If the qualdcom processor on the EVO is ment to support LTE which in turn uses a sim card shouldn't that make the phone a world phone I know it is suppose to have an embeded sim. But my true question is will we be able to reporgram the sim once we get root or will write have to go with more of a hardware mod if we wish to make it a world phone.
Tactic13 said:
If the qualdcom processor on the EVO is ment to support LTE which in turn uses a sim card shouldn't that make the phone a world phone I know it is suppose to have an embeded sim. But my true question is will we be able to reporgram the sim once we get root or will write have to go with more of a hardware mod if we wish to make it a world phone.
Click to expand...
Click to collapse
Sprint uses embedded LTE technology to my knowledge, so its not like on Verizon where there is an LTE sim card. Also, this phone is a CDMA phone, and therefore does not have a regular sim card slot (Like phones on ATT or TMo). No software modifications will change this, and I highly doubt that anyone could even attempt to make a hardware modification to make this phone a world phone. Also, and LTE sim card is not the same as a regular sim card, as they perform different actions (access to LTE and the rest of the network is seperate).
Yeah I was thinking that it does not have the slot the thing is that the processor does support gsm also I was kinda hopeing it was like the rezound it is cdma phone on Verizon. It was found out that just by removing verizons LTE sim card and adding a gsm one it allowed the phone to work as a gsm phone.
the evo lte does not have the GSM and HSPA+ radios to be a world phone
When I preordered, the rep told me it was a world phone. I didn't think she was right but I didn't say anything.
Yeah i read the same post on Engadget i think. What a bummer was hopping it was since it is rocking the same processor that the at&t one (correct me if im wrong). Plus like i also stated was hopping it was like the HTC rezound on Verizon that with a experiment it ended up working. O well .... still kinda wanna take it apart and try wouldn't be xda without some experimenting or moding.
My friend has a Droid bionic which wasn't supposed to have GSM support, but it did through some hacks on rootzwiki and using a T-Mobile sim card. I think that the s4 includes a GSM radio, so its probably possible at least if the sim card can be accessed. Lte is GSM based so it is likely that GSM support is there if software is modified like it was on the bionic.
Sent from my GT-P7510 using Tapatalk 2
mlin said:
When I preordered, the rep told me it was a world phone. I didn't think she was right but I didn't say anything.
Click to expand...
Click to collapse
Sure, you can use it anywhere in the world that has a compatible CDMA network.
Many identify world phone with GSM radios (which the Evo 4G LTE does not have), but CDMA (which it does have) does work well for roaming in Asia.
I've roamed with my Evo 4G across Japan, Korea, and China for both voice and data. There's a full list of countries with CDMA roaming on the Sprint website. As soon as you arrive in country (if roaming works), you receive a free text with the rates and instructions on how to make international calls.
I have a AT&T branded M8 that I use on Tmobile because it is sim unlocked. My question is, do I flash custom roms from the Tmobile xda board or do I stick with AT&T roms only? I've never use a nonbranded phone! Thank you.
Its a tricky question, actually. In general any ROM meant for the GSM M8 should be "safe" to flash, in that they won't damage your phone and will work for the most part (but stay away from the CDMA ROMs for Verizon and Sprint). But some ROMs might work better on your specific (T-Mobile) network. Also, a different radio may or may not affect reception. The most you can really do is to read up or ask other T-Mobile users (or even T-Mobile customers using the AT&T version M8 like you) what has resulted from trial and error; or experiment yourself.
I have an old M8 lying around that I fired up and had remembered I had rooted it and the bootloader is unlocked.. Is there a way to 'trick' this phone into thinking it's an AT&T branded phone? hboot, etc. and that will allow me to RUU something official from AT&T? I know this sounds really strange and probably stupid but.. I just can't sleep and need something to fill the time.. Can I do it?
Don't think so, radio hardware is different, not to mention the partition layout.
Sent from my HTC6525LVW using Tapatalk
jbarcus81 said:
Is there a way to 'trick' this phone into thinking it's an AT&T branded phone? hboot, etc. and that will allow me to RUU something official from AT&T? ?
Click to expand...
Click to collapse
Absolutely not. At least not any way that is known; and your chance of failure is high (with a brick being the possible or even probable result).
