HI guys I need help asap my phone has no IMEI and it wont get signal. it was working fine till I rebooted the I notice I had a red x on my signal can any one help please. i'm on stock sony firm .532 android 4.2.2 ultra C6802 root only.
:crying:I must say that when I try to go to call settings it crashes and it says ( unfortunately, settings has stop ) and when I go to wireless settings & networks then more when I click mobile network it crashes too. Help
jaime4272 said:
:crying:I must say that when I try to go to call settings it crashes and it says ( unfortunately, settings has stop ) and when I go to wireless settings & networks then more when I click mobile network it crashes too. Help
Click to expand...
Click to collapse
If you downgraded to .532 then
Flash this .532 ftf to avoid IMEI loss
http://forum.xda-developers.com/devdb/project/?id=2476#downloads
I'm guessing that you've downgraded from 290 to 532? If so, update to 290 again. This problem won't go away by itself. It'a a baseband thing. It got updated with the ROM when you updated to 290, so it seems like it's not compatible with earlier builds, and that's why we're ending up with no IMEIs when we downgrade.
It'll work again once you update to 290 again.
no I never upgraded to anything because I didn't want to unlock my phone so I'm on .532
jaime4272 said:
I'm on .532
Click to expand...
Click to collapse
I know, but have you been on 290, and then downgraded to 532? Have you been on any ROM that's using 290 as a base?
---------- Post added at 03:40 AM ---------- Previous post was at 03:38 AM ----------
jaime4272 said:
no I never upgraded to anything because I didn't want to unlock my phone so I'm on .532
Click to expand...
Click to collapse
Huh... that's strange.. Have you checked out the "missing IMEI" thread that's some place around here?
well I could unlock my phone because us unlockable. but only if I has to
This 532 ROM should fix your problem. Flash it using Flashtool. No root or unlocked bootloader is needed.
i did but, i only found ones that tells you only if you updated
jaime4272 said:
i did but, i only found ones that tells you only if you updated
Click to expand...
Click to collapse
Check my post above yours (with the link). Just flash it using Flashtool and you'll be fine.
It's almost 4 AM here now, so i'm going to bed. I have Tapatalk notifications enabled though, so i'll catch your new posts in bed if there are any
i will try it. i hope this can fix my problem thanks a bunch. let you know ( lord )
You do that. I'm going to bed now, so be sure to quote my posts from now on, so i get notifications from Tapatalk. Can't guarantee that i'm awake 5 minutes from now, but we'll see. NUT's 532 ROM should work fine though (the one i linked).
Thanks. will report later or tomorrow....
jaime4272 said:
Thanks. will report later or tomorrow....
Click to expand...
Click to collapse
I don't know what would have happened to your ZU and the only thing I would suggest is to flash [NUT]'s rom that lordmanhatton linked to. This will wipe any userdata so back up stuff (should leave photos/music etc I think) but you will lose passwords/wifi keys/account settings/etc
I so want to quote lordmanhatton and wake him up...
got it. thanks
I want to give thanks to LORDMAN. and every body for your help. I've got my phone working again by flashing with flashtool. just like you toll me LORD Thanks again.
Related
Hey, I'm on rogers in Canada and was having a hell of a time getting rooted 2.3.3 on my phone without unlocking the bootloader(no point in unlocking the BL for just root .... especially w/the warranty problems). I figured I'd give Working Root on 2.3.3 ! a try but had trouble finding the right firmware to downgrade to and when I tried to update OTA it kept failing after downloading and trying to install it (looked like it went all the way through the process but the phone would reboot and say "update failed").
1./ Did a clean install of the Xperia_Play_Release_Generic_UK.ftf (it's .184) with flashtool and then re-setup my apns to get 3g etc working. I downloaded the generic ftf off a thread on these forums but couldn't remember exactly which thread so I recompressed it and uploaded it to multiupload to make it a little easier to get all the needed files
2./ Rooted with Chainfire's Gingerbreak apk
3./ OTA update and it worked (before I did a clean install I was having the ota update fail, probably because I had removed a few system apps via root uninstall, I just made sure that all I did this time after the fresh install was root and then update)
Note on Gingerbreak: I've seen this exploit take 5 minutes or a few hours to grant root on devices. Be patient, if it's still hasn't worked try re-seating or swapping your memory card for a different one and try again. Also be sure you're on 2.3.2, SE patched gingerbreak in their release of 2.3.3.
