Hey guys, after much digging I've been unable to find a solution to my problem. It may be my lack of technical knowledge or a unique issue, either way please bare with me.
I have a Galaxy S3 SPH-L710 that I have been attempting to root. In short, I used Odin to flash a CF Auto-Root tool. Unfortunately, it didn't quite do the trick because when I enter SuperSU, I'm given the prompt to update binarys and manually re-root. I know that's common, my issue is that when I attempt to enter recovery mode AFTER this I am presented a screen with a red android logo that says CF Auto-Root at the top. No recovery mode, no way to factory reset, seems as if my device is half rooted. Do I need to flash a stock rom through Odin to resolve this? If so, where can I find a current 4.3 version?
What I'd really like is to successfully root and load a custom ROM on this device which should be easy but has only proven to be a difficult process. As an aside could anyone possibly provide an updated guide to do this? Every one I follow has lead me to issues/incomplete rooting.
Thanks guys, I hope this isn't beating a dead horse too much.
xwm said:
Hey guys, after much digging I've been unable to find a solution to my problem. It may be my lack of technical knowledge or a unique issue, either way please bare with me.
I have a Galaxy S3 SPH-L710 that I have been attempting to root. In short, I used Odin to flash a CF Auto-Root tool. Unfortunately, it didn't quite do the trick because when I enter SuperSU, I'm given the prompt to update binarys and manually re-root. I know that's common, my issue is that when I attempt to enter recovery mode AFTER this I am presented a screen with a red android logo that says CF Auto-Root at the top. No recovery mode, no way to factory reset, seems as if my device is half rooted. Do I need to flash a stock rom through Odin to resolve this? If so, where can I find a current 4.3 version?
What I'd really like is to successfully root and load a custom ROM on this device which should be easy but has only proven to be a difficult process. As an aside could anyone possibly provide an updated guide to do this? Every one I follow has lead me to issues/incomplete rooting.
Thanks guys, I hope this isn't beating a dead horse too much.
Click to expand...
Click to collapse
You can just flash a recovery from odin and then flash a custom rom with su.Seems that the half-root hasnt damaged your recovery partition.
piano13 said:
You can just flash a recovery from odin and then flash a custom rom with su.Seems that the half-root hasnt damaged your recovery partition.
Click to expand...
Click to collapse
I was able to flash Philz Touch Recovery and through that fully root my device. I am now running CyanFox and so far pretty happy with it. Thanks for the advice!
Related
So...
I was asked to root a Samsung Galaxy S II i9100 the other day...
I got the person to back up all of their stuff through Kies and then they bought the phone back to me to try and root.
(Why do they want to root it? To remove the noise on the camera when capturing video - I believe this will help narrow down which version it is..)
I managed to download and install a Siyah version, through Odin, and i have the CWM recovery mode, and also the Download mode available.
When i boot up the phone, it comes up to the Yellow triangle image, and no further...
I thought it was a pretty simple task, clearly i have messed up and not realised the extent of the process - i am clearly missing something out - or downloading the wrong things... Should i be downloading a different version - i can't find what files i should have already - and i don't know how i would be able to download apps to the phone now it's only on recovery mode...
I understand everyone asks these and you direct them to other previous threads, but i've doubted myself on everything i've done up to now, so could anyone clarify the correct steps i should be taking?
I believe the phone was on 2.3.3 before my attempted root, but i don't personally have any other details of the phone....
I don't even mind if i can't root it, but if i could possibly revert it back to stock i would be equally happy as we currently have an unusable phone.. (I don't think it's bricked is it?)
Thanks in advance,
Tom.
MrTommo said:
So...
I was asked to root a Samsung Galaxy S II i9100 the other day...
I got the person to back up all of their stuff through Kies and then they bought the phone back to me to try and root.
(Why do they want to root it? To remove the noise on the camera when capturing video - I believe this will help narrow down which version it is..)
I managed to download and install a Siyah version, through Odin, and i have the CWM recovery mode, and also the Download mode available.
When i boot up the phone, it comes up to the Yellow triangle image, and no further...
I thought it was a pretty simple task, clearly i have messed up and not realised the extent of the process - i am clearly missing something out - or downloading the wrong things... Should i be downloading a different version - i can't find what files i should have already - and i don't know how i would be able to download apps to the phone now it's only on recovery mode...
I understand everyone asks these and you direct them to other previous threads, but i've doubted myself on everything i've done up to now, so could anyone clarify the correct steps i should be taking?
I believe the phone was on 2.3.3 before my attempted root, but i don't personally have any other details of the phone....
I don't even mind if i can't root it, but if i could possibly revert it back to stock i would be equally happy as we currently have an unusable phone.. (I don't think it's bricked is it?)
