hello all i happen to want to run android on my asus a8n-vm csm. i have downloaded and burned the final version of android x86 which is Android-x86-4.3-devel. when i boot the cd i get to the screen where i can select the boot options but then it goes into detecting android x86 and doesnt get past that point at all. all it does is sit there and fill the screen with loading dots. the setup is an amd athlon 64 3500+ socket 939 overclocked to 2.50ghz, 2gb of ram, 120gb seagate hard drive, 256mb ati radeon x600 video card. what am i to do to be able to install and run the os on this computer. i would like to be able to have an android computer somehow.
Related
I have Toshiba netbook NB200-10z.. It is running with Intel Atom N280 1.6Ghz single core processor with 2 GB DDR2 RAM and a Intel GMA 950 GPU with 256MB RAM. I have currently dual boot system with Win 8.1 + Tiny 7 (light weight version of win 7).
Can I install third OS to use that is android? Can I install 4.4 on my system? Which one I should select from here http://www.android-x86.org/download
I will be able to install apps and games from play store or not? And is it possible to install it on USB flash drive rather than Hard Disk? If yes then how?
So that is the message I get when I do get into android. Through searching the web I found a lot of messages related to Remix 2.X that has similar issues. After the boot, I see the screen asking me to specify a language, then it goes black (Safe mode shows "SAFE MODE" in the upper corner of the screen) . Ater waiting for over an hour, I came back and clicked the mouse a couple times, get a message that the settings wizard is not responding. I can wait or cancel. If I wait, I go back to black screen indefinitely. If I cancel; I am prompted to select a language again, then back to black screen.
I tried reformatting the USB again... Older versions of the remix tool specify the need for FAT formatting, so I made sure that was the case. Reinstalled the ISO and tried again. Same issue.
The machine in question is an older Toshiba laptop, 64bit. No security settings in BIOS, not specifications to switch between UEFI and legacy so I assume it is just legacy (CSM).
Any tips would be much appreciated, I was excited to get this thing running on my son's laptop to give him some diversification...
Hi all, using a Samsung ativ pc pro xe700t1c-a04uk
dual boot: Windows 10 pro / android remix os 3.0
screen 11.6 full hd 1080p
cpu intel core i5-3317u quad core
ram 4gb
gpu intel hd 4000 (128mb dedicated)
hdd 256gb msata ssd
I run remix os 3.0 from a 64GB 544/MBs msata drive in a usb 3.0 enclosure.
Very fast system. Everything working including apps and games and all hardware (touchpen/touchscreen/gyro/accele/light/nfc/otg/gamepad/cam/mic/sound/gfx/etc).
Problem: Its not a major problem but the screen dimming or brightness control dosent work and thats the only problem.
The samsung ative pc pro xe700t1c is by far the most superior convertible laptop/tablet in the world!
Request to developers:
Can you please implement the sim function for internet and calling. Also can you please implement a gamepad configuration menu just like the keyboard config menu?
Thank you very much for all the good stuff remix team.
---------- Post added at 09:16 AM ---------- Previous post was at 09:15 AM ----------
hi all i thought this turorial might help you guys....
This is a working usb install media creator method for os remix installation and legacy bios circumventing all known errors made for noobs including USING full drive internal storage space etc.
You will be able to use this usb stick for future creation of other usb install media
you will have the choice to also install to hard drive
you will need 2 x usb drives and require drive write speed to be higher than 10 mb/s
the first drive will be the installer drive and the second will be the actual usb drive used to run remix os.
For first drive basic fat 32 install you will need rufus 2.9 usb boot media creator
after creation of the installer drive keep it safe i reccommend you use a 4gb drive $4/£2 off ebay but get something thats got a write speed higher than 10 mb/s or else install will fail!
Format the second drive to your liking ext 4 for example on your pc with minitool partition or acronis disk manager (make sure the drive is formatted as primary and set to active flag)
1. Create fat 32 usb boot disk with first usb drive and rufus 2.9 and the remix os iso
2.make sure after creation you boot up the usb drive and enter remix os then shutdown and boot up again to write the config files
3.make sure you dont boot up the ufi version of the boot up, only use the legacy version (it will have ufi next to boot drive in bios usb boot up list)
4.after you enter remix os go to settings and download the update (ota) (this is the main fix)(if this update fails you cannot proceed further with instructions)(DOSENT APPLY TO REMIX OS 3.0+ INSTALLATION)
5. After ota update reboot and enter remix os again and let android upgrade
6.after this stage is complete your fat32 remix os usb bootable drive is ready to create a usb drive that runs remix os from the drive itself.
