hey guys how are you all people
i am here posting the old device folder i have used for my cm11 development.
this is for those who want to build cm for this device.
ROM most probably goes in boot loop after installing...
as i have lost my device so this may be my last contribution to this forum.
device folder
https://github.com/k2wl/android_device_samsung_delos3geur
instructions to build
1. initialize the android build environment . use following thread for this
http://forum.xda-developers.com/nexus-4/general/guide-cm11-how-to-build-cyanogenmod-11-t2515305
follow the instructions before repo sync
2. create local_manifests folder in .repo of your source directory
and put following file
https://github.com/TheWhisp/android_local_manifest/blob/cm-11.0/local_manifest.xml
3. now
Code:
repo sync
4. after source is downloaded
make following folder in ur source directory
Code:
device/samsung/delos3geur
device/samsung/delos3geur-kernel
extract my above device repository in delos3geur folder
extract the kernel source you have in delos3geur-kernel
5. open terminal in device/samsung/delos3geur/patches
give following command
Code:
./install.sh
6. open terminal in root of your source directory i.e. cm11 source
issue following command
. build/envsetup.sh && brunch delos3geur
Click to expand...
Click to collapse
you can post the errors while compiling here in this thread
i will try to help(but i may not be available all the time and i don’t own the device now)
Thanks for sharing brother..
Sent from my GT-I8552 using Tapatalk
coolkoushik07 said:
Thanks for sharing brother..
Sent from my GT-I8552 using Tapatalk
Click to expand...
Click to collapse
the folder i shared is from my other pc...and as my laptop/quattro both got stolen on new yr eve ...the above folder mostly will take you to bootloop......
Thanks
Thanks and don't worry i will release a stable (Not so stable) version of CM11 by the end of of this month (My 12th BOARD!! Wish me good luck :laugh so just wait....
Till now my CM11 can boot and systemui does not forcce closes and except that it has lots of bugs . I wanted to upload it but my connection is toooooo slow (Shows 7hr remaining to upload file ) so..........
lols21.10 said:
Thanks and don't worry i will release a stable (Not so stable) version of CM11 by the end of of this month (My 12th BOARD!! Wish me good luck :laugh so just wait....
Till now my CM11 can boot and systemui does not forcce closes and except that it has lots of bugs . I wanted to upload it but my connection is toooooo slow (Shows 7hr remaining to upload file ) so..........
Click to expand...
Click to collapse
so you already compile it from above folder or some other folder????
best luck for exams...")
lols21.10 said:
Thanks and don't worry i will release a stable (Not so stable) version of CM11 by the end of of this month (My 12th BOARD!! Wish me good luck :laugh so just wait....
Till now my CM11 can boot and systemui does not forcce closes and except that it has lots of bugs . I wanted to upload it but my connection is toooooo slow (Shows 7hr remaining to upload file ) so..........
Click to expand...
Click to collapse
Upload it man keep it over night btw does wifi and phone work and internal and external storage work??
Sorry,man but i can't upload it till jee mains examns because:
1)My pc is from stone age :laugh: and if i keep it on for only 3-4 hr it start to act as a loudspeaker with woofer
2) My net is toooooo slow so, and is limited
Its not like i am poor just that my parent says that get admission in any collage and will give you whatever you want.(Man!!! its not like i am bad or average in study )
So, lets come back to topic
1)bluetooth is making me crazy so i will never look at it again (Its not working)
2)it can read internal but not external
3)USB connection is discontinuous same goes the wifi
and all other cm11 bugs
i wanted to upload screenshots but screen capture is not working
I promise just that when my exams are over i will upload it. I know you might be saying i am a******** but understand i have my own reasons.All i can do now is make differnet roms and test them and upload them in bulk
What nonsense man you are awsome who told you poor and all man good luck for your exam even my 10th board exams are in march good luck bro
will love to try out your rom after boards
even my parents are saying the same thing so I can understand:victory::good:
Well best of luck :good: @ZANKRUT.DOSHI for your 10th exams.I know i used to think that 10th exams were some big deal but it was not:laugh:
So, back to topic can someone plz tell me what are the exact requirment for porting rom. I tried like thousands of thread but was not able to get solution.
Someone give me the EXACT That is if processor needs to be the same or the screen resolution cause for Processor :
http://www.gsmarena.com/htc_desire_600_dual_sim-5465.php
OR
http://www.gsmarena.com/htc_desire_500-5623.php
and for Resolution their are many phones.cause i was unable to find phone with same processor and also with same resolution
So, someone plz tell me what are those EXACT requirment(only the EXACT)
cause as for now it will take my most of time to debud CM11 and i don't have that much time .I know that mine CM11 is not fully stable but i wanted to try out few things .
lols21.10 said:
Well best of luck :good: @ZANKRUT.DOSHI for your 10th exams.I know i used to think that 10th exams were some big deal but it was not:laugh:
So, back to topic can someone plz tell me what are the exact requirment for porting rom. I tried like thousands of thread but was not able to get solution.
Someone give me the EXACT That is if processor needs to be the same or the screen resolution cause for Processor :
http://www.gsmarena.com/htc_desire_600_dual_sim-5465.php
OR
http://www.gsmarena.com/htc_desire_500-5623.php
and for Resolution their are many phones.cause i was unable to find phone with same processor and also with same resolution
So, someone plz tell me what are those EXACT requirment(only the EXACT)
cause as for now it will take my most of time to debud CM11 and i don't have that much time .I know that mine CM11 is not fully stable but i wanted to try out few things .
Click to expand...