[FAQ]
1./ I don't have ota updates available in my country, will this still work for me?
Answer: Yes, this installs the global firmware to your phone, after that your phone will look for global updates rather than carrier specific updates.
2./
nelly_boy said:
I used the above processes to get back to 2.3.2. All good but data dont appear to be working. Phone calls everything else is fine. Data is enabled but I never get G H or E in the status bar.
Any ideas? Do I neeed to get onto wifi to download carrier settings?!?!
Click to expand...
Click to collapse
Answer
step 1./ google your carriers apn settings
step 2./ enter them in settings/wireless & networks/mobile network settings/Access Point Names (make sure you set up your mms apn if you want working mms as well, info for your carrier is available on google, that's where I found mine.)
step 3./ Profit
ncaissie said:
Yes you can use wi-fi. and Like I said OTA is safe it is the PC update that bricks.
Just follow those steps. It's easier than I expected.
Edit:
The things not mentioned in the OP is that you need to download a file manager to install the Gingerbreak. And you need to enable the “Unknown Sources” in the apps settings to install Gingerbreak.
After it roots it will reboot and you should see a new app called Superuser in your app list.
Then get Titanium Backup to uninstall thing you don’t want or move apps fully to the SD card. If you are not in the UK the BBC player is no good to you. I think there is a thread with a list of apps you can safely remove
Click to expand...
Click to collapse
thanks just to clarify.
We can use a rogers branded xperia play and flash the uk firmware? will it not mess up anything?
RacecarBMW said:
thanks just to clarify.
We can use a rogers branded xperia play and flash the uk firmware? will it not mess up anything?
Click to expand...
Click to collapse
Not at all. You just have to re-setup your apn settings.
I'm using a Rogers Play on the UK firmware on a Bell sim card
Thanks for that man I'm gonna give it a go right now
update: hells yea boy! it worked! it worked! rooted 2.3.3!!!!!!!
Sent from my R800i using XDA App
Willis111 said:
Hey, I'm on rogers in Canada and was having a hell of a time getting rooted 2.3.3 on my phone without unlocking the bootloader. I figured I'd give Working Root on 2.3.3 ! a try but had trouble finding the right firmware to downgrade to and when I tried to update OTA it kept failing after downloading and trying to install it (looked like it went all the way through the process but the phone would reboot and say "update failed").
1./ Did a clean install of the Xperia_Play_Release_Generic_UK.ftf with flashtool and then re-setup my apns to get 3g etc working. I downloaded the generic ftf off a thread on these forums but couldn't remember exactly which thread so I recompressed it and uploaded it to multiupload to make it a little easier to get all the needed files
2./ Rooted with Chainfire's Gingerbreak apk
3./ OTA update and it worked (before I did a clean install I was having the ota update fail, probably because I had removed a few system apps via root uninstall, I just made sure that all I did this time after the fresh install was root and then update)
Click to expand...
Click to collapse
You beat me to the punch , I was gonna try that last night but was having connect to network problems.
@Emann56 - Was still your idea, just figured I'd try it with a fresh install of a different firmware and post my epic results. All thanks goes to you and whoever helped with your thread ofc and especially Chainfire!
thatsupnow said:
Thanks for that man I'm gonna give it a go right now
update: hells yea boy! it worked! it worked! rooted 2.3.3!!!!!!!
Sent from my R800i using XDA App
Click to expand...
Click to collapse
That was my reaction too Still can't wait for CM7 on this puppy though tbh.
Will this work in the Netherlands or will there be no OTA update available?
