[Q] Bell Stock Firmware With Knox - Samsung Galaxy Mega

I'm desperately hoping that someone, somewhere can provide a stock firmware for the Bell SGH-I527M that includes knox. Maybe someone from sammobile is reading this and can post it there. I took the OTA update a week ago, then rooted the phone and flashed CWM recovery on it, no problem at all. Everything was running fine.
Yesterday, I thought I'd give the unofficial CM11 ROM a go, so I took a backup and tried flashing CM11 from CWM - failed. So I thought, "No problem, I'll just restore my backup I made ten minutes ago." That, too, failed. I had nothing to go back to since I was trying to do a super-clean flash of CM11 - wipe data/factory reset, format data, format sdcard, all the steps that I've taken a million times flashing different ROMs on different Samsung phones. So I effectively had no OS on the phone, just recovery.
Went to Sammobile and downloaded the only stock firmware they have available for this device for this carrier. Flashed through Odin and on reboot, got the "secure fail kernel - image size too large" error message. Also tried the emergency firmware recovery through Kies and got the same thing.
So basically, I'm completely stuck. The only thing I can get to boot up is download mode. Does anyone know if there is a different firmware I can flash through Odin to get this device up and running again? I'm given to understand that this has something to do with knox security. That since I took the OTA last week, it updated knox security, then when I flashed the stock firmware from sammobile, this is actually an older firmware that does not include knox. I'm hoping that someone has access to the newest stock firmware for this device for Bell with knox that I can flash through Odin to get back up and running.
Any help would be greatly appreciated.
Thanks in advance,
-GB

GladdBag said:
I'm desperately hoping that someone, somewhere can provide a stock firmware for the Bell SGH-I527M that includes knox. Maybe someone from sammobile is reading this and can post it there. I took the OTA update a week ago, then rooted the phone and flashed CWM recovery on it, no problem at all. Everything was running fine.
Yesterday, I thought I'd give the unofficial CM11 ROM a go, so I took a backup and tried flashing CM11 from CWM - failed. So I thought, "No problem, I'll just restore my backup I made ten minutes ago." That, too, failed. I had nothing to go back to since I was trying to do a super-clean flash of CM11 - wipe data/factory reset, format data, format sdcard, all the steps that I've taken a million times flashing different ROMs on different Samsung phones. So I effectively had no OS on the phone, just recovery.
Went to Sammobile and downloaded the only stock firmware they have available for this device for this carrier. Flashed through Odin and on reboot, got the "secure fail kernel - image size too large" error message. Also tried the emergency firmware recovery through Kies and got the same thing.
So basically, I'm completely stuck. The only thing I can get to boot up is download mode. Does anyone know if there is a different firmware I can flash through Odin to get this device up and running again? I'm given to understand that this has something to do with knox security. That since I took the OTA last week, it updated knox security, then when I flashed the stock firmware from sammobile, this is actually an older firmware that does not include knox. I'm hoping that someone has access to the newest stock firmware for this device for Bell with knox that I can flash through Odin to get back up and running.
Any help would be greatly appreciated.
Thanks in advance,
-GB
Click to expand...
Click to collapse
If someone with this new update and root could dump some images i could make an odin tar for yall.

