I downloaded the o'clock app but cannot set any of the great watchfaces to use or find any settings that lets its show one watch face per day or any other time. Is there a way yet?
syounger64 said:
I downloaded the o'clock app but cannot set any of the great watchfaces to use or find any settings that lets its show one watch face per day or any other time. Is there a way yet?
Click to expand...
Click to collapse
Seeing that there's at least 4 or 5 different x201 devices in this forum, knowing what one you have will help. Also knowing what app you are refering too allos help as there is the Omatefaces and Kurt's Watchfaces apps and maybe one other.
Ahh sorry. I have the Omate True Smart watch. It just arrived last week. I'm not sure what else to tell you. I'm referring to the o'clock app from the ostore.
Lokifish Marz said:
Seeing that there's at least 4 or 5 different x201 devices in this forum, knowing what one you have will help. Also knowing what app you are refering too allos help as there is the Omatefaces and Kurt's Watchfaces apps and maybe one other.
Click to expand...
Click to collapse
syounger64 said:
Ahh sorry. I have the Omate True Smart watch. It just arrived last week. I'm not sure what else to tell you. I'm referring to the o'clock app from the ostore.
Click to expand...
Click to collapse
When you first launch the app (v1.9.0) it gives you the following onscreen instructions;
Fling sideways to switch faces
Fling up and down to switch themes
Double tap to open options
In settings at the very bottom under "Premium options" is;
Switch face every 15secs
Lockscreen face
Have you patched you TS yet? If not, you may want to do that.
Ahh ok so the app wasn't working right. I remember seeing that when I first installed that oclock app but the double tap option stopped working. I resolved it by removing the app and installing it again. It's working now. THANKS.
Lokifish Marz said:
When you first launch the app (v1.9.0) it gives you the following onscreen instructions;
Fling sideways to switch faces
Fling up and down to switch themes
Double tap to open options
In settings at the very bottom under "Premium options" is;
Switch face every 15secs
Lockscreen face
Have you patched you TS yet? If not, you may want to do that.
Click to expand...
Click to collapse
syounger64 said:
Ahh ok so the app wasn't working right. I remember seeing that when I first installed that oclock app but the double tap option stopped working. I resolved it by removing the app and installing it again. It's working now. THANKS.
Click to expand...
Click to collapse
Reinstalling would have been the next step.
Did your root or patch your TS yet?
Lokifish Marz said:
Reinstalling would have been the next step.
Did your root or patch your TS yet?
Click to expand...
Click to collapse
Sorry for going of topic but...
You said "many different Omate" - I really hope MotherBoard is same on all and we could use same kernels.
It would be terrible if we have five or six different devices - I really doubt there will be development for all of them.
You, as a developer, could maintain two, maybe three devices simultaneously..
Sent from my C6903 using Tapatalk
funky0308 said:
Sorry for going of topic but...
You said "many different Omate" - I really hope MotherBoard is same on all and we could use same kernels.
It would be terrible if we have five or six different devices - I really doubt there will be development for all of them.
You, as a developer, could maintain two, maybe three devices simultaneously..
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
There's already four different boards that I know of. I only have access to one, soon to be two. That's part of the reason the ROM it taking so long to get out. The ROM base is the same but it's requiring at least two different kernels so far and the 1/8 EU 2100 has yet to come out yet.
Why so many different boards. With the exception of the 1900 and 2100 isnt the rest of the ts the same?
rhineymac said:
Why so many different boards. With the exception of the 1900 and 2100 isnt the rest of the ts the same?
Click to expand...
Click to collapse
PR early 512/4 2100
PR late 512/4 2100
512/4 EU 2100
1/8 1900
1/8 2100
And that's just what Omate has produced.
So everytime there is a new board produced it changes firmware? Or what does change? I'll Google it so you don't have to explain it to me boob here I'm mean noon :good:
rhineymac said:
So everytime there is a new board produced it changes firmware? Or what does change? I'll Google it so you don't have to explain it to me boob here I'm mean noon :good:
Click to expand...