Willis111 said:
@Emann56 - Was still your idea, just figured I'd try it with a fresh install of a different firmware and post my epic results. All thanks goes to you and whoever helped with your thread ofc and especially Chainfire!
That was my reaction too Still can't wait for CM7 on this puppy though tbh.
Click to expand...
Click to collapse
Yea man I had cm 6.1.3 on my x10 and I loved it! Already loving the rooted 2.3.3!
Sent from my R800i using XDA App
awoken said:
Will this work in the Netherlands or will there be no OTA update available?
Click to expand...
Click to collapse
You would have to find that out for yourself, it's in settings/about phone/Software Update/Update Now. If this says no updates available then I guess OTA updates aren't available in that region at the moment.
Willis111 said:
That was my reaction too Still can't wait for CM7 on this puppy though tbh.
Click to expand...
Click to collapse
Oh god yes please. I miss my power control in notification and the screen on/off animations
thanks ma man worked like a champ.
awoken said:
Will this work in the Netherlands or will there be no OTA update available?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=14690329&postcount=29
that's what I think, basically your phone will stop asking for Netherlands ota updates and search the net for UK updates.
Willis111 said:
http://forum.xda-developers.com/showpost.php?p=14690329&postcount=29
that's what I think, basically your phone will stop asking for Netherlands ota updates and search the net for UK updates.
Click to expand...
Click to collapse
Willis111 is right, I performed the process here in the US today and no troubles finding the OTA update, despite the message there was no OTA before I flashed to .184 UK generic. Should work for you as well.
axiomjunglist said:
Willis111 is right, I performed the process here in the US today and no troubles finding the OTA update, despite the message there was no OTA before I flashed to .184 UK generic. Should work for you as well.
Click to expand...
Click to collapse
Thanks for confirming
Thanks for the thread. Just one question. I'm on 2.3.3 (no root) and dont want to wait longer for a working 2.3.3 GingerBreak. But i want to keep all my apps/settings. Can i downgrade to .184 UK generic without losing all my data?
Edit:
Another question:
1./ Did a clean install of the Xperia_Play_Release_Generic_UK.ftf with flashtool and then re-setup my apns to get 3g etc working.
Click to expand...
Click to collapse
If i dont do a clean install...what about the apns? Will they stay too? In my own thread:
http://forum.xda-developers.com/showpost.php?p=14705145&postcount=4
FrAsErTaG said that i can choose to not flash the userdata. I already found the option within the Flashtool. Are my apns a part of the userdata or will they get overwritten/deleted anyway?
Edit: Forget everything. It worked
I didnt wipe anything or "clean" my system. I just did the downgrade. After that, i got 1 issue. I always got this message: "android.process.acore has stopped". Google said that this is an issue with synchronize the contacts, etc. But i didnt freak out I just installed GingerBreak, did the root, then the OTA, and after OTA everything was fine again. Now i have full rooted 2.3.3
Willis111 said:
Thanks for confirming
Click to expand...
Click to collapse
Happy it works!
Thanks for the info, I can confirm that this procedure worked for me as well. I'm now running v2.3.3 Rooted with a locked bootloader on my originally locked R800a from Rogers!
How do you do an OTA update on Rogers if it is not here yet?
ncaissie said:
How do you do an OTA update on Rogers if it is not here yet?
Click to expand...
Click to collapse
My XPlay was originally purchased from Rogers. But since I've had it, I unlocked its network, flashed it with the Generic UK .184 firmware and Rooted it with GingerBreak v1.20. When I checked under "Settings\About phone\Software update\" and manually searched for an update, it was able to find it, download it and install it.
Sweet, Thanks
Updating the phone now. Hope it has the one-handed feature!
I would like a working FTF of this, I guess I should reconsider my rooting attempt and try the steps on the .475 rather than .471. Since my bootloader is unlocked, I have to use FlashTool for all updates until we have custom ROMs out.
E90 Commie said:
I would like a working FTF of this, I guess I should reconsider my rooting attempt and try the steps on the .475 rather than .471. Since my bootloader is unlocked, I have to use FlashTool for all updates until we have custom ROMs out.
