Related
I installed Safestrap onto my GS4 in hopes of installing a ROM to get ride of touchwiz. I found a safestrap compatible ROM and installed it through safestrap. Now I cant boot into the system. I wiped all data and cache and factory setting. When ever I restart, sometimes it says: [Safestap: Disabled] or [Safestrap: enabled] I can access recovery. I tapped continue on both and just doesn't work.
Bit of a noob so dont be too hard
EDIT: I Installed Hyperdrive successfully until the end. Its at this screen: Beginning Android OS 4.3 boot sequence... .... .... ...." It has stayed here for hours, all night. Should I take out the battery? Buttons don't work
High_Rez said:
I installed Safestrap onto my GS4 in hopes of installing a ROM to get ride of touchwiz. I found a safestrap compatible ROM and installed it through safestrap. Now I cant boot into the system. I wiped all data and cache and factory setting. When ever I restart, sometimes it says: [Safestap: Disabled] or [Safestrap: enabled] I can access recovery. I tapped continue on both and just doesn't work.
Bit of a noob so dont be too hard
Click to expand...
Click to collapse
So you created a rom slot and flashed the rom to that slot? What build base are you..why SS version did u use and rom did u flash ...?
Sent from my SCH-I545 using XDA Premium 4 mobile app
decaturbob said:
So you created a rom slot and flashed the rom to that slot? What build base are you..why SS version did u use and rom did u flash ...?
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I created the rom slot. Im MK2, I used safestrap because I have a locked BL. Whats SS? I used a ROM called Barebone Stock.
When ever I flash a rom, all that happens when I restart is it says safestrap: Disabled or enabled. I choose recovery every time because rebooting doesnt do any thing.
High_Rez said:
I created the rom slot. Im MK2, I used safestrap because I have a locked BL. Whats SS? I used a ROM called Barebone Stock.
When ever I flash a rom, all that happens when I restart is it says safestrap: Disabled or enabled. I choose recovery every time because rebooting doesnt do any thing.
Click to expand...
Click to collapse
SS is SafeStrap but you should try to uninstall the rom and reboot into stock and then go back and try to reinstall the rom
Sent from my SCH-I545 using Tapatalk
High_Rez said:
I created the rom slot. Im MK2, I used safestrap because I have a locked BL. Whats SS? I used a ROM called Barebone Stock.
When ever I flash a rom, all that happens when I restart is it says safestrap: Disabled or enabled. I choose recovery every time because rebooting doesnt do any thing.
Click to expand...
Click to collapse
SS = abreviation for safestrap, thought that was pretty obvious
barebone ROM? Im not familar with that one being SS compatible. The safestrap disabled msg on display means the stock rom slot is active and the phone should boot to stock. When you have rom loaded into a rom slot 1 or 2 or whatever, you must "activate" that slot for it to boot. I would suggest deleting the rom slot you made and start over.
decaturbob said:
SS = abreviation for safestrap, thought that was pretty obvious
barebone ROM? Im not familar with that one being SS compatible. The safestrap disabled msg on display means the stock rom slot is active and the phone should boot to stock. When you have rom loaded into a rom slot 1 or 2 or whatever, you must "activate" that slot for it to boot. I would suggest deleting the rom slot you made and start over.
Click to expand...
Click to collapse
So I made a 3rd rom slot and installed hyperdrive. everthing went well until the end. Its at this screen that says "Beginning Android OS 4.3 boot sequence...." Its been on this screen for hours. All night
High_Rez said:
So I made a 3rd rom slot and installed hyperdrive. everthing went well until the end. Its at this screen that says "Beginning Android OS 4.3 boot sequence...." Its been on this screen for hours. All night
Click to expand...
Click to collapse
So, let's start from the basics - you're not telling us what versions of anything that you're using.
First, what build is your phone? i.e. the stock slot.
What version of Safestrap are you trying to use?
What version of Hyperdrive are you trying to flash?
When the phone hangs like that during boot, something critical has crashed that's preventing the boot.
You're booting Android 4.3 according to the above, so you should be flashing using SS 3.71 on build MJ7 or MK2 and Hyperdrive RLS14.
