Related
Okay, so I'm in a bit of a bind. I'm S-OFF, and I tried updating to the global leak and it seems I've lost boot and recovery. Everytime I boot it goes through the splash screen and then a black screen with the phone and green update symbol, then it turns to a red triangle and exclamation mark. any help would be greatly appreciated. I'm fairly experienced and everything i've tried has failed. I tried going into hboot and flashing the PH98IMG again. It took, but still the same result. I tried flashing the recovery in fastboot but it continues to fail, and I also tried flashing my boot.img but it also failed. Any ideas?
tomtripp21 said:
Okay, so I'm in a bit of a bind. I'm S-OFF, and I tried updating to the global leak and it seems I've lost boot and recovery. Everytime I boot it goes through the splash screen and then a black screen with the phone and green update symbol, then it turns to a red triangle and exclamation mark. any help would be greatly appreciated. I'm fairly experienced and everything i've tried has failed. I tried going into hboot and flashing the PH98IMG again. It took, but still the same result. I tried flashing the recovery in fastboot but it continues to fail, and I also tried flashing my boot.img but it also failed. Any ideas?
Click to expand...
Click to collapse
unlock the bootloader and flash a recovery. you need to unlock since you dont have eng commands.
btw this belongs in q&a
antp121 said:
unlock the bootloader and flash a recovery. you need to unlock since you dont have eng commands.
btw this belongs in q&a
Click to expand...
Click to collapse
Thanks I'll give that a try. Will the firmware and ROM still be in place? Will I have do the update again? BTW Sorry for posting it in the wrong section..
tomtripp21 said:
Thanks I'll give that a try. Will the firmware and ROM still be in place? Will I have do the update again? BTW Sorry for posting it in the wrong section..
Click to expand...
Click to collapse
Its OK. And once you unlock, it'll reboot. Then you just go back into the boot loader and flash a recovery with fast boot.
Sent from my aokp_tenderloin using Tapatalk 2
So got the recovery flashed, but now it only boots into the recovery.
tomtripp21 said:
So got the recovery flashed, but now it only boots into the recovery.
Click to expand...
Click to collapse
Did you try flashig a rom?
Sent from my aokp_tenderloin using Tapatalk 2
i tried to restore my backup that didn't work, I haven't tried a new ROM yet. I'll try that and get back to you. Thanks again for all your help.
antp121 said:
Did you try flashig a rom?
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Tried flashing a ROM, the stock deodexed rooted 4.03.605.02. Still boots to recovery...
tomtripp21 said:
Tried flashing a ROM, the stock deodexed rooted 4.03.605.02. Still boots to recovery...
Click to expand...
Click to collapse
You need to use interface to fastboot boot.img then run firmware update for old firmware n old CWR. BASICALLY GO BACK TO STOCK REZOUND N START THE WHOLE PROCESS OVER LIKE DAY 1!
Good news is you don't need to do the wire trick again. Your phone crashed during the firmware upgrade now its stuck in limbo n doesn't know how to handle the 2 sets of hardware commands its receiving from the CMOS.
[Q] Can only get into recovery after attempting Juopunutbear S-OFF
I wanted to S-OFF after being stock locked, with the OTA ICS update. I performed HTC dev unlock successfully. After that, I may have gone wrong during one of several steps.
-Pushed AmonRa recovery 3.15 to my phone (seemed to be successful)
-Flashed ICE-EnableRoot.img (got an error message saying it was unsuccessful, but when I rebooted my phone, SuperUser was installed).
-Flashed vigorOTAStockRooted.zip (because I wanted to try the S-OFF method from stock GB rom)
-Ran HTC Rezound S-OFF Kit By Hasoon2000
-Made sure HTC Drivers were installed
-Enabled USB Debugging
-Put in blank SD Card
-Run Juopunutbear v.6 If You Are On Gingerbread
After running Juopunutbear v.6 for Gingerbread, my phone screen went blank and HTC's splash screen came up momentarily, and then my phone screen went dark. The cmd box that popped up then gave me an error message saying I had to install the HTC Drivers. I went to HTC's website to download the drivers. When I tried to install them, I was told they were already installed.
I can reboot my phone into Hboot and AmonRa recovery and I can do anything from there. But when I try to start my phone, I get the HTC splash screen and then black screen. The orange LED lights up when my phone is powered off and plugged in via USB. When I try to boot from Hboot, I either get a static HTC splash screen or splash screen going to a black screen.
This is what my Hboot screen reads:
*** TAMPERED ***
*** UNLOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
Open DSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012,16:47:46
Any advise would be greatly appreciated! Thank you!
jtayag said:
I wanted to S-OFF after being stock locked, with the OTA ICS update. I performed HTC dev unlock successfully. After that, I may have gone wrong during one of several steps.
-Pushed AmonRa recovery 3.15 to my phone (seemed to be successful)
-Flashed ICE-EnableRoot.img (got an error message saying it was unsuccessful, but when I rebooted my phone, SuperUser was installed).
-Flashed vigorOTAStockRooted.zip (because I wanted to try the S-OFF method from stock GB rom)
-Ran HTC Rezound S-OFF Kit By Hasoon2000
-Made sure HTC Drivers were installed
-Enabled USB Debugging
-Put in blank SD Card
-Run Juopunutbear v.6 If You Are On Gingerbread
After running Juopunutbear v.6 for Gingerbread, my phone screen went blank and HTC's splash screen came up momentarily, and then my phone screen went dark. The cmd box that popped up then gave me an error message saying I had to install the HTC Drivers. I went to HTC's website to download the drivers. When I tried to install them, I was told they were already installed.
