Related
I have to my hands for a few days only a X10 mini prototype with fw 2.1 (not final fw - debug)
Tell me any dev if they want any file to upload and maybe help him for any way.
Check my photos to proved it what i say!
http://img405.imageshack.us/i/1286524385375.jpg/
http://img140.imageshack.us/i/1286524445708.jpg/
http://img412.imageshack.us/i/1286524481171.jpg/
http://img253.imageshack.us/i/1286524511580.jpg/
Many thanks to Bin4ry and wolfilein who helped me to dump the below files!!!
Dump System With ADB:
http://rapidshare.com/files/424248203/System__updated_with_ADB_.rar
Dump Bootloader:
http://rapidshare.com/files/424303620/spl.bin
Note:
1. Root permision only from ADB shell # [not from device (terminal emulator)]
2. Universal Androot 1.6.1 doesn't works!
Can you try to locate the lockscreen.apk(?), idk if there is such a file but if yes can you post it please, thanks for the screenshots btw
Lef.teris said:
I have to my hands for weekend only a X10 mini prototype with fw 2.1 (not final fw - debug)
Tell me any dev if they want any file ( as /system ) to upload (rapidshare) and maybe help him for any way.
Check my photos to prove what i say!
http: //img405.imageshack.us/i/1286524385375.jpg/
http: //img140.imageshack.us/i/1286524445708.jpg/
http: //img412.imageshack.us/i/1286524481171.jpg/
http: //img253.imageshack.us/i/1286524511580.jpg/
Click to expand...
Click to collapse
Looks the same except for the lockscreen , Good job OP , bad job SE... so no surprises huh??
Could you post a video of this?????
I really think the new Interface looks much better.
tejagamer said:
Could you post a video of this?????
I really think the new Interface looks much better.
Click to expand...
Click to collapse
Its the same ' BLUE BLUE BLUE ' :x , frankly i expected a little more
ya
its the same blue
But i feel its abit darker
Dunno why
Lets wait for official though
Can you dump the loader please so that i can compare to stock one?
Procedure is decribed in X10 forums - custom rom development.
Regards
Bin4ry
Sent from my X10i using Tapatalk
Oooo go Bin4ry thanks!
Sent from my X10i using Tapatalk
You can't just tease us like that. Anything new to report?
System dump please
install the android SDK (developers.android.com)
start CMD (type cmd in search box after opening windows "start")
change path to android sdk\"tools" folder by typing in "cd c:\PATH_TO_YOUR_SDK\tools" (note: PATH_TO_YOUR_SDK is the location of your "android-sdk-windows" folder)
on your phone: Setting -> Applications -> Developer -> Debug Mode
connect your phone with your pc
back to cmd console: type "adb pull /system"
the full system dump shall be in YOUR_SDK_FOLDER\tools\system
Cheers
further reply, sorry!
Bin4ry said:
Can you dump the loader please so that i can compare to stock one?
Procedure is decribed in X10 forums - custom rom development.
Regards
Bin4ry
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
Bin4ry for some reason i don't know why i can't use ADB connection with specific phone (probably reason it's a prototype phone) maybe it want different driver. for my other x10 mini RTL i haven't any issue with ADB.
it need a driver called SEMC HSUSB Device (from device manager - Windows)
http: //img219.imageshack.us/img219/557/10102010131939.jpg
I find another way to pull files from this prototype x10 mini with ftp app
If you know how can i solve with issue please tell me!
In the Menu where USB-Debug is located, there should be an option with PC-Companion. If you check this the phone will ask if you want to install PC-Companion if a usb-cable is connected.
If you choose Install on phone, then in Windows a new Drive will popup, the driver should be located there.
Regards
Bin4ry
Bin4ry said:
In the Menu where USB-Debug is located, there should be an option with PC-Companion. If you check this the phone will ask if you want to install PC-Companion if a usb-cable is connected.
If you choose Install on phone, then in Windows a new Drive will popup, the driver should be located there.
Regards
Bin4ry
Click to expand...
Click to collapse
Pc-Companion installed on my pc but nothing found, it not recognised as connected phone!
Pop up menu is disabled when connecting the phone with pc (not the same with ratail x10 mini)
I try to install other drivers (for X10 mini, X10) but nothing, also nothing found with windows update on Win7
maybe you can copy the things that are need to sdcard an use an terminal emulator for this ??
wolfilein said:
maybe you can copy the things that are need to sdcard an use an terminal emulator for this ??