If all that is correct: the build is MJ7 or MK2, the Safestrap is 3.71, and you're trying Hyperdrive RLS14, then the likely cause is that you have a bad download. Check the md5sum after downloading to ensure that it's OK. Download it to your PC, not directly to the phone, then check the MD5 before transferring it to your sdcard and flashing it.
k1mu said:
So, let's start from the basics - you're not telling us what versions of anything that you're using.
First, what build is your phone? i.e. the stock slot.
What version of Safestrap are you trying to use?
What version of Hyperdrive are you trying to flash?
When the phone hangs like that during boot, something critical has crashed that's preventing the boot.
You're booting Android 4.3 according to the above, so you should be flashing using SS 3.71 on build MJ7 or MK2 and Hyperdrive RLS14.
If all that is correct: the build is MJ7 or MK2, the Safestrap is 3.71, and you're trying Hyperdrive RLS14, then the likely cause is that you have a bad download. Check the md5sum after downloading to ensure that it's OK. Download it to your PC, not directly to the phone, then check the MD5 before transferring it to your sdcard and flashing it.
Click to expand...
Click to collapse
My buld is MK2
The The SS version is: it doesnt say. But is says TWRP v2.6.3.1.
Im using hyperdrive RLS14 S4.zip
I have my SD in my PC and I downloaded it from the forum to it. then flashed it. Also I think I screwed up stock because i cant access the system. I cant boot into it.
High_Rez said:
My buld is MK2
The The SS version is: it doesnt say. But is says TWRP v2.6.3.1.
Im using hyperdrive RLS14 S4.zip
I have my SD in my PC and I downloaded it from the forum to it. then flashed it. Also I think I screwed up stock because i cant access the system. I cant boot into it.
Click to expand...
Click to collapse
OK, If your stock slot is damaged, you probably need to re-flash and start over.
Download the MK2 "No-Wipe" rom image from this thread and flash it using ODIN 3.09 - that'll get you back to stock, Then try the Safestrap stuff again. Seems like you have the right versions of things, so if you follow the directions, it should boot OK.
Be sure to check the MD5 of anything you download. There's free software available that does that.
k1mu said:
OK, If your stock slot is damaged, you probably need to re-flash and start over.
Download the MK2 "No-Wipe" rom image from this thread and flash it using ODIN 3.09 - that'll get you back to stock, Then try the Safestrap stuff again. Seems like you have the right versions of things, so if you follow the directions, it should boot OK.
Be sure to check the MD5 of anything you download. There's free software available that does that.
Click to expand...
Click to collapse
Do I need to worry about any root?
High_Rez said:
Do I need to worry about any root?
Click to expand...
Click to collapse
Yeah after you flash the image in Odin use the saferoot guide that k1mu posted to obtain root again.
Sent from my HTC6600LVW using XDA Premium 4 mobile app
k1mu said:
OK, If your stock slot is damaged, you probably need to re-flash and start over.
Download the MK2 "No-Wipe" rom image from this thread and flash it using ODIN 3.09 - that'll get you back to stock, Then try the Safestrap stuff again. Seems like you have the right versions of things, so if you follow the directions, it should boot OK.
Be sure to check the MD5 of anything you download. There's free software available that does that.
Click to expand...
Click to collapse
I just dont see why I need to restart every thing. Is there any other possible way?
High_Rez said:
I just dont see why I need to restart every thing. Is there any other possible way?
Click to expand...
Click to collapse
Well is your stock slot still working? If u just messed up a ROM slot than you can erase them and start over.
But if it was your stock slot then using Odin probably is the only thing that will help you.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Well is your stock slot still working? If u just messed up a ROM slot than you can erase them and start over.
But if it was your stock slot then using Odin probably is the only thing that will help you.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Ok. Thanks
High_Rez said:
Ok. Thanks
Click to expand...
Click to collapse
Are you all set now?? Sounds to me like you messed up the stock slot from what I could gather from earlier posts.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Are you all set now?? Sounds to me like you messed up the stock slot from what I could gather from earlier posts.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Odin is not reading my phone. Yeah, all i need to do it flash the original firmware and root it and start over. But i dont see how that could work.