I can reboot my phone into Hboot and AmonRa recovery and I can do anything from there. But when I try to start my phone, I get the HTC splash screen and then black screen. The orange LED lights up when my phone is powered off and plugged in via USB. When I try to boot from Hboot, I either get a static HTC splash screen or splash screen going to a black screen.
This is what my Hboot screen reads:
*** TAMPERED ***
*** UNLOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
Open DSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012,16:47:46
Any advise would be greatly appreciated! Thank you!
Click to expand...
Click to collapse
For starters, you are on ics firmware so you should run the ics version of juopunutbear. I suggest flashing a rooted Rom based on the ota and then try again.
Sent from my ADR6425LVW using Tapatalk 2
topgun1953 said:
For starters, you are on ics firmware so you should run the ics version of juopunutbear. I suggest flashing a rooted Rom based on the ota and then try again.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I successfully flashed one of the stock ICS ROMs! What got me all confused to begin with was the prerequisite that I had to be on a stock Gingerbread ROM or the 3.14.605.5 ICS leak. That's why I tried flashing the original Vigor GB ROM on my phone. I still want to get S-OFF, but I need to read the instructions more carefully. Thanks for your help!
dragonstalker said:
You need to use interface to fastboot boot.img then run firmware update for old firmware n old CWR. BASICALLY GO BACK TO STOCK REZOUND N START THE WHOLE PROCESS OVER LIKE DAY 1!
Good news is you don't need to do the wire trick again. Your phone crashed during the firmware upgrade now its stuck in limbo n doesn't know how to handle the 2 sets of hardware commands its receiving from the CMOS.
Click to expand...
Click to collapse
So I just need to flash my backed up boot.img, and then flash the 3.14.605.12 RUU? Then re-root and retry the OTA Global Update?
tomtripp21 said:
So I just need to flash my backed up boot.img, and then flash the 3.14.605.12 RUU? Then re-root and retry the OTA Global Update?
Click to expand...
Click to collapse
pretty much. From looking at everything looks like you are on ICS, but its not letting you reprogram. usually happens when an update fails. When you run Juonobear and run the ics upgrade over again, it should reboot like 3 or 4 times. Sounds like you never let the process finish. Final note, i'm not sure where you got your firmware from, but your radios do not look familiar. Not saying they are wrong, just not radio's i've ever seen flashed. BUT, I don't usually change radio's unless there is a huge need for it. you should be on radio's 10r/08r that come with the original ICS firmware update. I'll watch the thread throughout the day to lend support where I can. Hope this helps.
dragonstalker said:
pretty much. From looking at everything looks like you are on ICS, but its not letting you reprogram. usually happens when an update fails. When you run Juonobear and run the ics upgrade over again, it should reboot like 3 or 4 times. Sounds like you never let the process finish. Final note, i'm not sure where you got your firmware from, but your radios do not look familiar. Not saying they are wrong, just not radio's i've ever seen flashed. BUT, I don't usually change radio's unless there is a huge need for it. you should be on radio's 10r/08r that come with the original ICS firmware update. I'll watch the thread throughout the day to lend support where I can. Hope this helps.
Click to expand...
Click to collapse
Now I'm a little confused, sorry. I need to run the juopunutbear program again? My radios are 2.22.10.0801r/2.22.10.0803r, Hboot 2.27. I'm downloading the .12 RUU from Android Police. I've tried re-flashing the boot.img from my nand backup, but it keeps saying:
C:\mini-adb_vigor>fastboot flash boot.img
unknown partition 'boot.img'
error: cannot determine image filename for 'boot.img'
edit: I fixed the flash, I forgot to add the partition in the command, duh... So I flashed my backed up boot.img, now I just need to flash the .12 RUU?
I have the backup img in the file where I have fastboot, adb, etc.. What am I doing wrong?
tomtripp21 said:
Now I'm a little confused, sorry. I need to run the juopunutbear program again? My radios are 2.22.10.0801r/2.22.10.0803r, Hboot 2.27. I'm downloading the .12 RUU from Android Police. I've tried re-flashing the boot.img from my nand backup, but it keeps saying:
C:\mini-adb_vigor>fastboot flash boot.img
unknown partition 'boot.img'
error: cannot determine image filename for 'boot.img'
edit: I fixed the flash, I forgot to add the partition in the command, duh... So I flashed my backed up boot.img, now I just need to flash the .12 RUU?
I have the backup img in the file where I have fastboot, adb, etc.. What am I doing wrong?
Click to expand...
Click to collapse
I have now tried to flash the .12 RUU in Hboot but it will not flash it, probably because my firmware is newer right? Back to the drawing board....
Still to no avail I am getting nowhere. I flashed the stock recovery and did a factory reset from Hboot. Nothing, I have tried flashing the newest RUU, nothing, I'm flashed back to ra-recovery. Can anybody give me a solution step by step to get a ROM loaded and booting?
Well I finally got it up and working. I loaded the old firmware and was able to restore by backup. Thanks to all who chimed in with helpful advice. I'm hesitant to retry the Global update, but I might go ahead and give it another shot.
