Related
Hey All,
I am trying to install the OTA for ICS that was released by Rogers today for my EVO 3D.
I am rooted and unlocked but with the stock Rogers ROM and I also have S-OFF.
The problem I am running into is that I am able to download the upgrade but when I go into HBoot and try to apply it I get a signature verification failed.
Originally I thought it might have been a bad download so I downloaded it a 2nd time, same result.
So I thought, what the hell, I will turn off the signature check and try it again. This time I get an error that the 'assert failed: check_cid(getprop("ro.cid").' and the installation aborted.
Does anyone have any insight into why this would fail? I am hoping to apply this but not sure why its a no go.
Thanks for the help in advance.
Cheers, Crash
Have you ever changed your cid? run "fastboot getvar cid" and post what it says. If your cid is original for rogers, the ota may not be working because you are s-off.
Hey @patrick92260
I have not checked my CID, not really sure how actually.
In order for me to run that command I would have to be hooked up to ADB I assume? If so thats going to need to wait until I get home tonight to try that and give you the results, unless there is another way I can run that command?
Thx for the reply
Yeah it's done through ADB. If you don't really know what the cid is, you probably haven't changed it. If you have the stock recovery, then the reason the ota isn't working has to be because you are s-off. you will probably have to wait for an RUU to upgrade to ICS.
Makes sense then. Would setting S-ON make it so I can apply it? Or would that not be worth the effort?
Honestly I can wait a bit longer, we have been waiting this long for it
Thx for the help.
But you should be able to get back to S-ON by flashing Gingerbread RUU, no?
If you originally used revolutionary to get s-off, then you have radio s-off which is the highest level of s-off you can have and i would not recommend trying to set it back to s-on. i also have a rogers evo 3d and i am using the asian RUU ICS and it works fine while letting me keep s-off after flashing it so i would recommend using that RUU if you want ICS.
---------- Post added at 01:10 PM ---------- Previous post was at 01:07 PM ----------
SaHiLzZ said:
But you should be able to get back to S-ON by flashing Gingerbread RUU, no?
Click to expand...
Click to collapse
If he has radio s-off you can flash any RUU you want and it will not turn it back to s-on. Radio s-off is basically permanent since it removes the data in the S58 section of the phone. The fake s-off is the one you need to be careful with which is usually done by using a hacked hboot.
patrick92260 said:
If your cid is original for rogers, the ota may not be working because you are s-off.
Click to expand...
Click to collapse
Bull**** Bull**** Bull****.
For getting OTA you need NOT rooted and NOT deodexed Stock-rom+stock recovery.
Don't try to make S-ON, it is great chance to brick the phone.
And your CID you can get with cid getter from the market.
Patrik, stop it plz.
Is there any risk or advantage to used to Asia one? Not sure I want to have that one my phone over the NA ones.
Would there not be a RUU or this Rogers release? Maybe I should just say the hell with it and just ROM it?
Kemanorell said:
Bull**** Bull**** Bull****.
For getting OTA you need NOT rooted and NOT deodexed Stock-rom+stock recovery.
Don't try to make S-ON, it is great chance to brick the phone.
And your CID you can get with cid getter from the market.
Patrik, stop it plz.
Click to expand...
Click to collapse
lol good one, so why would my evo 3d not flash the ota with a completely stock rom and recovery then with no root? only thing it had was s-off.
---------- Post added at 01:28 PM ---------- Previous post was at 01:24 PM ----------
Crash1912 said:
Is there any risk or advantage to used to Asia one? Not sure I want to have that one my phone over the NA ones.
Would there not be a RUU or this Rogers release? Maybe I should just say the hell with it and just ROM it?
Click to expand...
Click to collapse
It's a toss up if the RUU for rogers or the europe ICS ever shows up here. I am using the asian one and don't really notice any difference over the rogers or europe update. If you have radio s-off you can always downgrade by flashing a gingerbread RUU if you don't like the asian ICS RUU.
I had to run the Rogers gb ruu 1.20.631.2. It then update to 631.3 when I checked for updates. I then booted checked for updates again and it updated to ics. Now I'm running official Rogers ics but as I said I had to roll all the way back 1.20.631.2 and update all the way up from there.
And it does update the hboot but you can downgrade it with ruu previously mentioned.
Sent from my HTC EVO 3D X515a using Tapatalk 2
healer82 said:
I had to run the Rogers gb ruu 1.20.631.2. It then update to 631.3 when I checked for updates. I then booted checked for updates again and it updated to ics. Now I'm running official Rogers ics but as I said I had to roll all the way back 1.20.631.2 and update all the way up from there.
