I am trying to fix my i9300 UK.
I Had it running just fine with Ultima ROM and TWRP with Googy kernel.
Then one day it suddenly would not boot. Just got stuck on the samsung boot logo. I could not even boot to recovery.
So I asked and got a very short answer that I should flash the stock rom. So I downloaded the stock rom for my phone from sammobile and tried to flash it with ODIN.
However, I just get a FAILED sign when I try. What can I do?
Spacedementia87 said:
I am trying to fix my i9300 UK.
I Had it running just fine with Ultima ROM and TWRP with Googy kernel.
Then one day it suddenly would not boot. Just got stuck on the samsung boot logo. I could not even boot to recovery.
So I asked and got a very short answer that I should flash the stock rom. So I downloaded the stock rom for my phone from sammobile and tried to flash it with ODIN.
However, I just get a FAILED sign when I try. What can I do?
Click to expand...
Click to collapse
The i9300 is the international version. The us one is another depending on ur carrier.
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
The i9300 is the international version. The us one is another depending on ur carrier.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yeah I know,
I made sure to download the correct file
Spacedementia87 said:
Yeah I know,
I made sure to download the correct file
Click to expand...
Click to collapse
Try running as an administrator if you have done that try Odin v 1.85.
tallman43 said:
Try running as an administrator if you have done that try Odin v 1.85.
Click to expand...
Click to collapse
Yeah, I am running as admin.
I will try 1.85 now.
Thanks
tallman43 said:
Try running as an administrator if you have done that try Odin v 1.85.
Click to expand...
Click to collapse
When I use 1.85 I get:
Code:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
Spacedementia87 said:
When I use 1.85 I get:
Code:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Mmm! Couple of things you could try.. Try adb boot into recovery also try and flash PhilZ recovery with Odin look here and choose .tarmd5 version >> http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300 << also what does it say on your screen when you are in download mode.
tallman43 said:
Try running as an administrator if you have done that try Odin v 1.85.
Click to expand...
Click to collapse
JJEgan said:
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
Click to expand...
Click to collapse
This the the file I am trying:
I9300XXEMD2
Should be ok. I am on three.
I have looked in the task manager and can't see any reference to Kies on there. I guess I could uninstall just in case.
What is very worrying now is that I just tried to flash again using ODIN 3.04 and it said I needed a .pit file to repartition. Re-partition is not checked so I don't know why it is asking for this.
tallman43 said:
Mmm! Couple of things you could try.. Try adb boot into recovery also try and flash PhilZ recovery with Odin look here and choose .tarmd5 version >> << also what does it say on your screen when you are in download mode.
Click to expand...
Click to collapse
what do you mean by adb boot into recovery?
I will try to flash that custom recovery now.
While in download mode it says:
ODIN MODE
PRODUCT NAME: i9300
CUSTOM BINARY DOWNLOAD: 4
CURRENT BINARY: Samsung Official
System Status: Custom
UPDATE: Trying to flash that PhilZ recovery says I have not included a PIT file again. This is bad isnt it?
Spacedementia87 said:
what do you mean by adb boot into recovery?
I will try to flash that custom recovery now.
While in download mode it says:
ODIN MODE
PRODUCT NAME: i9300
CUSTOM BINARY DOWNLOAD: 4
CURRENT BINARY: Samsung Official
System Status: Custom
UPDATE: Trying to flash that PhilZ recovery says I have not included a PIT file again. This is bad isnt it?
Click to expand...
Click to collapse
Sorry Yes :crying: I think you need service damaged partition..
tallman43 said:
Sorry Yes :crying: I think you need service damaged partition..
Click to expand...
Click to collapse
How do I do that?
Spacedementia87 said:
How do I do that?
Click to expand...
Click to collapse
Warranty service center..
You can try what JJEgan suggested Quote:
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
But it's not looking good i'm afraid
tallman43 said:
Warranty service center..
You can try what JJEgan suggested Quote:
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
But it's not looking good i'm afraid
Click to expand...
Click to collapse
Damn
I guess I will have to pay for the repair.
Is there no way to find the official pit file and flash that?
Spacedementia87 said:
Damn
I guess I will have to pay for the repair.
Is there no way to find the official pit file and flash that?
Click to expand...
