Hello,
I used foxfi and it said I needed to set up a lock screen. I did however I don't want my lock screen anymore as I rarely use foxfi(didn't used to require the lock screen).
I went to settings, security, encryption level - my only 3 choices are pattern, pin and password - none is greyed out.
boe said:
Hello,
I used foxfi and it said I needed to set up a lock screen. I did however I don't want my lock screen anymore as I rarely use foxfi(didn't used to require the lock screen).
I went to settings, security, encryption level - my only 3 choices are pattern, pin and password - none is greyed out.
Click to expand...
Click to collapse
Turns out I had to force stop foxfi and clear credentials.
Related
I like using WidgetLocker and it's been working generally well until I realized it does not replace the default lockscreen. After my 3 minute screen timeout for my Droid 2 to lock up, I have to unlock using WidgetLocker and then the default lockscreen. Is there a way so that I do not see the default lockscreen itself? BTW, I am using a pattern lock.
I use an app called "no lock" and it works really well.
I'm the dev of WidgetLocker.
The issue you are experiencing is because the standard swipe unlock is tied to the pattern (and pin and password) security on Motorola phones. I haven't yet found a way around this. There's two methods I may use to solve this (possibly both options)
1) Implement security into WidgetLocker.
2) Use root to bypass the intermediate swipe unlock
The advantage of using the system's security is that it's for sure protected at phone boot, it's harder for a third-party-app to guarantee that. The advantage of WidgetLocker's own security is that it wouldn't require root (Then again maybe it would for at-boot protection) and would allow more options.
I don't know when I will have a solution to this, I just know it will NOT be in the next update. If you just purchased and this issue is causing you to not use WidgetLocker email me ([email protected]) with your order number (and mention this thread) and I can cancel/refund the order.
No Lock will disable your security. I don't remember offhand if LockBot Pro just completely bypasses the security or has the same issue, but it doesn't solve the problem.
Thread moved to General.
Alright, thanks guys for the good info. I'll continue to use WidgetLocker just because I like it that much, and I hope a solution can be found some time in the future. Thanks!
So, any updates? I'm now unlock homescreen 3 times ). Widgetlocker+Standart_SlideLocker+Pattern. Temporary removed widgetlocker.
[email protected] said:
I'm the dev of WidgetLocker.
The issue you are experiencing is because the standard swipe unlock is tied to the pattern (and pin and password) security on Motorola phones. I haven't yet found a way around this. There's two methods I may use to solve this (possibly both options)
1) Implement security into WidgetLocker.
2) Use root to bypass the intermediate swipe unlock
The advantage of using the system's security is that it's for sure protected at phone boot, it's harder for a third-party-app to guarantee that. The advantage of WidgetLocker's own security is that it wouldn't require root (Then again maybe it would for at-boot protection) and would allow more options.
I don't know when I will have a solution to this, I just know it will NOT be in the next update. If you just purchased and this issue is causing you to not use WidgetLocker email me ([email protected]) with your order number (and mention this thread) and I can cancel/refund the order.
No Lock will disable your security. I don't remember offhand if LockBot Pro just completely bypasses the security or has the same issue, but it doesn't solve the problem.
Click to expand...
Click to collapse
i know it's an old thread and problem, but i thought i'd just throw this idea out there...
my current security solution for Motorola phones (Droid X and Bionic) is to enable PIN security. this means that i do not have to depend on a third party app to lock my phone down at boot (which is difficult as you point out).
while using my phone at home, i temporarily disable the PIN security using Switchpro widget's "Auto ScreenLock" toggle (i think No Lock work too). when my phone is rebooted, the Motorola security is automatically active again, and i have to select Switchpro widget again to temporarily disable the PIN security if i choose, or i can leave it enabled if i'm at work or someplace else where the likelihood of losing my phone is increased.
unfortunately this means i can't really use WidgetLocker because whenever i' have PIN security enabled, i have to deal with the extra swipe of the stock lock screen. yes, the new feature for auto-swiping works and is cool, but it's a bit slow and awkward.