Click to expand...
Click to collapse
Please tell how can i do this!
@Bin4ry, isn't root required to install io_ex2.ko? Is it not required to dump the boot loader?
Is it worth trying Exploid to gain root? Although I believe we think it won't work. It's got to be worth a try
yes first you need to root the x10 minni
but i think that i is already rooted
then extract this zip to sdcard
forum.xda-developers.com/attachment.php?attachmentid=407185&d=1285348031
open an terminal emulator app and give in
Code:
su
cd /sdcard
insmod io_ex2.ko
cat /proc/splimage > /sdcard/spldump.bin
then you upload the file spldump.bin
(it is on sdcard)
Nice one wolfilein.
@Lef.teris, when you manage to get the drivers sorted of the adb, please try the following: http://android.doshaska.net/x10miniroot
Edit: although I doubt this will work - try using the drivers from here!
wolfilein said:
yes first you need to root the x10 minni
but i think that i is already rooted
then extract this zip to sdcard
forum.xda-developers.com/attachment.php?attachmentid=407185&d=1285348031
open an terminal emulator app and give in
Code:
su
cd /sdcard
insmod io_ex2.ko
cat /proc/splimage > /sdcard/spldump.bin
then you upload the file spldump.bin
(it is on sdcard)
Click to expand...
Click to collapse
I try to gain root with universal androot 1.6.1 but doesn't works. I can't try with exploit, i have issue with ADB driver
Any other way to gain root? so i can take and upload the file you want!
Another thought - could you right click on one of the devices in screenshot you uploaded (this one) and select properties, then click the details tab. Next in the drop down box select Hardware Ids.
Could you post the text thats in there? Hopefully we'll be able to find a driver
This guide was taken and revamped with files included from here http://forum.xda-developers.com/showthread.php?t=1067662
I do not take any credit for anything besides revamping the codes to fit new filenames and making the guide a bit easier.
I finally managed to get java to work with firefox. I test out runescape and it works great on minimum graphics setting may be able set higher.
This is a guide to run Java on webtop on any firmware version and more than likely (but untested) any hdmi hacks/mods.
Prerequisites: Rooted phone and minor knowledge of how to run terminals
webtop2sd (http://forum.xda-developers.com/showthread.php?t=1119555) installed would be a major help simply because lxterminal is so much easier to use!
If you refuse to use webtop2sd, terminal emulator on the market will work just fine.
Download this http://www.megaupload.com/?d=PF56FTWD
Extract the ejre1.6.0_27 folder and move to phone
Copy the ejre1.6.0_27 folder to
/usr/lib/
Ingore this code if you are running from lxterminal
Code:
su
/usr/bin/sudo -u adas bash
Click to expand...
Click to collapse
In lxterminal or whatever terminal
Code:
sudo ln -s /usr/lib/ejre1.6.0_27/lib/arm/libnpjp2.so /usr/lib/firefox-addons/plugins/libnpjp2.so
sudo chmod 755 /usr/lib/ejre1.6.0_27/bin/java
sudo chmod 755 /usr/lib/ejre1.6.0_27/bin/java_vm
sudo chmod 755 /usr/lib/ejre1.6.0_27/bin/javaws
sudo chmod 755 /usr/lib/ejre1.6.0_27/bin/keytool
Click to expand...
Click to collapse
If you get "link failed File exists" run this. then run the ln command
Code:
sudo rm /usr/lib/firefox-addons/plugins/libnpjp2.so
Click to expand...
Click to collapse
You can also use root explorer to set permission for the files
Set to this:
read write execute
X --- X----- X
X ---------- X
X ---------- X
I will try to make updates to this whenever possible.
If anyone could tell me an easy way to take a screenshot from the weptop I would gladly take some and upload.
Someone test Runescape >.>
Mossys said:
Someone test Runescape >.>
Click to expand...
Click to collapse
I have it running flawlessly. Autosetup actually asks for high but I use safemode.
I have no idea how to post screenshots of webtop but I know its possible.
Also I'd like to add that if you do his method and download the current version... Java runs very very slow. This version is much better.
Minecraft?!?!?! I don't have a TVs with HDMI right now or I'd try this myself!
Sent from my MB860 using xda premium
jerrygooch said:
Minecraft?!?!?! I don't have a TVs with HDMI right now or I'd try this myself!
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
hell yeah!! im with you on this lol. i dont have a hd tv xd
Quite possible, I'm not a Minecrafter so I wouldnt know. But feel free to try, I dont see why it wouldn't work.