Click to collapse
Well I was going to suggest that but most of the posts I have seen from people who try to do that ended up with hard bricked phones I have never tried that and to be honest would never like to try doing it...But it's your phone!! if you try search option top of page their are some threads somewhere with instructions and pit files to download. Good Luck
Spacedementia87 said:
Damn
I guess I will have to pay for the repair.
Is there no way to find the official pit file and flash that?
Click to expand...
Click to collapse
Yes search the forum .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
tallman43 said:
Well I was going to suggest that but most of the posts I have seen from people who try to do that ended up with hard bricked phones I have never tried that and to be honest would never like to try doing it...But it's your phone!! if you try search option top of page their are some threads somewhere with instructions and pit files to download. Good Luck
Click to expand...
Click to collapse
Well thanks for the help.
I think I will take it in to get it fixed. I had the screen die on me not so long ago and had to take it in for a replacement screen then, so this is a little frustrating.
Oh well
Thank you very much
Related
hello,,
i have a problem with my galaxy s3 GT-I9300
the problem is that i flashed MIUI and it worked perfectly .. after that restarted my device and it repeat restarting.
so i got to recovery mode and it failed to flash any zip file. and failed to wipe to factory reset and failed to wipe data.
i was on CWM touch 5.0.5 but someone here adviced me to flash Philez Touch and after that i couldn't access recovery anymore
i tried to flash from odin a stock rom
Code:
I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
and here is the result
Code:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Download screen says the following
Code:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YES (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Downloading..
this is all i have .. please help me
thanks in advance
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
sriram231092 said:
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
Click to expand...
Click to collapse
tried all ports.
killed all samsung kies processes.
the problem is that i flashed a recovery file and it works but when flashing any rom it stuck !!!
Same answer nand damaged take to a service centre .
jje
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
flashing
Code:
recovery-cwmtouch-6.0.3.2-GTI9300.tar
result to successful
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
ground-zero said:
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
can you please provide me the link
thanks
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
Follow the steps in this thread.
If boots, then good, if not, then try flashing an ICS firmware. Download from Sammobile.
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
I had a similar problem with my I9305, would die at 23% of system.img. Fixed by re-flashing using Heimdall - after that, Odin also works again. Apparently a bug in Odin.
(However, in my case, the problem was not caused by repartitioning, nor did I need a PIT file to fix it.)
Sent from my GT-I9305 using xda app-developers app
eng.helewa said:
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
Click to expand...
Click to collapse
Have you flashed a firmware with single CSC, modem, code files ? When you make a repartition this is necessary. And you can try an other Odin vetsion. I use permanently 1.84 or change to Heimdall.
Hope this works !
Sent from my GT-I9300 using xda premium
Hi guys, forgive me about my bad english but i'm not english....ok, let's start with my problem.
Today i want to clean my gs3 because i want to make it return to standard condition (i had a 4.2.2 rom). So i follow a guide of an italian android forum (yes i'm italian) to make a deep clean. The problem is now, when i try to flash a stock rom with odin. I put the phone in download mode (in the counter i have only 2), odin recognize it and i press start, but the process stop and says this
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
the nand write fail, i think. I've tried a lot of thing, such as change pc or change cable, but always the same error. At least i try with the pit procedure, but always the same error. I can only enter in download mode rigght now, and when i swich on the phone normally it says "firmware upgrade encoutered an issue, Plese select recovery mode in Kies and try again.
I try the way by kies, but it didn't recognise the phone.
Plese, help me, i'm desperate....
what phone model? what file
Glebun said:
what phone model? what file
Click to expand...
Click to collapse
i have the gt-i9300 no brand and for the stock rom i use this I9300XXALE8_I9300OJVALE7_OJV
trasposone said:
i have the gt-i9300 no brand and for the stock rom i use this I9300XXALE8_I9300OJVALE7_OJV
Click to expand...
Click to collapse
nobody can help me? this is a very big problem, i need my s3,please i'm desperate
you can't bump your thread more than once every 24 hours, it's against the rules.
if you flashed a pit file, you need to send it to ser
trasposone said:
nobody can help me? this is a very big problem, i need my s3,please i'm desperate
Click to expand...
Click to collapse
Seeing as your firmware is pre-sds fix, you may have a damaged nand, ....try both these.
Can you boot into stock recovery?
Can you boot into download mode?
slaphead20 said:
Seeing as your firmware is pre-sds fix, you may have a damaged nand, ....try both these.