And it does update the hboot but you can downgrade it with ruu previously mentioned.
Sent from my HTC EVO 3D X515a using Tapatalk 2
Click to expand...
Click to collapse
Please link how this is done. I quickly scammed google, and couldnt find how to roll back to this. Looking to do ICS update today sometime.
js593 said:
Please link how this is done. I quickly scammed google, and couldnt find how to roll back to this. Looking to do ICS update today sometime.
Click to expand...
Click to collapse
Somewhere in the development thread there is a thread with shipped ruus already covered to pg86img.zip. Just find the Rogers one and put it on the root of your sd card and boot into bootloader. It will detect it and install 1.20.631.2 then just manually check for updates under about phone. The first update should be 1.20.631.3 which is 9.35mb then xcheck again and it's the ics update around 306 mb. Sorry I can't link to it you'll have to search the development forum. I've had it since it was posted way back when on my phone.
Make sure it's renamed PG86IMG.zip
http://forum.xda-developers.com/showthread.php?p=16450859
Sent from my HTC EVO 3D X515a using Tapatalk 2
healer82 said:
Somewhere in the development thread there is a thread with shipped ruus already covered to pg86img.zip. Just find the Rogers one and put it on the root of your sd card and boot into bootloader. It will detect it and install 1.20.631.2 then just manually check for updates under about phone. The first update should be 1.20.631.3 which is 9.35mb then xcheck again and it's the ics update around 306 mb. Sorry I can't link to it you'll have to search the development forum. I've had it since it was posted way back when on my phone.
Make sure it's renamed PG86IMG.zip
http://forum.xda-developers.com/showthread.php?p=16450859
Sent from my HTC EVO 3D X515a using Tapatalk 2
Click to expand...
Click to collapse
Would this be it?
http://forum.xda-developers.com/showthread.php?p=22501510&highlight=rogers#post22501510
js593 said:
Would this be it?
http://forum.xda-developers.com/showthread.php?p=22501510&highlight=rogers#post22501510
Click to expand...
Click to collapse
That seems to be the one yes.
Sent from my HTC EVO 3D X515a using Tapatalk 2
Ive tried to do this, after downloading it and putting it in the root directory of my phone. Hboot sees the image, stalls there for a few seconds then continues. nothing has happened. Ive tried installing it from CWM, no difference. I think i may need a bit more help then this. After it was detected, i did go and see if it was downgraded in the ABOUT, but it sits at .3 still.
Any ideas?
Okay, so for those people out there that are looking to do this, here's the functional way it worked for me (no errors, nothing happened during the update)
Download the .exe file,
EXECUTE the exe file from windows while the phone is plugges in. This will revert back to .2
Put phone into a wireless network once back up and running.
Update the phone as neccessary.
After the update, i noticed my Hboot when to 1.53.007. Now we just need to wait for a root.
Also, when i went into Recovery from Hboot, i noticed that it didnt do anything, sat there with a pic of my 3D and it had a red exclamation point. should that happen?
no luck
hi i have tried every method here with no go. i have s-on and phone is rooted. can some one post a working rom or something for the love of android!
looks like it was the bootloader it needs to be relocked using rootevo3dnew.zip. which will allow you to downgrade using the ruu file in windows. followed by the 2 updates in about phone and i got the ICS yay! if you have trouble search youtube for the video on "relocking evo 3d bootloader" it was easy, good luck ppl.
OTA_M7_UL_K443_SENSE60_MR_TMOUS_6.10.531.9-5.14.531.1_R_release_387954jjhcxbzgi6808nml.zip
View attachment 2934933
Here is the link to download the RUU from HTC website.
NEW T-Mobile HTC One RUU 3.24.531.3.
http://dl3.htc.com/application/RUU_...10.38m.1157.04_release_336982_signed_2(2).exe
Download from HTC Website
RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04
T-Mobile HTC One RUU 1.27.531.11
New direct download link from HTC http://dl3.htc.com/application/tmo/....20_10.40.1150.04_release_324846_signed_2.exe
T-Mobile Software updates for the HTC One
Manual system update instructions:
If you are outside of T-Mobile/Wi-Fi coverage, or the update is not found, you may perform a manual system update. This process requires that you download and install HTC Sync Manager first in order to get the proper drivers. If you do not have HTC Sync Manager installed already, you may download the software from http://www.htc.com/www/software/htc-sync-manager/.