High_Rez said:
Odin is not reading my phone. Yeah, all i need to do it flash the original firmware and root it and start over. But i dont see how that could work.
Click to expand...
Click to collapse
I heard that you need to use the cord that came with the phone when you got it. So make sure you are and also try another USB port.
Sent from my SCH-I545 using Tapatalk
High_Rez said:
Odin is not reading my phone. Yeah, all i need to do it flash the original firmware and root it and start over. But i dont see how that could work.
Click to expand...
Click to collapse
Well you probably just need the USB drivers for your phone that's all. I just went through that myself with my new laptop. I ended up just googling it and finding the right ones.
It will work for you, once your back to stock just use Saferoot again, then install SafeStrap again... Then be certain whatever ROM u flash is SafeStrap compatible. I'd say use ROM slots for the time being until your more comfortable with things.... Don't take that the wrong way... Just saying is all. Messing with the stock slot can lead you back to where you're at right now that's all.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 03:19 PM ---------- Previous post was at 03:17 PM ----------
Try the drivers that k1mu has in his saferoot thread
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Well you probably just need the USB drivers for your phone that's all. I just went through that myself with my new laptop. I ended up just googling it and finding the right ones.
It will work for you, once your back to stock just use Saferoot again, then install SafeStrap again... Then be certain whatever ROM u flash is SafeStrap compatible. I'd say use ROM slots for the time being until your more comfortable with things.... Don't take that the wrong way... Just saying is all. Messing with the stock slot can lead you back to where you're at right now that's all.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 03:19 PM ---------- Previous post was at 03:17 PM ----------
Try the drivers that k1mu has in his saferoot thread
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I found the drivers but they say its already installed on my computer.
High_Rez said:
I found the drivers but they say its already installed on my computer.
Click to expand...
Click to collapse
Reinstall them then restart your computer
Sent from my SCH-I545 using Tapatalk
Wow. Bonehead mistake. I went from Sarge's 4.4.2 rooted rom to Hyperdrive 16.1 via safestrap and I forgot to flash the nc5 module before rebooting and now my wifi wont work and I can't reboot into safestrap.
Anyone know what I can do to recover wifi/safestrap?
tjhooker4 said:
Wow. Bonehead mistake. I went from Sarge's 4.4.2 rooted rom to Hyperdrive 16.1 via safestrap and I forgot to flash the nc5 module before rebooting and now my wifi wont work and I can't reboot into safestrap.
Anyone know what I can do to recover wifi/safestrap?
Click to expand...
Click to collapse
did you flash su before you rebooted?
If you didn't do that you will most likely have to start the process completely over....
decaturbob said:
did you flash su before you rebooted?
If you didn't do that you will most likely have to start the process completely over....
Click to expand...
Click to collapse
Eeek. I did not. When you say start the whole process over, what are you referring to? Will I even be able to use saferoot from 4.4.2 HD16.1?
*edit: I should add - I don't have root on this ROM.
tjhooker4 said:
Eeek. I did not. When you say start the whole process over, what are you referring to? Will I even be able to use saferoot from 4.4.2 HD16.1?
*edit: I should add - I don't have root on this ROM.
Click to expand...
Click to collapse
I mean if you did the upgrade..downgrade method by surge...you have to start completely over...same with whatever method you used. Best to make a checklist as you missed several key steps
sent by baja kitkat S4
decaturbob said:
I mean if you did the upgrade..downgrade method by surge...you have to start completely over...same with whatever method you used. Best to make a checklist as you missed several key steps
sent by baja kitkat S4
Click to expand...
Click to collapse
I know. Will do. And thanks for the tips/help. Very much appreciated.
Would you advise using this method?
tjhooker4 said:
I know. Will do. And thanks for the tips/help. Very much appreciated.
Would you advise using this method?
Click to expand...