I'll try to get my hands on some screenshots later after doing some digging on how-to's and update this a little bit.
You could try imagemagick. Not sure if it's in the repos though. I'm about to head off to work or I'd try it.
If it's installable just type in a terminal window.
Code:
import -window root whatever.png
xfce4-screen-shooter
Stephen Who said:
If anyone could tell me an easy way to take a screenshot from the weptop I would gladly take some and upload.
Click to expand...
Click to collapse
if you use xfce you can use xfce4-screen-shooter
dubyajaysmith said:
if you use xfce you can use xfce4-screen-shooter
Click to expand...
Click to collapse
Could you post a link to the exact download for this? I could include it in my post.
I dont own a laptop dock anymore by I thought there was a screenshot function built into webtop. (Printscreen key or ctrl+alt+c).
Also I dont think minecraft will work cause it has native libraries for x86.
Very correct, ctrl+alt+c works.
There is no printscreen key though.
Yeah, no luck with Minecraft. It starts to load then just displays a white screen.
REAVER117 said:
Yeah, no luck with Minecraft. It starts to load then just displays a white screen.
Click to expand...
Click to collapse
I'll see what I can come up with right now.
Edit: I get a blackscreen when trying to run the Minecraft Classic, so it seems thats a no go on Minecraft on this release.
Mossys said:
Someone test Runescape >.>
Click to expand...
Click to collapse
Uploaded screens of Runescape and Minecraft(not working)
Yep, imagemagick works, once you install it.
Works
Thxs
No problem man.
can anyone give me a setup towards this?
I've currently have xterm working, I've installed synaptic. Iceweasel...
There is a major step im missing. I cant launch firefox off the tab, but I can launch Iceweasel via xterm.
Mossys said:
can anyone give me a setup towards this?
I've currently have xterm working, I've installed synaptic. Iceweasel...
There is a major step im missing. I cant launch firefox off the tab, but I can launch Iceweasel via xterm.
Click to expand...
Click to collapse
I dont quite know much about the modded versions of Firefox, but I would assume it acts and functions the same as Firefox itself? Ie, there is an addon folder?
That or get your firefox back working by backtracking your Iceweasel.
Hi together,
I'm trying to root my Huawei Vision U8850. There seems to be only very little information about this phone available, and I've had no luck so far trying various methods.
I've tried SuperOneClick 2.3.3, UnlockRoot, DooMLoRD v4 and some other batch scripts, with no avail. The problem seems to be that the phone is running with Android 2.3.7, and most of the tools are using the Zerg Rush exploit, which seems to have been fixed in 2.3.7.
Zerg Rush always returns a "[-] Hellions with BLUE flames" message, which I suppose means that it failed.
Does anybody know a way of how to get root for this phone?
I've found a Chinese(?) forum where they asked the same question it seems, but I couldn't register there without some sort of code. Maybe somebody knows actually Mandarin/whatever.
translate.google.com/translate?hl=de&sl=auto&tl=en&u=http%3A%2F%2Fbbs.huaweifan.com%2Fshouji-15208--2.html resp. bbs.huaweifan.com/shouji-15208--2.html (links not clickable I'm afraid).
Some more information:
Model
HUAWEI-U8850
Android Version
2.3.7
Kernel-Version
Apps_2.6.32.9-perf
Build-Nummer
U8850 V100R001C169B244SP22
// Edit
Rooted firmware (Huawei.Vision.U8850.Rooted.Firmware.V100R001C279B244SP22.Android.2.37.rar):
ww*.mediafire.com/?aaqs7vt7aavv3
I've found a Russian forum with quite much activity regarding the U8850 Vision. Problem is, I don't speak Russian, and registering on that forum requires you to input a Cyrillic CAPTCHA, which of course didn't work with Window's Character Map.
I've tried to translate the instructions on how to get root from this post: 4pda.ru/forum/index.php?showtopic=257207&st=1700#entry14246750
I am however not sure if I understood everything correctly, or if Google Translate was working correctly.
I'm also not sure what exactly the "Russian Channel" firmware will do to my phone (e.g. phone is only in Russion, keyboard is in cyrillic, GPS not working, etc).
The firmware can be found on the official Huawei page (alongside a "Japan softbank" version): huaweidevice.com/worldwide/technicaIndex.do?method=gotoProductSupport&productId=3812&tb=0
Below is my take on the instruction (which I haven't tried yet). Does this sound plausible to you?