Glad you figured to restore the firmware. It's not hard to flash the global. Run the firmware, then run the recovery then flash Rom. Do it right in that order n you don't have any issues. Use 2 sdcards if you need to because the firmware upgrade won't delete the ph98 off your card. You will need to do it manually.
Sent from ICS REZOUND S-OFF
long story short i have to send in my phone for repairs i was trying to get rid of my custom rom and install a stock rom but some how i wiped out the entire phone i do however managed to get twrp recovery but can't really do much in there as no files are in my phone and it wont let me side load the stock rom help please?
Ok now dont panic !
Does your phone still have eat least 70% of battery left ? if yes then reboot into the bootloader and relock it and then run the RUU file whitch will return your phone back to stock,and for more detailed info im sry beacuse im currenty on my phone
Sent from my HTC One X using xda premium
Lord_Xovon said:
long story short i have to send in my phone for repairs i was trying to get rid of my custom rom and install a stock rom but some how i wiped out the entire phone i do however managed to get twrp recovery but can't really do much in there as no files are in my phone and it wont let me side load the stock rom help please?
Click to expand...
Click to collapse
if your hboot is 1.40 - there is no stock ROM available.
You need to sideload some other custom ROM.
i face same problem
was trying to get rid of my custom rom and install a stock rom but some how i wiped out the entire phone i do however managed to get twrp recovery but can't really do much in there as no files are in my phone and it wont let me side load the stock rom help please?
now my fone stop on htc logo
plz help help
i try found same ruu file but not found plz help
ENRC2B_U pvt ship s-on rl
hboot_1.35.0000
cpld_none
microp_none
raido-3.1204.168.32
emmc-bootmode:disabled
cpu-bootmode:disabled
hw secure boot:disabled
modem path : off
nov 14 2012, 16:38:06
soy2 said:
i face same problem
was trying to get rid of my custom rom and install a stock rom but some how i wiped out the entire phone i do however managed to get twrp recovery but can't really do much in there as no files are in my phone and it wont let me side load the stock rom help please?
now my fone stop on htc logo
plz help help
i try found same ruu file but not found plz help
ENRC2B_U pvt ship s-on rl
hboot_1.35.0000
cpld_none
microp_none
raido-3.1204.168.32
emmc-bootmode:disabled
cpu-bootmode:disabled
hw secure boot:disabled
modem path : off
nov 14 2012, 16:38:06
Click to expand...
Click to collapse
Unlock bootloader
Install TWRP 2.6 etc...
use adb sideload <rom.zip> to sideload the custom ROM
try it a number of times as it takes time to get recognized...
flash the kernel
Addicted2xda said:
Unlock bootloader
Install TWRP 2.6 etc...
use adb sideload <rom.zip> to sideload the custom ROM
try it a number of times as it takes time to get recognized...
flash the kernel
Click to expand...
Click to collapse
I have the same issue i unlocked and rooted my phone and went to flash a custom ROM when something went wrong...long story short i ended up wiping my entire phone, i relocked the phone and tried to flash the factory RUU using the all in one toolkit but i couldnt find and RUU.zip file please help
Everything you need to fix your device is here
Read and search. This has been covered 1000000 times.
brenntard said:
I have the same issue i unlocked and rooted my phone and went to flash a custom ROM when something went wrong...long story short i ended up wiping my entire phone, i relocked the phone and tried to flash the factory RUU using the all in one toolkit but i couldnt find and RUU.zip file please help
Click to expand...
Click to collapse
What is your hboot version?
I hope you have Android SDK installed and running in your system?
I guess I have just run into the same issue. I wasn't able to find any help in the "Device Essentials" thread, unfortunately.
I have no rom. ADB doesnt work when phone is in bootloader or recovery (twrp 2.6.3.0) and I can't mount the usb storage to get the rom onto my phone. I miss the days of my samsung captivate....It was so easy!! Thanks for reading.
I guess the key point here is that I can't sideload anything because adb isnt working in recovery. My hboot is 1.40.
1 25664338
TheJokah said:
Everything you need to fix your device is here
Read and search. This has been covered 1000000 times.
Click to expand...
Click to collapse
Thank you but those links on that page do not work
brenntard said:
Thank you but those links on that page do not work
Click to expand...
Click to collapse
Which version do you have ATT-Telus or International?
Did you try one of the toolkits like Windroid or Hasoons Toolkit. I would use Hasoon2000's first to return device to stock condition, and then try Windroid if that does not work.
TheJokah said:
Which version do you have ATT-Telus or International?
Did you try one of the toolkits like Windroid or Hasoons Toolkit. I would use Hasoon2000's first to return device to stock condition, and then try Windroid if that does not work.
Click to expand...
Click to collapse
i have the AT&T version with hasoons att htc one x all in one toolkit downloaded. i tried returning it to stock from hasoons toolkit but to no evail... when i go to reboot and twrp and try to reboot the system it tells me i have no os installed and asks if i want to continue so i went ahead and rebooted anyway even though it said no os installed, it then came up with a message saying i am not rooted anymore and do i want to install supersu...i am very confused
brenntard said:
i have the AT&T version with hasoons att htc one x all in one toolkit downloaded. i tried returning it to stock from hasoons toolkit but to no evail... when i go to reboot and twrp and try to reboot the system it tells me i have no os installed and asks if i want to continue so i went ahead and rebooted anyway even though it said no os installed, it then came up with a message saying i am not rooted anymore and do i want to install supersu...i am very confused
Click to expand...