Click to collapse
I don't know anything about that. I did surge's method after I did a full wipe MK2 to my phone. Important to have a check list
I forgot to add the SU file after flashing Echoe Rom and I had to start all over. In your case, I don't think you even have to flash SU after flashing Hyperdrive 16.1 bc SU is cooked into the Rom.
Sent from my SCH-I545 using XDA Premium 4 mobile app
dm1105 said:
I forgot to add the SU file after flashing Echoe Rom and I had to start all over. In your case, I don't think you even have to flash SU after flashing Hyperdrive 16.1 bc SU is cooked into the Rom.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You do have to flash it with HD, it never hurts regardless. With your phone running partitions from different firmwares baked in SU won't always work
Sent from my HTC6600LVW using Tapatalk
joshm.1219 said:
You do have to flash it with HD, it never hurts regardless. With your phone running partitions from different firmwares baked in SU won't always work
Sent from my HTC6600LVW using Tapatalk
Click to expand...
Click to collapse
Sounds like sound advice to me :good:. I don't see how it can hurt either. Better safe than sorry.
There is a root now, but no WiFi?
First off, I want to thank everyone involved for rooting NC5! :highfive:
Now, onto my problem. I still can't seem to get Wi-Fi working on my NC5/Verizon S4! I have the Hyperdrive 16.1 ROM installed, and everything works well except I just CANNOT turn on my Wi-Fi! I've tried flashing modem modules and such through Odin and SafeStrap, but nothing seems to work.
Any ideas on what I should do that DOESN'T include wiping and starting over?
Thanks,
JB
(PS -- This is my first post, so be gentle, LOL!)
ShnikeJSB said:
First off, I want to thank everyone involved for rooting NC5! :highfive:
Now, onto my problem. I still can't seem to get Wi-Fi working on my NC5/Verizon S4! I have the Hyperdrive 16.1 ROM installed, and everything works well except I just CANNOT turn on my Wi-Fi! I've tried flashing modem modules and such through Odin and SafeStrap, but nothing seems to work.
Any ideas on what I should do that DOESN'T include wiping and starting over?
Thanks,
JB
(PS -- This is my first post, so be gentle, LOL!)
Click to expand...
Click to collapse
Gigilies wifi fix works for many. You flash the zip in safe strap
Sent from my SCH-I545 using Tapatalk
ShnikeJSB said:
First off, I want to thank everyone involved for rooting NC5! :highfive:
Now, onto my problem. I still can't seem to get Wi-Fi working on my NC5/Verizon S4! I have the Hyperdrive 16.1 ROM installed, and everything works well except I just CANNOT turn on my Wi-Fi! I've tried flashing modem modules and such through Odin and SafeStrap, but nothing seems to work.
Any ideas on what I should do that DOESN'T include wiping and starting over?
Thanks,
JB
(PS -- This is my first post, so be gentle, LOL!)
Click to expand...
Click to collapse
Root it with Towelroot. Then you can install Safestrap and then flash the modules.
As a MDK owner lately my wifi on HD16.1 turns on fine, but i cant data to go through (send receive nothing at all, worse than having 1 bar on 3g bad). I'm headed to my girls in a bit for dinner where i'll hop on her wifi and find out if its junky comcast router i have or ROM related.
Edit/update: It's my home router right now on at+t n no issues with six AL or data
I have already rooted with Towelroot, and can boot into Safestrap fine. I've tried flashing "gogolies-wififix-VZW-retail-NC5-w-modules-SS.zip" and "I545VRUFNC5_modem.zip" and "jfltevzw-NC5-modules.zip" in Safestrap, as well as "modem-only-NC5-odin.tar" in Odin. Nothing works.
ShnikeJSB said:
I have already rooted with Towelroot, and can boot into Safestrap fine. I've tried flashing "gogolies-wififix-VZW-retail-NC5-w-modules-SS.zip" and "I545VRUFNC5_modem.zip" and "jfltevzw-NC5-modules.zip" in Safestrap, as well as "modem-only-NC5-odin.tar" in Odin. Nothing works.
Click to expand...