Click to expand...
Click to collapse
Is it possible to Re-Lock the bootloader?
Request 475 FTF
E90 Commie said:
I would like a working FTF of this, I guess I should reconsider my rooting attempt and try the steps on the .475 rather than .471. Since my bootloader is unlocked, I have to use FlashTool for all updates until we have custom ROMs out.
Click to expand...
Click to collapse
I did not know that once the bootloader is unlocked you can no longer use Sony Bridge, now I am waiting for .475 FTF please, thanks
---------- Post added at 09:54 AM ---------- Previous post was at 09:33 AM ----------
E90 Commie said:
I would like a working FTF of this, I guess I should reconsider my rooting attempt and try the steps on the .475 rather than .471. Since my bootloader is unlocked, I have to use FlashTool for all updates until we have custom ROMs out.
Click to expand...
Click to collapse
Do I need special USB drivers for the FlashTool to work ?
yeeson said:
Request 475 FTF
Click to expand...
Click to collapse
Bro on the first main post. go to chech it out. now i m downloading. please try to make it root for us. thanks you soooooo much.:good:
Me also just update to latest 14.1.B.0.475 firmware, not sure what had been updates but obvious feel it run much smoother than before.
Possible only minor fine tunes / bugs fixed. Still running older UI.
Andrewtst said:
Me also just update to latest 14.1.B.0.475 firmware, not sure what had been updates but obvious feel it run much smoother than before.
Possible only minor fine tunes / bugs fixed. Still running older UI.
Click to expand...
Click to collapse
Screen sensitivity still there a bit...does your still does it?
kingrichards said:
Screen sensitivity still there a bit...does your still does it?
Click to expand...
Click to collapse
I only have slightly when in 1st initiate firmware.
It is completely gone for me when update to .471 which means no issue for me in .475
.475 seems to have better battery life. Waiting to complete my 1st full run.
avsquare said:
.475 seems to have better battery life. Waiting to complete my 1st full run.
Click to expand...
Click to collapse
.475 battery is far far better, now I am satisfied with the battery life.
How I can get update
Currently, my baseband is 14.1.B.0.461, how I can get update? Thx.
Ok, so after waiting a couple of weeks for an update from Bell since Sony released the firmware, I've decided to take the updating process into my own hands. Coming from a Nexus 4, waiting for updates is something that kind of frustrates me, so here is my questions:
I understand that the model bell has is the c6806. Now, will I run into problems trying to flash the stock Sony firmware from Bell's bloatwared up edition? Also, do I need a custom recovery, or can I keep stock? I really don't want to unlock my bootloader because it's taken me ages to download all the software and files I wanted... unless I do a backup, I suppose.
Update
eliasjg said:
Ok, so after waiting a couple of weeks for an update from Bell since Sony released the firmware, I've decided to take the updating process into my own hands. Coming from a Nexus 4, waiting for updates is something that kind of frustrates me, so here is my questions:
I understand that the model bell has is the c6806. Now, will I run into problems trying to flash the stock Sony firmware from Bell's bloatwared up edition? Also, do I need a custom recovery, or can I keep stock? I really don't want to unlock my bootloader because it's taken me ages to download all the software and files I wanted... unless I do a backup, I suppose.
Click to expand...
Click to collapse
I also have a Z ultra from Bell and I updated manually following these instructions without issue. Just download the FTF from http://forum.xda-developers.com/showthread.php?t=2453921. Pick model C6806 GENERIC US.
Then follow these instructions to flash using "Flashtools" http://forum.xda-developers.com/showthread.php?t=2428319
You don't need to download the XZU device folder because it's already incliuded in the new installation.
You don't need to unlock bootloader since it's from Sony but you won't be able to root your device and you will lost all your data. Except if you uncheck "Wipe Data" in Flashtools software, be it may decrease stability.
Hope this help.