Click to collapse
did you try and install supersu just for the hell of it?? You may want to install stock recovery, then re-lock bootloader, and then use RUU. This almost always get your device back to stock.:good:
TheJokah said:
did you try and install supersu just for the hell of it?? You may want to install stock recovery, then re-lock bootloader, and then use RUU. This almost always get your device back to stock.:good:
Click to expand...
Click to collapse
Yes i tried to install it just to see what would happen...my hpone rebooted and got stuck at the HTC quietly brilliant screen. so i should relock the phone and run the RUU? even if i dont have an os installed this will bring me back to stock? meaning i can use my phone again?
brenntard said:
Yes i tried to install it just to see what would happen...my hpone rebooted and got stuck at the HTC quietly brilliant screen. so i should relock the phone and run the RUU? even if i dont have an os installed this will bring me back to stock? meaning i can use my phone again?
Click to expand...
Click to collapse
yes it will put one there for you then you can unlock, install twrp or CM, and then custom rom. Profit! :highfive:
See, my issue is that I cant go back to a stock rom because my hboot 1.40....
copying to TWRP
parkerdjohnson said:
See, my issue is that I cant go back to a stock rom because my hboot 1.40....
Click to expand...
Click to collapse
I can send you a link in pm to send your costom or stock rom to TWRP but it may still not work to install. ask how I know about that? Coz I totally have the same problem and cant get rid of it for days. my hboot is 1.32 and I have the all in one toolkit.
İF anyone can help me about finding the right RUU for my htc one x+ (cid: cws-001) and how to go back to stock recovery I would be greatful.
Thankss
parkerdjohnson said:
See, my issue is that I cant go back to a stock rom because my hboot 1.40....
Click to expand...
Click to collapse
Im also on HBOOT 1.4 I believe you need this RUU.
I am going to revert to stock to make sure you can use this. Please just make sure what cid # you have. It should be CWS_001 for ATT Branded.(like mine )
edit: RUU ran fine with HBOOT 1.40
---------- Post added at 05:25 PM ---------- Previous post was at 05:20 PM ----------
[/COLOR]
sahtaan_yusuf said:
I can send you a link in pm to send your costom or stock rom to TWRP but it may still not work to install. ask how I know about that? Coz I totally have the same problem and cant get rid of it for days. my hboot is 1.32 and I have the all in one toolkit.
İF anyone can help me about finding the right RUU for my htc one x+ (cid: cws-001) and how to go back to stock recovery I would be greatful.
Thankss
Click to expand...
Click to collapse
You need to have this stock recovery installed. then relock bootloader, and then run this RUU
this should fix it. if that RUU does not work, try the link to the RUU I gave for parkerdjohnson
Thanks
thanks so much for the links my brother, I am downloading the RUU links but the stock recovery link doesnt work. do you have another one? or I have the all in one tool kit, do I have the chance to go back to stock recovery by using this toolkit?
sahtaan_yusuf said:
thanks so much for the links my brother, I am downloading the RUU links but the stock recovery link doesnt work. do you have another one? or I have the all in one tool kit, do I have the chance to go back to stock recovery by using this toolkit?
Click to expand...
Click to collapse
i attached a .zip file with the recovery inside. THIS IS NOT FLASHABLE! You need to flash from fastboot or with an All in one.
edit:
I uploaded the wrong file :banghead: I will try to find the right one. Sorry
Edit 2:
found the file and uploaded.
Hi People,
I have to admit life with my finger print scanner has been great
But I want to put my HTC One max completely back to stock. Rom, Kernal, recovery, the lot.
Just one problem i can not find the original RUU for the phone. I must have deleted it or something :crying:
The details of my device are attached.
As far as i am aware i am still using the original ROM that came with phone.
All i have done was unlocked the bootloader, flashed a custom recovery (CWM) and then managed to lock my boot loader using firewater.
I am now S-off but like i said i want it back to stock completely.
Can someone please help me out again by letting me know how to do a back to stock and where i can find a stock RUU
Thanks again
Is this the Ruu your looking for
http://forum.xda-developers.com/showthread.php?t=2643973
Sent from my HTC6600LVW using XDA Premium 4 mobile app
thayl0 said:
Is this the Ruu your looking for
http://forum.xda-developers.com/showthread.php?t=2643973
Sent from my HTC6600LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
@thay10
thanks for getting back to me.
I'm not sure if this ruu is ok for me to use as its a 708. and the one i have is a 401
I do not believe there is an ruu for 1.54.401.1,just the custom rom that was posted
htct6 said:
Hi People,
I have to admit life with my finger print scanner has been great
But I want to put my HTC One max completely back to stock. Rom, Kernal, recovery, the lot.
Just one problem i can not find the original RUU for the phone. I must have deleted it or something :crying:
The details of my device are attached.
As far as i am aware i am still using the original ROM that came with phone.
All i have done was unlocked the bootloader, flashed a custom recovery (CWM) and then managed to lock my boot loader using firewater.
I am now S-off but like i said i want it back to stock completely.