Click to collapse
there is a standalone wifi fix zip that gigilie put out, flash that "gogolies-wififix-VZW-FN2-NC2-w-modules-SS.zip" it may work better for you
WOOHOO!
decaturbob said:
there is a standalone wifi fix zip that gigilie put out, flash that "gogolies-wififix-VZW-FN2-NC2-w-modules-SS.zip" it may work better for you
Click to expand...
Click to collapse
YESSSSSS!!!
:victory:
Thank you SO very much!!! I now have wifi back after flashing with the gogolie nc2 file you named! Phew, these data overages were killing me... What a load off my back!
ShnikeJSB said:
YESSSSSS!!!
:victory:
Thank you SO very much!!! I now have wifi back after flashing with the gogolie nc2 file you named! Phew, these data overages were killing me... What a load off my back!
Click to expand...
Click to collapse
No problem. ...I found this zip usually does the trick.
Sent from my SCH-I545 using Tapatalk
decaturbob said:
No problem. ...I found this zip usually does the trick.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Are you flashing the NC2 Gogolies fix on the nc5 base with safestrap? I did try that along with flashing Hyperdrive 16.1 and required SU zip file, that still did not allow my wifi to work.
oiram14 said:
Are you flashing the NC2 Gogolies fix on the nc5 base with safestrap? I did try that along with flashing Hyperdrive 16.1 and required SU zip file, that still did not allow my wifi to work.
Click to expand...
Click to collapse
same with me
Make sure you have the latest SuperSU, though. I already had HyperDrive 16.1 installed on NC5 BL, and Towelroot let me root once again. Put the "gogolies-wififix-VZW-FN2-NC2-w-modules-SS.zip" file on your SD card. Make sure you have SELinux mode set to "Permissive" with SELinux Mode Changer. Then, get SafeStrap 3.72 and the new SuperSU 2.00. Give SS the permissions in SU, open SS and reboot to flash the "gogolies-wififix-VZW-FN2-NC2-w-modules-SS.zip" file. Reboot, and you should have Wi-Fi again!
So I've tried installing Hyperdrive multiple times on my S4 and I'm having issues. I bought the S4 used stock on the MK2 version. I rooted MK2 and then followed surges directions to upgrade to NC5 and retain my root. I currently am rooted running stock NC5 with Safestrap 3.72, and every time that I've created a ROM slot and attempted to install hyperdrive onto the phone, the aroma installer works great, I make sure that the ROM slot is active, and then I reboot. It boots up into the stock rom every time and the rom acts all glitchy and lags horribly. Also, if I plug a USB cable into the phone from the computer at that point, the phone just boot loops. I have followed the directions specifically for installing Hyperdrive to the letter multiple times, with no success. I end up going through surge's directions again to get to stock NC5 and then start all over again. Anyone have any clues what I'm doing wrong?
muzz3256 said:
So I've tried installing Hyperdrive multiple times on my S4 and I'm having issues. I bought the S4 used stock on the MK2 version. I rooted MK2 and then followed surges directions to upgrade to NC5 and retain my root. I currently am rooted running stock NC5 with Safestrap 3.72, and every time that I've created a ROM slot and attempted to install hyperdrive onto the phone, the aroma installer works great, I make sure that the ROM slot is active, and then I reboot. It boots up into the stock rom every time and the rom acts all glitchy and lags horribly. Also, if I plug a USB cable into the phone from the computer at that point, the phone just boot loops. I have followed the directions specifically for installing Hyperdrive to the letter multiple times, with no success. I end up going through surge's directions again to get to stock NC5 and then start all over again. Anyone have any clues what I'm doing wrong?
Click to expand...
Click to collapse
You can't create Rom slots with 3.72. Can ONLY flash to the stock slot.
Sent from my NCC-1701
muzz3256 said:
So I've tried installing Hyperdrive multiple times on my S4 and I'm having issues. I bought the S4 used stock on the MK2 version. I rooted MK2 and then followed surges directions to upgrade to NC5 and retain my root. I currently am rooted running stock NC5 with Safestrap 3.72, and every time that I've created a ROM slot and attempted to install hyperdrive onto the phone, the aroma installer works great, I make sure that the ROM slot is active, and then I reboot. It boots up into the stock rom every time and the rom acts all glitchy and lags horribly. Also, if I plug a USB cable into the phone from the computer at that point, the phone just boot loops. I have followed the directions specifically for installing Hyperdrive to the letter multiple times, with no success. I end up going through surge's directions again to get to stock NC5 and then start all over again. Anyone have any clues what I'm doing wrong?
