 00 script used to test if init is enabled to mount them.
Another solution could be to use a sleep command to make the script wait some seconds but the first one should do the trick.
For the second problem check permissions. You copied files as root so you need to be sure the apps can access those files as well, in fat system there is no use of users, group and permissions but moving to ext you need to check that.
To be sure you can set obb folder and all files an directories inside as 777 (rwx for all)
Let me know if it's working
Sent from my ZP980 using Tapatalk
NeriL said:
I want to move /mnt/sdcard/Android/obb/ to /data/data/
Click to expand...
Click to collapse
you can easy create a directory bind using luckypatcher with the folder with obb and the folder where you would like to put it
remember to reboot or rescan your sd else it wont work
i use it to play asphalt and fifa
MrCrayon said:
The first problem could be that when you try to execute the command partitions are not mounted yet. Check 00 script used to test if init is enabled to mount them.
Another solution could be to use a sleep command to make the script wait some seconds but the first one should do the trick.
For the second problem check permissions. You copied files as root so you need to be sure the apps can access those files as well, in fat system there is no use of users, group and permissions but moving to ext you need to check that.
To be sure you can set obb folder and all files an directories inside as 777 (rwx for all)
Let me know if it's working
Sent from my ZP980 using Tapatalk
Click to expand...
Click to collapse
I deleted my custom init script and wrote following command at the last line of '00test' script:
busybox mount -o bind /data/obb/ /mnt/sdcard/Android/obb/
Mount then worked fine
(By the way, my custom script was named '99bindobb', so it was supposedly executed after everything else)
Also checked permissions: /data/obb/ and com.package.name folders inside it were rwxrwxrwx, but files inside were rw-------!
Changed permission of files to rwxrwxrwx..
Now everything works flawlessly at each boot!
Thank you so much! =D =D
You saved about 500Mb of my 4Gb!
And also I learned a lot about linux scripts, busybox and file system permissions!
You are welcome
For the 99 script that only define the order between the user init scripts so it still depends when they are called during boot.
Enjoy the power of Linux
Sent from my ZP980 using Tapatalk
Hi MrCrayon..! I'm here again
I changed rom and did the same as before to use /data insted of /mnt/sdcard for apps files..
This is exactly what I did:
I copied the script I used to sd (my edited 00test), changed rom (switched from Sony based GB rom to Sony Stock ICS rom), added init.d support (/data/Test.log indicates that it works), copied script to /system/etc/init.d/, changed script permissions to 777, created folders /data/AndroidData/ and /data/obb/ with 777 permissions and moved files from sd folders to custom folders in /data..
Finally updated busybox just in case
Script doesn't work, but executing 'mount -o bind' commands from ADB does! How can I fix that?
This is my init script:
#!/system/bin/sh
#Init.d Test
if [ -e /data/Test.log ]; then
rm /data/Test.log
fi
echo Ryuinferno @ XDA 2013 > /data/Test.log
echo Init.d is working !!! >> /data/Test.log
busybox mount -o bind /data/obb/ /mnt/sdcard/Android/obb/
busybox mount -o bind /data/AndroidData/ /mnt/sdcard/Android/data/
busybox set_perm_recursive(0, 0, 0777, 0777, /data/AndroidData, /data/obb)
Hello all,
I'm trying to delete a system file using the Android terminal (as my end goal is to put it in a run shell task in Tasker) and it either reboots my phone or just doesn't delete.
Long story short, I'm using the Weak Sauce root method, but I do not have S-Off as I like how easy it is to undo the Weak Sauce root alone. This means, of course, I don't have immediate RW access to system. So here's what I've done:
Code:
# mount -o rw,remount -t yaffs2 /dev/block/mmcblk0p46 /system
# busybox rm -f /system/media/audio/ui/camera_click.ogg
# mount -o ro,remount -t yaffs2 /dev/block/mmcblk0p46 /system
When I do the first and last commands alone, the system mounts as RW and RO correctly, confirmed with # mount|grep system. But that middle command is the problem. Sometimes nothing will happen, other times my phone will reboot. I've also tried adding the following before the rm command with no success:
Code:
# chmod 777 /system/media/audio/ui/camera_click.ogg
I AM able to delete the file manually through ES File Explorer when mounted RW. But it comes back after I restart my phone, hence why I want this command to be used in Tasker.
What am I doing wrong?
PS: as for the "why" of deleting the shutter sound file, I take screenshots sometimes and the sound drives me nuts. I've tried removing the ogg file from the camera apk, but that didn't work after a reboot. I also tried replacing the ogg file with a silent one, but no success there either as the real one reloads itself when I restart.
Oh, and full disclosure, I also posted this in the M8 forum. I'm putting it here hoping more people see it and can help!