Can someone please help me out again by letting me know how to do a back to stock and where i can find a stock RUU
Thanks again
Click to expand...
Click to collapse
Wonders_Never_Cease said:
I do not believe there is an ruu for 1.54.401.1,just the custom rom that was posted
Click to expand...
Click to collapse
Hey,
thanks for that.
I cant believe that the original RUU does not exist.
Oh well that's me screwed then :silly:
You can restore a CWM backup of 1.54.401.1 and then flash a stock 1.54.401.1 recovery in fastboot and then factory reset your phone in Stock Recovery. This will take your phone back to stock state and you'll be able to receive OTA for 4.4 also.
All you need a stock nandroid backup of 1.54.401.1 and stock recovery.
Sent from my HTC One max using XDA Premium 4 mobile app
farazhassankhan said:
You can restore a CWM backup of 1.54.401.1 and then flash a stock 1.54.401.1 recovery in fastboot and then factory reset your phone in Stock Recovery. This will take your phone back to stock state and you'll be able to receive OTA for 4.4 also.
All you need a stock nandroid backup of 1.54.401.1 and stock recovery.
Sent from my HTC One max using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey farazhassankhan,
Thanks for the info. I have done everything apart from the factory reset from the stock recovery. I've flashed the stock recovery on the phone. But I have no idea how to do this, as all that shows up while I'm in the stock recovery is a picture of a phone with a red triangle with an exclamation mark though it. Is there a way to access a menu or something?
htct6 said:
Hey farazhassankhan,
Thanks for the info. I have done everything apart from the factory reset from the stock recovery. I've flashed the stock recovery on the phone. But I have no idea how to do this, as all that shows up while I'm in the stock recovery is a picture of a phone with a red triangle with an exclamation mark though it. Is there a way to access a menu or something?
Click to expand...
Click to collapse
Yes, there is a way. Click on "Recovery" in bootloader and wait untill it passes htc screen. Then press "volume up" and power button couple of times and then keep pressing Volume up.
There will be a message:
mount SD Card failed 1
mount SD Card failed 2
mount SD Card failed 3
mount SD Card failed 4
mount SD Card failed 5
and there must be a Stock Recovery menu (in blue) on your screen and there you can factory rest your One Max.
Please bear in mind that factory reset will wipe all your date (inculding media file such as pictures/songs/downloads etc) from phone and you'll have to set up your pbone again
You should be able to receive 4.4 OTA (if available for your region yet)
Sent from my HTC One max using XDA Premium 4 mobile app
farazhassankhan said:
Yes, there is a way. Click on "Recovery" in bootloader and wait untill it passes htc screen. Then press "volume up" and power button couple of times and then keep pressing Volume up.
There will be a message:
mount SD Card failed 1
mount SD Card failed 2
mount SD Card failed 3
mount SD Card failed 4
mount SD Card failed 5
and there must be a Stock Recovery menu (in blue) on your screen and there you can factory rest your One Max.
Please bear in mind that factory reset will wipe all your date (inculding media file such as pictures/songs/downloads etc) from phone and you'll have to set up your pbone again
You should be able to receive 4.4 OTA (if available for your region yet)
Sent from my HTC One max using XDA Premium 4 mobile app
Click to expand...
Click to collapse
@japodude & @farazhassankhan
Just want to say a massive thanks to you both @japodude for uploading your stock nandroid back up and @farazhassankhan for helping me get back to complete stock.
Massive :good: thank you
your very welcome. glad i could help someone.
No Problem bro. XDA Community is all about helping each others. Cheers.
Sent from my HTC One max using XDA Premium 4 mobile app
farazhassankhan said:
You can restore a CWM backup of 1.54.401.1 and then flash a stock 1.54.401.1 recovery in fastboot and then factory reset your phone in Stock Recovery. This will take your phone back to stock state and you'll be able to receive OTA for 4.4 also.
All you need a stock nandroid backup of 1.54.401.1 and stock recovery.
Click to expand...
Click to collapse
I want go back stock rom, i got installed Unsecure Kernel and SuperSU but my phone just stay on BOOT logo.
I can't do S-OFF cuz said "ERROR: run rumrunner again and READ (no adb connection to device. Debugging on
Drivers?)
Press ENTER to exit"
I just want go back to stock and use my phone :crying:
Details:
-Htc one max international version.
-OS-2.61.708.1
-Radio-4T.24.3218.09
-T6UL PVT SHIP S-ON RH
I am new on this, please if u can. HELP ME!
Spar1900 said:
I want go back stock rom, i got installed Unsecure Kernel and SuperSU but my phone just stay on BOOT logo.
I can't do S-OFF cuz said "ERROR: run rumrunner again and READ (no adb connection to device. Debugging on
Drivers?)
Press ENTER to exit"
I just want go back to stock and use my phone :crying:
Details:
-Htc one max international version.
-OS-2.61.708.1
-Radio-4T.24.3218.09
-T6UL PVT SHIP S-ON RH
I am new on this, please if u can. HELP ME!
Click to expand...
Click to collapse
Oh mate i feel for you i know that feeling very well.
I used Firewater to s-off.
I then flashed a stock nandroid backup kindly provided in this thread. Then flashed stock recovery.
Chances are its the unsecure kernal causing this boot loop. I'm not an expert though. there is a 708 stock rom on somewhere on these forums
so you could try flashing that to the phone.