Click to collapse
Not whole firmware, only kernel
But that's crapy too...
Sent from my C6903 using Tapatalk
Would it be possible to use the Premium features on Imperium Operative 1.1.0? Thanks in advance!
Bringing this back to oclock, I don't have the premium features on Imperium Operative. Any hope to get them without buying it? I'm not opposed to paying once but I kinda feel like I paid when I bought the watch.
Sent from my Nexus 7 using Tapatalk
It was addressed in another thread but as soon as Kurt updates the app it will have premium features enabled.
Lokifish Marz said:
It was addressed in another thread but as soon as Kurt updates the app it will have premium features enabled.
Click to expand...
Click to collapse
Hi my friend,
Why I get only version for this app 1.9.0 and I can not update it?
Why this app not working to me?
I have this version on my wotch: Imperium Operative v1.1.0 and my watch work well.
Thanks,
Arie.
lirona said:
Hi my friend,
Why I get only version for this app 1.9.0 and I can not update it?
Why this app not working to me?
I have this version on my wotch: Imperium Operative v1.1.0 and my watch work well.
Thanks,
Arie.
Click to expand...
Click to collapse
The current version of the app is v1.10.0 which can be found on the Play Store.
What do you mean the app does not work? Does it not launch? Does it lock up? What doesn't work?
I can not update it from the app and I don't see this app on Play Store.
It is not launch, How can I launch it and when I click on something like massages it is not working.
Thanks, and have a good day,
Arie.
Related
Hi everyone,
since I rooted my Ultra I tried to find something useful besides using Titanium Backup to restore all the apps I had on my S3...
I found out some time ago that the tablet Z has the "Tap to Wake" function, and began searching for a solution for the ultra: the app in the title seems to fit perfectly, as it doesn't require any special kernel or framework (it does need busybox installed, but hey, I'd have installed it anyway) for any of its functionalities to work.
BUT, I actually don't want to spend even 2 bucks for the app if it doesn't work.
As I read in the specific thread on XDA, support is a little bit lacking, and while starting the test app it says my Ultra is compatible, several reviews say they were supposed to have compatible devices but the app has never worked.
Anyone has already tried it? Or has any alternative?
Sent from my C6833 using Tapatalk 2
Its not compatible And you do know that you can refund an app wright ?
yamani.m said:
Its not compatible And you do know that you can refund an app wright ?
Click to expand...
Click to collapse
Yeah I do know that, but I also downloaded the test app, and it said it was compatible but not yet listed as so...
Guess I'll stay away and wait for a kernel that supports it...
Sent from my C6833 using Tapatalk 2
very good question
I'd love a tap to wake option.
I have been using Automaton for a day or two. I use a simple sunglasses sleeve(large-stretchy) while I wait for a slow boat case.
Automaton uses proximity sensors to give wake features like the S4. When I pull it from the case or pocket, instant on. I haven't figured out getting it to go straight to home screen. There is an option.
Also just setting it upside down on a flat surface will then put it to sleep.
I hope this helps.
http://forum.xda-developers.com/showthread.php?t=2297987
CCJ22 said:
I'd love a tap to wake option.
Click to expand...
Click to collapse
So I was wondering why the GPS take about 10 seconds to lock on to area sat's, and found that there is no region set for our Ultra. This is usually the case with international devices.. So this mod will enable you GPS hardware to skip the location lock which takes about 5 seconds, and then will find your region stat's.
Since applying this, I've noticed my GPS lock has cut down to a few seconds, where it used to take up to 10 seconds... sometimes even 20 seconds in my car.
Prerequisite:
You must know where you live!
Notes:
You may not see a faster result at first try. Your device may have to redownload the gps data. Ensure you have a data connection.