Instructions updated, see below.
Click to expand...
Click to collapse
*** NOTE ***
The forum software won't allow me to post links, and obviously it corrupts text links. So if there appears a space within a link, you have to remove it for the link to work.
Ok, I've successfully performed the root now by creating a custom firmware which includes su, busybox and Superuser.
I've uploaded the firmware here:
mediafire.com/?aaqs7vt7aavv3
To flash the firmware, you will need the "U8850 Upgrade Tool V1.8.4" from here:
ww*.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDQwNjQ=
This will erase all of your user data, so save anything before you do this. And of course I'm not responsible if anything bad happens to your phone, all I can say is that it worked for me.
The firmware is based on a Slovenian one found here:
johnnyparanoia.blogspot.co.uk/search/label/Huawei%20U8850
I've labelled this method the "Russian Root", because I found the initial instructions on a Russian forum. I've translated the instructions and added anything missing to it.
See below for a detailed instruction on how to create a custom rooted firmware for yourself.
/**
* Russian Root
* Gaining root permissions on the Huawei Vision U8850 with Android version 2.3.7
* Originally posted at 4pda.ru/forum/index.php?showtopic=257207&st=1700#entry14246750
* Translated into English, re-arranged items and added some stuff
* I've also replaced the Russian based firmware with a Slovenian, because it was newer
* Discussion Thread: ww*.handy-faq.de/forum/huawei_u8850_vision_forum/227127-huawei_u8850_vision_root_rooten.html
* Credits go to Sanaes & freedroid
*/
You'll need both Windows and Linux to perform this update (e.g. a second computer, multiboot or a virtual machine).
In Windows:
1) Download the "U8850 Upgrade Tool V1.8.4" from here:
ww*.huaweidevice.com/worldwide/technicaIndex.do?method=gotoProductSupport&productId=3812&tb=0
2) Download the "U8850 (Android 2.3.7)V100R001C279B244SP22(Slovenia TUS Mobil)" firmware from johnnyparanoia.blogspot.co.uk/search/label/Huawei%20U8850 or madmodder.co.uk/huawei/u8850/huawei-u8850-firmware-list.htm and extract the contained firmware (we need the SFC-244M-0-8025-A03.nb0 file)
3) Download nb0-utils.jar from yadisk.cc/d/MbFUvzN6bic
4) Download busybox from yadisk.cc/d/JIWwvYPNblL
5) Download su from yadisk.cc/d/XtZXIL9rble
6) Download Superuser.apk from yadisk.cc/d/7TQNlhsFbm1
The following steps need to be performed under Linux:
7) Create and navigate to the folder where you want copy the downloaded files to (e.g. "sudo mkdir /home/username/u8850/")
8) Create a folder where you want the firmware to extract to: (e.g. "sudo mkdir /home/username/u8850/extracted/")
9) Copy the downloaded files to the folder you just created in step 7), using a usb flash drive or whatever means you have (e.g. "sudo cp /path/where/they/are/saved/*.* /home/username/u8850/")
10) Go to that folder: "cd /home/username/u8850/"
11) Unpack the downloaded firmware into the "extracted" folder, using the following command: "sudo java -Xmx512m -jar nb0-utils.jar unpack SFC-244M-0-8025-A03.nb0 /home/username/u8850/extracted"
- Note #1: if this doesn't work, try to install Java first: "sudo apt-get install openjdk-6-jre"
- Note #2: extracting the firmware requires quite a lot of RAM, hence we added the "-Xmx512m" flag which allows Java to use up to 512 MB of RAM. Make sure your Linux machine has this much RAM available!
12) The extracted file "SF8-0-244M-0002-system.img.ext3" contains the Android file system, so we need to mount this file.
- To mount it, we first need to create a folder in /media/: "sudo mkdir /media/android"
- And then we mount the file to that location: "sudo mount /home/username/u8850/extracted/SF8-0-244M-0002-system.img.ext3 /media/android/"
13) Copy the previously downloaded "busybox" file to /media/android/xbin/: "sudo cp /home/username/u8850/busybox /media/android/xbin/"
14) Change the file permissions to 755: "sudo chmod 755 /media/android/xbin/busybox"
15) Copy the previously downloaded "su" file to /media/android/bin/: "sudo cp /home/username/u8850/su /media/android/bin/"
16) Change the owner and group of that file to root: "sudo chown root /media/android/bin/su" and "sudo chgrp root /media/android/bin/su"
17) And the rights to 6755: "sudo chmod 6755 /media/android/bin/su"
18) Copy the previously downloaded "Superuser.apk" file to /media/android/app/: "sudo cp /home/username/u8850/su /media/android/app/"
19) And change the permissions to 644: "sudo chmod 644 /media/android/app/Superuser.apk"
20) Now unmount the image file again: "sudo umount /media/android"
21) And pack the firmware again into a .nb0 file: "sudo java -Xmx512m -jar nb0-utils.jar pack /home/username/u8850/firmware_rooted.nb0 /home/username/u8850/extracted/"
Now we're finished in Linux, the actual flashing has to be done in Windows.