7.insert the second drive in a usb hub and boot up the computer with both drives in the computer and boot from the first drive (the usb remix os installer drive)
8.boot up and at the grub boot menu (it should look blue with yellow writing not the black ufi version) press tab and type: INSTALL=1
9. then press enter then you will enter usb media creation menu select scan usb drives and select the second drive (the remix os running drive)
10. It will ask you what you want to format the drive as so select do not format option (becus you already formatted it)
11.then it will ask you to install first grub boot menu say yes
12. Then it will ask you to install second boot grub efi menu say yes
13. Next it will ask you if you want to format the boot partition or something like that say *** no ***
14. Then it will ask you if you want read/write privelage say yes
15. It will proceed to write the remix os onto the drive
16. When finished it will ask to restart (at this point i just switch the pc off by holding power button then restart and boot off the new second drive to run the os from it already upgraded too)
note: If wanting ntfs version of remix os then its a little complicated than this and you will need to use imgtools to increase the data.img file on the ntfs drive after creation with the first usb media creator drive.
The remix os ota update addresses the boot media creation errors. After the ota update all drives created with the grub menu installer boot up as they should but only ufi boot up option hangs!
Hope this helps hit the thanks dont forget so i know how many people were helped by this! enjoy.
I have the ativ pc pro xe700t1c the uk version with intel core i5 quad core and its also a convertible tablet with msata ssd as hdd drive and as you all probbaly know android was created for fast flash memory and linux format os so the best combination is an ssd and ext4 linux file format. I have a 64gb 544 mb/s msata drive in a usb 3.0 enclosure which i use to boot remix os and run it off it. Its perfectly smooth and fast enough 5 secs to boot and the ativ pc pro convertible laptop/tablet is fully compatible hadware software wise, no problems at all. The 5 year old Ativ pc pro gets 119,000+ score in antutu benchmark same as the latest LG G5 with the latest adreno 530 gpu/snapdragon 820 cpu which costs approx £600 now in retail!!! I bought the Ativ pc pro convertible laptop/tablet for only £200 two weeks ago with accessories (ethernet dock etc) worth alone £100 on its own off ebay!!! On top of all that its also a windows 10 pro convertible laptop/tablet system which on its own without android was initially worth £1200 five years ago and still costing approx £500 even now in retail. So what im trying to say here is that for only £200 i get a £600 android 6.0 laptop/tablet and i also get a £500 windows 10 pro laptop tablet ALL IN ONE. Muahahahahahaha haaaaa hahahaha kekekeke.
The PC in question is my Acer Aspire 1810TZ, which has a 64-bit processor. Specs are as follows:
CPU: dual core Intel Pentium SU4100 / 1.3 GHz
Cache: L2 - 2 MB
Bus: 800 MHz
Chipset: Mobile Intel GS45 Express
I tried running Remix 3 (v206) on it from a USB 3 stick just to make sure it worked prior to installing it. To prepare the USB, I downloaded it from a Windows 10 partition on the laptop, and used the installer to install it on the USB stick. It starts out OK, but goes fairly quickly to a blank screen. I then tested this same USB on a Dell xps 13 and it worked fine. What I did next was to download the 32 bit version, again from the Windows partition of the Acer. This one ran OK, and I was able to use it to install on an SSD partition in the Acer. Given that this laptop is 64 bit, why shouldn't the 64 bit version of Remix run on it?
I downloaded ''release_Remix_OS_for_PC_Android_M_64bit_B2016112101'' and installed it on a Flash disk Kingston microDuo 3.0 32GB. I tested it on my Laptop, an HP 250 G4, with 4GB RAM, 500GB HDD and WIN 10 1607 64 Bit installed on it (BIOS : LEGACY). It loaded correctly, found my wi-fi card and connected to Internet. I installed Google Play and some apps. The only problem was may times the message ''not responding'', but I choose to wait and then all was ok again.
Then, I shut down Remix OS, took the flash drive and connected it to my daughters 2 in 1 Tablet, Lenovo MiiX 3 1030 (2GB RAM, 32GB ROM, WIN 10 1607 Home 32 Bit, but with 64 Bit Intel CPU, BIOS : UEFI), to see if there works also. I entered Boot Setup, choose to boot from flash drive. It loaded correctly, with no error message at all. Although smaller from my laptop, Remix OS playing smoothly on the tablet !! The only problem was that it did not regognised the wi-fi card of the tablet, so I choose to make restart the Remix OS. After the restart appeared a serious problem on the tablet !! The screen, in any mode appears in 3 pieces !! The left one, like mirror the up and down piece, while on the right side appears vertical bars !! Remix OS something done to the monitor or the display card of the tablet. It is hardware, because the 3 pieces appearing and when the tablet is off and I push the power button and appears the battery status, and when I enter in Bios Mode, and when I enter in Windows 10 (so it is not software or driver problem from the Windows side, I think) !!
In both cases, Remix OS did not recognised Bluetooth.
Any suggestions or solution ??
Please help asap, I can't fight my daughter
Thanks in advance
Did you try unplug the battery from the tablet?
so i have a linx vision, its a windows 10 tablet and specs are.
intel x5 8300 w intel hd gpu and 2gb ddr3 1600mhz
its 32bit firmware on the bios, i have had secure boot off and had remix os installed to an sd card but keeps failing to boot
can anyone help me to get android running on my device? i have also tried to use androidx86 live iso but that wont do squat...
any help would be grrreat