As mentioned in the previous comment, the partitioning on the phones is different. If you try to run the RUU, you at best it will fail, at worst it will brick the device.
Most other M8 versions (that don't support CDMA) can be "converted" from one version to another (other exceptions being dual SIM and M8 Eye). But Verizon and Sprint are the oddballs here. Some experienced devs have been messing around with these variants from the start (to try to convert them) with no success.
Perfect! All I needed to hear! Ah well.. it was worth a shot! Just trying to get my account provisioned for LTE so I can get LTE on my unlocked devices.. I've been told, and read, that if I can get an AT&T branded LTE capable phone to just swap my SIM in it.. and let my account provision, then I'll have LTE on any device AT&T or not... Just trying to avoid a contract..
jbarcus81 said:
I've been told, and read, that if I can get an AT&T branded LTE capable phone to just swap my SIM in it.. and let my account provision, then I'll have LTE on any device AT&T or not... Just trying to avoid a contract..
Click to expand...
Click to collapse
As long as the phone is SIM unlocked (Verizon version is) then you should just be able to put an AT&T SIM in, and enter the proper AT&T APN for service, as long as the phone supports the proper bands. Its irrelevant whether the phone is AT&T branded or not.
Now the underlined bit in the paragraph above is the main issue. The Verizon M8 only supports one of the four bands (Bands 2, 5, 4, and 17) used by AT&T for LTE (Verizon M8 supports Bands 3, 4, 7, and 13). So depending on what band is used in your area, you may or may not get LTE.
But GSM (2G) and HSPA (3G) should work just fine on AT&T.
redpoint73 said:
As long as the phone is SIM unlocked (Verizon version is) then you should just be able to put an AT&T SIM in, and enter the proper AT&T APN for service, as long as the phone supports the proper bands. Its irrelevant whether the phone is AT&T branded or not.
Now the underlined bit in the paragraph above is the main issue. The Verizon M8 only supports one of the four bands (Bands 2, 5, 4, and 17) used by AT&T for LTE (Verizon M8 supports Bands 3, 4, 7, and 13). So depending on what band is used in your area, you may or may not get LTE.
But GSM (2G) and HSPA (3G) should work just fine on AT&T.
Click to expand...
Click to collapse
That's the odd part.. My main phone is the S6 Edge from Verizon.. it's on the AT&T network and I assume my APN is correct.. But it's not picking up LTE and I am almost certain the S6 Edge from Verizon will pick up the correct band for AT&T LTE .. But it's only using the H+ speed.. What's even more strange?? When I throw my SIM into the M8? I get LTE on AT&T and verify with 30+mpbs speeds.. I have no idea what's going on...
jbarcus81 said:
That's the odd part.. My main phone is the S6 Edge from Verizon.. it's on the AT&T network and I assume my APN is correct.. But it's not picking up LTE and I am almost certain the S6 Edge from Verizon will pick up the correct band for AT&T LTE .. But it's only using the H+ speed.. What's even more strange?? When I throw my SIM into the M8? I get LTE on AT&T and verify with 30+mpbs speeds.. I have no idea what's going on...
Click to expand...
Click to collapse
Yeah, that is strange. According to the specs for the S6 Edge here, the Verizon version supports the same LTE bands as the VZN M8, and actually some additional bands (2 and 5) that also happen to be bands used by AT&T.
One thing I can think of, is that the VZN M8 in actuality supports some bands that are not advertised/explicit in the specs. It wouldn't be unheard of, as members here have reported some versions of the non-CDMA M8 as supporting some bands not indicated in the specs. And that band happens to be what AT&T is using in your market region. In this case, that band would seem to be Band 17 (the only band that AT&T is known to use, that isn't listed on the S6 Edge specs).
Or the other possibility, is there is just some issue with the S6 that is preventing connection to LTE (but on the same supported band that the M8 has).
redpoint73 said:
Yeah, that is strange. According to the specs for the S6 Edge here, the Verizon version supports the same LTE bands as the VZN M8, and actually some additional bands (2 and 5) that also happen to be bands used by AT&T.