GladdBag said:
I'm desperately hoping that someone, somewhere can provide a stock firmware for the Bell SGH-I527M that includes knox. Maybe someone from sammobile is reading this and can post it there. I took the OTA update a week ago, then rooted the phone and flashed CWM recovery on it, no problem at all. Everything was running fine.
Yesterday, I thought I'd give the unofficial CM11 ROM a go, so I took a backup and tried flashing CM11 from CWM - failed. So I thought, "No problem, I'll just restore my backup I made ten minutes ago." That, too, failed. I had nothing to go back to since I was trying to do a super-clean flash of CM11 - wipe data/factory reset, format data, format sdcard, all the steps that I've taken a million times flashing different ROMs on different Samsung phones. So I effectively had no OS on the phone, just recovery.
Went to Sammobile and downloaded the only stock firmware they have available for this device for this carrier. Flashed through Odin and on reboot, got the "secure fail kernel - image size too large" error message. Also tried the emergency firmware recovery through Kies and got the same thing.
So basically, I'm completely stuck. The only thing I can get to boot up is download mode. Does anyone know if there is a different firmware I can flash through Odin to get this device up and running again? I'm given to understand that this has something to do with knox security. That since I took the OTA last week, it updated knox security, then when I flashed the stock firmware from sammobile, this is actually an older firmware that does not include knox. I'm hoping that someone has access to the newest stock firmware for this device for Bell with knox that I can flash through Odin to get back up and running.
Any help would be greatly appreciated.
Thanks in advance,
-GB
Click to expand...
Click to collapse
im in the same boat lol....any luck bro?

Nubsta said:
im in the same boat lol....any luck bro?
Click to expand...
Click to collapse
See this thread:
http://forum.xda-developers.com/showthread.php?t=2461203