I'm sure you will get it sorted with the help of the kind people on here.
Spar1900 said:
I want go back stock rom, i got installed Unsecure Kernel and SuperSU but my phone just stay on BOOT logo.
I can't do S-OFF cuz said "ERROR: run rumrunner again and READ (no adb connection to device. Debugging on
Drivers?)
Press ENTER to exit"
I just want go back to stock and use my phone :crying:
Details:
-Htc one max international version.
-OS-2.61.708.1
-Radio-4T.24.3218.09
-T6UL PVT SHIP S-ON RH
I am new on this, please if u can. HELP ME!
Click to expand...
Click to collapse
try flashing the boot.imgvfrom the nandroid backup i shared.
or is it because you did have kitkat as your bootloader shows os 2.61.708.1. is the stock 1.54.401 conflicting with what hboot says stopping it?
install twrp recovery and install virtuous one max 2.0.2. least your phone will come back on hopefully.
japodude said:
try flashing the boot.imgvfrom the nandroid backup i shared.
or is it because you did have kitkat as your bootloader shows os 2.61.708.1. is the stock 1.54.401 conflicting with what hboot says stopping it?
install twrp recovery and install virtuous one max 2.0.2. least your phone will come back on hopefully.
Click to expand...
Click to collapse
I can install Virtuos with no S-OFF? I am S-ON i i cant S-OFF i dont know why.
--------EDIT--------
Dude, i flash this boot.img "dont let me upload the link haha" (i can send u too PM) and work perfect, now i do S-OFF with Firewater and works too.
Boot loop, atm solved. Now i will go recover Fingerprint Scanner.
Thanks for all @japodude, i will comment in a few minutes, and i will upload my backups!
Spar1900 said:
I can install Virtuos with no S-OFF? I am S-ON i i cant S-OFF i dont know why.
--------EDIT--------
- I am downloading Virtuos.
- My HBOOT version is 2.49
- I tried install your boot.img but same boot loop.
Click to expand...
Click to collapse
my Hboot is 2.47.0000.
i think thats you problem, the hboot is too new for the stock 1.54.401. i used firewater on hboot 2.47 to gain s-off. dont know if firewater works on hboot 2.49
unless you get s-off, i don't think you can downgrade the hboot. fingers crossed the virtuous rom should work for you my friend. as virtuous is based on the ota, in theory it should be fine with your hboot.
your best bet might be to get the boot.img from the ota for your region.
japodude said:
my Hboot is 2.47.0000.
i think thats you problem, the hboot is too new for the stock 1.54.401. i used firewater on hboot 2.47 to gain s-off. dont know if firewater works on hboot 2.49
unless you get s-off, i don't think you can downgrade the hboot. fingers crossed the virtuous rom should work for you my friend. as virtuous is based on the ota, in theory it should be fine with your hboot.
your best bet might be to get the boot.img from the ota for your region.
Click to expand...
Click to collapse
SOLVED, i am so happy now and i can say that I love u hahahahaha! I flash the Boot.img from Virtous and work fine. Thanks for all dude.
In a few minutes i will upload my backups!
Spar1900 said:
SOLVED, i am so happy now and i can say that I love u hahahahaha! I flash the Boot.img from Virtous and work fine. Thanks for all dude.
In a few minutes i will upload my backups!
Click to expand...
Click to collapse
glad you got it working. be interesting to see if firewater works with your hboot. ps, i used firewater on stock kernel just rooted
japodude said:
glad you got it working. be interesting to see if firewater works with your hboot. ps, i used firewater on stock kernel just rooted
Click to expand...
Click to collapse
S-OFF work perfectly on my HBOOT 2.49 using Firewater.
Spar1900 said:
S-OFF work perfectly on my HBOOT 2.49 using Firewater.
Click to expand...
Click to collapse
sweet! now you can do whatever you want :good:
Ok I am having a weird issue with my phone now which seems to be totally different than all stories people have posted.
All people that have posted similar problems can't boot the phone and it gets stuck at the HTC screen when booting and they mentioned they can't use USB and some can't even charge the phone.
But for my case, after the HTC screen the mobile loads in the lock mode, showing only the clock and at the top left where the notifications are it is showing a warning mark but I can't read it cause phone is locked of course.
The USB connection works and luckily the USB debugging is enabled so I can have access to the phone through USB, but the problem is that I am stuck there, when I try to unlock the phone by pulling the window up, the HTC green loading screen comes instead and then it gets stuck there. but still the USB connection is working fine.
But after a short time which is 1 or 2 minutes, the phone restarts itself and then boots up again and does the same thing into an infinite loop until I shut it down.
I have the phone saying on boot loader Tampered, Unlocked but sadly its showing S-On
I have tried all the ways to make it S-OFF to try and lock the bootloader and remove the tamper so maybe it would help booting but I Can't get it to S-OFF.
The reasons are that my Hboot version is 2.46 and the android version is 4.3 so the only 2 working S-OFF programs for my versions are rumrunner and firewater.
For firewater I can't use it as it requires internet connection, but as I statted I Can't access the phone at all and it doesn't connect to wifi or even my SIM.
Rumrunner I have tried it, but the problem is when rumrunner gets to the "test 2" phase it takes long and the phone restarts itself before it manages to finish resulting in a CCCC error and ending the rumrunner program.