WARNING: Performing the system update manually will delete all information from the device. Ensure all information is backed up before proceeding. See the Help & How To section of this website for more information on backing up your device contents.
Performing the ROM Update:
Download and save the HTC One™ for T-Mobile ROM update to your PC.
Connect your device to your PC via the supplied USB cable.
If the device is not recognized by the PC, ensure you have HTC Sync Manager installed and then disconnect and reconnect the device from the USB cable.
Once the device is properly recognized on the PC, locate the HTC One™ for T-Mobile ROM Update that you downloaded. Double-click on the file to launch the system update wizard.
Follow all of the system update wizard instructions shown on your PC.
Once the update is complete, click Finish in the Wizard and the device will reboot.
Once the device reboots, the initial setup wizard will appear.
Once the initial setup process is complete, the device is ready for use.
Click to expand...
Click to collapse
For error 155
Code:
Go to bootloader and do these commands:
fastboot oem lock
fastboot reboot
and run the RUU as administrator.
WARNING: Performing the system update manually will delete all information from the device. Ensure all information is backed up before proceeding. See the Help & How To section of this website for more information on backing up your device contents.
Performing the ROM Update:
Download and save the HTC One™ for T-Mobile ROM update to your PC.
Connect your device to your PC via the supplied USB cable.
If the device is not recognized by the PC, ensure you have HTC Sync Manager installed and then disconnect and reconnect the device from the USB cable.
Once the device is properly recognized on the PC, locate the HTC One™ for T-Mobile ROM Update that you downloaded. Double-click on the file to launch the system update wizard.
Follow all of the system update wizard instructions shown on your PC.
Once the update is complete, click Finish in the Wizard and the device will reboot.
Once the device reboots, the initial setup wizard will appear.
Once the initial setup process is complete, the device is ready for use.
Click to expand...
Click to collapse
Is ....is this the first RUU for our phone on T-Mobile? This is pretty huge, no?
craighwk said:
Is ....is this the first RUU for our phone on T-Mobile? This is pretty huge, no?
Click to expand...
Click to collapse
All HTC One RUU are 1GB.
Sent from my HTC One using Tapatalk 2
Garmig said:
All HTC One RUU are 1GB.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
I meant huge as in important. People have been clamoring for this for awhile and this is the first time I've seen an RUU for the T-Mobile variant.
I was thinking just yesterday how nice it would be to have an RUU on hand. Good timing.
Yay I can finally feel confident rooting this thing and loading some Roms. I was waiting for a proper way to get back to complete stock before dwelving into the process.
Sent from my HTC One using xda app-developers app
---------- Post added at 09:58 AM ---------- Previous post was at 09:47 AM ----------
So if we were tonflash an Intl 4.2.2 ROM and we wanted to revert back to stock 4.1.2 .is it safe to assume j could just follow the instructions as mentioned on the HTC site or is there a safer smarter way to flash a ruu such as in ruu mode. I'm new to HTC devices.
Sent from my HTC One using xda app-developers app
I'm assuming if I'm superCID, I need to change my CID back to T-Mo?
If I'm flashed to GPe, is there anything else I need to do other than changing the CID?
anyone know if i run this will it upgrade my hboot from 1.44 to 1.54?
if you need just the radio here you go
dronepro said:
if you need just the radio here you go
Click to expand...
Click to collapse
i actually think i may need to run the full RUU. i was s-off and rooted and went back to stock and locked bootloader to pull down OTA update, that all worked fine but now when im trying to run revone im getting segmentation fault and cant unlock. put S-on to start from scratch and now made it even worse. so my thought is to run the RUU if it wont upgrade my hboot then try revone again. sounds like i may be SOL though.
dozybolox13 said:
I'm assuming if I'm superCID, I need to change my CID back to T-Mo?
If I'm flashed to GPe, is there anything else I need to do other than changing the CID?
Click to expand...
Click to collapse
No you don't need to change your CID back superCID lets you run any RUU
Won't run! Help please!
I try to run the exe file. most of the times ive tried nothing comes up, finally i got an error message.
Error Code: -5005 : 0x8007000d
Error Information:
>Kernel\KernelMedia.cpp (95)
>SetupNew\setup.cpp (817)
PAPP:RUU
PVENDOR:HTC (http://www.HTC.com)
PGUID:50F2F878-636A-496F-A7CB-544C067E0C4B
$18.0.329PAK
@windows xp Service Pack 2 (2600)
IE Version: 9.10.9200.16635
I went to task manager and closed out of all other processes that could possibly have some remote connection to anything htc or android. I tried to start it up again and got the same error. can someone please help?
oh, just wanted to clarify, this will bring me 100% back to stock like how i got the phone out of the box? thanks.
shapiro1234567890 said:
I try to run the exe file. most of the times ive tried nothing comes up, finally i got an error message.