One thing I can think of, is that the VZN M8 in actuality supports some bands that are not advertised/explicit in the specs. It wouldn't be unheard of, as members here have reported some versions of the non-CDMA M8 as supporting some bands not indicated in the specs. And that band happens to be what AT&T is using in your market region. In this case, that band would seem to be Band 17 (the only band that AT&T is known to use, that isn't listed on the S6 Edge specs).
Or the other possibility, is there is just some issue with the S6 that is preventing connection to LTE (but on the same supported band that the M8 has).
Click to expand...
Click to collapse
Yeah.. I'm not worried about it.. I've been told that all I need is an AT&T branded LTE capable device hooked up to the account and that my account hasn't been provisioned for LTE .. I've seen this in a few places so it's worth a shot.. I ordered a junk LTE phone branded AT&T to test it out.. ordered a OnePlus 2 and will likely unload the S6 Edge (if it never picks up the LTE from AT&T)
jbarcus81 said:
I've been told that all I need is an AT&T branded LTE capable device hooked up to the account and that my account hasn't been provisioned for LTE ..)
Click to expand...
Click to collapse
As I've already mentioned, its not really necessary to have an AT&T branded device. I suspect the reason you've seen people say this, is that AT&T branding means by definition the phone has all the bands used by AT&T for LTE; since obviously the phone is intended for use on AT&T's network. Since AT&T uses a number of bands (4) and LTE bands being used worldwide has become very un-standardized, its somewhat difficult to find a non-AT&T phone that has all the bands. But they do exist, such as the US unlocked M8, Dev Edition M8, and Nexus devices. Also, I've seen folks used other non-ATT branded phones, which may not have all 4 LTE bands used by AT&T, but the one(s) needed in the particular user's region. Not ideal, but sufficient for some folks.
Another reason why some may say the phone needs to be AT&T branded, is that AT&T tech support won't provide you any support if you have a non-ATT phone. But honestly, I've used non-branded devices (and plenty of folks here have), and this is very rarely an issue. The folks here on XDA will usually provide you better support, anyway!
Of course, your ATT account needs to be provisioned for LTE in order to have that service. Its a simple matter, and doesn't cost anything (just need a smartphone data plan).
redpoint73 said:
As I've already mentioned, its not really necessary to have an AT&T branded device. I suspect the reason you've seen people say this, is that AT&T branding means by definition the phone has all the bands used by AT&T for LTE; since obviously the phone is intended for use on AT&T's network. Since AT&T uses a number of bands (4) and LTE bands being used worldwide has become very un-standardized, its somewhat difficult to find a non-AT&T phone that has all the bands. But they do exist, such as the US unlocked M8, Dev Edition M8, and Nexus devices. Also, I've seen folks used other non-ATT branded phones, which may not have all 4 LTE bands used by AT&T, but the one(s) needed in the particular user's region. Not ideal, but sufficient for some folks.
Another reason why some may say the phone needs to be AT&T branded, is that AT&T tech support won't provide you any support if you have a non-ATT phone. But honestly, I've used non-branded devices (and plenty of folks here have), and this is very rarely an issue. The folks here on XDA will usually provide you better support, anyway!
Of course, your ATT account needs to be provisioned for LTE in order to have that service. Its a simple matter, and doesn't cost anything (just need a smartphone data plan).
Click to expand...
Click to collapse
I've dug deeper and have to not only have an AT&T branded phone, I have to register the IEMI on my account, then swap the SIM card back into the other phone. I've got the phone but can't find a way to do this online so I'll have to call tomorrow...
Sent from my ONE A2005 using Tapatalk
I have a m8 whl sprint abd does not use CDMA only gsm network. I can I change the mid and convert the phone to get latest ota for dev edition version? I thanks
long.nguyen said:
I have a m8 whl sprint abd does not use CDMA only gsm network. I can I change the mid and convert the phone to get latest ota for dev edition version? I thanks
Click to expand...
Click to collapse
Absolutely NO.
What I mentioned above (Post #3) for the Verizon variant, also applies to Sprint (both versions support CDMA - the fact you don't use it is irrelevant). If you try to convert to another version won't work, and will probably result in a brick.
Also, even if you didn't have a CDMA version M8, you typically can't convert using an OTA, it has to be an RUU.
redpoint73 said:
Absolutely NO.
What I mentioned above (Post #3) for the Verizon variant, also applies to Sprint (both versions support CDMA - the fact you don't use it is irrelevant). If you try to convert to another version won't work, and will probably result in a brick.