---------- Post added at 09:50 AM ---------- Previous post was at 09:41 AM ----------
OMG WAIT DON'T UPGRADE YET. I need your FTF files, because I want to downgrade to 4.2.2, I need root for everything, like my PS3 Controller for touch emulation, to get rid of the navigation bar etc etc.
So please can you extract your FTF files from your Bell Device and send it to me !!!! PLEASE !!!!!
OTA availablenow
IchiGoQc said:
I also have a Z ultra from Bell and I updated manually following these instructions without issue. Just download the FTF from http://forum.xda-developers.com/showthread.php?t=2453921. Pick model C6806 GENERIC US.
Then follow these instructions to flash using "Flashtools" http://forum.xda-developers.com/showthread.php?t=2428319
You don't need to download the XZU device folder because it's already incliuded in the new installation.
You don't need to unlock bootloader since it's from Sony but you won't be able to root your device and you will lost all your data. Except if you uncheck "Wipe Data" in Flashtools software, be it may decrease stability.
Hope this help.
---------- Post added at 09:50 AM ---------- Previous post was at 09:41 AM ----------
OMG WAIT DON'T UPGRADE YET. I need your FTF files, because I want to downgrade to 4.2.2, I need root for everything, like my PS3 Controller for touch emulation, to get rid of the navigation bar etc etc.
So please can you extract your FTF files from your Bell Device and send it to me !!!! PLEASE !!!!!
Click to expand...
Click to collapse
Forget about what I said, I fixed it and BTW I just received the .290 via OTA, so you should have it now !!
IchiGoQc said:
Forget about what I said, I fixed it and BTW I just received the .290 via OTA, so you should have it now !!
Click to expand...
Click to collapse
LOL
Did you tried to keep root with supersu survival mode? And if so, did it work?
After hearing fo all the problems the .290 update brings (seemingly,) I think I will wait for kitkat. 4.3 jellybean isn't enough of an upgrade to justify the issues it will bring, or to lose root. KitKat definitely will be, though.
OTA failed lol
herogjan said:
LOL
Did you tried to keep root with supersu survival mode? And if so, did it work?
Click to expand...
Click to collapse
Meh, I tried but OTA failed installing each time. It fails at the begin of the install, phone reboots and tells me that it could not install the update. Probably because I have Dual Recovery and I debloated the rom ...... Oh well ... loll I'll probably try a factory reset and try the OTA again. I mean I have a nand backup anyway
I'll keep you posted
---------- Post added at 01:38 PM ---------- Previous post was at 01:12 PM ----------
Ok I tried a factory reset and it didn't work either, the progress bar reach near middle than it reboots. I bought the app for OTA survival but can't test it cauz I can't OTA ..... still trying to figure it out.
IchiGoQc said:
Meh, I tried but OTA failed installing each time. It fails at the begin of the install, phone reboots and tells me that it could not install the update. Probably because I have Dual Recovery and I debloated the rom ...... Oh well ... loll I'll probably try a factory reset and try the OTA again. I mean I have a nand backup anyway
I'll keep you posted
---------- Post added at 01:38 PM ---------- Previous post was at 01:12 PM ----------
Ok I tried a factory reset and it didn't work either, the progress bar reach near middle than it reboots. I bought the app for OTA survival but can't test it cauz I can't OTA ..... still trying to figure it out.
Click to expand...
Click to collapse
Does your revision number and product id still matches with your CDMA? With the OTA before mine update failed, but when i matched the product id and revision number OTA suceeded.
herogjan said:
Does your revision number and product id still matches with your CDMA? With the OTA before mine update failed, but when i matched the product id and revision number OTA suceeded.
Click to expand...
Click to collapse
Probably not I flashed a US Retail .532, i'm not on stock rom from Bell anymore. I will give it a try
---------- Post added at 02:55 PM ---------- Previous post was at 02:02 PM ----------
herogjan said:
Does your revision number and product id still matches with your CDMA? With the OTA before mine update failed, but when i matched the product id and revision number OTA suceeded.
Click to expand...