Error Code: -5005 : 0x8007000d
Error Information:
>Kernel\KernelMedia.cpp (95)
>SetupNew\setup.cpp (817)
PAPP:RUU
PVENDOR:HTC (http://www.HTC.com)
PGUID:50F2F878-636A-496F-A7CB-544C067E0C4B
$18.0.329PAK
@windows xp Service Pack 2 (2600)
IE Version: 9.10.9200.16635
I went to task manager and closed out of all other processes that could possibly have some remote connection to anything htc or android. I tried to start it up again and got the same error. can someone please help?
oh, just wanted to clarify, this will bring me 100% back to stock like how i got the phone out of the box? thanks.
Click to expand...
Click to collapse
What is your MID and CID?
fetalp said:
What is your MID and CID?
Click to expand...
Click to collapse
im sorry, i have no idea what either of those 2 are? im rooted with the gp rom installed.
im having the same issue
shapiro1234567890 said:
I try to run the exe file. most of the times ive tried nothing comes up, finally i got an error message.
Error Code: -5005 : 0x8007000d
Error Information:
>Kernel\KernelMedia.cpp (95)
>SetupNew\setup.cpp (817)
PAPP:RUU
PVENDOR:HTC (http://www.HTC.com)
PGUID:50F2F878-636A-496F-A7CB-544C067E0C4B
$18.0.329PAK
@windows xp Service Pack 2 (2600)
IE Version: 9.10.9200.16635
I went to task manager and closed out of all other processes that could possibly have some remote connection to anything htc or android. I tried to start it up again and got the same error. can someone please help?
oh, just wanted to clarify, this will bring me 100% back to stock like how i got the phone out of the box? thanks.
Click to expand...
Click to collapse
erider said:
i actually think i may need to run the full RUU. i was s-off and rooted and went back to stock and locked bootloader to pull down OTA update, that all worked fine but now when im trying to run revone im getting segmentation fault and cant unlock. put S-on to start from scratch and now made it even worse. so my thought is to run the RUU if it wont upgrade my hboot then try revone again. sounds like i may be SOL though.
Click to expand...
Click to collapse
I don't think so I think you just have to wait for everyone to update to this new base remember in order to do this you also have to have a different base when you first used his software
Hi, when I run the RUU, does it preserve user data or it restores everything to completely stock?
Thanks!
rbaggio00 said:
im having the same issue
Click to expand...
Click to collapse
any fix for this? Im also having the same error...
Same thing here as well, Windows 7 64 bit. Nothing obvious running in the background that could cause the issue. HTC drivers installed.
Trahald said:
Hi, when I run the RUU, does it preserve user data or it restores everything to completely stock?
Thanks!
Click to expand...
Click to collapse
Pretty sure you lose everything: (from the HTC website)
WARNING: Performing the system update manually will delete all information from the device. Ensure all information is backed up before proceeding. See the Help & How To section of this website for more information on backing up your device contents.
Hello, Please help.....
I'm not an USA Citizen and don't live in USA so i'm not Verizon costumer But i have Verizon sim card.
I can not update my phone on ANDROID 4.2.2 :crying: :crying: Please if there is any way to update my phone please help me to update.
Anyone????????
Anyone????????
I have a droid dna too. But i'm in vietnam. Same problem like you. I'm running 4.1 with sense 4+. Cannot update ota to sense 5. Droid dna cannot check update in global mode. But in vietnam, no cdma service for droid dna. I think there are 2 way to update it.
1. Find and run a ruu sense 5 for it
2. Unlock bootloader and flash a cook rom with sense 5
Sent from my HTC6435LVW using Tapatalk
Search the DNA section here. There is the ota zips and the ruu.exe. it wouldn't take long to find them.
Sent from my DNA using my mind.
Here is Sense 5 Ruu 3.06.605.4
Thanks to FLYHALF205
http://flyhalf205.com/RUU/.direct_link_only/RUU_DLX_WL_JB_50_S_VERIZON_WWE_3.06.605.4_Radio_1.01.01.1112_NV_VZW_4.46_002_release_340974_signed_2.exe
hemsmaverick said:
Here is Sense 5 Ruu 3.06.605.4
Thanks to FLYHALF205
http://flyhalf205.com/RUU/.direct_link_only/RUU_DLX_WL_JB_50_S_VERIZON_WWE_3.06.605.4_Radio_1.01.01.1112_NV_VZW_4.46_002_release_340974_signed_2.exe
Click to expand...