Also, even if you didn't have a CDMA version M8, you typically can't convert using an OTA, it has to be an RUU.
Click to expand...
Click to collapse
@redpoint ; don't we have any chance to install different provider radios to Verizon Htc devices..?
because verizon devices you know that support 3, 4, 7, and 13 bands,but i want to enable band 20 for europe LTE..
pls help us to enable other bands =( because only u can do that as a genius =)
thanx a lot
cincon said:
@redpoint ; don't we have any chance to install different provider radios to Verizon Htc devices..?
Click to expand...
Click to collapse
Absolutely NOT. As already thoroughly discussed on this thread, if you attempt to install another version's radio on the Verizon version, it won't work, and you may radio brick the phone (permanent damage possible).
Different radios, different partition layout.
Don't even try it. Experienced devs have tried to "convert" by various methods and mods, and failed.
But there may be other ways (besides flashing another version's radio) to enable the band(s) you want, read on:
cincon said:
[MENTION=434105]
because verizon devices you know that support 3, 4, 7, and 13 bands,but i want to enable band 20 for europe LTE..
Click to expand...
Click to collapse
You can take a look at the following method, as it claims to enable Band 20: http://forum.xda-developers.com/verizon-htc-one-m8/general/lte-band-7-2600mhz-finally-guide-t2992523
Read the thread, and proceed at your own discretion. I'm not knowledgeable with changing NV values (it doesn't work on "GSM" M8 variants, so does not apply to me). I simply know this thread exists.
cincon said:
[MENTION=434105]
pls help us to enable other bands =( because only u can do that as a genius =)
Click to expand...
Click to collapse
Far from a genius, and I don't create any of these mods. I just contribute by passing on knowledge I've gained here. Really, that is part of what XDA is all about.
I always used to think Sprint & Verizon were similar style carriers.. then AT&T & T-Mobile were as well.. so those were the respective carriers one another could be unlocked for..
Maybe that was never the case.. but now I find the whole unlocking thing confusing.. thought it used to be CDMA stays on CDMA .. GSM stays on GSM..
While I can't answer your question directly, I can give some info, You used to be correct, Carriers like Sprint and Verizon used to only put CDMA Radios/Chipsets in their phones. Then came what they called "world phones" I believe on Sprint, which was a CDMA device that also had a GSM radio/sim slot encase you traveled outside the US. As these got more popular, more manufacturers rather then build two separate devices, would build one and software lock the GSM radio as requested by Sprint (I am guessing). Hope this helps a bit.
My question remains, when carrier unlocking an s9 or s9+, is there any way to make it available on different network types like say if the phone started out using a carrier that uses CDMA, is their any way to flash it to utilize t-mobile's frequency bands?
I unlocked two galaxy s9+'s that were on xfinity, which uses verizon towers. The two phones did unlock, but only for carriers utilizing CDMA. I was hoping they would be able to be used on t-mobile after unlocking, but they can't. Only messaging and data works using a t-mobile SIM card. Verizon works fine. SO my question still remains, is there a way to make it work?
I used itekimei .com to have the phones unlocked, as I found they were suggested here on XDA. And they weren't really able to answer my question either. They said it should work with t-mobile, but the conversation ended with "t-mobile is having problems with unlocked phones." This is super frustrating trying to get an answer.
Edit: I found this forum https://forum.xda-developers.com/galaxy-s9-plus/help/sim-unlocking-sprint-samsung-galaxy-s9-t3783571 which debates whether it will work or not. Also this one specifically about Xfinity https://forum.xda-developers.com/galaxy-s9-plus/help/xfinity-mobile-unlock-service-t3796349. But mine didn't work. I don't think U.S. S9's are cross compatible from CDMA to GSM. I have been searching and searching and can't find a way.
Yes, the US unit hardware is cross compatible. Heck, Verizon itself isn't all CDMA. They are phasing out CDMA soon and most of their network is LTE.
I have a US unlocked S9+ and can use any carrier in the US. You could too, all you need to do is flash the US Unlocked firmware to the device using Odin.
Your problem may be the Xfinity firmware restricting certain bands is all. Or possibly the device isn't really unlocked.
Regards,