Click to collapse
Do you have any idea how to know the revision and CDMA code the update is looking for !?
IchiGoQc said:
Probably not I flashed a US Retail .532, i'm not on stock rom from Bell anymore. I will give it a try
---------- Post added at 02:55 PM ---------- Previous post was at 02:02 PM ----------
Do you have any idea how to know the revision and CDMA code the update is looking for !?
Click to expand...
Click to collapse
.532?
That OTA is for .257 then. That is 4.2 Not 4.3.
You could find it in BASKOU his CDMA thread. But really doesn't matter which CDMA you use. As long it is matching. The excellent guide from Lord can also help you further. You should defenitly have a look overthere.
Hum I'm positive that it's 4.3 take a look. I'm gonna take a look at his thread thanks
Sent from my C6806 using xda app-developers app
IchiGoQc said:
Hum I'm positive that it's 4.3 take a look. I'm gonna take a look at his thread thanks
Sent from my C6806 using xda app-developers app
Click to expand...
Click to collapse
Yeah, that's 4.3 Surpises me that you can update straight from 4.1 to 4.3. But thinking it over, it makes sense.
herogjan said:
Yeah, that's 4.3 Surpises me that you can update straight from 4.1 to 4.3. But thinking it over, it makes sense.
Click to expand...
Click to collapse
Oddly enough, I have yet to get the ota for 4.3. Been checking multiple times a day. Hopefully I don't run into issues, since I did root/ Detroit.
I received the ota because my cda product Id was changed when I flashed the Us retail. 532 so that's why you didn't receive it the build.prop you send me wasn't the same as what I had.
Sent from my C6806 using xda app-developers app
OTA is live, I however failed to update mine. Guessing it has to do with me debloating :/ Anyone know of a workaround?
EDIT: PC companion worked! If you run into the same issue, just use your PC
I'm stuck on the current 532 Chinese version and it's not letting me upgrade or downgrade.
Been over 6 hours flashing and flashing and I'm having problems with the HK/Asian versions of the stock rom.
Since downgrading from 4.3 to 4.2 my sim no longer works regardless. I'm not getting any signal regardless of what I do.
I bought my Xperia Z Ultra from UAE and would preferably want to use a UAE/Middle Eastern Rom.
Previously I had the FTF file for the Middle East and it worked wonders for me. Unfortunately I've removed and can no longer find it.
Should anyone be kind enough to upload the FTF file or even guide me to a working link I'd really appreciate it.
Thanks in advance.
C6802 or C6833 ?
Halim2k said:
C6802 or C6833 ?
Click to expand...
Click to collapse
6802. Thanks.
Here you go
XPERIA Z ULTRA C6802_14.1.B.1.532_GENERIC MEA.ftf
Oh, it looks like you've lost your IMEI, and that's why you're not getting a signal. This happens when you downgrade from 4.3 to 4.2. I have no idea why it happens, but it does, so follow this guide to restore your IMEI.
the problem may appear in some models. I downgraded mine from 4.3 to 4.2 without such problem.
p.s you can flash any firmware to your phone, no need to be in UAE. I live in Vietnam and I flashed European 4.3 on mine.
justsomebody said:
the problem may appear in some models. I downgraded mine from 4.3 to 4.2 without such problem.
p.s you can flash any firmware to your phone, no need to be in UAE. I live in Vietnam and I flashed European 4.3 on mine.
Click to expand...
Click to collapse
True, however, I had issues with the HK edition of the rom. It had some corruption or file missing since it would't allow me to properly root and when trying to boot in CWM it would't work.
Halim2k said:
Here you go
XPERIA Z ULTRA C6802_14.1.B.1.532_GENERIC MEA.ftf
Click to expand...
Click to collapse
Halim, thank you SO much bro, much appreciated.
LordManhattan said:
Oh, it looks like you've lost your IMEI, and that's why you're not getting a signal. This happens when you downgrade from 4.3 to 4.2. I have no idea why it happens, but it does, so follow this guide to restore your IMEI.
Click to expand...