Click to collapse
Should you have to be S-off for running this RUU?
Tried this file on a S-On, locked DNA and got a ROM failure. I`m on 2.07
slightee said:
Should you have to be S-off for running this RUU?
Tried this file on a S-On, locked DNA and got a ROM failure. I`m on 2.07
Click to expand...
Click to collapse
I don't think it matters sense it is a RUU.
fastboot oem rebootRUU
fastboot flash zip nameofzip.zip
fastboot reboot
hemsmaverick said:
Here is Sense 5 Ruu 3.06.605.4
Thanks to FLYHALF205
Click to expand...
Click to collapse
Warning that an RUU will wipe every single thing on your device INCLUDING the /sdcard partition.
Tried to run this RUU again. Getting IMAGE ERROR:158. I`m S-On and Locked. Software version 2.07
Am i missing something?
slightee said:
Tried to run this RUU again. Getting IMAGE ERROR:158. I`m S-On and Locked. Software version 2.07
Am i missing something?
Click to expand...
Click to collapse
Download again the rue and try again
I think the fastest way is
1. S-OFF your device and Unlock boot loader
2. Flash custom recovery
3. Install custom stock rom with bloatware or debloatware
GeOxD said:
Hello, Please help.....
I'm not an USA Citizen and don't live in USA so i'm not Verizon costumer But i have Verizon sim card.
I can not update my phone on ANDROID 4.2.2 :crying: :crying: Please if there is any way to update my phone please help me to update.
Click to expand...
Click to collapse
You can try this but I cannot guarantee that this will work. but it has worked for me. first off go to about-software update, and their on the top right corner is a settings button where it says update over wifi connection and make sure that this box is checked. then take out the sim and then go to settings-mobile data-preferred network and change from gsm/umts to cdma/lte. now make sure that your phone is connected to a wifi connection. you will get a message saying no cdma connection was found. just hit okay and ignore it. then go to settings- apps- all- and find google services framework and then hit clear data then force stop. now go to settings- software update- check new. do NOT go to settings-about-software update-check new to check for updates because it did not work for me and kept telling me that their was no update. I do not know why but if its confusing to understand then make this note- if the check new option is under status then you are in the right place.
slightee said:
Tried to run this RUU again. Getting IMAGE ERROR:158. I`m S-On and Locked. Software version 2.07
Am i missing something?
Click to expand...
Click to collapse
Same thing for me, then I read it says that in order to use this RUU, you must revert back to the stock 1.15 hboot and 1.15 Stock Recovery but when I use the RUU to get back I also get the IMAGE ERROR: 158.
These are the steps i took to get the Kit Kat update.
I couldnt get the update OTA like most people and i was completely stock.
So if you are in a similar position these steps may help.
DO AT YOUR OWN RISK!
1. Unlock your bootloader and get root access. I did by following these instructions from this video.
Credits goes to sakitech.
https://www.youtube.com/watch?v=kJYAS2KN17Y&feature=youtu.be
2. Gain S-OFF by following these instructions from this video.
Credits goes to sakitech.
https://www.youtube.com/watch?v=NeFwsqU4YL4
3. After you have completed these steps successfully head over to @clsA thread and download the AT&T 4.4.2 OTAPkg.zip and the
stock Recovery_Cingular_US_3.17.502.3.img. Link to the thread http://forum.xda-developers.com/showthread.php?t=2659374
4. Place the downloaded .zip on the root your phone storage.
5. follow the steps in @clsA post and flash Recovery_Cingular_US_3.17.502.3.img via fastboot.
6. Navigate to recovery from fastboot on your HTC ONE. If you see "Mount SDCard failed" ignore it. goto to phone storage and locate the update.zip and flash it.
Click to expand...
Click to collapse
this worked for me, it should also work for anyone else.
ALL CREDITS goes to the creator of the video - sakitech and Senior Member here on xda clsA
Click to expand...
Click to collapse
r3al_0g said:
These are the steps i took to get the Kit Kat update.
I couldnt get the update OTA like most people and i was completely stock.
So if you are in a similar position these steps may help.
DO AT YOUR OWN RISK!
this worked for me, it should also work for anyone else.
Click to expand...