Can you boot into stock recovery?
Can you boot into download mode?
Click to expand...
Click to collapse
As well as slappy's suggestion, also post what it says for 'product name' when in download mode (if you can boot into download mode)..
Hey Guys,
I'm sure all of you get lots of these questions, however I have been trying for a couple of days to get this S3 going so I can just asking for help.
My main issue is I cannot flash any ROM's via Odin.
Here is some background infomation:
I started with a stock Galaxy S3 GT-i9300 International 16GB model.
Flashed the correct version of Cyanogen Mod for my Model/Sub Model.
I install this rom by flashing CWM (Clock Work Recovery Mod) and installing the update.zip from my external SD card.
I have done this before with other Samsung devices, No big deal, just factory rest and wipe the davik cache and flash the new ROM.
Well I decided to backup the original ROM via CWM's backup option. The backup completed fine but I backed it up to the phones internal storage instead of my External SD card. The new ROM worked fine till it ran out of space. So I selected the Delete option back in CWM to remove the backup file, rebooted the phone only to find I was still using 8 or so GB of storage.
So my phone was not happy. No room to download updates or save new pictures, etc.
This week I decided to flash the stock ROM back over the phone. For some reason the firmware was incorrect for that model or something was wrong with the phone.
After looking around I decided to flash a .pit file for the Galaxy S3, One problem, I did not know that different storage sizes of S3's have different .PIT files. However it flash and I still could not restore my phones ROM.
So after a few days of looking around I downloaded the stock ROM from Sam-Mobile.com for my phone and country and download GT-I9300_mx_20120220 PIT for for what I read and understood was for a 16GB GT-I9300.
So the new PIT file flashes fine, however I still cannot flash any new ROMS. I have tired the stock rom from Sam-Mobile or trying to flash Recovery-cwmtouch-6.0.3.2-GTI9300.tar (clock work recovery mod).
None of these flash. Odin3.04 just sits on "NAND Write Start!!" and there is a blue "downloading" bar that is across the screen and that's it.
Nothing else happens. I have also attached a screen shot of this.
I have a water damaged 16GB GT-i9300T that I have used to create a .PIT file from Heimdall, But that sits there for about 10 Min before Odin says "Unable to get pit map"
I have also tried this: http://forum.xda-developers.com/showthread.php?t=1916796
I get all the way to shorting out the resistor (R313) on the PCB but the phone does not turn on and fails to display "SD Card Mode"
So, can anyone help me?
I know it might be a long shot but at this point I'm willing to try anything. Any ideas would be much appreciated.
Cheers
Mitchell
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Thanks for that!, The recovery firmware failed to flash but the pit file flashed allowing me to install Cyanogen Mod.
Thanks for your help on this one :good:
boomboomer said:
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Click to expand...
Click to collapse
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Did u fix !!!
leo_hacker82 said:
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Click to expand...
Click to collapse
Did u fix ur phone??? same problem happend me
You're using the original Samsung USB cable?
audit13 said:
You're using the original Samsung USB cable?
Click to expand...
Click to collapse
yes.
What file is failing in Odin?
jtk585 said:
Did u fix ur phone??? same problem happend me
Click to expand...
Click to collapse
For getting error when flash in Odin no matter what kind of error. Just need to flash out and repartition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Yumiko87 said:
For getting error when flash in Odin no matter what kind of error. Just need to flash out and re-partition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Click to expand...
Click to collapse
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 :laugh: tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...:laugh::laugh:
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
jtk585 said:
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 [emoji23] tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...[emoji23][emoji23]
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
Click to expand...
Click to collapse
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Yumiko87 said:
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Click to expand...
Click to collapse
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash :laugh:
thanks
jtk585 said:
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash [emoji23]
thanks
Click to expand...
Click to collapse
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Yumiko87 said:
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Click to expand...
Click to collapse
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
i forget say one thing, when i choose boot loader file BL sboot.bin file is stuck... freeze.....
jtk585 said:
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726[/QUOTE]
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on
jtk585 said:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on [/QUOTE]
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
audit13 said:
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
Click to expand...
Click to collapse
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.[/QUOTE]
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks
jtk585 said:
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
Click to expand...
Click to collapse
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks[/QUOTE]
This will only for n9005. Not 9305.