Instructions:
0 - Download and extract the zip folder (onto your Ultra)
1 - Find out which region you live in... then copy the region folder (Africa, Asia, Europe, North America, Oceania, South America)
2 - ... and paste the folder into the following directory: system/etc/
3 - Give the folder the following permissions:
Download:
LINK
If you've found this useful a simple "Thanks" will suffice :good:
I will report soon
ps000000 said:
I will report soon
Click to expand...
Click to collapse
yeah let me know if it works for Asia.
I just copied the satellite data off line, and pasted it into these folders for Android... so it should be fine. :fingers-crossed:
hamdogg said:
yeah let me know if it works for Asia.
I just copied the satellite data off line, and pasted it into these folders for Android... so it should be fine. :fingers-crossed:
Click to expand...
Click to collapse
oddly I was looking at this yesterday or the day before and already have an oceania folder in my dev stuff.
blueether said:
oddly I was looking at this yesterday or the day before and already have an oceania folder in my dev stuff.
Click to expand...
Click to collapse
Mine had Asia. Possibly why it was taking so long.
What I meant was I downloaded more or less the same mod the other day, just had not got around to applying it.
blueether said:
What I meant was I downloaded more or less the same mod the other day, just had not got around to applying it.
Click to expand...
Click to collapse
ah right. I thought of implement it into my ROM, but its region specific.. There's always something else to add... Found a 4 way reboot mod.. but it involves a lot of coding which I'm not really up on the play with.
This app does same thing but allows you to choose you location first - good for including onto roms https://play.google.com/store/apps/details?id=org.fastergps
Sent from my C6833 using Tapatalk
iBuzman said:
This app does same thing but allows you to choose you location first - good for including onto roms https://play.google.com/store/apps/details?id=org.fastergps
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
ah... well that would have been easier! lol..
cheers buz
iBuzman said:
This app does same thing but allows you to choose you location first - good for including onto roms https://play.google.com/store/apps/details?id=org.fastergps
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
nice that it's OS as well, EDIT oh same dev as AdAway as well
This works better for me https://play.google.com/store/apps/details?id=ro.pca.bettergps
This is nice
dadme said:
This works better for me https://play.google.com/store/apps/details?id=ro.pca.bettergps
Click to expand...
Click to collapse
Really? From the reviews & the screenshots it appears to be a rip of Faster GPS, (and making money from Ad revenue.)
---------- Post added at 04:18 PM ---------- Previous post was at 04:09 PM ----------
hamdogg said:
So I was wondering why the GPS take about 10 seconds to lock on to area sat's, and found that there is no region set for our Ultra. This is usually the case with international devices.. So this mod will enable you GPS hardware to skip the location lock which takes about 5 seconds, and then will find your region stat's....
...If you've found this useful a simple "Thanks" will suffice :good:
Click to expand...
Click to collapse
Yes, I know what the last line says.
Thank you for the heads up, I have a C6806, and my GPS lock is rapid without this app,
However, I travel to the UK to visit family on occasion and the last time I did so, I failed to get a lock with my NA Samsung Galaxy Note (SGH-i717), so this app should be useful the next time that I'm over there by letting me switch my GPS region set to one more compatible with that location.
I'm having trouble getting the WatchOn app to work. Any suggestions would be appreciated. Thanks
Seems like it works randomly. My OTS would turn on out of no where but never from the actions I defined.
I think this may have something to do with the sensors not working properly right now.
menichol said:
I'm having trouble getting the WatchOn app to work. Any suggestions would be appreciated. Thanks
Click to expand...
Click to collapse
I liked the style of the app and the config page made me feel it would turn on when I wanted it, but the screen never ever ever never turned on once using it.
I tried a Screen Shake On app from play store, but it would only work for about two minutes after the screen went dark. Now I just push the power button, but am keeping my eye out for a good app to get this function.
jd
Interestingly I've noticed that the app works great...as long as i'm connected to an external power supply. If i disconnect it...you know, to wear it or something...then it doesn't work.
pnewb said:
Interestingly I've noticed that the app works great...as long as i'm connected to an external power supply. If i disconnect it...you know, to wear it or something...then it doesn't work.