22) Somehow transfer the newly created firmware_rooted.nb0 file to Windows (e.g. with a USB stick).
23) Unpack and install the "U8850 Upgrade Tool V1.8.4". This will install a "SUT L3" program ("Software Update Tool") and the USB drivers for the U8850 Vision.
24) Connect your phone with a USB cable and use the Software Updater to flash the firmware_rooted.nb0 to the phone.
Don't get (too) nervous during the flashing and booting procedure, it does take quite a while.
After completion, all of your data will be reset and the phone should now be rooted. To check, use e.g. "Root Checker" from the market or any app that needs root rights.
Alternative (original) nb0-utils.jar download location:
dl.dropbox.com/u/1134234/AndroidTeam/utils/nb0-utils.jar
Click to expand...
Click to collapse
Hi,
I would like to ask if there are any problems after rooting (with gps etc.) ?
I also use stock Slovenian firmware and have bought a phone at Mobitel:
Android Version
2.3.7
Kernel-Version
Apps_2.6.32.9-perf
Build-Number
U8850 V100R001C279B244SP26
kingeedorah said:
Hi,
I would like to ask if there are any problems after rooting (with gps etc.) ?
I also use stock Slovenian firmware and have bought a phone at Mobitel:
Android Version
2.3.7
Kernel-Version
Apps_2.6.32.9-perf
Build-Number
U8850 V100R001C279B244SP26
Click to expand...
Click to collapse
I haven't noticed any particular problems which I could connect to the rooting process. Yesterday it did take the phone quite a while before getting a GPS fix, but it has done that before (seems to be a general problem for me, even with AGPS settings), but GPS itself was working fine after that.
I'm also having some issues where the internal partition (resp. the /system/ folder) reports an error that there's no space left on the device, e.g. when trying out AdAway instead of AdFree Android. And the latter was working fine.
Besides that, it's working fine. I can call / be called, camera is working, music is working, radio is working (if you can call that working).
I haven't figured out yet how to install the Clockworkmod Recovery yet though. It's still requiring a valid certificate for the update.zip on the Recovery screen, that hasn't changed.
Hi guys,
U8850 Update Tool crashes when trying to flash a phone with the rooted imaged, works just fine with other images. Anyone else facing this problem ?
spoonium said:
*** NOTE ***
The forum software won't allow me to post links, and obviously it corrupts text links. So if there appears a space within a link, you have to remove it for the link to work.
Ok, I've successfully performed the root now by creating a custom firmware which includes su, busybox and Superuser.
I've uploaded the firmware here:
dl.dropbox.com/u/5387565/Android/Huawei.Vision.U8850.Rooted.Firmware.V100R001C279B244SP22.Android.2.37.rar
To flash the firmware, you will need the "U8850 Upgrade Tool V1.8.4" from here:
ww*.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDQwNjQ=
This will erase all of your user data, so save anything before you do this. And of course I'm not responsible if anything bad happens to your phone, all I can say is that it worked for me.
The firmware is based on a Slovenian one found here:
johnnyparanoia.blogspot.co.uk/search/label/Huawei%20U8850
I've labelled this method the "Russian Root", because I found the initial instructions on a Russian forum. I've translated the instructions and added anything missing to it.
See below for a detailed instruction on how to create a custom rooted firmware for yourself.
Click to expand...
Click to collapse
---------- Post added at 02:38 PM ---------- Previous post was at 02:09 PM ----------
napalmique said:
Hi guys,
U8850 Update Tool crashes when trying to flash a phone with the rooted imaged, works just fine with other images. Anyone else facing this problem ?
Click to expand...
Click to collapse
Nevermind, it was the filename that confused the Update Tool, changed the filename to a shorter one and it worked, it flashed it, now booting.
need help
I would like to download from
dl.dropbox.com/u/5387565/Android/Huawei.Vision.U8850.Rooted.Firmware.V100R001C279B2 44SP22.Android.2.37.rar
but error come out.