I have the i9300 but when I boot up into download mode it says PRODUCT NAME: SGH-T999 (not my model, though). I think this is because I accidently installed the SGH-T999 version of cyangomenod.
So to try to fix it, I used odin 3.07 and the
"I9300ZSEMC1"
stock rom file to try to put it back onto stock. Odin "stopped working" and crashed and I soft-bricked my phone (Firmware upgrade encountered an issue message at boot).
I tried again using I9300XXEMC3 stock rom, but odin 3.04 says
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
And fails. My phone says "unsupported dev_type" in red.
Can I please get some guidance? I don't know what I did wrong. What rom should I flash with odin? Should I try to flash the SGH-T999 stock rom with odin?
zhinkk said:
I have the i9300 but when I boot up into download mode it says PRODUCT NAME: SGH-T999 (not my model, though). I think this is because I accidently installed the SGH-T999 version of cyangomenod.
So to try to fix it, I used odin 3.07 and the
"I9300ZSEMC1"
stock rom file to try to put it back onto stock. Odin "stopped working" and crashed and I soft-bricked my phone (Firmware upgrade encountered an issue message at boot).
Can I please get some guidance? I don't know what I did wrong. What rom should I flash with odin? Should I try to flash the SGH-T999 stock rom with odin?
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=2535367
Hope it help.
TheoDores said:
Try this: http://forum.xda-developers.com/showthread.php?t=2535367
Hope it help.
Click to expand...
Click to collapse
I tried following those instructions. I managed to flash the .PIT file. Now I don't see the error message at boot, my screen is just black. BUT I can "sorta" boot into recovery mode (starting recovery message shows for one second, then black screen again). So I'm still stuck.
I can STILL boot into download mode though. And if I try to use CF-Root Odin fails again (same error) and my phone says "unsupported_devtype".
Flash stock rom via Odin .
But flashing a wrong firmware for a different phone may well be a lot more than a soft brick
Did you also flash wrong recovery ???
JJEgan said:
Flash stock rom via Odin .
But flashing a wrong firmware for a different phone may well be a lot more than a soft brick
Did you also flash wrong recovery ???
Click to expand...
Click to collapse
Everytime I flash the stock rom odin fails and phone says "unsupported dev_type". In Download mode it says my phone model is T999, but it's actual GT-I9300.
And I don't think I did. I think I had clockwork mod recovery, I'm not too sure though.
You have flashed at least the T999 bootloader, which is why it says that in download mode. If flashing a full i9300 stock rom doesn't help then you'll need a new motherboard.
boomboomer said:
You have flashed at least the T999 bootloader, which is why it says that in download mode. If flashing a full i9300 stock rom doesn't help then you'll need a new motherboard.
Click to expand...
Click to collapse
That really depresses me. Are you sure this is the only solution? Because I remember when my phone WAS working I booted into download mode once and it said the same "T999 Model" and I could still use it. This only happened after I tried flashing the stock i9300 stock rom.
I think it's the cyanogenmod installer that flashed this T999 bootloader for me. When I used the cyanogenmod installer it detected my phone as a AT&T phone and I was dumb enough to click "install" thinking it would work for all galaxy S3's.
I think this guide is exactly what I need (since it restores bootloader), but I can't seem to complete all the steps: http://forum.xda-developers.com/showthread.php?t=2535367
I get to #5 but once I try to install CF-ROOT through odin it says the same unsupported dev type error on my phone.
This is the error I get when trying to use CF-ROOT through Odin3 v1.85:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
(along with the red "Unsupported dev_type" on my phone in download mode).
I think it was already rooted though, maybe someone could help me reinstall the recovery (cwm) so I can install the bootloader from that guide I just linked?
Best option is to try a rescue firmware, which might help:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=8215224728919566
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Best option is to try a rescue firmware, which might help:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=8215224728919566
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Will this delete my EFS? I remember I backed up efs with this guide: http://forum.xda-developers.com/showthread.php?t=1852255
I did: "adb reboot nvbackup"
By restoring to "complete" factory settings, won't this efs be deleted? Can I still backup my efs in my 'soft brick' mode I'm in?
Alright, I've tried using the rescure firmware and all the files, but every time I try I get it a FAIL on odin:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And my phone says in red "SECURE CHECK FAIL : PIT".
I've spent 12 hours on this now...
Did you try Kies yet?
Do you still have a custom recovery?