Click to expand...
Click to collapse
you need to research info more....
clearly stated tht 3.72 safestrap does not support rom slots or installs to rom slots. This safestrap was released for att versions and has some limitations running on verizon phones
So then I need to uninstall SafeStrap 3.72 and reinstall 3.71 correct? I was thinking that was the problem, but the Hyperdrive thread is a long thread and I didn't read it all.
muzz3256 said:
So then I need to uninstall SafeStrap 3.72 and reinstall 3.71 correct? I was thinking that was the problem, but the Hyperdrive thread is a long thread and I didn't read it all.
Click to expand...
Click to collapse
No. 3.71 isn't compatible with 4.4. You have to use 3.72 for KitKat Roms.
Sent from my NCC-1701
So then how do I go about installing the latest hyperdrive that says it needs me to be on nc5?
muzz3256 said:
So then how do I go about installing the latest hyperdrive that says it needs me to be on nc5?
Click to expand...
Click to collapse
Assuming you already have root, the only way is to the stock slot of Safestrap 3.72.
Sent from my NCC-1701
riker147 said:
Assuming you already have root, the only way is to the stock slot of Safestrap 3.72.
Sent from my NCC-1701
Click to expand...
Click to collapse
I am rooted and am currently running safestrap 3.72. I'll give it a shot. I was under the impression that you never install anything other than stock in the stock slot, but I'm new to safestrap. This all makes me miss my GS4..
Thanks for all the help.
Also, just to be clear, I'll need to install hyperdrive and the nc5 module correct?
Sent from my SCH-I545 using XDA Premium HD app
muzz3256 said:
I am rooted and am currently running safestrap 3.72. I'll give it a shot. I was under the impression that you never install anything other than stock in the stock slot, but I'm new to safestrap. This all makes me miss my GS4..
Thanks for all the help.
Also, just to be clear, I'll need to install hyperdrive and the nc5 module correct?
Sent from my SCH-I545 using XDA Premium HD app
Click to expand...
Click to collapse
Correct. You should also flash Superuser. Some have reported losing root after flashing.
Sent from my NCC-1701
Awesome! Will do!
Sent from my SCH-I545 using XDA Premium HD app
edit
RLS 16.1 CWM Mod
Hi All, I am trying to upgrade from Hyperdrive RLS 9 to 16.1 on my S4. I am on MDK and using CWM as my recovery. I can see the RLS 16.1 ZIP file in my file manager and I can see it through CWM when I am running normally. The ZIP is loaded on the SD card on the phone.
The issue is when I boot into recovery and go into the clockwork folder to find the ZIP it doesn't show up. Not sure why CWM isn't seeing the ZIP files.
Any thoughts? Thanks
Hi all,
I previously had my GS4 rooted on JellyBean, running the stock ROM and ClockworkMod. I upgraded my phone with the Verizon update to 4.4.2 when the update came out. I am now on the NC5 build. I am now trying to root my phone again, to run a different ROM. I still have Rom Manager and SuperSU on my phone from the last root.
I tried using Towelroot yesterday. It said the root was successful. I was able to go into Rom Manager and update CWM, which also said it flashed successfully. SuperSU is working. However, when I try to boot into CWM, it boots into the stock (I think) recovery. I'm trying to run a nandroid backup before I do anything drastic.
Do I have to wipe my device, and start fresh? It seems that CWM is installed, but the stock recovery is overriding it. Sorry if this is a noob-ish question. I've been out of the Root game since my Incredible.
Leach0789 said:
Hi all,
I previously had my GS4 rooted on JellyBean, running the stock ROM and ClockworkMod. I upgraded my phone with the Verizon update to 4.4.2 when the update came out. I am now on the NC5 build. I am now trying to root my phone again, to run a different ROM. I still have Rom Manager and SuperSU on my phone from the last root.