Click to collapse
porting needs patience...lots of patience
exact requirements
1.same processor (amrv7-neon..etc)
2.same resolution
3.same brand
Well for patience, my pc takes 5 min to start than whenever i right click i have to wait for some time.So patience is not a prblem
well its look like your are looking at our thread for some time so i can ask my noob douts to you
i could not find any phone that matches our phone spec in samsung devices. can you tell me which phone is best for our quattro(if you can spend some time searching )
you can try porting some of SG I9082 if we dont have that stable CM yet til our OP is free and figured out most of those life SUCKING bugs...
almost same with our specs...SG I9082 or also known as Samsung Galaxy Duos
lols21.10 said:
Well for patience, my pc takes 5 min to start than whenever i right click i have to wait for some time.So patience is not a prblem
well its look like your are looking at our thread for some time so i can ask my noob douts to you
i could not find any phone that matches our phone spec in samsung devices. can you tell me which phone is best for our quattro(if you can spend some time searching )
Click to expand...
Click to collapse
ya if you can get exact specifications then it is very good but same resolution and same chipset with same brand will be fine too...
try grand i9082, s2 qcom version, note have same brand with same resolution
Search for any porting guide on xda...you will find plenty...
after that try to collect as many as roms of same brand and resolution for your experiment.
well first of all i am sorry @k2wl,but i downloaded your Rom and edited without asking you :
http://forum.xda-developers.com/showthread.php?t=2627818
Well my final practicals are over and I got 30/30 in all in PCM and C.S YEAH!!!!!!!:laugh::laugh::laugh::laugh::laugh:
than i went to my brother's house.he has the best pc(Well for me it is best) and i just took any rom from grand duos which was actually your and ported to grand quattro.well i did't try it.My phone is now on trip to goa with my sis :crying:
I have ported it using dsixda kitchen.I did't actually try but uploaded it in a server.The link is not public.
I will upload it after k2wl will give me prermission . Try it and tell me bugs
So, @k2wl can i use rom and upload your link in your terms and condition
Update: 3:2 AM
One thing i forgot is the kernel.Which one should i use your cm11?will it work for that rom?
lols21.10 said:
well first of all i am sorry @k2wl,but i downloaded your Rom and edited without asking you :
http://forum.xda-developers.com/showthread.php?t=2627818
Well my final practicals are over and I got 30/30 in all in PCM and C.S YEAH!!!!!!!:laugh::laugh::laugh::laugh::laugh:
than i went to my brother's house.he has the best pc(Well for me it is best) and i just took any rom from grand duos which was actually your and ported to grand quattro.well i did't try it.My phone is now on trip to goa with my sis :crying:
I have ported it using dsixda kitchen.I did't actually try but uploaded it in a server.The link is not public.
I will upload it after k2wl will give me prermission . Try it and tell me bugs
So, @k2wl can i use rom and upload your link in your terms and condition
Update: 3:2 AM
One thing i forgot is the kernel.Which one should i use your cm11?will it work for that rom?
Click to expand...
Click to collapse
just give me credits if you post that ported rom...
about kernel :- just use the kernel in cm11 of quattro if you want to port kitkat rom of grand
k2wl said:
just give me credits if you post that ported rom...
about kernel :- just use the kernel in cm11 of quattro if you want to port kitkat rom of grand
Click to expand...
Click to collapse
But kernel has the bugs right so if he uses the same kernel sources then wifi phone internal storage bugs will still be there right
ZANKRUT.DOSHI said:
But kernel has the bugs right so if he uses the same kernel sources then wifi phone internal storage bugs will still be there right
Click to expand...
Click to collapse
i think those are rom errors and not kernel errors...but we can make new kernel when ever we want
k2wl said:
i think those are rom errors and not kernel errors...but we can make new kernel when ever we want
Click to expand...
Click to collapse
So can we fix the wifi and phone errors in cm11 if yes sir then how
CONFUSED
Yeah, that's what caused me searching all night (From 9:30pm to 5:45 am) about how to make custom kernal from source.i searched a lot of threads but it was all tooo much for noob like me that i fainted for 5 hours :
Is some is free to make a custom boot.img for cm11 cause it requries
1)Good pc( I don't have that)
2)GOod internet connection that neither
And yeah one last thing what are thread moderators for, to maintain that thread or to help devs of that thread
So we are not getting cyanogenmod any time soon
Related
Out of curiosity i have been compiling CM10.2 for the last 2 days, and it now compiles successfully 100% (after many repo sync), but the thing is, when it's installed it doesn't even go past the S4 Bootlogo.. that's just sad, it's like the init file (ramdisk) is wrong so I tried the one from the aosp 4.3 ge builds, but that also didn't work, but it's probably not that. I don't know what it is, but of course without any logcat it's hard to find.
even my AOSP 4.3 compiled build went further than that.. it just showed me a black screen cause of the wrong egl libs but it showed a logcat at least. with the major errors of libc being faulty etc. (but it went further than CM.. in the early stage when there were almost no cm patches for cm10.2 yet)
Oh and yes I did include the proprietary files, and found that some of them don't even exist on the original 4.3 rom, so that's kinda lame..
here are the missing ones:
lib/libqmi.so
lib/libqmiservices.so
lib/libqmi_cci.so
lib/libqmi_common_so.so
lib/libqmi_csi.so
lib/libqmi_encdec.so
lib/libqcci_legacy.so
lib/libqmi_client_qmux.so
lib/libreference-ril.so
lib/libril-qcril-hook-oem.so
lib/libsecril-client.so
lib/libtime_genoff.so
lib/libWVStreamControlAPI_L1.so
lib/libidl.so
lib/libivxdrm.so (was spelled wrong by cm, it includes capitals)
that's a lot of libs, does someone know if one of them could be responsible for not going past the boot logo?