I'm not sure about that adb nvbackup you have done. As far as i know it's only for Qualcomm chipsets not Exynos. Maybe you have severely damaged the device. But try Kies first or if you still have root access with recovery try to flash the bootloader manually.
If everything fails contact the low level guys like @AdamOutler or @Entropy512. They might be your last hope.
DualJoe said:
Did you try Kies yet?
Do you still have a custom recovery?
I'm not sure about that adb nvbackup you have done. As far as i know it's only for Qualcomm chipsets not Exynos. Maybe you have severely damaged the device. But try Kies first or if you still have root access with recovery try to flash the bootloader manually.
If everything fails contact the low level guys like @AdamOutler or @Entropy512. They might be your last hope.
Click to expand...
Click to collapse
I tried Kies on two different computers, but whenever I connect my S3 it just says "connecting" forever and never connects to my phone. Tried solutions online, couldn't get it to work.
And I have root access, but can't boot into recovery (says "recovery booting" for a few seconds then goes black screen). So I don't know if I can flash the bootloader manually, unless I did it with odin.
And those seem like busy developers, would they really have time for me? I don't even know what I would ask. :S
Sorry I seem so clueless, I'm just upset/sad/confused/everything right now. Saved up for this phone for a while.
Try to flash the bootloader only. There are different ones. Maybe you need one that is not blacklisted if that's even possible.
Last option that comes to my mind is an external jtag flasher. Maybe you have a local service shop or similar in your area that could help with that.
DualJoe said:
Try to flash the bootloader only. There are different ones. Maybe you need one that is not blacklisted if that's even possible.
Last option that comes to my mind is an external jtag flasher. Maybe you have a local service shop or similar in your area that could help with that.
Click to expand...
Click to collapse
Hmm when I had a functional phone it said I had the ZSEMC1 stock rom, so the "bootLoader_ZSEMC1.tar.md5" flashed from odin should work? I got it off this thread: http://forum.xda-developers.com/showthread.php?t=2189063
But I don't know if I'm still on ZSEMC1 since I flashed XXEMC3 with odin (but I think it failed) and I got soft bricked.
What could go wrong? Could I hard brick it by installing that bootloader?
I have no clue but i think all I9300 bootloaders would be ok. Your problem probably is rather to find one that gets accepted. Try the latest one for I9300. There is a thread with different bootloaders somewhere here i guess.
Also try to flash a custom recovery like twrp or cwm. I'm not sure if official tools like odin have a separate bootloader check that prevents cross model flashing. No one really knows how you did that. Maybe it's necessary to be done with dd.
DualJoe said:
I have no clue but i think all I9300 bootloaders would be ok. Your problem probably is rather to find one that gets accepted. Try the latest one for I9300. There is a thread with different bootloaders somewhere here i guess.
Also try to flash a custom recovery like twrp or cwm. I'm not sure if official tools like odin have a separate bootloader check that prevents cross model flashing. No one really knows how you did that. Maybe it's necessary to be done with dd.
Click to expand...
Click to collapse
I tried the ZSEMC1 and XXEMC3 and XXEMG5 bootloaders from this thread and they didn't work: http://forum.xda-developers.com/showthread.php?t=2189063
(shows unsupported dev type)
How do I get the 'latest' boot loader? That thread is the only one I could really find.
And also I did try installing cwm through odin. It didn't "fail" but it doesn't work when I try to boot into recovery. I'm guessing this has to do with my locked bootloader?
Really don't know what to do at this point. :/
New motherboard if you have tried the fixes .
Check if 'adb shell' is working in recovery nevertheless. Maybe it's just a display issue in cwm. Also try twrp.
If all that fails go to a mobile shop near you asking for a jtag flash. It shouldn't be too expensive or something. Hardest part is probably to find one locally...
DualJoe said:
Check if 'adb shell' is working in recovery nevertheless. Maybe it's just a display issue in cwm. Also try twrp.
If all that fails go to a mobile shop near you asking for a jtag flash. It shouldn't be too expensive or something. Hardest part is probably to find one locally...
Click to expand...
Click to collapse
I tried cwm and twrp. They both install successfully on odin but have the same "recovery starting...." message and they don't work. I've tried connecting the USB when it's in this "recovery" mode but my computer doesn't detect it so I can't start up adb and interface with it.
And also, I doubt I'm going to be able to find any in northwest ohio.I wonder if this service is any good?