Thanks in advance,
Tom.
Click to expand...
Click to collapse
If you are still able to access cwm and download mode I am pretty sure that you are not bricked(but still there is always a small probability) so I recommend you flash a stock rom via Odin, read lots because I have read of an old siyah kernel which has the brick bug, be careful with ics stock as well.
For all the above recommended matters there are hundreds of threads with extensive details.
For Rooting read several threads and choose the easiest method.
Sent from my GT-I9100 using xda app-developers app
Somebody correct me if I'm wrong, but as far as I know, the kernel you flashed ( siyah ) is not compatible with gingerbread....
So as another poster commented, flashing a firmware in Odin will be the easiest way to recover. Then you can try rooting again....
But do your research first....
Afaik. ...rooting methods for gingerbread are "not prolific". It might be advisable to flash 4.0.3 ics or 4.1.2 jellybean and then root that........
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
Why did you not advice him to update his phone????? You went through all that trouble of using KIES to backup and you didn't update the phone?
A firmeware update might have already solved his problems.
And how could you not read that the flashed Kernel does not support such an old Android version. Rooting has a possibility to cause your phone harm, so it should come naturally that you inform yourself on the topic and double check everything in order to minimze the risks.
I am really sorry for what I wrote, but I just can't understand such a mentality!
Hi,
I am totally new to flashing phones, so I need your help. My aim is to flash my GT-I9100 (Vodafone UK) with Cynogen Mod Kitkat. Currently my phone has Android version of 4.1.2. I do not have root access to my phone and according to Cynogen Mode wiki, this is not necessary.
Apparently I can't post links before 10 posts, sorry I can't show the links from where I got the instructions.
I have 1st tried to flash a new recovery image so that Cynogen installation would be possible.
1) Heimdall Method as in the Cynogen Mode Wiki Page
2) Odin Method available on the internet.
In both I have been successful transferring the listed recovery images (6.0.4.7 and 6.0.2.9) to the phone but in both cases whenever the phone is restarted, the device is stuck with Samsung GT-I9100 logo and yellow triangle. I can't access to recovery mode at all.
I had to go back to the download mode again (luckily this worked) and flashed with the original firmware in each cases to recover the device.
I am also confused about the version of CWM as when I go to the original website, above versions are not listed under Galaxy S2.(Only 4.0.1.5 and 5.8.1.5)
Am I missing something here?
Many thanks.
hey,here's the instructions you need
http://forum.xda-developers.com/gal...om-official-cyanogenmod-11-nightlies-t2634693
a bit of search wouldn't hurt you know...
good luck:good:
TheImpossibleEnemy said:
hey,here's the instructions you need
http://forum.xda-developers.com/gal...om-official-cyanogenmod-11-nightlies-t2634693
a bit of search wouldn't hurt you know...
good luck:good:
Click to expand...
Click to collapse
Hi
Many thanks for your reply. Believe me I have gone through many posts and search before posting here. I have also checked the link but can't understand why I am encountering yellow triangle after CWM flashing. Am I suppose to flash something else as well together with the version 6.0.4.7?
Don't bother about that yellow triangle,it's normal.When you'll be done flashing your rom,use TriangleAway app to remove it.
TheImpossibleEnemy said:
Don't bother about that yellow triangle,it's normal.When you'll be done flashing your rom,use TriangleAway app to remove it.
Click to expand...
Click to collapse
But after I flash with CWM I can't get access to the recovery to install the rom? The only option I have is the download mode.
I thought after flashing with CWM the stock rom would work normally and flashing with custom rom could be done later if needed.
Just to iterate again, when I flash the recovery, phone does not switch on but stuck with yellow triangle. It does not go in recovery mode. I have to re flash the stock rom to save device.
Could it be you're flashing only a temporary recovery,without an included kernel?Just guessing you may well be.FYI S2 doesn't have a separated partition for recovery as some other phones has.
As you're currently using a stock rom,the easiest way IMO would be flashing Philz kernel first(from Original Android Development section).Then follow the instructions from the CM11 thread.
TheImpossibleEnemy said:
Could it be you're flashing only a temporary recovery,without an included kernel?Just guessing you may well be.FYI S2 doesn't have a separated partition for recovery as some other phones has.
As you're currently using a stock rom,the easiest way IMO would be flashing Philz kernel first(from Original Android Development section).Then follow the instructions from the CM11 thread.
Click to expand...
Click to collapse
It is possible but instructions on cynogenmod wiki page does not advise about a kernel. It gives a link to the recovery file and after recovery is flashed, I should be able to use volume up + home + power to access the recovery. Which I can't.
You just got given the best bit of advice anyone could give you, you have no clue whatsoever, and you're questioning said advice ?