I can upload my build if anyone wants it but it does nothing so it's kinda useless
Any useful is appreciated very much! :silly:
just wait awhile..
xZain69 said:
just wait awhile..
Click to expand...
Click to collapse
Yes I will of course, and I have no problem with that. I'm just curious what the reason is for it not to boot at all. I want to learn as much as possible about the android system so that includes this
kernel problem ?
show this
http://forum.xda-developers.com/showthread.php?t=2348733
Syncing CM10.2 Sources now
Most of the low end devices have got 4.3 booting like HTC Pico and Optimus L5 etc.
PS: In HTC Pico CM10.2 Rom only BT and Camera is broken so I am sure we can get a fully stable one in a few tries. Obviously, we have to fix bugs
This thread over here at m919 has got cm10.2 working, well sort of. Check this out. http://forum.xda-developers.com/showthread.php?t=2348733
~~~~~~~~~~~~~~~~~~~~~
I am always on the mobile app and am always 'trying' to help others and moderators on the forum and learning something new everyday. I make stupid posts sometimes, but I never repeat a mistake more than once. I may not be a developer, but I know alot of stuff, so feel free to messsge me any questions and I'll be happy to answer them to the best of my ability.
~~~~~~~~~~~~~~~~~~~~~
I'm starting a video game company with my friend where we will be making Android games. message me for more info or go here: http://forum.xda-developers.com/showthread.php?t=2290843
got it working
Up to date as of November 22, 2013.
Modified: Installation guide: V2.0, some other parts including general info, changelog etc.
Added: Swapping guide, quick V2.1 guide, quick updating guide
---------------------------------
Are you experienced with ULTRA B.U.X? Please help me write its own guide (PM me)
---------------------------------
I created a centralized document with information about everything regarding Badadroid. The same questions are often asked over and over again by newbies/noobs (call it however you want to). I decided to write a centralized document that will include general information, a more detailed installation guide for those who struggle or have issues and a FAQ for everything regarding Badadroid.
In order to allow users to add their own feedback and comments I created it in Google Docs - but if a moderator/developer/authorized user here wants me to put everything on this thread just say...
I really hope this will help everyone. More info in the doc itself.
See http://bit.ly/19jWmE1
-------------------------------------------
Did this guide help you? Please hit the "Thanks" button
________________________
Member of Bada Israel
Are you Israeli? Wait for the Hebrew translation
Thx for the work!
Btw, wave doesn't have 512mb ram, (384mb)
Retrete said:
Thx for the work!
Btw, wave doesn't have 512mb ram, (384mb)
Click to expand...
Click to collapse
That's right. I think I confused it with my GPU thanks for the heads up.
Can anyone type the code to activate Zram on NAND tigrouzen rom (V3)? Please
Kiboi said:
Can anyone type the code to activate Zram on NAND tigrouzen rom (V3)? Please
Click to expand...
Click to collapse
Its all ready activated
Nadavs10 said:
I created a centralized document with information about everything regarding Badadroid. The same questions are often asked over and over again by newbies/noobs (call it however you want to). I decided to write a centralized document that will include general information, a more detailed installation guide for those who struggle or have issues and a FAQ for everything regarding Badadroid.
In order to allow users to add their own feedback and comments I created it in Google Docs - but if a moderator/developer/authorized user here wants me to put everything on this thread just say...
I really hope this will help everyone. More info in the doc itself.
See http://bit.ly/19jWmE1
Click to expand...
Click to collapse
Thanks Nadavs10, I think a FAQ is a good idea ... the point is how to ensure every newbie reads it before posting ...
I think it would be nice to join or at least to link this with another FAQ it was started in badadroid project page http://code.google.com/p/badadroid/wiki/FrequentlyAskedQuestions
Some comments:
Does it work for Wave II? YES! Many people ask over and over again the same question. Voice calling works now for Wave II too. If there’s something that isn’t the same for both devices, I will write it.
Click to expand...
Click to collapse
Bluetooth works in S8500 but no in S8530 (see status and this post)
Is it legal? Everything is legal except gapps. Decide for yourself.
Click to expand...
Click to collapse
Both badadroid and gapps are "legal", the difference is licensing model, so developers share badadroid open source code and binaries based in other open source code (android, aries ....) but they do not share gapps as it is google propietary. It is not ilegal to install gapps, but it should be ilegal to include it in badadroid package without google permision, so you have to install it separately.
There are many ROMs like Nand/LS Smook/moviNand. What are these, and what’s the difference? I’ll tell you the truth, I don’t really understand it. If someone knows it would be great for some comment here."
Click to expand...
Click to collapse
I am not an expert, but I am trying to share as I understand:
There are different "custom rom android flavors" (Cyanogenmod, AOKP, MIUI,...) as some communities/developers make some modifications in android source code. Just one example googling http://www.phonearena.com/news/Meet-the-best-custom-ROMs-for-Android_id44353
There are different badadroid roms as some developers try to optimize some points:
--Volk204's CM10.1 rom (and previously Rebellos' CM10) uses the same fota for booting, and it uses "standard" internal storage in our waves, so the uninstallation procedure is simple (another zip through CWM).