I tried using Towelroot yesterday. It said the root was successful. I was able to go into Rom Manager and update CWM, which also said it flashed successfully. SuperSU is working. However, when I try to boot into CWM, it boots into the stock (I think) recovery. I'm trying to run a nandroid backup before I do anything drastic.
Do I have to wipe my device, and start fresh? It seems that CWM is installed, but the stock recovery is overriding it. Sorry if this is a noob-ish question. I've been out of the Root game since my Incredible.
Click to expand...
Click to collapse
I believe when you accept the Verizon OTA update it locks down custom recoveries like CWM/TWRP and the only option is SafeStrap.
scrillakev said:
I believe when you accept the Verizon OTA update it locks down custom recoveries like CWM/TWRP and the only option is SafeStrap.
Click to expand...
Click to collapse
Ah ha. Thanks for the reply. So can I proceed with installing SafeStrap, or do I need to uninstall CWM first?
Leach0789 said:
Ah ha. Thanks for the reply. So can I proceed with installing SafeStrap, or do I need to uninstall CWM first?
Click to expand...
Click to collapse
Yea if your on a Verizon s4 running any build after MDK... which you are... SafeStrap is your only option.
Hard to say what that will do to your phone after trying to install CWM.... usually it just soft bricks it and you need to Odin back to stock...
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Yea if your on a Verizon s4 running any build after MDK... which you are... SafeStrap is your only option.
Hard to say what that will do to your phone after trying to install CWM.... usually it just soft bricks it and you need to Odin back to stock...
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I just started the process of installing SafeStrap, but maybe I will wait until I'm home from work, in case I need to Odin..
Leach0789 said:
I just started the process of installing SafeStrap, but maybe I will wait until I'm home from work, in case I need to Odin..
Click to expand...
Click to collapse
May be a good idea just in case. I've seen some on here do the same as you with ROM manager and once they rebooted they were brought to the unauthorized software detected screen.... And without a recovery and a backup already made you'd be out of luck.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
May be a good idea just in case. I've seen some on here do the same as you with ROM manager and once they rebooted they were brought to the unauthorized software detected screen.... And without a recovery and a backup already made you'd be out of luck.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
It would probably be smart to remove CWM with Odin before attempting SafeStrap, correct? Is there a specific thread for removing CWM from a Verizon S4? I searched around but couldn't find anything specific to the S4.
Edit: I found a guide on NasirTech. Looks like that will work.
Leach0789 said:
It would probably be smart to remove CWM with Odin before attempting SafeStrap, correct? Is there a specific thread for removing CWM from a Verizon S4? I searched around but couldn't find anything specific to the S4.
Edit: I found a guide on NasirTech. Looks like that will work.
Click to expand...
Click to collapse
Well it didn't actually install it since your kernel doesn't allow for it now but what I would do is just use Odin and start over. Can use a No Wipe file and keep all your stuff.
You could try the method you found... I'm just not familiar with it.
Hard to say really how it will act. Maybe you'll have no issues at all just be able to install SafeStrap. Maybe you'll be able to install it but then it won't boot properly into it... who knows. Both have happened to me with my recovery ( CWM ),.. and using Odin was the only thing that helped.
Good luck .. I'm sure you'll get it going
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Well it didn't actually install it since your kernel doesn't allow for it now but what I would do is just use Odin and start over. Can use a No Wipe file and keep all your stuff.
You could try the method you found... I'm just not familiar with it.
Hard to say really how it will act. Maybe you'll have no issues at all just be able to install SafeStrap. Maybe you'll be able to install it but then it won't boot properly into it... who knows. Both have happened to me with my recovery ( CWM ),.. and using Odin was the only thing that helped.
Good luck .. I'm sure you'll get it going
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Thanks! Would you mind helping me find a correct no-wipe file? I found a couple files, but since I'm a new user I can't post links here, so I can't ask anyone if its the correct file or not!
Leach0789 said:
Thanks! Would you mind helping me find a correct no-wipe file? I found a couple files, but since I'm a new user I can't post links here, so I can't ask anyone if its the correct file or not!