Click to collapse
So am I the only person who went into settings and Clicked AT&T update and got the 4.4.2 update that way. I have never had a phone in all my life tell me an update was ready. I always had to check manually about once or twice a week out of boredom. Did the same with my ONE last week and sure enough there was an update and it downloaded and installed fine.
Solarenemy68 said:
So am I the only person who went into settings and Clicked AT&T update and got the 4.4.2 update that way. I have never had a phone in all my life tell me an update was ready. I always had to check manually about once or twice a week out of boredom. Did the same with my ONE last week and sure enough there was an update and it downloaded and installed fine.
Click to expand...
Click to collapse
i have been clicking the check for update link at least 10 times a day since the update was released and i didnt get it ota i had to do it manually
If you're stock, you should be able to get the update just by changing the date. I brought my phone back to stock (3.17.502.3) then just kept hitting Software Update. If it didn't update, advance the date and try again. After a few date changes, the update was offered.
chp said:
If you're stock, you should be able to get the update just by changing the date. I brought my phone back to stock (3.17.502.3) then just kept hitting Software Update. If it didn't update, advance the date and try again. After a few date changes, the update was offered.
Click to expand...
Click to collapse
ok thanks for the info.. ill add it to the post if its not a prob
r3al_0g said:
These are the steps i took to get the Kit Kat update.
I couldnt get the update OTA like most people and i was completely stock.
So if you are in a similar position these steps may help.
DO AT YOUR OWN RISK!
this worked for me, it should also work for anyone else.
Click to expand...
Click to collapse
Will it work if you are running a custom recovery like TWRP?
ExcelonGT said:
Will it work if you are running a custom recovery like TWRP?
Click to expand...
Click to collapse
Custom recovery won't work.. U will have to b on stock 4.3 and S-OFF with stock recovery thats mentioned above..
Sent from my LG-D801 using Tapatalk
r3al_0g said:
Custom recovery won't work.. U will have to b on stock 4.3 and S-OFF with stock recovery thats mentioned above..
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Anyone know if there are issues with S-Off and rooting since the update? I am 100% stock, non rooted, never installed a rom. Its been stock since the day I got it. I planned on getting the AT&T update to 4.4.2, rooting, making an update then testing some roms.
I know with other phones the update screwed some things up so I didn't know if rooting/s-off were an issue since the update.
Thanks ll!
Edit:
nevermind...found it: http://forum.xda-developers.com/showthread.php?t=2663122
So what exactly do we need to get OTA?
Stock recovery, android 4.3, locked bootloader?
I have all that, and still not finding an OTA update. Manually looking for the update, and I'm just not getting it.
lettuceman44 said:
So what exactly do we need to get OTA?
Stock recovery, android 4.3, locked bootloader?
I have all that, and still not finding an OTA update. Manually looking for the update, and I'm just not getting it.
Click to expand...
Click to collapse
unlocked bootloader, stock 4.3 and s-off, stock recovery.. download the ota place it on ur phone reboot into recovery and flash it.. that worked for me
r3al_0g said:
unlocked bootloader, stock 4.3 and s-off, stock recovery.. download the ota place it on ur phone reboot into recovery and flash it.. that worked for me
Click to expand...
Click to collapse
Oh, I meant from at&t over the air. I feel like I'm missing something, so trying to find out what the ota requirements are.
I can't flash it yet, I only have a windows 8.1 computer with usb 3.0 ports. Fastboot doesn't work.
lettuceman44 said:
Oh, I meant from at&t over the air. I feel like I'm missing something, so trying to find out what the ota requirements are.
I can't flash it yet, I only have a windows 8.1 computer with usb 3.0 ports. Fastboot doesn't work.
Click to expand...
Click to collapse
@chp recommend advancing your date and try and see if the update comes through. Try it a few times and see if it will work for you also
Sent from my LG-D801 using Tapatalk
Tried that with no luck. Had to do a factory reset because I went to far, and my OTA check was in -300 hours.
You guys are forgetting that to be able to update the OTA, you need to have an ACTIVE at&t sim card inserted to your phone. I think this is the reason for all the confusion around since not everybody lives in the US
Downgrade to 4.3
OK, so I was able to upgrade but now I messed it up trying to patch default.xml. :crying:
I am trying to revert to the 4.3 with RRU but I get error 155.
I am S-Off, HBOOT 1.56.
I tried with bootloader re-locked, unlocked, locked. I tried with stock recovery and with ClockWM recovery both locked and unlocked.
I also tried to re-apply the patch with stock recover but it fails verification...