Can you please re upload that file again?
Thank you.
adp71500 said:
I would like to download from
dl.dropbox.com/u/5387565/Android/Huawei.Vision.U8850.Rooted.Firmware.V100R001C279B2 44SP22.Android.2.37.rar
but error come out.
Can you please re upload that file again?
Thank you.
Click to expand...
Click to collapse
Yes, I'm afraid Dropbox doesn't really like public links, they've disabled that feature temporarily for my account. Although I severly doubt I've really reached the limit of 20 GB/day for this single file...
I've uploaded the file to Mediafire now, although I had to split the archive to make that work. I hope it'll live longer there.
mediafire.com/?aaqs7vt7aavv3
Help
spoonium said:
Yes, I'm afraid Dropbox doesn't really like public links, they've disabled that feature temporarily for my account. Although I severly doubt I've really reached the limit of 20 GB/day for this single file...
I've uploaded the file to Mediafire now, although I had to split the archive to make that work. I hope it'll live longer there.
mediafire.com/?aaqs7vt7aavv3
Click to expand...
Click to collapse
Could you please, reupload the rooted firmware is empty the folder in mediafire
spoonium said:
*** NOTE ***
3) Download nb0-utils.jar from yadisk.cc/d/MbFUvzN6bic
4) Download busybox from yadisk.cc/d/JIWwvYPNblL
5) Download su from yadisk.cc/d/XtZXIL9rble
6) Download Superuser.apk from yadisk.cc/d/7TQNlhsFbm1
Click to expand...
Click to collapse
Can you please be kind and upload those 4 files somewhere for i can take them? I searched on google but i don't know how good those files are and i don't want to make something stupid with my phone.
Thanks in advance and keep up the good work!:laugh:
CWM
hi guys
I also installed the pre rooted firmware and cant figure out how to get CWM on there which is how i assume the jelly bean goes on?...
can anyone help... I have just had thing a day and want jelly bean on there soonest!,,
cheers guys...
spoonium said:
Hi together,
I'm trying to root my Huawei Vision U8850. There seems to be only very little information about this phone available, and I've had no luck so far trying various methods.
I've tried SuperOneClick 2.3.3, UnlockRoot, DooMLoRD v4 and some other batch scripts, with no avail. The problem seems to be that the phone is running with Android 2.3.7, and most of the tools are using the Zerg Rush exploit, which seems to have been fixed in 2.3.7.
Zerg Rush always returns a "[-] Hellions with BLUE flames" message, which I suppose means that it failed.
Does anybody know a way of how to get root for this phone?
I've found a Chinese(?) forum where they asked the same question it seems, but I couldn't register there without some sort of code. Maybe somebody knows actually Mandarin/whatever.
translate.google.com/translate?hl=de&sl=auto&tl=en&u=http%3A%2F%2Fbbs.huaweifan.com%2Fshouji-15208--2.html resp. bbs.huaweifan.com/shouji-15208--2.html (links not clickable I'm afraid).
Some more information:
Model
HUAWEI-U8850
Android Version
2.3.7
Kernel-Version
Apps_2.6.32.9-perf
Build-Nummer
U8850 V100R001C169B244SP22
// Edit
Rooted firmware (Huawei.Vision.U8850.Rooted.Firmware.V100R001C279B244SP22.Android.2.37.rar):
ww*.mediafire.com/?aaqs7vt7aavv3
Click to expand...
Click to collapse
My SUT L3 is error
napalmique said:
Hi guys,
U8850 Update Tool crashes when trying to flash a phone with the rooted imaged, works just fine with other images. Anyone else facing this problem ?
---------- Post added at 02:38 PM ---------- Previous post was at 02:09 PM ----------
Nevermind, it was the filename that confused the Update Tool, changed the filename to a shorter one and it worked, it flashed it, now booting.
Click to expand...
Click to collapse
Can you remember what the error message was when the filename was too long? Did it look like this:
Error Code: 0xc60e
Error: Download fail,
Error = SE_ERR_SUT_DETECT_DEVICE_FAIL (0xC60E).
How to install CWM on it?
shub said:
hi guys
I also installed the pre rooted firmware and cant figure out how to get CWM on there which is how i assume the jelly bean goes on?...
can anyone help... I have just had thing a day and want jelly bean on there soonest!,,
cheers guys...