Possible solution: if WidgetLocker included a separate post-boot security PIN feature that was reasonably secure while the phone is on (and without disabling the stock security PIN), then i would be in heaven. this would allow me to leave system security PIN in place (protecting me during boot), i would have to swipe and enter my PIN twice the first time i enter my phone after boot (once for system PIN, once for WidgetLocker), then i could disable the system PIN via Switchpro widget (or No Lock) and only have the WidgetLocker PIN on subsequent attempts to unlock my phone until the next reboot. i used exactly this process on my Droid X with LockBot Pro, but LockBot Pro is not compatible with the Bionic.
is this description even remotely clear? i realize that it might be a confusing sequence for some folks, but it would totally address the issue of security during boot and post-boot while also being able to use this excellent app on Motorola phones.
just a thought...
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Hi,
I got the same problem as the threadstarter. Any progesses made? Teslacoil hompage says:
Can I use WidgetLocker with a security lockscreen?
Yes, but it depends on your configuration. Some devices force their own slider, before the security slider. This means WidgetLocker, then system slider, then system security. Generally Samsung and HTC devices don't have this issue, and other devices don't have this issue when using Pattern security rather than PIN or Password. WidgetLocker includes a work around for root users to "auto-swipe" the system slider.
Click to expand...
Click to collapse
On my Galaxy S2 this workaraound does not auto-slide the systemslider... What's wrong with it?
Have a Atrix 2 here and as PhilDX said, it is kinda slow and awkward. When I have the pattern security active and swipe the Widgetlocker lock, it kinda "flashes" my homescreen then goes to the pattern. Also, even though I have autoswipe enabled, but sometimes the original lockscreen pops up.
Great program though, LOVE that I can put widgets on the lockscreen^^
Hello, My phone is SGS2-GTI9100G model.
Can I ask any method to prevent exit active applications from the task manager?
I have a similar problem
[email protected] said:
I'm the dev of WidgetLocker.
The issue you are experiencing is because the standard swipe unlock is tied to the pattern (and pin and password) security on Motorola phones. I haven't yet found a way around this. There's two methods I may use to solve this (possibly both options)
1) Implement security into WidgetLocker.
2) Use root to bypass the intermediate swipe unlock
The advantage of using the system's security is that it's for sure protected at phone boot, it's harder for a third-party-app to guarantee that. The advantage of WidgetLocker's own security is that it wouldn't require root (Then again maybe it would for at-boot protection) and would allow more options.
I don't know when I will have a solution to this, I just know it will NOT be in the next update. If you just purchased and this issue is causing you to not use WidgetLocker email me ([email protected]) with your order number (and mention this thread) and I can cancel/refund the order.
No Lock will disable your security. I don't remember offhand if LockBot Pro just completely bypasses the security or has the same issue, but it doesn't solve the problem.
Click to expand...
Click to collapse
My (unrooted) Samsung Stratosphere's Default lockscreen keeps Activating and overriding WidgetLocker. WidgetLocker doesn't even show up or if it does it pops up after I've already unlocked the phone. I have tried setting WL homehelper as home but default still replaces it, then widgetlocker locks the screen at random while I'm in the middle of something. I also tried no lock which disabled all lockscreens temporarily before stock kicked in and locked the phone. is there a way to fix this without root?
I added a pin code to lock my device but when I tried to go back into settings to remove the code, there were no options anymore to enable/disable lockscreen pin/password. Fortunately for me my pin was not a long one but my OCD is keeping me from enjoying my device since now I realize the device has a lockscreen bug.
I just yesterday changed the lockscreen setting to a PIN and reverted back to "Unsecure". I'm on KM7 and it was done under "Security" in "Settings", every option was available there.
Did you by any chance encrypt your tablet? It's not possible to use the encryption feature and not have a PIN or passphrase.
gokpog said:
I just yesterday changed the lockscreen setting to a PIN and reverted back to "Unsecure". I'm on KM7 and it was done under "Security" in "Settings", every option was available there.
Did you by any chance encrypt your tablet? It's not possible to use the encryption feature and not have a PIN or passphrase.
Click to expand...
Click to collapse
I didn't encrypt the tablet (that takes about an hour and I did my 4 digit pin in a few seconds) but when I went back into "Location & Security" the option to set lockscreen password no longer was present. I am using a stock Wi-Fi 16GB model that I bought at Staples when they had the $100 off coupon.
I had to do some research and apparently I am not the only one having this problem.
http://androidforums.com/samsung-galaxy-tab-10-1/387231-lock-screen-bug.html
leo876 said:
I added a pin code to lock my device but when I tried to go back into settings to remove the code, there were no options anymore to enable/disable lockscreen pin/password. Fortunately for me my pin was not a long one but my OCD is keeping me from enjoying my device since now I realize the device has a lockscreen bug.