Any ideas how do I go back or fix this?
Thanks
Adrian
Tutorial
How to Update HTC One AT&T android 4.4.2 and root:
http://forum.xda-developers.com/show...79356166999787
Gabe09196 said:
You guys are forgetting that to be able to update the OTA, you need to have an ACTIVE at&t sim card inserted to your phone. I think this is the reason for all the confusion around since not everybody lives in the US
Click to expand...
Click to collapse
i kinda figured n yea im not from the US so this was the only method that worked for me
agoyeneche said:
OK, so I was able to upgrade but now I messed it up trying to patch default.xml. :crying:
I am trying to revert to the 4.3 with RRU but I get error 155.
I am S-Off, HBOOT 1.56.
I tried with bootloader re-locked, unlocked, locked. I tried with stock recovery and with ClockWM recovery both locked and unlocked.
I also tried to re-apply the patch with stock recover but it fails verification...
Any ideas how do I go back or fix this?
Thanks
Adrian
Click to expand...
Click to collapse
The BEST way to make sure that you can run the RUU, whether it be the ATT version, or the Dev Edition is to make sure you downgrade the HBOOT to 1.44. You will never see than error again. No problems at all. Why on Earth though would you want the ATT version, when you can Dev it, and take the 4.4.2 OTA with no carrier BS?
hack14u said:
The BEST way to make sure that you can run the RUU, whether it be the ATT version, or the Dev Edition is to make sure you downgrade the HBOOT to 1.44. You will never see than error again. No problems at all. Why on Earth though would you want the ATT version, when you can Dev it, and take the 4.4.2 OTA with no carrier BS?
Click to expand...
Click to collapse
Thank you.
Actually that is what I did. After downgrading HBoot I was able to use the RRU.
Unfortunately I use my phone for work with Mobileiron and will flag it to IT if I'm rooted. I have tried a couple of workaround so but did not work very well. Every time I try to monkey with it IT starts getting emails every 30 min saying my device is not compliant and I am rooted.... So my best solution is to unlock boot loader and flash mods there. Which got me into this trouble....
I can't navigate to the recovery after I flashed Recovery_Cingular_US_3.17.502.3.img to install the OTA. I've tried going to recovery mode and then pressing Power + Vol. Up to no avail. Any help?
Hello all,
I found a link for the Desire 601 (Virgin Mobile) KitKat RUU. This is for ZARA_CL variant with CID SPCS_002.
NEW! RUU HTC Desire 601 (Virgin Mobile) 2.15.652.15 Downloads (Stagefright Patch):
Direct from HTC
Android File Host
RUU HTC Desire 601 (Virgin Mobile) 2.15.652.3 Downloads (KitKat Update):
Direct from HTC
Google Drive
MEGA
Android File Host
RUU HTC Desire 601 (Virgin Mobile) 1.10.652.9 Downloads (Original Jelly Bean):
Android File Host
Awesome. Finally we have a Kitkat RUU. I havnt needed to use one yet. But considering Ill be using this phone for a while still, its nice to know we have. Thanks as always @-Duir-. You have been a real help for people on this device.
Think this will work for a Globalive UL?
Sent from my HTC Desire 601 using Tapatalk
-Duir- said:
Hello all,
I found a link for the Desire 601 (Virgin Mobile) KitKat RUU. This is for ZARA_CL variant with CID SPCS_002.
RUU HTC Desire 601 (Virgin Mobile) 2.15.652.3 Downloads:
Direct from HTC
Google Drive
MEGA
Click to expand...
Click to collapse
Where did you find it? Can you please look for a WWE version of this RUU
anyway thanks for the info @-Duir-
bunyan69 said:
Think this will work for a Globalive UL?
Sent from my HTC Desire 601 using Tapatalk
Click to expand...
Click to collapse
As mentioned in OP, it's just for Virgin Mobile ZARA_CL.
Akishima said:
Where did you find it? Can you please look for a WWE version of this RUU
anyway thanks for the info @-Duir-
Click to expand...
Click to collapse
This is direct from HTC. HTC, well HTC US so far, has started making their RUUs available. But only for what they consider "current" devices.
The just officially started on 12/31 so hopefully the other HTC branches will follow. If they do, I'll post them.
I've got a noob question. Because i don't feel like i fully understand what Google results showed me, would flashing an RUU be the same (or similar) to flashing the stock kitkat version?
ShaqBoss said:
I've got a noob question. Because i don't feel like i fully understand what Google results showed me, would flashing an RUU be the same (or similar) to flashing the stock kitkat version?