Click to expand...
Click to collapse
There are known issues with the sensors on this device. Not much to be done about it until kernel source gets released.
mortis2600 said:
There are known issues with the sensors on this device. Not much to be done about it until kernel source gets released.
Click to expand...
Click to collapse
Am I correct in thinking it is theoretically possible that an official firmware that fixes the problem could be released without the kernel source being released? (Trying to understand where the problem has to be fixed, as a matter of interest.)
pnewb said:
Interestingly I've noticed that the app works great...as long as i'm connected to an external power supply. If i disconnect it...you know, to wear it or something...then it doesn't work.
Click to expand...
Click to collapse
Is this related to why the calibration screen appears to be perfectly consistent and it looks like the sensors are fine, but then once the screen has gone to sleep, it will wake up again for movements and orientations that seem to bear no resemblance to how it was set?
At one point I was halfway convinced that it was consistently waking up when I had the watch rotated to about 30 degrees closer to vertical and 45 degrees counterclockwise (using the face as the clock) from the settings I'd given it, but then I concluded I must have been inexplicably inebriated when I determined that.
kilroo said:
Am I correct in thinking it is theoretically possible that an official firmware that fixes the problem could be released without the kernel source being released? (Trying to understand where the problem has to be fixed, as a matter of interest.)
Is this related to why the calibration screen appears to be perfectly consistent and it looks like the sensors are fine, but then once the screen has gone to sleep, it will wake up again for movements and orientations that seem to bear no resemblance to how it was set?
At one point I was halfway convinced that it was consistently waking up when I had the watch rotated to about 30 degrees closer to vertical and 45 degrees counterclockwise (using the face as the clock) from the settings I'd given it, but then I concluded I must have been inexplicably inebriated when I determined that.
Click to expand...
Click to collapse
I don't have any app of this type loaded at the moment. Sometimes I still catch the screen on. So, don't assume every time you see it lit up it's because of the WatchOn app. This thing is just 7 kinds of silly and does what it wants.
kilroo said:
Am I correct in thinking it is theoretically possible that an official firmware that fixes the problem could be released without the kernel source being released? (Trying to understand where the problem has to be fixed, as a matter of interest.)
Click to expand...
Click to collapse
They still have not fixed the security and root issues I told them about in November. Mainly because they lack the skills. The only reason the sensors and app work on the EU 512/4 is because I fixed it by pulling the kernel from another x201.
Lokifish Marz said:
They still have not fixed the security and root issues I told them about in November. Mainly because they lack the skills. The only reason the sensors and app work on the EU 512/4 is because I fixed it by pulling the kernel from another x201.
Click to expand...
Click to collapse
I gather that means yes, theoretically, but it's far less likely.
I've installed https://play.google.com/store/apps/details?id=com.adl.appshakerShake and it seems to work pretty consistently (although the balance I have found for being able to activate it when I want without it activating because I scratched my nose or something is at a sensitivity of 9, which roughly translates to "vigorously rotate my wrist back and forth for about a second."
I just remembered I haven't reinstalled E-Robot since my last flash and I never got around to trying to use it to create a "turn the screen on when the watch shakes a lot" action; I may try that soon.
Shake is one of the very few that do work. I haven't tested them all but may include it in the next release as well as remote camera control for those that are doing the BT companion workaround.
Shake
kilroo said:
I gather that means yes, theoretically, but it's far less likely.
I've installed Shake and it seems to work pretty consistently (although the balance I have found for being able to activate it when I want without it activating because I scratched my nose or something is at a sensitivity of 9, which roughly translates to "vigorously rotate my wrist back and forth for about a second."
I just remembered I haven't reinstalled E-Robot since my last flash and I never got around to trying to use it to create a "turn the screen on when the watch shakes a lot" action; I may try that soon.
Click to expand...