Click to collapse
Correct, my imei was 000000000000000. I will refer to the link you provided. Thanks.
I've successfully UPGRADED to 532 Middle East version. :laugh:
Thanks to everyone for their support and response.
Unfortunately I'm not that technical with regards to flashing and such and usually I spend hours if not a whole day trying to solve a simple issue.
Usually when attempting downgrading, flashing and changing roms and using custom firmware I get stuck half way through.
This ends up with a half working phone, boot loops, etc...
This happened when trying to get the 290 firmware, rooted with root. The part with regards to using a dual recovery was not too clear and this resulted in a bricked device.
I'm now back to stock 532, rooted & happy. To be honest, I didn't see any big differences with 532 and 290.
I cannot live without root. My bootloader is locked and unlocking it is a pain in the ass, lol.
I will patiently wait for the proper update of Android 4.4 Kitkat until I decide on upgrading.
I can only hope there is an easy rooting method of 4.4 when it's released. I don't plan on backing up data, reinstalling everything again, etc...
Let's hope when 4.4 Kitkat is released there is an easy rooting method which doesn't require an unlocked bootloader. :laugh:
I bought Z2 today and it had 17.1.1.A.0.402 R7A firmware. the moment I connected to PC, it said I got an update and it was showing same build number. Took the risk of updating and the only change I found was Software ID change from R7A to R8A - rest all remain same.
any one can let me know if at all is a valid update (i beleive so as atleast software ID changed) and if so what are the changes? mine is 14W22
I remember it added Line app, and corrected h+ icon (previously it show LTE, which is wrong, I know my area don't have LTE yet). Other than that, I didn't notice any major different yet.
my software id is R10A, any significance to that? I only ask because I am not able to root this Z2 unlike my previous Z2s. towel root says it's not supported....still trying to figure out why.
chetly968 said:
my software id is R10A, any significance to that? I only ask because I am not able to root this Z2 unlike my previous Z2s. towel root says it's not supported....still trying to figure out why.
Click to expand...
Click to collapse
You should use easy root and manually add towelroot app in folder (latest version).
It'll work then.
Sent from my D6503 using Tapatalk
:silly:
funky0308 said:
You should use easy root and manually add towelroot app in folder (latest version).
It'll work then.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
So use easy root v9 and towelroot v3? I get the infamous M5 does not match error when I try that....maybe I'll try it on a different computer and see if that helps. I've disable my firewalls and uninstalled any antivirus programs but nothing helps this situation. I would think it would be easy to root. Very frustrating, once you root you cant go back :silly:
when you say add the towelroot app in folder, do you mean in the /files folder on the PC? Or in the easy root folder? Or install from phone?
chetly968 said:
:silly:
So use easy root v9 and towelroot v3? I get the infamous M5 does not match error when I try that....maybe I'll try it on a different computer and see if that helps. I've disable my firewalls and uninstalled any antivirus programs but nothing helps this situation. I would think it would be easy to root. Very frustrating, once you root you cant go back :silly:
Click to expand...
Click to collapse
Please remind me (in a hour or two) to check which version of easyroot I have used.
I think I had same problem with v9...
I'll check on my laptop as soon as I get home and will let you know...
Sent from my D6503 using Tapatalk
funky0308 said:
Please remind me (in a hour or two) to check which version of easyroot I have used.
I think I had same problem with v9...
I'll check on my laptop as soon as I get home and will let you know...
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
late reminder.. Please check
Frantiic87a said:
late reminder.. Please check
Click to expand...
Click to collapse
Hehe...It's really late...I'm at work now, I'll check when I get home..
Sent from my D6503 using Tapatalk
gbear said:
I remember it added Line app, and corrected h+ icon (previously it show LTE, which is wrong, I know my area don't have LTE yet). Other than that, I didn't notice any major different yet.
Click to expand...
Click to collapse
H+ was appearing as well earlier before the update. well, nothing changed for me
thanks for the reply.
Off topic but was finally able to root today with the latest ERT (v10) without any issues.