--Tigrouzen FnF SD (sorry if the name or some detail is wrong) uses special fota for booting, and it uses Nand memory/external SD storage with SD card partioned. http://code.google.com/p/badadroid/wiki/HardwareDocumentation#Memory Nand is a special memory in our waves that has to be written in a special way, and it is faster, so the unistallation procedure is a full flash of bada firmware. Tigrouzen's rom is more performance oriented and better for game players as far as I know.
hunktb said:
I am not an expert, but I am trying to share as I understand:
There are different "custom rom android flavors" (Cyanogenmod, AOKP, MIUI,...) as some communities/developers make some modifications in android source code. Just one example googling http://www.phonearena.com/news/Meet-the-best-custom-ROMs-for-Android_id44353
There are different badadroid roms as some developers try to optimize some points:
--Volk204's CM10.1 rom (and previously Rebellos' CM10) uses the same fota for booting, and it uses "standard" internal storage in our waves, so the uninstallation procedure is simple (another zip through CWM).
--Tigrouzen FnF SD (sorry if the name or some detail is wrong) uses special fota for booting, and it uses Nand memory/external SD storage with SD card partioned. http://code.google.com/p/badadroid/wiki/HardwareDocumentation#Memory Nand is a special memory in our waves that has to be written in a special way, and it is faster, so the unistallation procedure is a full flash of bada firmware. Tigrouzen's rom is more performance oriented and better for game players as far as I know.
Click to expand...
Click to collapse
Tigrouzen's rom is based on AOSP (Android Open Source Project) wich is basically, a build of the vanilla android sources released by google and the others implicated in the Android primary developement. (even if, tigrouzen included in his rom some code from CM to allow a better customization of the ROM, and so, it's a little bit different from pure AOSP)
Cyanogenmod is a modified open source android rom... it have some major changes in the code itself (compared to AOSP), in the library it uses, etc... it allow a higher personalisation of the UI than the original AOSP rom. (see their official website to find more info about the cyanogenmod project...)
And I would finally said that yes, tigrouzen's rom is released with an high optimisation care (resulting in a really smooth rom) while volk's rom: works on both wave I and II, I would say that it is a little bit more stable (but that's mainly because it's less often udated, several tigrouzen's updates resulted in an broken functionality (see the bluetooth problems in the AOSP thread) wich he quickly fixed anyway.) and I would say (except for the last "mic in call" update) more "hardware development" oriented (that's just my feeling, but it seems to me that volk (and rebellos) are focusing on the perspective of bringing a fully working android sytem to the wave rather than on the optimization of their existing incomplete system. (and honnestly, it's not a bad thing, it keep general development ongoing)).
Weird
Tigrouzen said:
Its all ready activated
Click to expand...
Click to collapse
Hey Tigrouzen i am facing a problem while using yur AOSP 4.3 Rom... I am using the ROM 4.3 LS V2 Revision 3 with SmooK V3 SD Kernel downloaded from http://www.multiupload.nl/HQ3BM7DOTH. The issue is weird as on the first booting of andriod, the netwrok is detected after arnd 20-25 mins but the next tiem the phone is booted in android it never detects network? :/
Any help on this plz wud be rly appreciated... Thanks
ghanii said:
Hey Tigrouzen i am facing a problem while using yur AOSP 4.3 Rom... I am using the ROM 4.3 LS V2 Revision 3 with SmooK V3 SD Kernel downloaded from http://www.multiupload.nl/HQ3BM7DOTH. The issue is weird as on the first booting of andriod, the netwrok is detected after arnd 20-25 mins but the next tiem the phone is booted in android it never detects network? :/
Any help on this plz wud be rly appreciated... Thanks
Click to expand...
Click to collapse
I solved this problem by removing then reinstall the sim, try
Kiboi said:
I solved this problem by removing then reinstall the sim, try
Click to expand...
Click to collapse
Thanks i am trying it right now....the ROM and Kernel which I mentioned are the right versions?
Kiboi said:
I solved this problem by removing then reinstall the sim, try
Click to expand...
Click to collapse
No luck... i cant understand dis issue.. how come sim is detected once and not the other time :/ any network settings which i should specify? or any odr Kernel which might be a solution for this?
ghanii said:
No luck... i cant understand dis issue.. how come sim is detected once and not the other time :/ any network settings which i should specify? or any odr Kernel which might be a solution for this?
Click to expand...
Click to collapse
Try with another sim and tell me if it works
ghanii said:
No luck... i cant understand dis issue.. how come sim is detected once and not the other time :/ any network settings which i should specify? or any odr Kernel which might be a solution for this?
Click to expand...
Click to collapse
move it to the top right corner. It sometimes helps.
Otherwise use an other sim card.
GreekBlood said:
move it to the top right corner. It sometimes helps.
Otherwise use an other sim card.
Click to expand...
Click to collapse
I should move the sim to the top right corner? :/
ghanii said:
I should move the sim to the top right corner? :/
Click to expand...
Click to collapse
Its possible if its old sim, then try get new revision of your sim.
ghanii said:
I should move the sim to the top right corner? :/
Click to expand...
Click to collapse
Go to setting and below bluetooth there is an option of more click on it and then tick use only 2g network
this may help
Maybe "we" collect different external Links in different languages...
Today I saw again German user asked...
Or maybe "we" could use 1 Guide and translate in different languages...
For instance:
English
German
Hindi----> user kktkaran has enough time and energy to do this, instead spxm
.
.
.
Btw.
For few things Screenshots or Video maybe helpfull.
And please, maybe here on XDA 1 copy for reading... So if external Link changed/removed/... it is possible to read here something in Thread.
Thanx in advance.