Related

[Q] Galaxy S3 O2 (UK) 4.3 Update Problem - Stuck on Blue Samsung Logo

Hi,
Firstly I apologise if this has been covered before but I have searched and searched and still not found what I am looking for.
I received the OTA update for my Galaxy S3 I-9300 ( UK Version on O2 Carrier, Stock ROM), phone downloaded automatically (all good), clicked install when prompted (i believe this was a relatively small update file). I presume the phone was running 4.2 when I decided to update and this was the update to 4.3 (not sure). The phone started the firmware upgrade process all went well, the % got to 100 and the phone went to reboot. But when the phone went to reboot it stuck on the blue Samsung logo screen. Left it for a couple of hours just in case, no joy.
Having not backed up all before doing the update (as usual presumed it would be fine) I now am in the situation where I may well lose all my data, this at the minute is my LAST option. Have a few fairly valuable things on this eg. notes from meetings etc. and some photos I would like. So a factory reset from recovery mode isn't what I want to do at the minute.
I have tried to recover the phone using Samsung Kies, no joy again. With the state the phone is in it wont recognise the device and keeps bringing up an error with the USB MTP driver (have tried reinstalling the driver many times). When i put the phone into download mode (volume down, home and power) it says on Kies it is connecting, but again fails to connect. It seems the last option I am left with is to use the 'update via external storage' mode when in recovery or the 'update via ADB'? I have also tried contacting both O2 and samsung to see if they can provide me with the firmware update file that I can download and put on an SD card, but they both keep sayin each other is responsible for the firmware etc etc. I have since downloaded a rom from Sammobile.com and found a UK 4.3 rom to be installed via ODIN (not sure if this will work?)
So, I am wondering if there is any way I can recover the data from the device without losing both app data and photos/videos etc that I have not yet tried? or if anyone can guide me as to where I could get the update file to use via external storage? (and if this will work) or if using the ADB function is a possibility (dont know what it is even) Any help is much appreciated as I seem to keep going round in circles, and apologies if I have not given vital information.
Thanks,
jjohnston890
If you don't mind losing warranty you can flash a custom recovery using odin, I'd recommend Philz, then use that to access the aroma file manager. You can then transfer all your data to the external sd.
Read philz thread for instructions.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If you don't mind losing warranty you can flash a custom recovery using odin, I'd recommend Philz, then use that to access the aroma file manager. You can then transfer all your data to the external sd.
Read philz thread for instructions.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Not really bothered about warranty as it seems that is the only way to get the data back. Although using aroma file manager am I able to get app data back? ie. when I restore the app do I have the option to do so with data? as its particularly a few notes in colournote app that I have.
Had a look for Philz Recovery, looks like it'll do the trick thanks, but could you link me just in case I've the wrong one please?
http://forum.xda-developers.com/galaxy-s3/orig-development/i93xx-philz-touch-t2002953
Thanks :fingers-crossed:
That is the Philz thread. Aroma file manager only moves files -it won't backup or restore anything. You will have to know which files to look for.
boomboomer said:
That is the Philz thread. Aroma file manager only moves files -it won't backup or restore anything. You will have to know which files to look for.
Click to expand...
Click to collapse
Ok, so I will want to move all files to the SD card and look for the app data files etc I need? how would I go about getting all my contacts aswell, can this be done through Aroma? Is this just a matter of searching through all files?
After installing custom recovery (philz) would I be able to flash the generic ROM (through ODIN) without wiping the phone? Or what are the chances this will brick the phone? Ideally it would be good if I could get the phone to the same state as it were in before the update, but I cant find if this is ROM is non wipe?? I would like to stick with the generic rom but if I had to re-flash after flashing a non wipe I could?
Again, apologies for the amount of questions but you seem to know your stuff :good: much appreciated
Contacts should be saved on your Google account, you will just have to search for anything else you need.
You can flash what ever you choose with odin, it's just highly unlikely to boot without a factory reset. First try the exact same firmware you had before the wipe, if you know it.
I'd advise you backup the efs folder in philz before you flash anything. If the dirty flash doesn't work then flash the latest BTU 4.3 firmware and factory reset.
I don't think a flash through Odin will wipe your internal SD. I believe it only wipes the data partition which stores thr app data and stuff. Pics and vids etc are safe. Changing CSC will wipe it though.
boomboomer said:
Contacts should be saved on your Google account, you will just have to search for anything else you need.
You can flash what ever you choose with odin, it's just highly unlikely to boot without a factory reset. First try the exact same firmware you had before the wipe, if you know it.
I'd advise you backup the efs folder in philz before you flash anything. If the dirty flash doesn't work then flash the latest BTU 4.3 firmware and factory reset.
Click to expand...
Click to collapse
Contacts aren't saved on my google account, have them mostly saved on my phone just, so il have to have a good search through with aroma.
I found a post that said flashing the firmware I had before the update wouldn't work but the latest or a later version might...
Samsung are to get back to me in relation to giving me a downloaded version of the incremental update file, would anyone on here be able to provide a version of this do you think? in order to apply the offical update again via external storage.
whatsgood said:
I don't think a flash through Odin will wipe your internal SD. I believe it only wipes the data partition which stores thr app data and stuff. Pics and vids etc are safe. Changing CSC will wipe it though.
Click to expand...
Click to collapse
So if i go from a stock rom with o2 branding to a non branded generic rom from samsung you think this will wipe it? (as this is a change of CSC?) is there any way to flash through ODIN and not wipe data partition either or is this the way it always happens?
Help/Advice
Was going to bite the bullet and flash custom recovery and flash the stock Samsung ROM through ODIN tonight, but it seems that if I do, it will change my CSC code? This as been told on here will wipe me phone. I am unable to get a stock O2 4.3 ROM at the minute but I can get a 4.1.2 ROM? Will this work is it worth waiting to see if I can get a 4.3 ROM soon and then if I flash this wont (hopefully :fingers-crossed wipe my phone?
Any advice appreciated. As stated before I cannot really afford to lose the data on phone (app data included )
Thanks
jjohnston890 said:
Was going to bite the bullet and flash custom recovery and flash the stock Samsung ROM through ODIN tonight, but it seems that if I do, it will change my CSC code? This as been told on here will wipe me phone. I am unable to get a stock O2 4.3 ROM at the minute but I can get a 4.1.2 ROM? Will this work is it worth waiting to see if I can get a 4.3 ROM soon and then if I flash this wont (hopefully :fingers-crossed wipe my phone?
Any advice appreciated. As stated before I cannot really afford to lose the data on phone (app data included )
Thanks
Click to expand...
Click to collapse
Your o2 4.3 rom is here, you will need to register to download, you can flash direct with Odin without a custom recovery, it wont wipe your phone, SAMMOBILE
If you want a generic one without o2 bloatware then use this one HERE
ag4751 said:
Your o2 4.3 rom is here, you will need to register to download, you can flash direct with Odin without a custom recovery, it wont wipe your phone, SAMMOBILE
If you want a generic one without o2 bloatware then use this one HERE
Click to expand...
Click to collapse
Thanks very much...dunno how I missed that, i had the H3G version downloaded. Ok, will flash later on, still nervous about it wiping the phone though so that is why i wanted to install custom recovery to gain aroma file manager etc...
With custom recovery I tried to install but get the error message-
E:failed to verify whole-file signature
E:failed to verify whole-file signature
E:signature verification failed
Any ideas? Tried 2 different SD cards but didnt make a difference, although neither of these have been in the phone before?
Philz recovery - philz_touch_6.19.3-i9300.zip
Thanks
If you downloaded a firmware from Sammobile.com then it will not be flashed with a custom recovery, go read the sticky guides in general on how to use odin.
You will still need to factory reset before the new firmware will boot, so use philz to remove all your files before you flash.