Click to expand...
Click to collapse
I had this same problem on my GTab2 7.0 running stock ICS. Super frustrating. I finally realized it was being caused by my having an Exchange account for my employer's email that was enforcing a policy of not removing the lock screen security. This was even though I didn't have a password and didn't need one when I set it up. I uninstalled Touchdown (my Exchange account) and the "none" option reappeared. After removing the lock screen security, I reinstalled Touchdown and now everything works fine again without a lock screen pin.
Is there any way to use FoxFi without setting up a screen lock? When I bring it up, it says a screen lock is required, and pattern lock is preferred. I don't like to use screen locks on the S4.
If I do set up a screen lock, pattern or input, can I later set it back to no screen lock. I set up one on my old Droid Bionic, and there was no way to get it back to no screen lock short of a complete reload.
Or is there another tether program that I can use. Either wireless or USB would be fine.
Thanks,
Errol
Hello,
I had tried a password, then I switched it to PIN. I realize I don't really want a lock at all but the top option to disable it is greyed out - my only three choices seem to be to switch between PIN, password and patten. I'm guessing there is another place to disable it but I can't find it.
Thanks
boe said:
I had tried a password, then I switched it to PIN. I realize I don't really want a lock at all but the top option to disable it is greyed out - my only three choices seem to be to switch between PIN, password and patten. I'm guessing there is another place to disable it but I can't find it.
Click to expand...
Click to collapse
Settings -> Lock Screen -> Select Screen lock -> none
NedDasty said:
Settings -> Lock Screen -> Select Screen lock -> none
Click to expand...
Click to collapse
Yes - that is the problem the top selection - NONE is greyed out. I can only select between pattern, pin and password.
ALL items but the bottom 3 choices on that screen are greyed out.
boe said:
Yes - that is the problem the top selection - NONE is greyed out. I can only select between pattern, pin and password.
ALL items but the bottom 3 choices on that screen are greyed out.
Click to expand...
Click to collapse
You have an application installed that requires a password.
Maybe you have an exchange account and the policies are set, something.
I can disable the password on my phone with no issues.
tech_head said:
You have an application installed that requires a password.
Maybe you have an exchange account and the policies are set, something.
I can disable the password on my phone with no issues.
Click to expand...
Click to collapse
Thanks - it was foxfi that made me enable the screen lock so I uninstalled foxfi but I still can't disable it.
boe said:
Thanks - it was foxfi that made me enable the screen lock so I uninstalled foxfi but I still can't disable it.
Click to expand...
Click to collapse
Go into "Settings"
Then "Security"
Then "Phone Administrators"
Then you will need to deactivate "Foxfi" as a device admin, by selecting it then deactivating it.
If that doesn't work, I'm at a losss.
tech_head said:
Go into "Settings"
Then "Security"
Then "Phone Administrators"
Then you will need to deactivate "Foxfi" as a device admin, by selecting it then deactivating it.
If that doesn't work, I'm at a losss.
Click to expand...
Click to collapse
Thanks - I looked there - I have email - which has always been there and android device manager.
It turns out it was indeed foxfi. I went to security - clear credentials and it worked!!
Hy.
Some time ago I enabled the autolock feature and since i didn't use it for a while i forgot the pattern
Anyways, i have access to both the watch and the phone and i would like to remove or change the lock pattern but it keeps asking for the old pattern (which i forgot).
So, is there any way to remove the pattern set in Samsung Gear app on the phone ? (under Settings->Auto lock).
Thanks in advance.
P.S. as long as the watch is near the phone i can access the phone without problems, hopefully i don't have to do a factory reset on the phone. Also, the phone is a Note 3 if it matters.
After many trials and errors i managed to remove the lock.
The trick was to get to the Android Device Manager page ( https://www.google.com/android/devicemanager ) and lock the device, this overrides the smart lock set by Samsung Gear. After unlocking the device with the new lock i was able to modify the locking pattern by going to Settings -> Device->Lock Screen->Screen Lock
Note, to use the AutoLock feature you have to set the screen lock to be "Auto lock" option.
So, as long as you can access your device through Android Device Manager you can reset the lock pattern.