Best Regards
Tigrouzen said:
Its possible if its old sim, then try get new revision of your sim.
Click to expand...
Click to collapse
i tried a different kernel and it worked fine ver 3.0.85... voice is also clearer. thanks for your help
i am from those people who have problem in wave2 battery like
after restart battery drains to zero or similar level
random shut down problem
so
i have done an experiment which help me thats why i'm sharing it
first of all these problems are because of battery as i think so
1.first remove the battery
2.spin on flat surface if it spin then you can do nothing but replace your battery
3.if doesn't spin check its point of connection and remove any dust or rust
3.last but not least if any thing doesnt work
then
take a "soledring ion" and solder each connecting point of your battery seperately dont let them touch each other so that solder cover connecting points.
now put your battery in phone and test it work or not i.e. your problem solved or not
sorry for bad english
and do it on your own risk and carefully
Asop or badadroid
I'm currently using the ASOP NAND ROM created by Tiguorzen, however it has some call problems similar to old badroid ROM so I'm wondering whether I should shift to badroid project as it seems to get regular updates and ASOP ROM seems like abandoned by tigo(hope not) but ASOP is undobtly the fastes and most streamlined ROM not sure abouy the latest badadroid though.
"The G2 Dream Team" (and they well deserve that name) has released not one, but TWO lollipop builds for the LG G2. Both ROMs are based on the same build tree, but one ROM is CM12 and the other is a LiquidSmooth 4.0 ROM. Despite being built from the same build tree, they carry different features. They are stable and usable for daily drivers, but they may carry some bugs, like a non-functional video playback, NFC issues for LS/VS980 but it should all be sorted out in the near future. Head over to the threads to read more!:
Liquidsmooth 4.0:
http://forum.xda-developers.com/lg-g2/development/rom-liquidsmooth-v4-0-lg-g2-t2948395
CM12:
http://forum.xda-developers.com/lg-g2/development/rom-cyanogenmod-12-0-lg-g2-t2944269
Older posts:
An increasing amount of devices have been receiving unofficial Android Lollipop 5.0 ports, like the HTC One M8 and the LG Optimus L9. Today another device can be added to the list of phones receiving a treatment with the taste of Android Lollipop, the LG G2. While there generally has been a wide contribution from the community; testing, sharing files and giving ideas, two XDA members stood out in particular in order to create the build, @ylukasy and @InfinitusDesigner. The port is still in a very early pre-alpha stage, and the bugs are barely known yet, but the ROM boots and has even been rooted! While it might be wisest to wait until an official thread has been made before grabbing your devices and start flashing, @ylukasy has already provided a download link for the ROM, and calls for people to help discover the bugs so that they can be eliminated. Please notice that the ROM might not be stable enough to be used as a daily driver, but owners of a LG G2 are officially an important step closer to having a stable Lollipop ROM!
If this post caught your interest and you're willing to take the risk, head over to the last pages in the following thread: http://forum.xda-developers.com/lg-g2/general/unofficial-cm12-nexus-5-posted-t2936398
As previously mentioned, a lot of things are not sorted out yet, and the build might not be for your device number, so make sure you read the entire thread before continuing, or simply wait untill an official thread is made.
Update:
An official thread has been posted and it can be found by following this link: http://forum.xda-developers.com/lg-g2/development/rom-android-lollipop-fast-clean-t2941922
The build is a port of the Nexus 5 ROM, and users of the ROM have been saying that the rom is very fast and fluid, calls work, camera works (although the quality is inferior), but other users have been reporting random reboots and incompatibilities with certain apps such as YouTube or WhatsApp.
by vPro97
This post will be updated regularly when new information regarding Lollipop ports surface.
Fantastic News! Will get round to trying it shortly, thanks for the link!
While I have my doubts about it being functional (or even booting) on my LS980, I'll give it a shot and see what happens.
Nice to see things moving at breakneck speeds these days.
On a side note, I just read the AnandTech review of the Nexus 6 and am happy to report that my well over a year old G2 beats it in several benchmarks so I'm pretty satisfied at the moment, especially considering I got it for free. I mean really...
In before "no build for xxxx?!?!?!?"
Anyone know how to port a d802 rom to d800?
Ready to try it out and see what happened..??
his build is from the same source the other was he doesn't deserve credit for it. it's using cm12 kernel and dev claims it's using nexus 5 port yet requires gapps and no signs of any nexus 5 code at all.
Wouldn't it be alot easier to just post the download link here?
₪LG G2₪
Zyner said:
Wouldn't it be alot easier to just post the download link here?
₪LG G2₪
Click to expand...
Click to collapse
It's not my work, and there are some steps which must be followed in order to make it work. I am just objectively informing any news regarding Android Lollipop for the LG G2.
OP has been updated.
The download link was removed before i could get the v3 version so im stuck with v2 and ive been using it as my daily (yeah it reboots every 5 minuets and i can leave wifi on or it will bootloop) But honestly thats the fun in testing this stuff out
MrNegative370 said:
The download link was removed before i could get the v3 version so im stuck with v2 and ive been using it as my daily (yeah it reboots every 5 minuets and i can leave wifi on or it will bootloop) But honestly thats the fun in testing this stuff out
Click to expand...
Click to collapse
Me too.
Is there anyone that can share privately the V3 version with me ? :fingers-crossed:
here is something better:
http://forum.xda-developers.com/lg-g2/development/rom-cyanogenmod-12-0-lg-g2-t2944269
Jam4l said:
here is something better:
http://forum.xda-developers.com/lg-g2/development/rom-cyanogenmod-12-0-lg-g2-t2944269
Click to expand...