Problem with installing stock firmware

Hi,
I have a S3 model GT-I9305 (2GB) for like 7 months. It had 4.3 version installed, and I wanted to downgrade to 4.1.2 or 4.2.2. In the about menu Baseband version was i9305xxuemk1. Phone does not have any recovery software installed, except the default Odin download mode (Home+Down+Power), and I am able to enter it.
Since I am not sure for which country / carrier the phone is made (here people sell everything from everywhere), I do not know the original version of ROM, and there is no official ROM for my country (sammobile / Serbia). I have tried several 4.1.2 ROMs for different zones, and almost all of them failed, except for one - I9305XXALI5_I9305EVRALI5_EVR, which is reported as successful installation in Odin, but after restart it hangs on samsung logo.
Anyone has any ideas?
So, it seems that I can install any 4.3 version, but cannot install any 4.1 version. Some fail on nand, most fail on sboot. Any ideas? Basically what I do is, put the phone into download mode, and load firmware in odin and flash it.
Don't install 4.1 roms.
After you flash in odin boot into recovery and do a factory reset and and wipe cache and delvik cache then reboot
I am not sure what you mean? My goal is to install 4.1.2 version.
I have followed instructions from this link, but it doesn't work. In final step, when I need to go into recovery mode (Up+Home+power), I cannot enter it, it just hangs on samsung logo.
However, this link helped, I was able to downgrade using Odin mobile
Goran_ said:
I am not sure what you mean? My goal is to install 4.1.2 version.
I have followed instructions from this link, but it doesn't work. In final step, when I need to go into recovery mode (Up+Home+power), I cannot enter it, it just hangs on samsung logo.
However, this link helped, I was able to downgrade using Odin mobile
Click to expand...
Click to collapse
Why do you want to downgrade all the way down to a 4.1 rom.
Are you sure you are powering off then entering the combo to start it?
Because I have a major battery drain, which last from 6-10 hours, depending on usage (mostly calls 1-2h, very rarely internet). Hard reset did not help.
As I have learned, it is a known KNOX problem, that I was not aware of (I also have another S3, which does not have KNOX on it).
Goran_ said:
Because I have a major battery drain, which last from 6-10 hours, depending on usage (mostly calls 1-2h, very rarely internet). Hard reset did not help.
As I have learned, it is a known KNOX problem, that I was not aware of (I also have another S3, which does not have KNOX on it).
Click to expand...
Click to collapse
I have just read your topic title again, im sorry but i have no knowledge of knox since the i9300 does not have it, please get a mod to move this to the i9305 section where they can help you
Could you uninstall KNOX rather than going back to 4.1.2? http://www.androidpit.com/how-to-uninstall-knox

[Q] settings have stopped?