Click to expand...
Click to collapse
Ditto. Should I just flash it with U8850 Upgrade Tool? How can I get CWM on the pre-rooted Jelly Bean ROM?
Hi! I flash the rooted firmware and now it's rooted! Thanks!
In another forum i found the jellybeamV3.zip but i can't enter in recovery to flash that ... any help?
How can i flash now with a zip file? Thanks!
Teovenezia said:
Hi! I flash the rooted firmware and now it's rooted! Thanks!
In another forum i found the jellybeamV3.zip but i can't enter in recovery to flash that ... any help?
How can i flash now with a zip file? Thanks!
Click to expand...
Click to collapse
since you have rooted, you can use it. why would you need jellybeamv3?
Ok folks. I've put together a Python/wxPython utility that will automate changing the update-binary in KitKat ROMs to a update-binary that is suitable for older recoveries. This will allow the older recoveries to install KitKat ROMs without having to juggle multiple recoveries.
This particular tool was written specifically for the LG Optimus One device family ( P500 and variants ). This utility will NOT manipulate anything other than an Android 4.4+ ROM for a p500 or thunderg board.
Users of other devices that may be interested in this utility for their device, please feel free to contact me via PM. As of now tho my intended audience is the LG Optimus One family.
[ Download ]
Windows users need Python 2.7.6 and wxPython 2.8 installed on their PCs before trying to use this tool. I am working on a Windows only version as well.Linux/Ubuntu :: CWM_UpdateBinary_1.0.0.zip​
Reserved
Can I use in TWRP 2.6.3.0 to flash 4.4 ??
Cool, many thanks!
I am so happy to get rid of hardware button-based cwm for better recovery
z1022 said:
Can I use in TWRP 2.6.3.0 to flash 4.4 ??
Click to expand...
Click to collapse
Should be able to.
Sent from my LG-P769 using Tapatalk
EDIT: Nevermind, I answered my own question.
Thanks for this tool. You are always helping us.
Sent from my LG-P500 using Tapatalk 2
ibub said:
EDIT: Nevermind, I answered my own question.
Thanks for this tool. You are always helping us.
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
More than happy to. I'll never be a professional programmer but I don't want to let what I've learned go to waste.
Sent from my LG-P769 using Tapatalk
shinobisoft said:
Windows users need Python 2.7.6 and wxPython 2.8 installed on their PCs before trying to use this tool.
Click to expand...
Click to collapse
Tried on Windows XP x86, when pressing Update program silently crashes, binary doesn't replaced.
Python 2.7.6 and wxPython 3.0 installed, trying this 4.4 build.
z1022 said:
Can I use in TWRP 2.6.3.0 to flash 4.4 ??
Click to expand...
Click to collapse
When I replacing binary from tool manually TWRP 2.6.3.0 and CWM 5.0.2.0 still failed to install rom (Status 6).
What needs more to do?
--------------------------------
shinobisoft said:
I am working on a Windows only version as well.
Click to expand...
Click to collapse
Utility can be greatly simplified if use command line version of 7Zip. It can replace files in archive.
If it's really necessary (?) checking build.prop can be implemented though internal find command.
Simple BAT/CMD file and not needing additionally install large Python environment if Windows-version still will be based on it.
So here's attached simple standalone working script of that I talking for.
Extract, place ZIP into "1 Place ZIP here" folder, launch "1 Start.bat", grab file from "2 Done" folder.
Script checking line ro.build.version.release in build.prop. Written 4.4, but 4.4.* passed too.
All this can be easily wrapped in GUI (AutoIt etc).
Bonoboo said:
Tried on Windows XP x86, when pressing Update program silently crashes, binary doesn't replaced.
Python 2.7.6 and wxPython 3.0 installed, trying this 4.4 build.
When I replacing binary from tool manually TWRP 2.6.3.0 and CWM 5.0.2.0 still failed to install rom (Status 6).
What needs more to do?
--------------------------------
Utility can be greatly simplified if use command line version of 7Zip. It can replace files in archive.
If it's really necessary (?) checking build.prop can be implemented though internal find command.
Simple BAT/CMD file and not needing additionally install large Python environment if Windows-version still will be based on it.
So here's attached simple standalone working script of that I talking for.
Extract, place ZIP into "1 Place ZIP here" folder, launch "1 Start.bat", grab file from "2 Done" folder.
Script checking line ro.build.version.release in build.prop. Written 4.4, but 4.4.* passed too.