Click to collapse
TY !
Can anyone port the Nexus 5 ROM?
Updating this thread later today if nothing gets in the way.
Hi everybody!!
I need a tester please:
I built pure AOSP for the D802 from sources of Android right now, has anybody time to test it?
It is an experimental build and I didn't test it right now, so I don't know if it is working, please make a backup from your current rom.
The build comes with an built in CWM recovery and should be with root access. It can be flashed with the same instructions like the CM 12 build.
Edit: Bootloop right now ... Anybody, can you take a logcat?
http://builds.hubdroid.com/otherroms/aosp_d802-ota-102.zip
Thank you in advance!! Please anybody who tries it: can you send me a pm?
Flo0008 said:
Hi everybody!!
I need a tester please:
I built pure AOSP for the D802 from sources of Android right now, has anybody time to test it?
It is an experimental build and I didn't test it right now, so I don't know if it is working, please make a backup from your current rom.
The build comes with an built in CWM recovery and should be with root access. It can be flashed with the same instructions like the CM 12 build.
http://builds.hubdroid.com/otherroms/aosp_d802-ota-102.zip
Thank you in advance!! Please anybody who tries it: can you send me a pm?
Click to expand...
Click to collapse
I'd love to test this for you, but I'm on Sprint LS980 Would you mind making a build for us?
iamterence said:
I'd love to test this for you, but I'm on Sprint LS980 Would you mind making a build for us?
Click to expand...
Click to collapse
Yes sure, but right now, I have to solve the bug, that the d802 wouldnt boot, so this may take some more time until I build it for other devices too.
Regards
NEED HELP
Hello guys, I'm working on a generic tree for our beloved device Honor 7, but not getting enough success, so each and every of you are invited to help me create a new device tree for AOSP 5.1 ROM or CM 12.1, so that we can taste the Stock Android too.
The benefits of these ROMs are that the device will get more fast and stable as there will be minimum apps and bloatwares installed.
So, it is a humble request, that whosoever have any knowledge about creating a tree from scratch please help me.
I have created a skeleton of the tree but it is not a success too as there are many things we still have to consider.
@sminki and @kenshiwara, we will setup an organization on GitHub so everyone can contribute there only.
Hi,
It will be wonderfull to have CM on our honor7.
Sorry mate. You haven't seen my troubles over the last few weeks then
After my H7 'died', I got a warranty replacement phone, and unlocking was proving impossible, each day was bringing more frustration and anger so i've sold it!
That's it, i'm out of the "honor" business for good (hence the "unsupported" bit on the recovery and kernel threads), but as a parting "gift", here's a few things that may help "the cause".
Sorry, the length of this post got out of control! :silly:
device tree starting point:
https://github.com/TeamWin/android_device_huawei_p8 - it's similar enough, that with a little editing and boom, we had our recovery*
https://github.com/debbiche/android_device_huawei_p8 - another fuller "tree" (wip), again the p8 is similar enough to use as a base
https://github.com/Gibbon99/android_device_huawei_hwgemini - mediapad x2 - another kirin
if you're insane, you could get the dtb files (iirc - i got these from compiling the source) and decompile, but this contains EVERYTHING, theses files are huge, many hundred kb and would take days to get the info out you need (if there is any!)
cm
have a look at codeworkx H6 git, it's the closest device you'll find that has CM actually running on it, albeit CM11 (and abandoned!)
https://github.com/codeworkx/proprietary_vendor_huawei
https://github.com/codeworkx/android_device_huawei_h60-common
other things:
osm0sis' kitchen out of the many boot image unpack/repack tools, this worked the best with huawei boot/recovery images
* with this in mind, anyone running Linux can pull apart my recovery, fix the issues in default.prop, add extra partitions to fstab and repack it. then post it for everyone else to use.
with the sh!tty way fastboot is on these phones, and the way modem binaries get patched, you're going to have to look for a way to write these in recovery (scripted with dd i imagine) so that everyone can use without having the ballache that is B100,B121,B140 etc etc to get to a version that will work with your ROM. this for me is where it's all going to hurt! (and end with bricks!)
final thing - the kernel source is terrible, it is so far removed from AOSP that simple things that you could normally just drop in, like cpu governors won't work. unless you really know C++ and how to debug it's gonna be near stock (like mine funnily enough!)
Good luck chaps :good: it's gonna be a hell of a ride!
sminki said:
Sorry mate. You haven't seen my troubles over the last few weeks then
After my H7 'died', I got a warranty replacement phone, and unlocking was proving impossible, each day was bringing more frustration and anger so i've sold it!
That's it, i'm out of the "honor" business for good (hence the "unsupported" bit on the recovery and kernel threads), but as a parting "gift", here's a few things that may help "the cause".