hi all its been a while since ive been on the boards because ive been running rooted stock deodexed rom. i havent flashed in a year or so but just recently my settings have stopped.
i continually have been getting this message instantly after ancelling out the message. i cannot get past the select language option. theres no escape.
I couldn't even backup my current rom. so i did a battery pull and rebooted into recovery to flash different roms. I've tried dn3 which was the last rom i had saved to my sd card, and miui7. both yielded the same results of the same message about the settings has stopped. its obvious something has went bad over time. i have done nothing but use it as a phone. no flashing or anything. is there something i need to flash in order to troubleshoot this issue? i do not have the money to obtain a replacement through assurion. also my recovery wouldnt let me restore my 1 backup on my sd card. so is there anything i can do from scratch? any settings zips to flash? Odin? ive searched boards and nothing specific to my device (I605). please help
iflip said:
hi all its been a while since ive been on the boards because ive been running rooted stock deodexed rom. i havent flashed in a year or so but just recently my settings have stopped.
i continually have been getting this message instantly after ancelling out the message. i cannot get past the select language option. theres no escape.
I couldn't even backup my current rom. so i did a battery pull and rebooted into recovery to flash different roms. I've tried dn3 which was the last rom i had saved to my sd card, and miui7. both yielded the same results of the same message about the settings has stopped. its obvious something has went bad over time. i have done nothing but use it as a phone. no flashing or anything. is there something i need to flash in order to troubleshoot this issue? i do not have the money to obtain a replacement through assurion. also my recovery wouldnt let me restore my 1 backup on my sd card. so is there anything i can do from scratch? any settings zips to flash? Odin? ive searched boards and nothing specific to my device (I605). please help
Click to expand...
Click to collapse
I'm assuming you are still on the 4.1.2 bootloader, since you were able to flash miui7 and dn3.
If something has gotten corrupted, you could try Odin'ing the stock recovery back onto the device by following the directions on this thread: http://forum.xda-developers.com/showthread.php?p=53624921
After getting the stock recovery on the device, do a factory reset and wipe cache in the stock recovery. Then you can use ODIN to reinstall CWM/Philz or TWRP (whichever recovery you were using previously). Hopefully you have an old backup you could restore... or you can set up your ROM again from the start after rebooting back into the system.
If worse comes to worst and wiping in the Stock recovery doesn't fix things...sounds like you may have to Odin back to stock 4.1.2, and then reroot with CASUAL and start over again. Droidstyle put together a good guide on how to restore the phone back to stock 4.1.2... you can find his guide here: http://forum.xda-developers.com/showthread.php?p=34891181. I think the 4.1.2 firmware link is down, but you can grab it from Sammobile.com.
You probably know... but don't flash the official Stock 4.3 or 4.4.2 Firmware onto the phone because there's no current bootloader unlock methods for those..... 4.1.2 is the last Android version for our I605's that has a "do it yourself" bootloader unlock method.

Need help please, rooted, soft bricked, and now.. no idea what this state is called.

So the first thing was I rooted a Samsung S4 SGH-M919.
I used Chainfire's files and Odin. it worked just fine.
Gave the phone to my wife but the firmware 4.4.2 was clearly outdated that none of the apps she played worked, everything just froze on her or crashed.
So I decided to install a custom rom, this led me to Imperium Lollipop 5.0.1
Well that in turn made the phone unbootable. It would continuously go into these 4 circular swirling balls and get stuck there. I cant even get into Recovery Mode. Only Download Mode.
So this made me do some searching and I dl'ed SGH-M919 stock firmware 4.2.2
I used Odin to flash that and it failed.
So now the phone boots into a screen that telling me to uses Kies to fix the issue.
I'm at a loss what to do next.
Can someone give me the necessary steps to fix the phone and where I intended to go with this?
Much appreciated. thanks.
catheapp said:
So the first thing was I rooted a Samsung S4 SGH-M919.
I used Chainfire's files and Odin. it worked just fine.
Gave the phone to my wife but the firmware 4.4.2 was clearly outdated that none of the apps she played worked, everything just froze on her or crashed.
So I decided to install a custom rom, this led me to Imperium Lollipop 5.0.1
Well that in turn made the phone unbootable. It would continuously go into these 4 circular swirling balls and get stuck there. I cant even get into Recovery Mode. Only Download Mode.
So this made me do some searching and I dl'ed SGH-M919 stock firmware 4.2.2
I used Odin to flash that and it failed.
So now the phone boots into a screen that telling me to uses Kies to fix the issue.
I'm at a loss what to do next.
Can someone give me the necessary steps to fix the phone and where I intended to go with this?
Much appreciated. thanks.
Click to expand...
Click to collapse
Are you sure that you have the right bootloader installed for the lollipop rom? Did you factory reset before installing custom rom? Try to wipe davlik after installation completes before restarting device. Also follow the instructions given by the rom thread op.