I remember what created the problem, I was trying to fix the fingerprint sensor and I RELOCKED the booter with oem through htcdev to see if it would help, after that when I went in bootloader it showed TAMPERED, RELOCKED and SECURITY WARNING, I got really scared so I unlocked the phone again with the unlock bin and it went back to normal and the security warning was gone, but from there the problem started.
I have tried wiping the cahce and all data and doing factory reset then I tried installing new ROMs but it didn't work for some reason.
I downloaded the kitkat rom and the jelly bean 4.2.2 ROM and tried both of them, it installs fine and everything is ok but the problem doesn't go and what is more weird is that even tho I installed the Jelly bean 4.2.2 ROM thorugh the Recovery screen, the adb still shows that my android version is 4.3 so I still can't use programs like revone or moonshine.
Please help me repair my phone
Does anyone know what can be wrong or what can I do?
I find it weird that even when installing ROMS this problem still occurs as if I never formatted the phone or installed a new ROM.
And still says Android 4.3 regards of what I do.
elbashadodo said:
Does anyone know what can be wrong or what can I do?
I find it weird that even when installing ROMS this problem still occurs as if I never formatted the phone or installed a new ROM.
And still says Android 4.3 regards of what I do.
Click to expand...
Click to collapse
try booting into bootloader then flash the boot.img from there. it sounds as if your boot.img is not flashing from recovery.
fastboot flash boot boot.img
is the command to flash the boot loader from fastboot usb.
nfinitefx45 said:
try booting into bootloader then flash the boot.img from there. it sounds as if your boot.img is not flashing from recovery.
fastboot flash boot boot.img
is the command to flash the boot loader from fastboot usb.
Click to expand...
Click to collapse
I did that and now it gets stuck at HTC without opening the phone at all and can't connect USB to it when its on anymore and now restarts the phone after it gets stuck at HTC after 20 seconds or something.
Now boot to recovery and flash the rom again.
Sent from my A200 using XDA Premium 4 mobile app
nfinitefx45 said:
Now boot to recovery and flash the rom again.
Sent from my A200 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just installed the CM 10.1 Nightlies and still same problem won't boot and stuck at the loading screen
elbashadodo said:
Just installed the CM 10.1 Nightlies and still same problem won't boot and stuck at the loading screen
Click to expand...
Click to collapse
Maybe try running the JB RUU. And where did you find CM for this phone? I have been waiting for that.
JBS976 said:
Maybe try running the JB RUU. And where did you find CM for this phone? I have been waiting for that.
Click to expand...
Click to collapse
I don't know I downloaded it from another site that said it should work for htc one max.
Well I will try the JB RUU and see how it goes.
I am downloading the JB RUU from this thread now http://forum.xda-developers.com/showthread.php?t=2708830
Its gonna take some time my internet is not so fast and its 1.1 GB will let you know after I test
elbashadodo said:
I don't know I downloaded it from another site that said it should work for htc one max.
Well I will try the JB RUU and see how it goes.
Click to expand...
Click to collapse
Ok untill you actually get this booting correctly, stop just trying different roms. You are S-ON this means you will need to boot to bootloader flash the boot.img first then reboot to recovery and flash the rom that came with the boot.img. you should be doing this with a stock rom and boot.img for you specific device to make sure it works correctly.
If this does not work for you , you will need to run the RUU for you specific carrier. You will need to relock your phone in order to do the ruu
If you are just mix matching your **** it will never work correctly.
nfinitefx45 said:
Ok untill you actually get this booting correctly, stop just trying different roms. You are S-ON this means you will need to boot to bootloader flash the boot.img first then reboot to recovery and flash the rom that came with the boot.img. you should be doing this with a stock rom and boot.img for you specific device to make sure it works correctly.
If this does not work for you , you will need to run the RUU for you specific carrier. You will need to relock your phone in order to do the ruu
If you are just mix matching your **** it will never work correctly.
Click to expand...
Click to collapse
Ok will try now
nfinitefx45 said:
Ok untill you actually get this booting correctly, stop just trying different roms. You are S-ON this means you will need to boot to bootloader flash the boot.img first then reboot to recovery and flash the rom that came with the boot.img. you should be doing this with a stock rom and boot.img for you specific device to make sure it works correctly.
If this does not work for you , you will need to run the RUU for you specific carrier. You will need to relock your phone in order to do the ruu
If you are just mix matching your **** it will never work correctly.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2584231
This should work fine right?
Cause I am from Egypt and my HTC One Max is International version.
elbashadodo said:
http://forum.xda-developers.com/showthread.php?t=2584231
This should work fine right?
Cause I am from Egypt and my HTC One Max is International version.
Click to expand...
Click to collapse
Yes if you are the international version. Just follow what it says and this should correct your issues
nfinitefx45 said:
Yes if you are the international version. Just follow what it says and this should correct your issues
Click to expand...
Click to collapse
Ok I have a quick question.
After the download is finished, how will I copy the ZIP file to my phone since it doesn't boot anymore.
Can I do that from the bootloader with fastboot? or do I need to get SD card and a reader to copy the data to it then put it on the phone?
elbashadodo said:
Ok I have a quick question.
After the download is finished, how will I copy the ZIP file to my phone since it doesn't boot anymore.