Sorry, the length of this post got out of control! :silly:
device tree starting point:
https://github.com/TeamWin/android_device_huawei_p8 - it's similar enough, that with a little editing and boom, we had our recovery*
https://github.com/debbiche/android_device_huawei_p8 - another fuller "tree" (wip), again the p8 is similar enough to use as a base
https://github.com/Gibbon99/android_device_huawei_hwgemini - mediapad x2 - another kirin
if you're insane, you could get the dtb files (iirc - i got these from compiling the source) and decompile, but this contains EVERYTHING, theses files are huge, many hundred kb and would take days to get the info out you need (if there is any!)
cm
have a look at codeworkx H6 git, it's the closest device you'll find that has CM actually running on it, albeit CM11 (and abandoned!)
https://github.com/codeworkx/proprietary_vendor_huawei
https://github.com/codeworkx/android_device_huawei_h60-common
other things:
osm0sis' kitchen out of the many boot image unpack/repack tools, this worked the best with huawei boot/recovery images
* with this in mind, anyone running Linux can pull apart my recovery, fix the issues in default.prop, add extra partitions to fstab and repack it. then post it for everyone else to use.
with the sh!tty way fastboot is on these phones, and the way modem binaries get patched, you're going to have to look for a way to write these in recovery (scripted with dd i imagine) so that everyone can use without having the ballache that is B100,B121,B140 etc etc to get to a version that will work with your ROM. this for me is where it's all going to hurt! (and end with bricks!)
final thing - the kernel source is terrible, it is so far removed from AOSP that simple things that you could normally just drop in, like cpu governors won't work. unless you really know C++ and how to debug it's gonna be near stock (like mine funnily enough!)
Good luck chaps :good: it's gonna be a hell of a ride!
Click to expand...
Click to collapse
Thanks, this will help enough and I was not aware of your troubles
I got a device tree working with CM12.1 and USB debugging, but Mali was a showstopper. Now I'm fighting with CM13 instead... Generally, the B313 ROM is far less hacky, but we lose the open source kernel for a while until they release one.
I will set up a GitHub tree with what I have when I get CM13 compiling again, however keep in mind that you need to patch the boot.img manually to use the closed-source B313 kernel until Huawei releases the source for that, which probably won't happen at the very least until it's fully in OTA. I'd love some help from someone who is more experienced, especially with the Mali drivers which are the worst of pains.
EDIT: I got CM13 compiling again. Let's hope for the best.
EDIT2: Mali works! Sadly, that currently depends on Huawei's libgui.so which brings in a huge chunk of Huawei's patched libraries - otherwise, it segfaults in strange places. Any ideas?
Is there any whatsapp group of honor 7.I want to join it.
udayraj99 said:
Is there any whatsapp group of honor 7.I want to join it.
Click to expand...
Click to collapse
Stop spamming
Omg I think I will never receive a Custom ROM for PLK-UL00 as they didn't release source code for that and device tree is way far
Mee too
omkarpranavxxx said:
Omg I think I will never receive a Custom ROM for PLK-UL00 as they didn't release source code for that and device tree is way far
Click to expand...
Click to collapse
As an indian user evwn i feel i made wrong choice....should have gone for one plus x
asiekierka said:
I got a device tree working with CM12.1 and USB debugging, but Mali was a showstopper. Now I'm fighting with CM13 instead... Generally, the B313 ROM is far less hacky, but we lose the open source kernel for a while until they release one.
I will set up a GitHub tree with what I have when I get CM13 compiling again, however keep in mind that you need to patch the boot.img manually to use the closed-source B313 kernel until Huawei releases the source for that, which probably won't happen at the very least until it's fully in OTA. I'd love some help from someone who is more experienced, especially with the Mali drivers which are the worst of pains.
EDIT: I got CM13 compiling again. Let's hope for the best.
EDIT2: Mali works! Sadly, that currently depends on Huawei's libgui.so which brings in a huge chunk of Huawei's patched libraries - otherwise, it segfaults in strange places. Any ideas?
Click to expand...
Click to collapse
Hello, did any of the CM compiled fully to be a flashable zip? if yes, then have you flashed it and took logcat?
Nishadan said:
As an indian user evwn i feel i made wrong choice....should have gone for one plus x
Click to expand...
Click to collapse
Yup lesson learnt snapdragon or nothing frm now on
maybe you know
I post link - http://download-c.huawei.com/downlo...oadId=62086&version=204465&siteCode=worldwide
Honor 7 Open Source（PLK-L01_Android5_0_2_EMUI3_1_kernel_EN)
Any progress?
I hope I can do something,it is nice to see cm for honor 7.
Since it has been a while that any Info came out of this thread I have to ask.. Is anyone still working the tree?
I normaly do not ask for etas but in this case it would be useful if the thread is abandoned that we could know the reasons and Problems so maybe someone else could join in with a different approach
cycovision said:
Since it has been a while that any Info came out of this thread I have to ask.. Is anyone still working the tree?
I normaly do not ask for etas but in this case it would be useful if the thread is abandoned that we could know the reasons and Problems so maybe someone else could join in with a different approach
Click to expand...
Click to collapse
I'm a bit busy to continue my work on the tree, but after my exams I will continue to work on tree with Android 6.0 source. Hope it goes well.
DigiGoon said:
I'm a bit busy to continue my work on the tree, but after my exams I will continue to work on tree with Android 6.0 source. Hope it goes well.
Click to expand...
Click to collapse
good luck with your exams
Until then you can use this
New ROM for Honor 7 PLK-L01.
DigiGoon said:
Until then you can use this
New ROM for Honor 7 PLK-L01.
Click to expand...
Click to collapse
Can we get a kitkat rom if your work with the device tree is done ? I really do miss kitkat[emoji20]
Sent from my PLK-TL01H using XDA-Developers mobile app
muhammad Shohayeb said:
Can we get a kitkat rom if your work with the device tree is done ? I really do miss kitkat[emoji20]
Sent from my PLK-TL01H using XDA-Developers mobile app
Click to expand...
Click to collapse
I will be developing AOSP 6.0, if others can give it a try then maybe we can get it.
Since everyone kept asking and I myself wanted it, I decided to start this project. The main reason why I didn't do it earlier was because I needed Asus to release the Oreo build already so I could get the required files. So for now I leave you with this, hope I made your day a bit better and have a great day!