All this can be easily wrapped in GUI (AutoIt etc).
Click to expand...
Click to collapse
I cannot say why the program fails on Windows XP x86 when pressing the Update button. I no longer own an XP machine to test on. I just updated my wxPython to the version you installed and it runs just fine. I'm at a loss. Sorry.
I appreciate your input, however I am a C/C++ programmer not batch script. The Windows stand-alone version has nothing to do with Python or wxPython. It is written in C at the API level so it's pretty small. I only mentioned installing Python and wxPython for those who may have been too impatient to wait for the Windows only version. Linux/Ubuntu OS's come with Python preinstalled.
Also, please bear in mind, I'm doing this on my dime and my time :silly: The Python version only took a few hours to write. The stand alone Windows version will take 4 times that long. GUI is done for the Windows version, I'm still having issues with my zip libraries.
I may also be missing something. I remember reading somewhere that the updater-script needs to be modified as well for this hack to work but I can't find any reference as to what exactly needs modified.
Windows XP x86, wxPython 3.0 will crash. use wxPython 2.8 is OK.
However, use TWRP 2.6.3.0 and CWM 5.0.2.0 still failed to install this rom (error Status 6).
Let me do a little more digging
Sent from my LG-P769 using Tapatalk
Had what I needed all along... Oops. Running a couple tests yet. Will let yall know when I upload the update
Not sure what exactly is going on here. I have two P500 KitKat ROMs, 12/27 and 12/31. Manually editing or using my tool to edit both end up with the same situation after installing the ROM. It won't boot. Not even LG logo. My P509 eventually reboots back to recovery. So... I'm at a loss. Could be my recovery too, although I'm pretty sure someone else has reported success manually editing the ROM and installing with CWM 5.0.2.7 Touch by @vivekkalady.
Any ideas?
EDIT:
I still can't get either ROM to boot. No problem installing either ROM edited either way, they just won't boot. Editing manually or with this tool. WT?... I've tried with 4 different recoveries too...
I have opened another thread about Ubuntu 14.04 not being able to show the internal storage of the Z2 before. I have it solved with this web pages help; http://ubuntuforums.org/showthread.php?t=2226702. (For Ubuntu 14.04 users, steps 3-4-5 are enough)
Then I have installed Flastool from it's official site and it just worked without needing further interfere from the command line.
How ever when I try to flash a FTF file I get the error shown on the picture. Some problem with header, a .sin file.
I have tried with different FTF files, all from XDA stock firmware topic. So I do not think they all are broken.
Why could it be and does anyone have a solution?
Thanks
Sent from my Nexus 7 using XDA Free mobile app
_delice_doluca_ said:
I have opened another thread about Ubuntu 14.04 not being able to show the internal storage of the Z2 before. I have it solved with this web pages help; http://ubuntuforums.org/showthread.php?t=2226702. (For Ubuntu 14.04 users, steps 3-4-5 are enough)
Then I have installed Flastool from it's official site and it just worked without needing further interfere from the command line.
How ever when I try to flash a FTF file I get the error shown on the picture. Some problem with header, a .sin file.
I have tried with different FTF files, all from XDA stock firmware topic. So I do not think they all are broken.
Why could it be and does anyone have a solution?
Thanks
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Have you installed all of the drivers? That usually fixes that problem.
gamer649 said:
Have you installed all of the drivers? That usually fixes that problem.
Click to expand...
Click to collapse
I believe there are no drivers for the Linux based OSes. If you mean ADB and Fastboot, yes they are installed.
Flashtool already can see and identify my device, it can even tell the version of Android inside.
Sent from my Nexus 7 using XDA Free mobile app
I think I must add another picture because this one is barely read able.
Sent from my Nexus 7 using XDA Free mobile app
You need to open flashtool as sudo or superuser
Also that screenshot is indicating a corrupted FTF
Envious_Data said:
You need to open flashtool as sudo or superuser
Also that screenshot is indicating a corrupted FTF
Click to expand...
Click to collapse
Yes!!
Sudo was the answer Thank you very much. This was literally the last thing preventing me from falling in love with Ubuntu, you saved that relationship
_delice_doluca_ said:
Yes!!
Sudo was the answer Thank you very much. This was literally the last thing preventing me from falling in love with Ubuntu, you saved that relationship
Click to expand...
Click to collapse
ubuntu is terrible and nice
anyways anything android needs to have admin rights or above so ADB, fastboot etc need to be ran in sudo or SuperUser