Can I do that from the bootloader with fastboot? or do I need to get SD card and a reader to copy the data to it then put it on the phone?
Click to expand...
Click to collapse
You need TWRP recovery to install the ROM and i hope you have it already. If not download TWRP and flash it.
In TWRP you have the option to mount your SD card and that should make your phone available as USB on your computer.
---------- Post added at 05:26 PM ---------- Previous post was at 05:25 PM ----------
You may want to flash the stock sense 6 ROM which is available @ http://forum.xda-developers.com/showthread.php?t=2776665
pradeepvizz said:
You need TWRP recovery to install the ROM and i hope you have it already. If not download TWRP and flash it.
In TWRP you have the option to mount your SD card and that should make your phone available as USB on your computer.
---------- Post added at 05:26 PM ---------- Previous post was at 05:25 PM ----------
You may want to flash the stock sense 6 ROM which is available @ http://forum.xda-developers.com/showthread.php?t=2776665
Click to expand...
Click to collapse
Ok I don't know what actually happened but here is how it is.
I had Clockwork mod recovery so I flashed the TWRP you told me from this forums and right after I did and tried to go into recovery, the phone turned OFF and wouldn't get on again, also it showed me a battery with question mark on it so I thought maybe battery went out and it won't charge, after few minutes I found it showing HTC logo screen then it went off and wouldn't boot or open bootloader again.
I tried to press Volume up + power and all of a sudden it booted into the last ROM I installed which was CM 10.1 Nightflies I think and now the phone is working again some how
Ok it turned out to be that the Question mark screen is just the back ground of the TWRP recovery and it needed time to load thats all cause I managed to get into recovery now.
But the weird thing is that installing the TWRP recovery ONLY I didn't install or flash anything else, fixed the phone and its working fine now.
Now its working super fine.
I managed to make it S-OFF with firewater (rumrunner didn't work for me) and I locked it and removed the Tampered flag.
Now the phone is working great and finger print sensor is working again.
Thanks everyone for the help
elbashadodo said:
Now its working super fine.
I managed to make it S-OFF with firewater (rumrunner didn't work for me) and I locked it and removed the Tampered flag.
Now the phone is working great and finger print sensor is working again.
Thanks everyone for the help
Click to expand...
Click to collapse
Good to know, feel free to hit the thanks button
pradeepvizz said:
Good to know, feel free to hit the thanks button
Click to expand...
Click to collapse
Also since I installed the CM 10.1 and it had a google app package with it, it seems the google app package wasn't installed successfully when the phone was still broken.
Do you know any good ROM I should install that will come with the google app package? or anyway to get the original ROM or RUU I don't know
I mean the original OS
A couple of years ago I came up on a third party boot loader for my Ruby in the development or general forum. I installed this unlocked boot loader and havent been able to remove or revert it to stock. I also cannot flash a rom even though I have clockwork installed. An additional serious issue with this bootloader is that if my battery dies it wont detect it and charge. The device will turn its charging lite on and touching my capacitive buttons will cause my phone to vibrate... but no charging. I confirmed the battery is good by purchasing an external battery charger and successfully charging it. The phone will reboot with charged battery. The phone will charge while it is on but if the battery dies it will no longer charge. I just want to remove this boot loader and revert to the stock booloader so i can re-ROM and charge normally.
Any ideas? I tried the 5.2 toolkit but the adb tools included wont detect my device when rebooted into boot loader.
whitephenix said:
third party boot loader
Click to expand...
Click to collapse
Is it bootloader or custom recovery?
Can you use any of the identifying information at boot to google this site or the web to learn more about the "bootloader" and to put some more info here?
It was a bootloader. I flashed it using adb. Unfortunately it looks like the op I got the bootloader from is gone...
I have also never seen another post for a bootloader for this device... My info reads
*** Unlocked ***
RUBY PVT SHIP S-OFF RL
HBOOT-1.93.0002
eMMC-boot
Mar 15 2012,21:46:51
... I think the menu options might be slightly different all though I have no reference so I'll tell you the two I don't recall originally being in my boot loader excluding my recovery of course.
CLEAR STORAGE
IMAGE CRC
As a further update I have managed to update my recovery to twrp 2.8.1.1 and I have flashed cm11 also I did relock and flash stock ROM. I attempted stock radio but no luck as the bootloader would detect and load but not give me the option to install it instead goes to its stock menus. I have also had device not detected using adb. Killing the server has no affect and I have the correct drivers installed. Specifically I can not initiate the Mainver Error Fix from Hasoon2000's HTC All-In-One Toolkit...
whitephenix said:
As a further update I have managed to update my recovery to twrp 2.8.1.1
Click to expand...
Click to collapse
Might check this, courtesy google:
http://www.igottadroid.com/ModMarket/Listings/electronicrice1612475.html
And some more returns:
https://www.google.com/search?q=hboot-1.93.0002&gws_rd=ssl
Thank you this looks like it will help solve this problem. I will let you know what happens. Thanks.
Ruby is working well, wish their was a firmware to get LTE working on it... Similar or same ship as other LTE phones... Would be nice...
firmware?
whitephenix said:
Ruby is working well, wish their was a firmware to get LTE working on it... Similar or same ship as other LTE phones... Would be nice...
Click to expand...
Click to collapse
The firmware is non-existent--that means it should work just fine on the non-existent hardware.