Note: the build you see here is just so I could get the compiler working.
Sweet!! Looking forward to seeing the progress on this.
Nice. Do you think the build will have camera quality issues though?
kekley said:
Nice. Do you think the build will have camera quality issues though?
Click to expand...
Click to collapse
We'll see once I get a debuggable build running. I hope it's smooth sailing, but I can't guarantee anything.
First build?
Is this the first build?
If you want tester I am always available.
Naman Vashishth said:
Is this the first build?
If you want tester I am always available.
Click to expand...
Click to collapse
Nice to hear that you want to test the rom, but unfortunately I still don't have a flashable build. I try to work on it whenever I can to get one out as soon as possible. Do keep in mind I do this in my free time when I'm not busy with school. When I do get a debuggable build out, I'll let this forum know so I can get some testers to test it out (other than myself).
+)KEV1N(+ you are a savior , please help us get rid this sick twisted ASUS stock firmware , it's a mess in every aspect , heat, poor battery life, muffled sound via headphones, enormous amount of services running in the background (loses 20% overnight), complete failure in both firmware and kernel wise cause they massively overclocked that S625 , i can live with a rom without the main camera app , OpenCam will do just fine , just take care of that power consumption please cause on paper it should deliver 12-16h SOT , it's 5000mah with s625 and AMOLED screen for god sake !
Thank you in advance for your effort.
Kevin,
Thanks so much for taking on this project!
Not many have the skills or time to do a project like this. I think I can speak for all Z3Z owners when I say that your work will not go unappreciated.
I am simply observing the work of the gentlemen, let us continue in this to create a lineage.
rinampa said:
I am simply observing the work of the gentlemen, let us continue in this to create a lineage.
Click to expand...
Click to collapse
It is a slow process, especially since this is my daily driver. I just came back from holidays back home and now I'll continue to work on it whenever I get the chance. I'll get a working test build running eventually. Can't guarantee when, just know that as a new developer it'll take time to fix things and put them in place since porting is also not easiest of projects.
I visit this thread multiple times a day, it gives me hope)
Thank u Sir
I'm grateful that you are working on this project.
Take your time & carry on.
I want do downgrade form Oreo to MM, Q: will i need to extract recovery.img form MM zip and flash it separately or the stock Oreo recovery will work with all raw asus builds ?
Build# : ww-11.41.87.2 this is the latest MM update before Nougat update, i'm a little confused cause every build has it's own method so any advice for the safest fastest way to :
1-Downgrade to MM from Oreo
2-Flash Magisk to root and install greenify , viper4android cause i'm done with this Oreo.
3-Do i need to unlock the bootloader ?
4-Do i need twrp to flash migisk?
5-Does twrp work with all versions of android ?
3-What are the cons of this procedure if a custom ROM would fall from heaven and i would want to flash it after i flash MM?
sam.fisher190 said:
I want do downgrade form Oreo to MM, Q: will i need to extract recovery.img form MM zip and flash it separately or the stock Oreo recovery will work with all raw asus builds ?
Build# : ww-11.41.87.2 this is the latest MM update before Nougat update, i'm a little confused cause every build has it's own method so any advice for the safest fastest way to :
1-Downgrade to MM from Oreo
2-Flash Magisk to root and install greenify , viper4android cause i'm done with this Oreo.
3-Do i need to unlock the bootloader ?
4-Do i need twrp to flash migisk?
5-Does twrp work with all versions of android ?
3-What are the cons of this procedure if a custom ROM would fall from heaven and i would want to flash it after i flash MM?
Click to expand...
Click to collapse
Guess what !!!
https://forum.xda-developers.com/ze...nbrick-flash-stock-mm-asus-zenfone-3-t3840702
Its more than 100days now since this "little something" post.
Is there any progress dear KEVIN?
or shall I switch to some other device?
Aditya Tiple said:
Its more than 100days now since this "little something" post.
Is there any progress dear KEVIN?
or shall I switch to some other device?
Click to expand...
Click to collapse
I started at the end of my school year a couple of months back. I had a month-long hiatus in July due to me going back to my family back home. I came back in August and am working on it as a side project. Naman's helping me with this right now and so far we got till the boot animation. And then you have those times when we fix something and you go one step back. It's a slow process since the two of us aren't like 24/7 busy on the project. I usually work on it during weekends, but lately I've been needing my phone more and more since I'm very very busy with other priorities. Again, this is a side project I'm doing because I like coding and I like learning new things. So, I can't say for certainty when we can get a release out, but I work eagerly every time hoping it gets past the boot animation or even gets there if I fix something.
I hope this clears out any misconceptions you may have of me and this project. Have a further great day sir
It's nice to hear from you.
That's d very reason I visit this thread.
Keep ur good work going.
Keep us updating.
All d best
Hello mate, you know the whole world is waiting for this build from xda to 4pda to every other android community so what's the news my friend? can you post the bugs maybe we can help with some of them and learn about the Lineage route you chose.
The midterm examination is about to start and you'll be too busy with the study!
My full appreciation to your work.
Instead of quenching our thirst, op made it worse... Shame no developer decided to code for this device.
Mrkblo said:
Instead of quenching our thirst, op made it worse... Shame no developer decided to code for this device.
Click to expand...
Click to collapse
There is a developer who is willing to port lineage if people will crowdfund the purchase of a Z3Z for them.
https://forum.xda-developers.com/zenfone-3-zoom/help/search-developer-custom-rom-t3793680/page2