Click to expand...
Click to collapse
Here you go!
http://forum.xda-developers.com/showthread.php?t=2735172
Yup... Tulsa you're quick!! Lol
Grab the NC5 No Wipe...
Sent from my SCH-I545 using Tapatalk
Tulsadiver said:
Here you go!
http://forum.xda-developers.com/showthread.php?t=2735172
Click to expand...
Click to collapse
Thanks! You guys rock.
I was rooted and on hyperdrive rls19 and everything was ok accept the dialer would not switch calls on call waiting. Rls20 came out so I figured I would give it a shot maybe it would fix the issue. It didn't... So I asked a question about it in the hyperdrive help section. It was suggested to install a dialer app for touch wiz. which seemed to install but did nothing. So last night I bit the bullet and did a full wipe install of Hyperdrive. Which didn't go well. Could not get back into android. Constant app crashing and issues. Out comes Odin with a pit file and 4.4.2 flash. Seems like it is back to stock.
Now for the issues. towelrooted and grabbed twrp manager to install recovery. It will not install recovery. Everytime I try to get into recovery even holding down up home and power it just goes to downloading. I am so at wits end!!! Please help!
jspector said:
I was rooted and on hyperdrive rls19 and everything was ok accept the dialer would not switch calls on call waiting. Rls20 came out so I figured I would give it a shot maybe it would fix the issue. It didn't... So I asked a question about it in the hyperdrive help section. It was suggested to install a dialer app for touch wiz. which seemed to install but did nothing. So last night I bit the bullet and did a full wipe install of Hyperdrive. Which didn't go well. Could not get back into android. Constant app crashing and issues. Out comes Odin with a pit file and 4.4.2 flash. Seems like it is back to stock.
Now for the issues. towelrooted and grabbed twrp manager to install recovery. It will not install recovery. Everytime I try to get into recovery even holding down up home and power it just goes to downloading. I am so at wits end!!! Please help!
Click to expand...
Click to collapse
What build are you on? If it's anything after MDK, you can't install a custom recovery because of the locked bootloader. Your only option is Safestrap.
Sent from my NCC-1701 using Tapatalk.
riker147 said:
What build are you on? If it's anything after MDK, you can't install a custom recovery because of the locked bootloader. Your only option is Safestrap.
Sent from my NCC-1701 using Tapatalk.
Click to expand...
Click to collapse
vfrufnc5 I believe!
jspector said:
vfrufnc5 I believe!
Click to expand...
Click to collapse
Then your only option is Safestrap. No custom recoveries.
How did you install RLS 19? Were you MDK before you used Odin?
riker147 said:
Then your only option is Safestrap. No custom recoveries.
How did you install RLS 19? Were you MDK before you used Odin?
Click to expand...
Click to collapse
I used safestrap to install RLS19. The problem I was having is every time I went into recovery it would 1st go into the downloading screen. and I would have to power and down volume to get to reboot and goto safestrap. Did I maybe odin in the wrong version when I fixed it last night? I cannot get Bluetooth working today at all.
jspector said:
I used safestrap to install RLS19. The problem I was having is every time I went into recovery it would 1st go into the downloading screen. and I would have to power and down volume to get to reboot and goto safestrap. Did I maybe odin in the wrong version when I fixed it last night? I cannot get Bluetooth working today at all.
Click to expand...
Click to collapse
How are you trying to get into recovery? Pretty sure the only way to do that with Safestrap is through the app itself.
As far as your Bluetooth issues, I have no idea. What file did you flash with Odin?
riker147 said:
How are you trying to get into recovery? Pretty sure the only way to do that with Safestrap is through the app itself.
As far as your Bluetooth issues, I have no idea. What file did you flash with Odin?
Click to expand...
Click to collapse
Download: VRUFNC5 Full-Wipe SCH-I545_VZW_1_20140330160240_8il17ls9o2_fac.zip
MD5: 8a22dd4a47c2c5f890227fd952657d38
That is the file I flashed in odin with pit file. I am not sure what I was in before.