Forget the CM Wiki. As you've just been told, any recovery flashed independently of the kernel on the I9100 will only persist until the next reboot. The easiest way to achieve what you're trying to achieve is to flash a custom kernel which will give you root+permanent CWM, and go from there.
You can either follow the advice you've been given & get this done the easy way, or you can continue to fumble around for days/weeks/months/whatever.
No skin off our noses either way *shrugs*
And no, I'm not going to apologise for being a bit 'rough' with you. People who come here with no idea, ask for help & either don't follow great advice they're given or argue the point about things they have no understanding of **** me to tears & get zero empathy.
Hey guys... So I'm REALLY new at this whole rooting thing, so please forgive me if I am not aware of any terms related to rooting and such.
So basically what happened was this:
I decided to root my Galaxy S4 (sgh-i337 --- AT&T) using the towelroot method. I had to use this method because my phone is currently running Android 4.4.4 KitKat (TouchWiz) and it worked fine. SuperSU was installed, Root Checker said my phone was rooted, it was good. I tried to install CWM using Odin, and I got the "RESET" or "PASS" from Odin, which I thought that it meant that it worked. However, when I tried to go into Recovery Mode, it went into Stock Recovery Mode. I started to look at other tutorials, and I came across another one that involved flashing your phone's respective CWM .img file from your phone itself (transfer the .img to your phone's SD, and then flash it from your phone using the app, Flashify). But when I tried to go into Recovery mode to see if it worked, it gave me the yellow triangle with an error message, "System software is unauthorized by AT&T" or something like that. I tried to look at other posts, and there was a general idea that I needed to flash the stock Kernel. Now, the way I rooted the phone in the first place, I already had two different ones downloaded. One was flashed, towelroot was used, and then the second kernel (which was the one that originally on my phone before rooting) was flashed. After that, it was rooted. So me, being the complete noob I am at rooting, decided to re-flash both, in order, to see if that cleared up the error message when trying to get into Recovery Mode. This did not solve the problem either.
Again, I would like to apologize for my lack of knowledge on rooting and such, so please forgive me for my incompetence. And yes, I know that there are other threads on topics like this, but I have tried several things and it has not worked. Any help on how to fix this problem (and how to install CWM properly on my phone - since it is updated to 4.4.4 TouchWiz - or if I should use TWRP instead, because I intend on downloading the Kangapop GPE ROM(and how to install that for my specific model/software version)) is greatly appreciated, thanks!
I recently rooted my phone and I would like to make a backup before I mess around with a few things. The phone I have is a Galaxy K Zoom. It's running 4.4.2 Kitkat.
My problem is that CWM and TWRP don't seem to work. CWM tells me that my phone is unsupported, and TWRP says it will backup, but when it reboots to create it, I get an error. Is there another recovery app that is available? Or am I stuck having to restore to stock if I soft brick it? I'm ok even using ADB and/or Odin to flash it back to the phone, but I just need to make a recovery to start with.
Also, I have a recovery file that I found in a rooting thread for my phone. Won't that recovery file restore to their phone's settings? How can I make my own? I'm sort of a noob at this, so sorry for asking.
Thanks in advance and I really hope I get get some direction here. I'm more than willing to read through threads, I just don't know if I'm searching for the right terms. I noticed that there have been some posts on this before and there were no replies. Hopefully I can get one!
I have a Sprint LG G3 LS990 that I have been having major trouble with as far as getting a custom recovery. Reason being is the Auto Rec wouldnt work for me because of my version of SuperSU. Flashify wouldnt work, even if I could find the correct file becuae it says to be careful when you are using lollipop AND/OR MAKE SURE BOOTOADER IS UNLCKED BEFORE FLASHING. I thought I had found a solution, but that solution did this to my phone. I basically tried to use BUMP to get TWRP, and based on what I read, I am SOFTBRICKED to a certain extent? My phone still works and everything, still root access, but I do not have any type of recovery or download mode to use any of these solutions that I keep finding. When I try to go into Download mode, or Boot into Recovery, it just goes to FASTBOOT. I cannot find our exactly what to do from here. I am rather a NOOB, but can take and retain direction and information well. I have been looking for a FASTBOOT SOLUTION for literally like TWO DAYS now and cannot seem to find one. If anyone could please help and tell me where to go from here. Anything that would get me to where I can factory reset my phone and reroot it. That is really the goal. The ultimate goal is reroot, custom recovery and BLISSPOP ROM and then I will be fine. I need information on totally RESETTING PHONE/(RESTORING RECOVERY?) from fastboot mode, or justs doing the whole process. Resetting phone so everything is how it should be STOCK WISE, so I can proceed to re root it. Thank you in advance for even reading this.
Have you tried flashing a recovery from within android? Like flash the latest twrp.