S3 wont boot and not registered on network !

Hey,
My friend was running a flawless custom rom on his s3. Suddenly, it turns off by itself and the phone is then stuck on boot logo.
1. I tried to factory reset with no luck.
2. I tried to install stock 4.3 with no luck.
3. I tried to install 4.1.2. The phone booted but with no recovery. Then i noticed that imei changed to *0049 and i'm not registered on network (even though it was working well on the custom rom).
4. I tried to upgrade to 4.3, i got succeeded but recovery didnt install.
5. I tried to install the custom rom again but no luck.
6. I tried all patches of modems and kernels and ariza. All Failed.
7. I also tried EFS backup/restore and Failed.
My only concern is to know what made this issue appear all by itself ?? Because i guess we should take it to a mobile repair shop.
One last thing to say is that every time i try to install a software, available space gets low, and even if i delete some files from internal storage the storage wont free up.
Thank you !
get stock 4.3 fom and flash it via Odin (wipe everything before flash). Then flash recovery via odin. then backup efs. then flash custom roms.
downgrade from 4.3 to 4.1.x causes efs to become corrupted
Seems like a corrupt nand. Was it rooted previously when it died the first time?.
Going from 4.3 to 4.1.2 will cause the imei to be lost as the efs encryption changed at 4.3. You cannot go back.
If the phone has a custom rom on it try an official cwm recovery, if not or it doesn't work then proceed to the following:
If you can get the phone into download mode try flashing the stock firmware twice or thrice with a factory reset in between each flash. Do not allow the phone to boot into the os!!. If it attempts to boot to OS after the blue pass in odin then pull the battery out immediately and boot to recovery or download mode respective of what you are doing at the time, resetting or flashing.
If that fails you can then call it a dead phone.
Beamed in by telepathy.
Wow these are new solutions to me..
I really thank you guys and i'll look forward into trying them in any upcoming problems.
Thank you so much for sharing your knowledge
And just to mention, yes the phone was rooted when it went bricked suddenly.
I'd try to flash an official cwm and if it takes then flash back to stock twice with a reset, reroot and leave it as that. Custom roms aren't worth the paper they're written on.
In addition to downgrading from 4.3 to an earlier version, but forgot at the time of writing, you can downgrade but you need an efs backup from the time it was at 4.1.2, which has to be restored but I'm not sure of the process. I couldn't tell you if it has to be restored before flashing, after or both.
Not a lot of people have an efs backup from 4.1.2. I do, but then my phone hasn't acted wierd yet. Sods law.
Kies 2 (not kies 3) can restore the phone but only if it was in original condition. You can try the emergency recovery routine but don't hold your breath.
Beamed in by telepathy.
You're right.. Efs is the only part most of us miss !!
I wrote all of the steps you said in order.. So that if any problem occur ill deal with it based on your info.
Btw do you suggest using KK TW 4.4.4 by back-to-n00t ? Or this wont be considered as a kind of official firmware ?

Categories

Resources