Click to collapse
I've been trying to get this app to work with 0 luck. 1/8 1900, ensec + operative root on my TS. Can you post the specific settings you are using so I can copy them exactly and see if I can get it to work?
bradgevo said:
I've been trying to get this app to work with 0 luck. 1/8 1900, ensec + operative root on my TS. Can you post the specific settings you are using so I can copy them exactly and see if I can get it to work?
Click to expand...
Click to collapse
Action when shaken: Simple - Turn Screen On
Sensitivity: 8 is working well for me, I recommend trying a little higher while you're attempting to get it to work...8 is a pretty vigorous back-and-forth rotation of the wrist for me.
Service State: On
Start at Phone Startup: checked
Active when screen is off: checked
Battery saving mode: unchecked
Vibrate when shaken: checked
Notify when shaken: checked (I think Turn Screen On is one of the actions for which this doesn't do anything)
Most shake or position based wake apps do not work on the 1/8 1900. Even Shake is inconsistent and it's the best so far.
Lokifish Marz said:
Shake is one of the very few that do work. I haven't tested them all but may include it in the next release as well as remote camera control for those that are doing the BT companion workaround.
Click to expand...
Click to collapse
Which is the BT companion workaround?
Shake works fine here too...
Can anyone have a working apk file for watchON app ? because it's not found on the Ostore
elsabea said:
Can anyone have a working apk file for watchON app ? because it's not found on the Ostore
Click to expand...
Click to collapse
I have it but it'll not work.
It'll only work if you have 1900 512 TS
Sent from my C6903 using Tapatalk
Hi can anybody send me the apk.
I have the EU 512mb edition.
qweqwe21 said:
Hi can anybody send me the apk.
I have the EU 512mb edition.
Click to expand...
Click to collapse
Here it is mate
OwatchON
Sent from my C6903 using Tapatalk
funky0308 said:
Here it is mate
OwatchON
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Thank you very much
Apparently AW 5.1.1 is already rolling out for the Asus Zenwatch.
http://9to5google.com/2015/05/14/zenwatch-android-wear-5-1-1/
Anyone received it yet for our LG G Watches?
Just now I checked.
No update yet.
Hope we will get it soon.
waiting too...
Been checking every day for the past the weeks... come on lg !!
nicolahaye said:
Been checking every day for the past the weeks... come on lg !!
Click to expand...
Click to collapse
It's Google who role it out isn't it, not LG?
Sent from my SM-G920F using XDA Premium 4 mobile app
Hawke84 said:
It's Google who role it out isn't it, not LG?
Sent from my SM-G920F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have no idea actually
Hawke84 said:
It's Google who role it out isn't it, not LG?
Sent from my SM-G920F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
its lg not google. its like the google edition phone. google only roll out update for their own devices like nexus.
Can't wait
xuanphucn said:
its lg not google. its like the google edition phone. google only roll out update for their own devices like nexus.
Click to expand...
Click to collapse
Nope, the Android Wear updates are coming directly from google. All Android Wear watches are like nexus devices.
Yes they are all updated from Google servers, but Google are fairly random with all their updates, the order they do them in never makes any sense to anyone, least of all them.
Here is how the update rollouts work. This applies to Nexus updates, Google app updates, and Android Wear updates. http://www.reddit.com/r/Android/comments/1r1dz4/44_kitkat_has_started_rolling_out_on_the_n4/cdiwt6f
It is, mostly.
Rollouts are conducted in phases. Typically they start at 1% of devices for around 24 - 48 hours; we watch the return rates and resulting device checkins and error reports (if any), and make sure nothing looks wrong before sending it to more. Then typically it goes to 25%, 50%, 100% over the course of a week or two.
What the percentages mean is that when your device checks in, it has a 1% chance (for example) of being offered the OTA. If it doesn't (randomly) get an offer, it will never get an offer until the next batch.