Click to expand...
Click to collapse
Yeah, it wipes everything an returns it to complete stock.
Just the original KK firmware
The RUU restore just the original firmware. If you have Unlock and S-off and tampered, it will stay the same and unaffected. One plus from restoring with KK RUU is if you have the hcheck issue from restoring to stock through TWRP and having a boot loop, it will fix it
ct760ster said:
The RUU restore just the original firmware. If you have Unlock and S-off and tampered, it will stay the same and unaffected. One plus from restoring with KK RUU is if you have the hcheck issue from restoring to stock through TWRP and having a boot loop, it will fix it
Click to expand...
Click to collapse
?!?!?!?
The RUU restores everything, not just firmware.
It doesn't care if you're S-OFF or not.
It only won't work if your S-ON with your bootloader unlocked, if you're S-OFF it will work just fine with unlocked bootloader.
Also, RUUs are so thorough at restoring your phone to stock, they remove the tampered flag.
The hcheck issue was only in JB not KitKat, so if someone is running KK RUU they don't even need to worry about it.
I have a couple questions if anyone could be of help i am currently running the clockwork senseless rom 4.2.2, I'm s-off bootloader is unlocked I'm wondering if I have to use an run from here(I have Virgin Mobile) to update and if I do what will change? Will my partition table change or my SD card or u internal memory be erased? Will it change my hboot version? Will it change my s-off status? I realized most of the custom rom for the zara-cl require kk firmware and so i want to update mine to be able to flash the other Roms. Thanks in advance for anyone helping me out.
Do u have to download these with a computer or laptop for them to work right? I have downloaded every link of the kit Kat RUU with my phone then transferred into my laptop but I can't get the program to work it will load and then have me accept the policy agreement and once I hit the "next" button it closes and then does nothing, so do I have to download using a laptop? Any help is appreciated thanks!
LeoDroid30 said:
Do u have to download these with a computer or laptop for them to work right? I have downloaded every link of the kit Kat RUU with my phone then transferred into my laptop but I can't get the program to work it will load and then have me accept the policy agreement and once I hit the "next" button it closes and then does nothing, so do I have to download using a laptop? Any help is appreciated thanks!
Click to expand...
Click to collapse
Not the first time I see this, most of the times caused by MS Windows. See this FAQ at #10
The FAQ isn't for the Desire 601 but its the same thing for all HTC executable RUUs.
alray said:
Not the first time I see this, most of the times caused by MS Windows. See this FAQ at #10
The FAQ isn't for the Desire 601 but its the same thing for all HTC executable RUUs.
Click to expand...
Click to collapse
Hey thanks a lot for the help! I ended up trying that downloaded that program installed it and then I actually got the RUU to work..!..... But for some reason right when it starts to update an error pops up saying that the program htc_fastboot.exe has stopped working? I think that's what it said. But I don't have that program in my adb folder all I have is just fastboot? Luckily nothing happened to my phone it just rebooted and everything is still here... Do I need to find that program and put it in my adb folder?
Sent from my HTC0P4E1 using Tapatalk
LeoDroid30 said:
Hey thanks a lot for the help! I ended up trying that downloaded that program installed it and then I actually got the RUU to work..!..... But for some reason right when it starts to update an error pops up saying that the program htc_fastboot.exe has stopped working? I think that's what it said. But I don't have that program in my adb folder all I have is just fastboot? Luckily nothing happened to my phone it just rebooted and everything is still here... Do I need to find that program and put it in my adb folder?
Sent from my HTC0P4E1 using Tapatalk
Click to expand...
Click to collapse
htc_fastboot.exe is htc's version of fastboot packed with the RUU installer. This is the version of fastboot the installer is unsing to flash the RUU on your phone and it looks like its not working for an unknown reason.... Probably something wrong with your computer, I would try on another PC or try to update/fix your Windows.
alray said:
htc_fastboot.exe is htc's version of fastboot packed with the RUU installer. This is the version of fastboot the installer is unsing to flash the RUU on your phone and it looks like its not working for an unknown reason.... Probably something wrong with your computer, I would try on another PC or try to update/fix your Windows.
Click to expand...
Click to collapse
Hey I appreciate your feedback.... If u would recommend I have windows 8 currently and didn't know if windows 10 was the same when it came to ADB and if it would mess any of that up that is only reason I haven't updated lol but will it do that or does everything work the same in Windows 10? Thanks again for ur time.
Sent from my HTC0P4E1 using Tapatalk