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Looks promising for $50.
Sorry I've been on this problem for so long guys, I'm just stubborn and can't get over the fact that it's a software brick and I need to replace hardware. :/
HTML:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNH4_I9300VFGGNH2_I9300BUUGNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
thats what i get in odin when trying to flash a stock samsung rom. The phone doesnt go on recovery mode
is my s3 soft bricked? is there any way i can restore photos? or even the phone?
bump_?
patriotaki said:
HTML:
<ID:0/004> Added!!<OSM> Enter CS for MD5..<OSM> Check MD5.. Do not unplug the cable..<OSM> Please wait..<OSM> I9300XXUGNH4_I9300VFGGNH2_I9300BUUGNF1_HOME.tar.md5 is valid.<OSM> Checking MD5 finished Sucessfully..<OSM> Leave CS..<ID:0/004> Odin v.3 engine (ID:4)..<ID:0/004> File analysis..<ID:0/004> SetupConnection..<ID:0/004> Initialzation..<ID:0/004> Get PIT for mapping..<ID:0/004> <ID:0/004> There is no PIT partition.<OSM> All threads completed. (succeed 0 / failed 1)<ID:0/004> Removed!!
thats what i get in odin when trying to flash a stock samsung rom. The phone doesnt go on recovery mode
is my s3 soft bricked? is there any way i can restore photos? or even the phone?
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?p=39045064
KeTuRr74 said:
Try this
http://forum.xda-developers.com/showthread.php?p=39045064
Click to expand...
Click to collapse
the download link for the stock rom is broken
i have tried with a different rom 4.3 and in the zip file it has only the tar md5 file and one dll file.
I tried and gettting the NO PIT Partition error
please help me
patriotaki said:
the download link for the stock rom is broken
i have tried with a different rom 4.3 and in the zip file it has only the tar md5 file and one dll file.
I tried and gettting the NO PIT Partition error
please help me
Click to expand...
Click to collapse
Try another usb port.Pit error can come from the usb port.
KeTuRr74 said:
Try another usb port.Pit error can come from the usb port.
Click to expand...
Click to collapse
no luck
patriotaki said:
no luck
Click to expand...
Click to collapse
Try the rescue firmware here it includes a pit file >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << their are two downloads the pit file you need is in the 4.1 download and can be used on both roms.
patriotaki said:
no luck
Click to expand...
Click to collapse
This time you need to found a PIT file for S3 and flash it with ODIN don't forget to tick Re-Partition
Try this first :
http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
tallman43 said:
Try the rescue firmware here it includes a pit file >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << their are two downloads the pit file you need is in the 4.1 download and can be used on both roms.
Click to expand...
Click to collapse
i was running 4.3 .. u sure i need to download 4.1.2 ?
im getting stuck to getting PIT for mapping
patriotaki said:
i was running 4.3 .. u sure i need to download 4.1.2 ?
Click to expand...
Click to collapse
No if you on 4.3 stay with that because of imei problems. It's just that in the link 4.1 had the pit file included and 4.3 didn't. Try the link that @KeTuRr74 gave you and make sure if you have kies on your computer to uninstall it.
Edit also try Odin 1.85 from here >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
tallman43 said:
No if you on 4.3 stay with that because of imei problems. It's just that in the link 4.1 had the pit file included and 4.3 didn't. Try the link that @KeTuRr74 gave you and make sure if you have kies on your computer to uninstall it.
Edit also try Odin 1.85 from here >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Click to expand...
Click to collapse
i should unistall kies?
patriotaki said:
i should unistall kies?
Click to expand...
Click to collapse
Yes it can interfere with Odin also try Odin 1.85 in the link I have you.But to be honest it looks like you need a service repair.
tallman43 said:
Yes it can interfere with Odin also try Odin 1.85 in the link I have you.But to be honest it looks like you need a service repair.
Click to expand...
Click to collapse
i always get stuck on Get PIT for mapping..
what should i do
tallman43 said:
Yes it can interfere with Odin also try Odin 1.85 in the link I have you.But to be honest it looks like you need a service repair.
Click to expand...
Click to collapse
at least can i restore my photos? or all my data are gone?
patriotaki said:
at least can i restore my photos? or all my data are gone?
Click to expand...
Click to collapse
Do you tick Repartition case ?
Try to flash a custom recovery and try if you can do a backup