IOW, once your device checks in and gets turned down, that's it until the next batch. Mashing on the "check for updates" button just causes your device to check in again, and get automatically turned down again. Think about how that makes your device feel! WON'T SOMEONE PLEASE THINK OF THE PHONES?!
That said, once the new batch does start, hitting that button does give you a new roll of the dice -- but once. Since devices usually only check in for system updates every 24 hours (I think? Certainly on a many-hours basis) this can get you your shot sooner than it would happen on its own.
So, mash away. Just be patient, and mashing on it more often than once or twice a day isn't going to gain you anything.
Edit: also, keep in mind that this isn't first-come/first-served. You're not racing other devices to get your slot in the current batch, or something.
Click to expand...
Click to collapse
BPinard said:
Here is how the update rollouts work. This applies to Nexus updates, Google app updates, and Android Wear updates. http://www.reddit.com/r/Android/comments/1r1dz4/44_kitkat_has_started_rolling_out_on_the_n4/cdiwt6f
Click to expand...
Click to collapse
Yes, but what I meant is the order that devices get it, not individual units.
Looks like it may be rolling out today.
https://productforums.google.com/forum/#!topic/android-wear/Dm-_S6xxtS4
Just to keep you informed. I have a coworker that has an lg watch and he just updated to 5.1.1 a few minutes ago.
serge_harle_z said:
Just to keep you informed. I have a coworker that has an lg watch and he just updated to 5.1.1 a few minutes ago.
Click to expand...
Click to collapse
i got it guys. woohoo
Here is a pic of his watch.
xuanphucn said:
i got it guys. woohoo
Click to expand...
Click to collapse
serge_harle_z said:
Here is a pic of his watch.
Click to expand...
Click to collapse
im updating mine
It seems to push notifications to the watch quicker (before it would always lag a second or two) and there seems to be a lot more options, like having a flashlight, the ability to change font sizes, etc.
Has any one grabbed the OTA?
Man I can't wait ! Still haven't got ota how do gestures work ?
Today I updated my Stratos to 2 3.8. the top and bottom button stop working. Don't scroll ..
Any one some problems ?
Sent from my ONEPLUS A3003 using Tapatalk
hugonv said:
Today I updated my Stratos to 2 3.8. the top and bottom button stop working. Don't scroll ..
Any one some problems ?
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
it's not a bug, it's a new "feature" from Huami.
Check for my thread and see if you match the requirements in order to fix it.
hugonv said:
Today I updated my Stratos to 2 3.8. the top and bottom button stop working. Don't scroll ..
Any one some problems ?
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=78686911&postcount=3
same here, was on official not modified fw before this one. now the upper and lower buttons do nothing as they did... The upper one sends me to the last item on the list, while the lower one does really nothing at all..
I wish I have not updated...
Fevves said:
same here, was on official not modified fw before this one. now the upper and lower buttons do nothing as they did... The upper one sends me to the last item on the list, while the lower one does really nothing at all..
I wish I have not updated...
Click to expand...
Click to collapse
You can skip update for a while and eventually will bother you so much, that you will just update to get rid of it. Yeah, I hate aggressive update policy.
Zeljko1234 said:
You can skip update for a while and eventually will bother you so much, that you will just update to get rid of it. Yeah, I hate aggressive update policy.
Click to expand...
Click to collapse
Well, with @Saratoga79 guidance all is (almost) back to normal. few clicks are different but hey, the old bitton layout and functionality is still there. Much appreciated such quick resolution and utmost appreciated commitment by @Saratoga79. As for wherethis one is going... it almost seem they built this ver for Pace and not for Stratos...
Btw, my watch seems faster and snappier now... not a placebo as far as I can tell.
Don't kill me, but so far I like new buttons mapping
I reported this new "feature" as a bug. I unable to control watches :/
peca_007 said:
I reported this new "feature" as a bug. I unable to control watches :/
Click to expand...
Click to collapse
the same here....cant navigate from options with this new mapping
Hi where can i find the thread / fix for this?